Structural changes of the active site tunnel of Humicola insolens cellobiohydrolase, Cel6A, upon oligosaccharide binding

Mutational analysis of predicted active site residues of an exoglucanase secreted by Xanthomonas oryzae pv. oryzae to determine their role in catalysis and in virulence on rice

Xanthomonas oryzae pv. oryzae (Xoo) causes bacterial blight disease in rice. As a part of its virulence repertoire, Xoo secretes a cell wall degrading enzyme Cellobiosidase (CbsA), which is a critical virulence factor and also a determinant of tissue specificity. CbsA protein is made up of an N-terminal catalytic domain and a C-terminal fibronectin type III domain. According to the CAZy classification, the catalytic domain of CbsA protein belongs to the glycosyl hydrolase-6 (GH6) family that performs acid-base catalysis. However, the identity of the catalytic acid and the catalytic base of CbsA is not known. Based on the available structural and biochemical data, we identified putative catalytic residues and probed them by site-directed mutagenesis. Intriguingly, the biochemical analysis showed that none of the mutations abolishes the catalytic activity of CbsA, an observation that is contrary to other GH6 family members. All the mutants exhibited altered enzymatic activity and caused significant virulence deficiency in Xoo emphasising the requirement of specific exoglucanase activity of wild-type CbsA for virulence on rice. Our study highlights the need for further studies and the detailed characterisation of bacterial exoglucanases.

Contribution of calcium ligands in substrate binding and product release in the Acetovibrio thermocellus glycoside hydrolase family 9 cellulase CelR

Enzymatic deconstruction of lignocellulosic biomass is crucial to establishment of the renewable biofuel and bioproduct economy. Better understanding of these enzymes, including their catalytic and binding domains, and other features offer potential avenues for improvement. Glycoside hydrolase family 9 (GH9) enzymes are attractive targets because they have members that exhibit exo- and endo-cellulolytic activity, processivity of reaction, and thermostability. This study examines a GH9 from Acetovibrio thermocellus ATCC 27405, AtCelR containing a catalytic domain and a carbohydrate binding module (CBM3c). Crystal structures of the enzyme without substrate, bound to cellohexaose (substrate) or cellobiose (product), show the positioning of ligands to calcium and adjacent residues in the catalytic domain that may contribute to substrate binding and facilitate product release. We also investigated the properties of the enzyme engineered to contain an additional carbohydrate binding module (CBM3a). Relative to the catalytic domain alone, CBM3a gave improved binding for Avicel (a crystalline form of cellulose), and catalytic efficiency (kcat/KM) was improved 40× with both CBM3c and CBM3a present. However, because of the molecular weight added by CBM3a, the specific activity of the engineered enzyme was not increased relative to the native construct consisting of only the catalytic and CBM3c domains. This work provides new insight into a potential role of the conserved calcium in the catalytic domain and identifies contributions and limitations of domain engineering for AtCelR and perhaps other GH9 enzymes.

Role of the FnIII domain associated with a cell wall-degrading enzyme cellobiosidase of Xanthomonas oryzae pv. oryzae

Cellobiosidase (CbsA) is an important secreted virulence factor of Xanthomonas oryzae pv. oryzae (Xoo), which causes bacterial blight of rice. CbsA is one of several cell wall-degrading enzymes secreted by Xoo via the type II secretion system (T2SS). CbsA is considered a fundamental virulence factor for vascular pathogenesis. CbsA has an N-terminal glycosyl hydrolase domain and a C-terminal fibronectin type III (FnIII) domain. Interestingly, the secreted form of CbsA lacks the FnIII domain during in planta growth. Here we show that the presence of the FnIII domain inhibits the enzyme activity of CbsA on polysaccharide substrates like carboxymethylcellulose. The FnIII domain is required for the interaction of CbsA with SecB chaperone, and this interaction is crucial for the stability and efficient transport of CbsA across the inner membrane. Deletion of the FnIII domain reduced virulence similar to ΔcbsA Xoo, which corroborates the importance of the FnIII domain in CbsA. Our work elucidates a hitherto unknown function of the FnIII domain in enabling the virulence-promoting activity of CbsA.

Impact of cellulose properties on enzymatic degradation by bacterial GH48 enzymes: Structural and mechanistic insights from processive Bacillus licheniformis Cel48B cellulase

Processive cellulases are highly efficient molecular engines involved in the cellulose breakdown process. However, the mechanism that processive bacterial enzymes utilize to recruit and retain cellulose strands in the catalytic site remains poorly understood. Here, integrated enzymatic assays, protein crystallography and computational approaches were combined to study the enzymatic properties of the processive BlCel48B cellulase from Bacillus licheniformis. Hydrolytic efficiency, substrate binding affinity, cleavage patterns, and the apparent processivity of bacterial BlCel48B are significantly impacted by the cellulose size and its surface morphology. BlCel48B crystallographic structure was solved with ligands spanning -5 to -2 and +1 to +2 subsites. Statistical coupling analysis and molecular dynamics show that co-evolved residues on active site are critical for stabilizing ligands in the catalytic tunnel. Our results provide mechanistic insights into BlCel48B molecular-level determinants of activity, substrate binding, and processivity on insoluble cellulose, thus shedding light on structure-activity correlations of GH48 family members in general.

Revisiting the Phenomenon of Cellulase Action: Not All Endo- and Exo-Cellulase Interactions Are Synergistic

The conventional endo–exo synergism model has extensively been supported in literature, which is based on the perception that endoglucanases (EGs) expose or create accessible sites on the cellulose chain to facilitate the action of processive cellobiohydrolases (CBHs). However, there is a lack of information on why some bacterial and fungal CBHs and EGs do not exhibit synergism. Therefore, the present study evaluated and compared the synergistic relationships between cellulases from different microbial sources and provided insights into how different GH families govern synergism. The results showed that CmixA2 (a mixture of TlCel7A and CtCel5A) displayed the highest effect with BaCel5A (degree of synergy for reducing sugars and glucose of 1.47 and 1.41, respectively) in a protein mass ratio of 75–25%. No synergism was detected between CmixB1/B2 (as well as CmixC1/C2) and any of the EGs, and the combinations did not improve the overall cellulose hydrolysis. These findings further support the hypothesis that “not all endo-to exo-cellulase interactions are synergistic”, and that the extent of synergism is dependent on the composition of cellulase systems from various sources and their compatibility in the cellulase cocktail. This method of screening for maximal compatibility between exo- and endo-cellulases constitutes a critical step towards the design of improved synergistic cellulose-degrading cocktails for industrial-scale biomass degradation.

Convergent evolution of processivity in bacterial and fungal cellulases

Some cellulases exhibit “processivity”: the ability to degrade crystalline cellulose through successive hydrolytic catalytic reactions without the release of the enzyme from the substrate surface. We previously observed the movement of fungal processive cellulases by high-speed atomic force microscopy, and here, we use the same technique to directly observe the processive movement of bacterial cellobiohydrolases settling a long-standing controversy. Although fungal and bacterial processive cellulases have completely different protein folds, they have evolved to acquire processivity through the same strategy of adding subsites to extend the substrate-binding site and forming a tunnel-like active site by increasing the number of loops covering the active site. This represents an example of protein-level convergent evolution to acquire the same functions from different ancestors.

Cellulose is the most abundant biomass on Earth, and many microorganisms depend on it as a source of energy. It consists mainly of crystalline and amorphous regions, and natural degradation of the crystalline part is highly dependent on the degree of processivity of the degrading enzymes (i.e., the extent of continuous hydrolysis without detachment from the substrate cellulose). Here, we report high-speed atomic force microscopic (HS-AFM) observations of the movement of four types of cellulases derived from the cellulolytic bacteria Cellulomonas fimi on various insoluble cellulose substrates. The HS-AFM images clearly demonstrated that two of them (CfCel6B and CfCel48A) slide on crystalline cellulose. The direction of processive movement of CfCel6B is from the nonreducing to the reducing end of the substrate, which is opposite that of processive cellulase Cel7A of the fungus Trichoderma reesei (TrCel7A), whose movement was first observed by this technique, while CfCel48A moves in the same direction as TrCel7A. When CfCel6B and TrCel7A were mixed on the same substrate, “traffic accidents” were observed, in which the two cellulases blocked each other’s progress. The processivity of CfCel6B was similar to those of fungal family 7 cellulases but considerably higher than those of fungal family 6 cellulases. The results indicate that bacteria utilize family 6 cellulases as high-processivity enzymes for efficient degradation of crystalline cellulose, whereas family 7 enzymes have the same function in fungi. This is consistent with the idea of convergent evolution of processive cellulases in fungi and bacteria to achieve similar functionality using different protein foldings.

Role of glycine 256 residue in improving the catalytic efficiency of mutant endoglucanase of family 5 glycoside hydrolase from Bacillus amyloliquefaciens SS35

Wild-type, BaGH5-WT and mutant, BaGH5-UV2 (aspartate residue mutated to glycine), endoglucanases belonging to glycoside hydrolase family 5 (GH5), from wild-type, and UV2 mutant strain of Bacillus amyloliquefaciens SS35, respectively, were earlier cloned in pHTP0 cloning vector. In this study, genes encoding BaGH5-WT or BaGH5-UV2 were cloned into pET28a(+) expression-vector and expressed in Escherichia coli BL-21(DE3)pLysS cells. BaGH5-UV2 showed 10-fold (43.6 U/mg) higher specific activity against carboxymethylcellulose sodium salt (CMC-Na), higher optimal temperature by 10°C at 65°C, and 22-fold higher catalytic efficiency against CMC-Na, than BaGH5-WT. BaGH5-UV2 showed stability in wider acidic pH range (5.0-7.0) unlike BaGH5-WT in narrow basic pH range (7.0-7.5). BaGH5-UV2 displayed a mutation, Asp256Gly in L11 loop, connecting β₆ -sheet with α₆ -helix, near active site toward the domain surface of (α/β)₈ -TIM barrel fold. Molecular dynamics simulation studies showed more stable structure, accessibility of substrate for a catalytic site, and increased flexibility of loop L11 of BaGH5-UV2 than the wild type, suggesting enhanced catalysis by BaGH5-UV2. Molecular docking analysis displayed enhanced hydrogen bond interactions of cello-oligosaccharides with BaGH5-UV2, unlike BaGH5-WT. Thus, Gly256 residue of loop L11 plays an important role in enhancing catalytic efficiency, and pH stability of GH5 endoglucanase. Therefore, these results help in protein engineering of GH5 endoglucanase for improved biochemical properties.

A mutation in an exoglucanase of Xanthomonas oryzae pv. oryzae, which confers an endo mode of activity, affects bacterial virulence, but not the induction of immune responses, in rice

Xanthomonas oryzae pv. oryzae (Xoo) causes bacterial blight, a serious disease of rice. Xoo secretes a repertoire of cell wall-degrading enzymes, including cellulases, xylanases and pectinases, to degrade various polysaccharide components of the rice cell wall. A secreted Xoo cellulase, CbsA, is not only a key virulence factor of Xoo, but is also a potent inducer of innate immune responses of rice. In this study, we solved the crystal structure of the catalytic domain of the CbsA protein to a resolution of 1.86 Å. The core structure of CbsA shows a central distorted TIM barrel made up of eight β strands with N- and C-terminal loops enclosing the active site, which is a characteristic structural feature of an exoglucanase. The aspartic acid at the 131st position of CbsA was predicted to be important for catalysis and was therefore mutated to alanine to study its role in the catalysis and biological functions of CbsA. Intriguingly, the D131A CbsA mutant protein displayed the enzymatic activity of a typical endoglucanase. D131A CbsA was as proficient as wild-type (Wt) CbsA in inducing rice immune responses, but was deficient in virulence-promoting activity. This indicates that the specific exoglucanase activity of the Wt CbsA protein is required for this protein to promote the growth of Xoo in rice.

Insights into the structural characteristics and substrate binding analysis of chondroitin AC lyase (PsPL8A) from Pedobacter saltans

The structure of chondroitin AC lyase (PsPL8A) of family 8 polysaccharide lyase was characterized. Modeled PsPL8A structure showed, it contains N-terminal (α/α)₆ incomplete toroidal fold and a layered β sandwich structure at C-terminal. Ramchandran plot displayed 98.5% residues in favoured and 1.2% in generously allowed region. Secondary structure of PsPL8A by CD revealed 27.31% α helices 22.7% β sheets and 49.9% random coils. Protein melting study showed, PsPL8A completely unfolds at 60°C. SAXS analysis showed, PsPL8A is fully folded in solution form. The ab initio derived dummy model of PsPL8A superposed well with its modeled structure excluding some α-helices and loop region. Structural superposition and docking analysis showed, N153, W105, H203, Y208, Y212, R266 and E349 were involved in catalysis. Mutants N153A, H203A, Y212F, R266A and E349A created by SDM revealed no residual activity. Isothermal titration calorimetry analysis of Y212F and H203A with C4S polysaccharide, showed moderate binding by Y212F (Ka=9.56±3.81×10⁵) and no binding with H203A, showing active contribution of Y212 in substrate binding. Residues Y212 and H203 or R266 might act as general base and general acid respectively. Residues N153 and E349 are likely contributing in charge neutralization and stabilizing enolate anion intermediate during β-elimination.

Concerted motions and large-scale structural fluctuations of Trichoderma reesei Cel7A cellobiohydrolase

Cellobiohydrolases (CBHs) are key enzymes for the saccharification of cellulose and play major roles in industrial settings for biofuel production. The catalytic core domain of these enzymes exhibits a long and narrow binding tunnel capable of binding glucan chains from crystalline cellulose and processively hydrolyze them. The binding cleft is topped by a set of loops, which are believed to play key roles in substrate binding and cleavage processivity. Here, we present an analysis of the loop motions of the Trichoderma reesei Cel7A catalytic core domain (TrCel7A) using conventional and accelerated molecular dynamics simulations. We observe that the loops exhibit highly coupled fluctuations and cannot move independently of each other. In the absence of a substrate, the characteristic large amplitude dynamics of TrCel7A consists of breathing motions, where the loops undergo open-and-close fluctuations. Upon substrate binding, the open-close fluctuations of the loops are quenched and one of the loops moves parallel to the binding site, possibly to allow processive motion along the glucan chain. Using microsecond accelerated molecular dynamics, we observe large-scale fluctuations of the loops (up to 37 Å) and the entire exposure of the TrCel7A binding site in the absence of the substrate, resembling an endoglucanase. These results suggest that the initial CBH-substrate contact and substrate recognition by the enzyme are similar to that of endoglucanases and, once bound to the substrate, the loops remain closed for proper enzymatic activity.

The use of Agrobacterium-mediated insertional mutagenesis sequencing to identify novel genes of Humicola insolens involved in cellulase production

A transfer DNA (T-DNA)-tagged mutant library of Humicola insolens was screened for mutants with altered cellulase production using the plate-clearing zone assay. Three selected mutants (5-A7, 5-C6, and 13-B7) exhibited significantly depressed FPase, CMCase and xylanase activities compared with the wild-type strain upon shake-flask fermentation, while the pNPCase and pNPGase activities of the three mutants were relatively higher than those of the parental strain. Combined with the results of SDS-PAGE and mass spectrometry, we suggest that expression of the CMCases Cel6B, Cel7B, CMC3, and XynA/B/C was reduced in the mutant strains. Twelve putative T-DNA insertion sites were identified in the three mutants via Agrobacterium-mediated insertional mutagenesis sequencing (AIM-Seq). Bioinformatics analysis suggested that a putative dolichyl pyrophosphate phosphatase, two hypothetical proteins encoding genes of unknown function, and/or nine intergenic fragments may be involved in cellulase and hemicellulase production by H. insolens. This provides promising new candidate genes relevant to cellulase production by the fungus, which will be crucial not only for our understanding of the molecular mechanism underlying cellulase production, but also for strain improvement.

Enhancing the catalytic activity of a novel GH5 cellulase GtCel5 from Gloeophyllum trabeum CBS 900.73 by site-directed mutagenesis on loop 6

BACKGROUND

Cellulases of glycosyl hydrolase (GH) family 5 share a (β/α)₈ TIM-barrel fold structure with eight βα loops surrounding the catalytic pocket. These loops exposed on the surface play a vital role in protein functions, primarily due to the interactions of some key amino acids with solvent and ligand molecules. It has been reported that motions of these loops facilitate substrate access and product release, and loops 6 and 7 located at the substrate entrance of the binding pocket promote proton transfer reaction at the catalytic site motions. However, the role of these flexible loops in catalysis of GH5 cellulase remains to be explored.

RESULTS

In the present study, an acidic, mesophilic GH5 cellulase (with optimal activity at pH 4.0 and 70 °C), GtCel5, was identified in Gloeophyllum trabeum CBS 900.73. The specific activities of GtCel5 toward CMC-Na, barley β-glucan, and lichenan were 1117 ± 43, 6257 ± 26 and 5318 ± 54 U/mg, respectively. Multiple sequence alignment indicates that one amino acid residue at position 233 on the loop 6 shows semi-conservativeness and might contribute to the great catalytic performance. Saturation mutagenesis at position 233 was then conducted to reveal the vital roles of this position in enzyme properties. In comparison to the wild type, variants N233A and N233G showed decreased optimal temperature (- 10 °C) but increased activities (27 and 70%) and catalytic efficiencies (k_cat/K_m; 45 and 52%), respectively. The similar roles of position 233 in catalytic performance were also verified in the other two GH5 homologs, TeEgl5A and PoCel5, by reverse mutation. Further molecular dynamics simulations suggested that the substitution of asparagine with alanine or glycine may introduce more hydrogen bonds, increase the flexibility of loop 6, enhance the interactions between enzyme and substrate, and thus improve the substrate affinity and catalytic efficiency.

CONCLUSION

This study proposed a novel cellulase with potentials for industrial application. A specific position was identified to play key roles in cellulase-substrate interactions and enzyme catalysis. It is of great importance for understanding the binding mechanism of GH5 cellulases, and provides an effective strategy to improve the catalytic performance of cellulases.

Carbohydrate-active enzymes: sequences, shapes, contortions and cells

The enzyme-catalysed degradation of oligo and polysaccharides is of considerable interest in many fields ranging from the fundamental–understanding the intrinsic chemical beauty–through to the applied, including diverse practical applications in medicine and biotechnology. Carbohydrates are the most stereochemically-complex biopolymer, and myriad different natural polysaccharides have led to evolution of multifaceted enzyme consortia for their degradation. The glycosidic bonds that link sugar monomers are among the most chemically-stable, yet enzymatically-labile, bonds in the biosphere. That glycoside hydrolases can achieve a rate enhancement (kcat/kuncat) >1017-fold provides testament to their remarkable proficiency and the sophistication of their catalysis reaction mechanisms. The last two decades have seen significant advances in the discovery of new glycosidase sequences, sequence-based classification into families and clans, 3D structures and reaction mechanisms, providing new insights into enzymatic catalysis. New impetus to these studies has been provided by the challenges inherent in plant and microbial polysaccharide degradation, both in the context of environmentally-sustainable routes to foods and biofuels, and increasingly in human nutrition. Study of the reaction mechanism of glycoside hydrolases has also inspired the development of enzyme inhibitors, both as mechanistic probes and increasingly as therapeutic agents. We are on the cusp of a new era where we are learning how to dovetail powerful computational techniques with structural and kinetic data to provide an unprecedented view of conformational details of enzyme action.

The three-dimensional structure of the cellobiohydrolase Cel7A from Aspergillus fumigatus at 1.5 Å resolution

The enzymatic degradation of plant cell-wall cellulose is central to many industrial processes, including second-generation biofuel production. Key players in this deconstruction are the fungal cellobiohydrolases (CBHs), notably those from family GH7 of the carbohydrate-active enzymes (CAZY) database, which are generally known as CBHI enzymes. Here, three-dimensional structures are reported of the Aspergillus fumigatus CBHI Cel7A solved in uncomplexed and disaccharide-bound forms at resolutions of 1.8 and 1.5 Å, respectively. The product complex with a disaccharide in the +1 and +2 subsites adds to the growing three-dimensional insight into this family of industrially relevant biocatalysts.

Processive pectin methylesterases: the role of electrostatic potential, breathing motions and bond cleavage in the rectification of Brownian motions

Pectin methylesterases (PMEs) hydrolyze the methylester groups that are found on the homogalacturonan (HG) chains of pectic polysaccharides in the plant cell wall. Plant and bacterial PMEs are especially interesting as the resulting de-methylesterified (carboxylated) sugar residues are found to be arranged contiguously, indicating a so-called processive nature of these enzymes. Here we report the results of continuum electrostatics calculations performed along the molecular dynamics trajectory of a PME-HG-decasaccharide complex. In particular it was observed that, when the methylester groups of the decasaccharide were arranged in order to mimic the just-formed carboxylate product of de-methylesterification, a net unidirectional sliding of the model decasaccharide was subsequently observed along the enzyme’s binding groove. The changes that occurred in the electrostatic binding energy and protein dynamics during this translocation provide insights into the mechanism by which the enzyme rectifies Brownian motions to achieve processivity. The free energy that drives these molecular motors is thus demonstrated to be incorporated endogenously in the methylesterified groups of the HG chains and is not supplied exogenously.

Glycosyl rotation and distortion by key residues in Endocellulase Cel6A from Theromobifida fusca

Endocellulases are one kind of the important biodegrading cellulose enzymes. Experimental results show that a rotated and distorted preactivated structure exists before the substrate entering the transition state. The molecular dynamic simulation of endocellulase Cel6A models revealed a correlation between the rotation and distortion of pyranoside ring in -1 glycosyl unit of the substrate. The two key residues, Tyr73 and Ser189, in Cal6A cooperate to rotate and distort the pyranoside ring in the cellulose hydrolysis.

Product binding varies dramatically between processive and nonprocessive cellulase enzymes

Cellulases hydrolyze β-1,4 glycosidic linkages in cellulose, which are among the most prevalent and stable bonds in Nature. Cellulases comprise many glycoside hydrolase families and exist as processive or nonprocessive enzymes. Product inhibition negatively impacts cellulase action, but experimental measurements of product-binding constants vary significantly, and there is little consensus on the importance of this phenomenon. To provide molecular level insights into cellulase product inhibition, we examine the impact of product binding on processive and nonprocessive cellulases by calculating the binding free energy of cellobiose to the product sites of catalytic domains of processive and nonprocessive enzymes from glycoside hydrolase families 6 and 7. The results suggest that cellobiose binds to processive cellulases much more strongly than nonprocessive cellulases. We also predict that the presence of a cellodextrin bound in the reactant site of the catalytic domain, which is present during enzymatic catalysis, has no effect on product binding in nonprocessive cellulases, whereas it significantly increases product binding to processive cellulases. This difference in product binding correlates with hydrogen bonding between the substrate-side ligand and the cellobiose product in processive cellulase tunnels and the additional stabilization from the longer tunnel-forming loops. The hydrogen bonds between the substrate- and product-side ligands are disrupted by water in nonprocessive cellulase clefts, and the lack of long tunnel-forming loops results in lower affinity of the product ligand. These findings provide new insights into the large discrepancies reported for binding constants for cellulases and suggest that product inhibition will vary significantly based on the amount of productive binding for processive cellulases on cellulose.

Two structurally discrete GH7-cellobiohydrolases compete for the same cellulosic substrate fiber

BACKGROUND

Cellulose consisting of arrays of linear beta-1,4 linked glucans, is the most abundant carbon-containing polymer present in biomass. Recalcitrance of crystalline cellulose towards enzymatic degradation is widely reported and is the result of intra- and inter-molecular hydrogen bonds within and among the linear glucans. Cellobiohydrolases are enzymes that attack crystalline cellulose. Here we report on two forms of glycosyl hydrolase family 7 cellobiohydrolases common to all Aspergillii that attack Avicel, cotton cellulose and other forms of crystalline cellulose.

RESULTS

Cellobiohydrolases Cbh1 and CelD have similar catalytic domains but only Cbh1 contains a carbohydrate-binding domain (CBD) that binds to cellulose. Structural superpositioning of Cbh1 and CelD on the Talaromyces emersonii Cel7A 3-dimensional structure, identifies the typical tunnel-like catalytic active site while Cbh1 shows an additional loop that partially obstructs the substrate-fitting channel. CelD does not have a CBD and shows a four amino acid residue deletion on the tunnel-obstructing loop providing a continuous opening in the absence of a CBD. Cbh1 and CelD are catalytically functional and while specific activity against Avicel is 7.7 and 0.5 U.mg prot-1, respectively specific activity on pNPC is virtually identical. Cbh1 is slightly more stable to thermal inactivation compared to CelD and is much less sensitive to glucose inhibition suggesting that an open tunnel configuration, or absence of a CBD, alters the way the catalytic domain interacts with the substrate. Cbh1 and CelD enzyme mixtures on crystalline cellulosic substrates show a strong combinatorial effort response for mixtures where Cbh1 is present in 2:1 or 4:1 molar excess. When CelD was overrepresented the combinatorial effort could only be partially overcome. CelD appears to bind and hydrolyze only loose cellulosic chains while Cbh1 is capable of opening new cellulosic substrate molecules away from the cellulosic fiber.

CONCLUSION

Cellobiohydrolases both with and without a CBD occur in most fungal genomes where both enzymes are secreted, and likely participate in cellulose degradation. The fact that only Cbh1 binds to the substrate and in combination with CelD exhibits strong synergy only when Cbh1 is present in excess, suggests that Cbh1 unties enough chains from cellulose fibers, thus enabling processive access of CelD.

Comparison of the structural changes in two cellobiohydrolases, CcCel6A and CcCel6C, from Coprinopsis cinerea--a tweezer-like motion in the structure of CcCel6C

The basidiomycete Coprinopsis cinerea produces five cellobiohydrolases belonging to glycoside hydrolase family 6 (GH6). Among these enzymes, C. cinerea cellulase 6C (CcCel6C), but not C. cinerea cellulase 6A (CcCel6A), can efficiently hydrolyze carboxymethyl cellulose and is constitutively expressed in C. cinerea. In contrast, CcCel6A possesses a cellulose-binding domain, and is strongly induced by cellobiose. Here, we determined the crystal structures of the CcCel6A catalytic domain complexed with a Hepes buffer molecule, with cellobiose, and with p-nitrophenyl β-D-cellotrioside (pNPG3). A notable feature of the GH6 cellobiohydrolases is that the active site is enclosed by two loops to form a tunnel, and the loops have been demonstrated to open and close in response to ligand binding. The enclosed tunnel of CcCel6A-Hepes is seen as the open form, whereas the tunnels of CcCel6A-cellobiose and CcCel6A-pNPG3 adopt the closed form. pNPG3 was not hydrolyzed by CcCel6A, and bound in subsites +1 to +4. On the basis of this observation, we constructed two mutants, CcCel6A D164A and CcCel6C D102A. Neither CcCel6A D164A nor CcCel6C D102A hydrolyze phosphoric acid-swollen cellulose. We have previously determined the crystal structures of CcCel6C unbound and in complex with ligand, both of which adopt the open form. In the present study, both CcCel6A and CcCel6C mutants were identified as the closed form. However, the motion angle of CcCel6C was more than 10-fold greater than that of CcCel6A. The width of the active site cleft of CcCel6C was narrowed, owing to a tweezer-like motion.

A salt-bridge controlled by ligand binding modulates the hydrolysis reaction in a GH5 endoglucanase

Cellulases, distributed in at least 15 families of glycoside hydrolases, will play a key role in biomass conversion and renewable energy challenges of the future. Cel5B from Clostridium thermocellum is a β-1,4-endoglucanase and a member of family 5 of glycoside hydrolases (GH5) and is characterized by an (α/β)(8) barrel structure. In contrast to other retaining enzymes, in which the catalytic carboxylate groups (glutamate or aspartate) are positioned ≈ 5.5 Å apart to facilitate nucleophilic attack on the anomeric carbon of the sugar substrate, these two residues in Cel5B are positioned ≈ 10 Å from each other in the unliganded wild-type structure. The structure of the enzyme solved in complex with a cleavage product (cellobiose) revealed ligand-induced conformational changes in the loop carrying Glu140 (proton donor). The reorientation of Glu140 in the complex reduces the separation of the catalytic glutamate residues to 4.3 Å. In this study, we took advantage of conventional and steered molecular dynamics (MD) simulations along with in silico and in vitro mutagenesis to investigate the ligand-induced changes of the enzyme and interactions involved in preservation of Cel5B conformations in the presence and absence of substrate. We determined that the variation in separation of catalytic glutamates in the absence and presence of substrate is due to the different protonation states of the proton donor glutamate that is largely governed by conformational changes in the β3α3 loop. In the absence of substrate, the conformation of Cel5B is preserved by an electrostatic interaction between deprotonated Glu140 and protonated His91. The ion pair is interrupted upon the binding of substrate, and the positional displacement of the β3α3 loop allows Glu140 to become oriented within the active site in a less hydrophilic microenvironment that assists in Glu140 protonation.

Directed evolution and structural prediction of cellobiohydrolase II from the thermophilic fungus Chaetomium thermophilum

Cellulases can be engineered with enhanced properties for broad use in scientific and industrial applications. In this study, the wild-type cbh2 gene of the thermophilic fungus Chaetomium thermophilum encoding cellobiohydrolase II (CBHII) was mutagenized through in vitro directed evolution. The resulting Pichia pastoris yeast library was screened, and two transformants were selected for enhanced CBHII activities that were not attributed to increased gene copy numbers. The optimum fermentation times of the two mutant transformants were shortened to 4-5 days after methanol induction compared to 6 days for the wild-type. The optimum reaction temperature (60 °C) and pH level (5 or 6) of the mutant CBHII proteins, designated CBHIIX16 and CBHIIX305, were higher than those of wild-type CBHII (50 °C and pH 4). Kept at 80 °C for 1 h, CBHIIX16 and CBHIIX305 retained >50% of their activities, while the wild-type CBHII lost all activity. Sequence analysis of CBHIIX16 and CBHIIX305 revealed that they contained five and six mutated amino acids, respectively. Structural modeling confirmed the presence of carbohydrate binding type-1 and catalytic domains, where the hydrogen bond numbers between the 227th and 203rd amino acids were increased, which perhaps contributed to the elevated enzyme stability. Therefore, the two CBHII mutants selected for increased enzymatic activities also demonstrated elevated optimum reaction temperature and pH levels and enhanced thermal stability. These properties may be beneficial in practical applications for CBHII.

Processivity of cellobiohydrolases is limited by the substrate

Processive cellobiohydrolases (CBHs) are the key components of fungal cellulase systems. Despite the wealth of structural data confirming the processive mode of action, little quantitative information on the processivity of CBHs is available. Here, we developed a method for measuring cellulase processivity. Sensitive fluorescence detection of enzyme-generated insoluble reducing groups on cellulose after labeling with diaminopyridine enabled quantification of the number of reducing-end exo-mode and endo-mode initiations. Both CBHs TrCel7A from Trichoderma reesei and PcCel7D from Phanerochaete chrysosporium employed reducing-end exo- and endo-mode initiation in parallel. Processivity values measured for TrCel7A and PcCel7D on cellulose hydrolysis were more than an order of magnitude lower than the values of intrinsic processivity that were found from the ratio of catalytic constant (k(cat)) and dissociation rate constant (k(off)). We propose that the length of the obstacle-free path available for a processive run on cellulose chain limits the processivity of CBHs on cellulose. TrCel7A and PcCel7D differed in their k(off) values, whereas the k(cat) values were similar. Furthermore, the k(off) values for endoglucanases (EGs) were much higher than the k(off) values for CBHs, whereas the k(cat) values for EGs and CBHs were within the same order of magnitude. These results suggest that the value of k(off) may be the primary target for the selection of cellulases.

Cellulosomes: highly efficient nanomachines designed to deconstruct plant cell wall complex carbohydrates

Cellulosomes can be described as one of nature's most elaborate and highly efficient nanomachines. These cell bound multienzyme complexes orchestrate the deconstruction of cellulose and hemicellulose, two of the most abundant polymers on Earth, and thus play a major role in carbon turnover. Integration of cellulosomal components occurs via highly ordered protein:protein interactions between cohesins and dockerins, whose specificity allows the incorporation of cellulases and hemicellulases onto a molecular scaffold. Cellulosome assembly promotes the exploitation of enzyme synergism because of spatial proximity and enzyme-substrate targeting. Recent structural and functional studies have revealed how cohesin-dockerin interactions mediate both cellulosome assembly and cell-surface attachment, while retaining the spatial flexibility required to optimize the catalytic synergy within the enzyme complex. These emerging advances in our knowledge of cellulosome function are reviewed here.

Processivity, synergism, and substrate specificity of Thermobifida fusca Cel6B

A relationship between processivity and synergism has not been reported for cellulases, although both characteristics are very important for hydrolysis of insoluble substrates. Mutation of two residues located in the active site tunnel of Thermobifida fusca exocellulase Cel6B increased processivity on filter paper. Surprisingly, mixtures of the Cel6B mutant enzymes and T. fusca endocellulase Cel5A did not show increased synergism or processivity, and the mutant enzyme which had the highest processivity gave the poorest synergism. This study suggests that improving exocellulase processivity might be not an effective strategy for producing improved cellulase mixtures for biomass conversion. The inverse relationship between the activities of many of the mutant enzymes with bacterial microcrystalline cellulose and their activities with carboxymethyl cellulose indicated that there are differences in the mechanisms of hydrolysis for these substrates, supporting the possibility of engineering Cel6B to target selected substrates.

Heterologous expression, crystallization and preliminary X-ray characterization of CcCel6C, a glycoside hydrolase family 6 enzyme from the basidiomycete Coprinopsis cinerea

CcCel6C is a gene that encodes a glycoside hydrolase family 6 (GH6) enzyme in the Coprinopsis cinerea genome. In the evolutionary tree of GH6 enzymes, the encoded enzyme was closely related to Cel6B from Humicola insolens, previously called endoglucanase VI, while its amino-acid sequence revealed a region corresponding to the C-terminal active-site-enclosing loop typical of cellobiohydrolase II. Here, the crystallization of CcCel6C produced in Escherichia coli is reported. The square prismatic crystal belonged to the triclinic space group P1, with unit-cell parameters a = 44.04, b = 45.11, c = 48.90 A, alpha = 77.81, beta = 87.34, gamma = 68.79 degrees. Diffraction data were collected to 1.6 A resolution.

Automated docking to explore subsite binding by glycoside hydrolase family 6 cellobiohydrolases and endoglucanases

Cellooligosaccharides were computationally docked using AutoDock into the active sites of the glycoside hydrolase Family 6 enzymes Hypocrea jecorina (formerly Trichoderma reesei) cellobiohydrolase and Thermobifida fusca endoglucanase. Subsite -2 exerts the greatest intermolecular energy in binding beta-glucosyl residues, with energies progressively decreasing to either side. Cumulative forces imparting processivity exerted by these two enzymes are significantly less than by the equivalent glycoside hydrolase Family 7 enzymes studied previously. Putative subsites -4, -3, +3, and +4 exist in H. jecorina cellobiohydrolase, along with putative subsites -4, -3, and +3 in T. fusca endoglucanase, but they are less important than subsites -2, -1, +1, and +2. In general, binding adds 3-7 kcal/mol to ligand intramolecular energies because of twisting of scissile glycosidic bonds. Distortion of beta-glucosyl residues to the (2)S(O) conformation by binding in subsite -1 adds approximately 7 kcal/mol to substrate intramolecular energies.

The Structural Basis for Exopolygalacturonase Activity in a Family 28 Glycoside Hydrolase

Family 28 glycoside hydrolases (polygalacturonases) are found in organisms across the plant, fungal and bacterial kingdoms, where they are central to diverse biological functions such as fruit ripening, biomass recycling and plant pathogenesis. The structures of several polygalacturonases have been reported; however, all of these enzymes utilize an endo-mode of digestion, which generates a spectrum of oligosaccharide products with varying degrees of polymerization. The structure of a complementary exo-acting polygalacturonase and an accompanying explanation of the molecular determinants for its specialized activity have been noticeably lacking. We present the structure of an exopolygalacturonase from Yersinia enterocolitica, YeGH28 in a native form (solved to 2.19 A resolution) and a digalacturonic acid product complex (solved to 2.10 A resolution). The activity of YeGH28 is due to inserted stretches of amino acid residues that transform the active site from the open-ended channel observed in the endopolygalacturonases to a closed pocket that restricts the enzyme to the exclusive attack of the non-reducing end of oligogalacturonide substrates. In addition, YeGH28 possesses a fused FN3 domain with unknown function, the first such structure described in pectin active enzymes.

Phylogenetic analysis of family 6 glycoside hydrolases

Multiple sequence alignment separates members of glycoside hydrolase Family 6 into eight subfamilies: one of mainly actinobacterial endoglucanases (EGs), one of ascomycotal EGs, one of chytridiomycotal EGs and cellobiohydrolases (CBHs), one of actinobacterial and proteobacterial CBHs, one of chytridiomycotal CBHs, two of ascomycotal CBHs, and one of basidiomycotal CBHs. Each also has some proteins of unknown function. Multiple sequence alignment also extends to all of Family 6 the observation that lengths of loops that form the active-site tunnel in CBHs vary among subfamilies, and along with loop conformations, determine enzyme function.

Two conserved histidine residues are critical to the function of the TagF-like family of enzymes

The TagF protein from Bacillus subtilis 168 is the poly(glycerol phosphate) polymerase responsible for the synthesis of wall teichoic acid and is the prototype member of a poorly understood family of similar teichoic acid synthetic enzymes. Here we describe in vitro and in vivo characterization of TagF, which localizes the active site to the carboxyl terminus of the protein and identifies residues that are critical for catalysis. We also establish the first mechanistic link among TagF and similar proteins by demonstrating that the identified residues are also critical in the function of TagB, a homologous enzyme implicated as the glycerophosphotransferase responsible for priming poly(glycerol phosphate) synthesis. We investigated the dependence of TagF activity on pH and showed that deprotonation of a residue with a pK(a) near neutral is critical for proper function. Alteration of histidine residues 474 and 612 by site-directed mutagenesis abolished TagF activity in vitro (5000-fold reduction in k(cat)/K(m)) while variants in four other conserved acidic residues showed minimal loss of activity. Complementation using H474A and H612A mutant alleles failed to suppress a lethal temperature-sensitive tagF defect in vivo despite confirmation of robust expression by Western blot. When corresponding mutations were made to the homologous tagB gene, these alleles were unable to suppress a tagB temperature-sensitive lethal phenotype. These results extend the mechanistic observations for TagF across a wider family of enzymes and provide the first biochemical evidence for the relatedness of these two enzymes.

Mycobacterium tuberculosis Strains Possess Functional Cellulases

The genomes of various Mycobacterium tuberculosis strains encode proteins that do not appear to play a role in the growth or survival of the bacterium in its mammalian host, including some implicated in plant cell wall breakdown. Here we show that M. tuberculosis H37Rv does indeed possess a functional cellulase. The x-ray crystal structure of this enzyme, in ligand complex forms, from 1.9 to 1.1A resolution, reveals a highly conserved substrate-binding cleft, which affords similar, and unusual, distortion of the substrate at the catalytic center. The endoglucanase activity, together with the existence of a putative membrane-associated crystalline polysaccharide-binding protein, may reflect the ancestral soil origin of the Mycobacterium or hint at a previously unconsidered environmental niche.

Crystal Structure of Thermotoga maritima α-l-Fucosidase

Fucosylated glycoconjugates are involved in numerous biological events, and alpha-l-fucosidases, the enzymes responsible for their processing, are therefore of crucial importance. Deficiency in alpha-l-fucosidase activity is associated with fucosidosis, a lysosomal storage disorder characterized by rapid neurodegeneration, resulting in severe mental and motor deterioration. To gain insight into alpha-l-fucosidase function at the molecular level, we have determined the crystal structure of Thermotoga maritima alpha-l-fucosidase. This enzyme assembles as a hexamer and displays a two-domain fold, composed of a catalytic (beta/alpha)(8)-like domain and a C-terminal beta-sandwich domain. The structures of an enzyme-product complex and of a covalent glycosyl-enzyme intermediate, coupled with kinetic and mutagenesis studies, allowed us to identify the catalytic nucleophile, Asp(244), and the Brønsted acid/base, Glu(266). Because T. maritima alpha-l-fucosidase occupies a unique evolutionary position, being far more closely related to the mammalian enzymes than to any other prokaryotic homolog, a structural model of the human enzyme was built to document the structural consequences of the genetic mutations associated with fucosidosis.

The Structural Bases of the Processive Degradation of ι-Carrageenan, a Main Cell Wall Polysaccharide of Red Algae

iota-Carrageenans are sulfated 1,3-alpha-1,4-beta-galactans from the cell walls of red algae, which auto-associate into crystalline fibers made of aggregates of double-stranded helices. iota-Carrageenases, which constitute family 82 of glycoside hydrolases, fold into a right-handed beta-helix. Here, the structure of Alteromonas fortis iota-carrageenase bound to iota-carrageenan fragments was solved at 2.0A resolution (PDB 1KTW). The enzyme holds a iota-carrageenan tetrasaccharide (subsites +1 to +4) and a disaccharide (subsites -3, -4), thus providing the first direct determination of a 3D structure of iota-carrageenan. Electrostatic interactions between basic protein residues and the sulfate substituents of the polysaccharide chain dominate iota-carrageenan recognition. Glu245 and Asp247 are the proton donor and the base catalyst, respectively. C-terminal domain A, which was highly flexible in the native enzyme structure, adopts a alpha/beta-fold, also found in DNA/RNA-binding domains. In the substrate-enzyme complex, this polyanion-binding module shifts toward the beta-helix groove, forming a tunnel. Thus, from an open conformation which allows for the initial endo-attack of iota-carrageenan chains, the enzyme switches to a closed-tunnel form, consistent with its highly processive character, as seen from the electron-microscopy analysis of the degradation of iota-carrageenan fibers.

Crystal structures of Geobacillus stearothermophilus alpha-glucuronidase complexed with its substrate and products: mechanistic implications

Alpha-glucuronidases cleave the alpha-1,2-glycosidic bond between 4-O-methyl-d-glucuronic acid and short xylooligomers as part of the hemicellulose degradation system. To date, all of the alpha-glucuronidases are classified as family 67 glycosidases, which catalyze the hydrolysis via the investing mechanism. Here we describe several high resolution crystal structures of the alpha-glucuronidase (AguA) from Geobacillus stearothermophilus, in complex with its substrate and products. In the complex of AguA with the intact substrate, the 4-O-methyl-d-glucuronic acid sugar ring is distorted into a half-chair conformation, which is closer to the planar conformation required for the oxocarbenium ion-like transition state structure. In the active site, a water molecule is coordinated between two carboxylic acids, in an appropriate position to act as a nucleophile. From the structural data it is likely that two carboxylic acids, Asp(364) and Glu(392), activate together the nucleophilic water molecule. The loop carrying the catalytic general acid Glu(285) cannot be resolved in some of the structures but could be visualized in its "open" and "closed" (catalytic) conformations in other structures. The protonated state of Glu(285) is presumably stabilized by its proximity to the negative charge of the substrate, representing a new variation of substrate-assisted catalysis mechanism.

Engineering the Exo-loop of Trichoderma reesei Cellobiohydrolase, Cel7A. A comparison with Phanerochaete chrysosporium Cel7D

The exo-loop of Trichoderma reesei cellobiohydrolase Cel7A forms the roof of the active site tunnel at the catalytic centre. Mutants were designed to study the role of this loop in crystalline cellulose degradation. A hydrogen bond to substrate made by a tyrosine at the tip of the loop was removed by the Y247F mutation. The mobility of the loop was reduced by introducing a new disulphide bridge in the mutant D241C/D249C. The tip of the loop was deleted in mutant Delta(G245-Y252). No major structural disturbances were observed in the mutant enzymes, nor was the thermostability of the enzyme affected by the mutations. The Y247F mutation caused a slight k(cat) reduction on 4-nitrophenyl lactoside, but only a small effect on cellulose hydrolysis. Deletion of the tip of the loop increased both k(cat) and K(M) and gave reduced product inhibition. Increased activity was observed on amorphous cellulose, while only half the original activity remained on crystalline cellulose. Stabilisation of the exo-loop by the disulphide bridge enhanced the activity on both amorphous and crystalline cellulose. The ratio Glc(2)/(Glc(3)+Glc(1)) released from cellulose, which is indicative of processive action, was highest with Tr Cel7A wild-type enzyme and smallest with the deletion mutant on both substrates. Based on these data it seems that the exo-loop of Tr Cel7A has evolved to facilitate processive crystalline cellulose degradation, which does not require significant conformational changes of this loop.

Cel6A, a major exoglucanase from the cellulosome of the anaerobic fungi Piromyces sp. E2 and Piromyces equi

Anaerobic fungi possess high cellulolytic activities, which are organised in high molecular mass (HMM) complexes. Besides catalytic modules, the cellulolytic enzyme components of these complexes contain non-catalytic modules, known as dockerins, that play a key role in complex assembly. Screening of a genomic and a cDNA library of two Piromyces species resulted in the isolation of two clones containing inserts of 5.5 kb (Piromyces sp. E2) and 1.5 kb (Piromyces equi). Both clones contained the complete coding region of a glycoside hydrolase (GH) from family 6, consisting of a 20 amino acid signal peptide, a 76 (sp. E2)/81 (P. equi) amino acid stretch comprising two fungal non-catalytic docking domains (NCDDs), a 24 (sp. E2)/16 (P. equi) amino acid linker, and a 369 amino acid catalytic module. Homology modelling of the catalytic module strongly suggests that the Piromyces enzymes will be processive cellobiohydrolases. The catalytic residues and all nearby residues are conserved. The reaction is thus expected to proceed via a classical single-displacement (inverting) mechanism that is characteristic of this family of GHs. The enzyme, defined as Cel6A, encoded by the full-length Piromyces E2 sequence was expressed in Escherichia coli. The recombinant protein expressed had a molecular mass of 55 kDa and showed activity against Avicel, supporting the observed relationship of the sequence to those of known cellobiohydrolases. Affinity-purified cellulosomes of Piromyces sp. E2 were analysed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and sodium dodecyl sulfate-polyacrylamide gel (SDS-PAGE) electrophoresis. A major band was detected with the molecular weight of Cel6A. A tryptic fingerprint of this protein confirmed its identity.

Structural basis for ligand binding and processivity in cellobiohydrolase Cel6A from Humicola insolens

The enzymatic digestion of cellulose entails intimate involvement of cellobiohydrolases, whose characteristic active-center tunnel contributes to a processive degradation of the polysaccharide. The cellobiohydrolase Cel6A displays an active site within a tunnel formed by two extended loops, which are known to open and close in response to ligand binding. Here we present five structures of wild-type and mutant forms of Cel6A from Humicola insolens in complex with nonhydrolyzable thio-oligosaccharides, at resolutions from 1.7-1.1 A, dissecting the structural accommodation of a processing substrate chain through the active center during hydrolysis. Movement of ligand is facilitated by extensive solvent-mediated interactions and through flexibility in the hydrophobic surfaces provided by a sheath of tryptophan residues.