Aqueous gel formation of a synthetic peptide derived from the beta-sheet domain of platelet factor-4

Domain swapping in materials design

Peptide self-assembly can be used as a bottom-up approach to material fabrication. Although many different types of materials can be prepared from peptides, hydrogels are perhaps one of the most common. Gels typically result from the self-assembly of peptides into fibrillar networks. Controlling the structural morphology of these fibrils and the networks they form allows direct control over a given material's bulk properties. However, exerting this control is extremely difficult as the mechanistic rules that govern peptide self-assembly are far from being established. Conversely, several amyloidogenic proteins have been shown to self-assemble into fibrils using a mechanism known as domain swapping. Here, discrete units of secondary structure or even whole domains are exchanged (swapped) among discrete proteins during self-assembly to form extended networks with precise structural control. This review discusses several common mechanistic variations of domain swapping using naturally occurring proteins as examples. The possibility of using these principles to design peptides capable of controlled assembly and fibril formation leading to materials with targeted properties is explored.

Additional supra-self-assembly of human serum albumin under amyloid-like-forming solution conditions

Protein aggregation has a multitude of consequences ranging from affecting protein expression to its implication in different diseases. Of recent interest is the specific form of aggregation leading to the formation of amyloid fibrils, structures associated with diseases such as Alzheimer's disease. These fibrils can further associate in other more complex structures such as fibrillar gels, plaques, or spherulitic structures. In the present work, we describe the physical and structural properties of additional supraself-assembled structures of human serum albumin under solution conditions in which amyloid-like fibrils are formed. We have detected the formation of ordered aggregates of amyloid fibrils, i.e., spherulites which possess a radial arrangement of the fibrils around a disorganized protein core and sizes of several micrometers by means of polarized optical microscopy, laser confocal microscopy, and transmission electron microscopy. These spherulites are detected both in solution and embedded in an isotropic matrix of fibrillar gels. In this regard, we have also noted the formation of protein gels when the protein concentration and/or ionic strength exceds a threshold value (the gelation point) as observed by rheometry. Fibrillar gels are formed through intermolecular nonspecific association of amyloid fibrils at a pH far away from the isolectric point of the protein where protein molecules seem to display a "solid-like" behavior due to the existence of non-DLVO (Derjaguin-Landau-Verwey-Overbeck) intermolecular repulsive forces. As the solution ionic strength increases, a coarsening of this type of gel is observed by environmental scanning microscopy. In contrast, at pH close to the protein isoelectric point, particulate gels are formed due to a faster aggregation process, which does not allow substantial structural reorganization to enable the formation of ordered structures. This behavior also additionally corroborates that the existence of particulates might also be a generic property of all polypeptide chains as amyloid fibril formation under suitable conditions.

Folding, self-assembly, and bulk material properties of a de novo designed three-stranded beta-sheet hydrogel

A de novo designed three-stranded beta-sheet (TSS1) has been prepared that undergoes temperature-induced folding and self-assembly to afford a network of beta-sheet rich fibrils that constitutes a mechanically rigid hydrogel. Circular dichroism and infrared spectroscopies show that TSS1 folds and self-assembles into a beta-sheet secondary structure in response to temperature. Rheological measurements show that the resulting hydrogels are mechanically rigid [at pH 9, G' = 1750-9000 Pa, and at pH 7.4, G' = 8500 Pa] and that the storage modulus can be modulated by temperature and peptide concentration. Nanoscale structure analysis by transmission electron microscopy and small angle neutron scattering indicate that the hydrogel network is comprised of fibrils that are about 3 nm in width, consistent with the width of TSS1 in the folded state. A unique property of the TSS1 hydrogel is its ability to shear-thin into a low viscosity gel upon application of shear stress and immediately recover its mechanical rigidity upon termination of stress. This attribute allows the hydrogel to be delivered via syringe to a target site with spatial and temporal resolution. Finally, experiments employing C3H10t1/2 mesenchymal stem cells seeded onto the hydrogel and incubated for 24 h indicate that the TSS1 hydrogel surface is noncytotoxic, supports cell adhesion, and allows cell migration.

Nanoimaging in protein-misfolding and -conformational diseases

Protein misfolding and the subsequent assembly of protein molecules into aggregates of various morphologies represent common mechanisms that link a number of important human diseases, known as protein-misfolding diseases. The current list of these disorders includes (but is not limited to) numerous neurodegenerative diseases, cataracts, arthritis, medullary carcinoma of the thyroid, late-onset diabetes mellitus, symptomatic (hemodialysis-related) beta(2)-microglobulin amyloidosis, arthritis and many other systemic, localized and familial amyloidoses. Progress in understanding protein-misfolding pathologies and in potential rational drug design aimed at the inhibition or reversal of protein aggregation depends on our ability to study the details of the misfolding process, to follow the aggregation process and to see and analyze the structure and mechanical properties of the aggregated particles. Nanoimaging provides a method to monitor the aggregation process, visualize protein aggregates and analyze their properties and provides fundamental knowledge of key factors that lead to protein misfolding and self-assembly in various protein-misfolding pathologies, therefore advancing medicine dramatically.

Structural properties of an artificial protein that regulates the nucleation of inorganic and organic crystals

Technological advances have facilitated the generation of artificial proteins that possess the capabilities of recognizing and binding to inorganic solids and/or controlling nucleation processes that form inorganic solids. However, very little is known regarding the structure of these interesting polypeptides and how their structure contributes to functionality. To address this deficiency, we report structural investigations of an artificial protein, p288, that self-assembles and controls the nucleation of simple salts and organic compounds into dendrite-like crystals. Under aqueous conditions at low pH and in the presence of high salt, p288 is conformationally labile and exists primarily as a random coil conformer in equilibrium with other undefined secondary structures, including polyproline type II and beta turn. We note that p288 can fold into either a partial beta strand (at neutral pH) or a predominantly alpha helical (in the presence of TFE) conformation. Solid-state 13C-15N NMR experiments also reveal that p288 in the lyophilized, hydrated state possesses some degree of nonrandom coil structure. These results indicate that p288 is conformationally labile but can undergo conformational transitions to a more stable structure when water solvent loss/displacement occurs and protein concentrations increase. We believe that conformational instability and the ability to adopt different structures as a function of different environmental conditions represent important molecular features that impact p288 supramolecular assembly and crystal nucleation processes.

Optical microscopy of growing insulin amyloid spherulites on surfaces in vitro

Amyloid fibrils are often found arranged into large ordered spheroid structures, known as spherulites, occurring in vivo and in vitro. The spherulites are predominantly composed of radially ordered amyloid fibrils, which self-assemble from protein in solution. We have observed and measured amyloid spherulites forming from heat-treated solutions of bovine insulin at low pH. The spherulites form in large numbers as semispherical dome-shaped objects on the cell surfaces, showing that surface defects or impurities, or the substrates themselves, can provide good nucleation sites for their formation. Using optical microscopy, we have measured the growth of individual spherulites as a function of time and in various conditions. There is a lag time before nucleation of the spherulites. Once they have nucleated, they grow, each with a radius increasing linearly, or faster than linearly, with time. Remarkably, this growth period has a sudden end, at which all spherulites in the system suddenly stop growing. A model of spherulite formation based on the polymerization of oriented fibrils around a nucleus, from a precursor in solution, quantitatively accounts for the observed growth kinetics. Seeding of native insulin solutions with preformed spherulites led to the preformed spherulites growing without a lag time. This seeding behavior is evidence that the fibrils in the spherulites assemble from small protein species rather than fibrils. The density of the spherulites was also measured and found to be constant with respect to radius, indicating that the space fills as the spherulite grows.

The binding of thioflavin-T to amyloid fibrils: localisation and implications

Amyloid fibrils are a polymeric form of protein, involving a continuous beta-sheet with the strands perpendicular to the long axis of the fibril. Although typically implicated in diseases such as Alzheimer's disease and the transmissible spongiform encephalopathies, non disease-associated protein can also be converted into amyloid fibrils. Traditionally, amyloid fibrils are identified via the use of specific dyes such as Congo red and thioflavin-T, although their specificity is ill understood. Recently, solutions of bovine insulin and bovine beta-lactoglobulin have been found to form spherulites, micron-sized spherical structures containing radially arranged amyloid fibrils. When studied by confocal microscopy using polarised laser light and thioflavin-T, a consistent pattern of emission, rather than a uniform disc, was observed. This suggests the dye binds in a specific, regular fashion to amyloid fibrils. Confocal microscopy studies of thioflavin-T aligned in stretched poly-vinyl alcohol films showed that the dye dipole excitation axis lies parallel to the long molecular axis. Therefore, thioflavin-T binds to amyloid fibrils such that their long axes are parallel. We propose binding occurs in 'channels' that run along the length of the beta-sheet. Steric interactions between dye molecules and side chains indicate why thioflavin-T fluoresces more intensely when bound to amyloid fibrils and can explain why this interaction with amyloid fibrils is specific, but with varying efficiency.

The mechanism of amyloid spherulite formation by bovine insulin

The formation of amyloid-containing spherulite-like structures has been observed in some instances of amyloid diseases, as well as in amyloid fibril-containing solutions in vitro. In this article we describe the structure and kinetics of bovine insulin amyloid fibril spherulites formed in the presence and absence of different salts and at different salt concentrations. The general spherulite structure consists of radially oriented amyloid fibrils, as shown by optical microscopy and environmental scanning electron microscopy. In the center of each spherulite, a "core" of less regularly oriented material is observed, whose size decreases when the spherulites are formed in the presence of increasing concentrations of NaCl. Similarly, amyloid fibrils form faster in the presence of NaCl than in its absence. A smaller enhancement of the rate of formation with salt concentration is observed for spherulites. These data suggest that both amyloid fibril formation and random aggregation occur concurrently under the conditions tested. Changes in their relative rates result in the different-sized cores observed in the spherulites. This mechanism can be likened to that leading to the formation of spherulites of polyethylene, in agreement with observations that polypeptide chains under partially denaturing conditions can exhibit behavior not dissimilar to that of synthetic polymers.

The formation of spherulites by amyloid fibrils of bovine insulin

Bovine insulin has long been known to self-assemble in vitro into amyloid fibrils. We have observed a further higher-order self-association of the protein into spherical structures, with diameters typically around 50 microm but ranging from 10 to 150 microm. In a polarizing light microscope, these structures exhibit a "Maltese-cross" extinction pattern typical of spherulites. Spherical structures of a similar size distribution can be observed in the environmental scanning electron microscope, which also reveals the presence of significant amounts of water in the structures. The spherulites contain a large quantity of well defined amyloid fibrils, suggesting that they are formed at least in part as a consequence of the self-assembly of preformed fibrils. Similar structures also have been observed in the tissues of patients suffering from amyloid disorders. The ability of amyloid fibrils to form such higher-order assemblies supports the hypothesis that they represent a generic form of polypeptide structure with properties that are analogous to those of classical synthetic polymers.

Conformational constraints for amyloid fibrillation: the importance of being unfolded

Recent reports give strong support to the idea that amyloid fibril formation and the subsequent development of protein deposition diseases originate from conformational changes in corresponding amyloidogenic proteins. In this review, recent findings are surveyed to illustrate that protein fibrillogenesis requires a partially folded conformation. This amyloidogenic conformation is relatively unfolded, and shares many structural properties with the pre-molten globule state, a partially folded intermediate frequently observed in the early stages of protein folding and under some equilibrium conditions. The inherent flexibility of such an intermediate is essential in allowing the conformational rearrangements necessary to form the core cross-beta structure of the amyloid fibril.

Comparative vibrational spectroscopy of intracellular tau and extracellular collagen I reveals parallels of gelation and fibrillar structure

The N-terminal tau 2-19 peptide undergoes gelation, syneresis, and aggregation over a period of years. These changes may be approximated on a shorter time scale by agitation and partial dehydration. The anomalously enhanced (229 nm) ultraviolet resonance Raman (UVRR) imide II band reveals a common structural feature for gels of nondehydrated tau 2-19 and collagen I and insoluble paired helical filaments (PHFs) and collagen I of weak hydrogen bonding at proline carbonyls. Anomalous UVRR enhancement of amide bands at 229 nm results from gel structure, as demonstrated by increased amide absorption at the red edge for tau 2-19 gel and implies the involvement of water in gel structure. In aged, dehydrated tau 2-19 gel, proline carbonyls lose their bonds to water and tyrosine becomes deprotonated, as demonstrated by UVRR spectroscopy. The Fourier transform infrared (FTIR) amide I band shows that antiparallel beta-sheet structure increases with syneresis in the tau 2-19 hydrogel. The comparison of FTIR results for PHFs with collagen I gel and polyproline demonstrates that the secondary structure of PHFs is polyproline II. One implication of this assignment is that the fibrillation of hydrophilic tau is thermodynamically driven by the entropy gained as hydrogen-bonded water is freed, as for collagen I. The FTIR results also show that peptide domains culled from a longer protein do not necessarily fold into identical secondary structures. A pathological, sequential mechanism of gelation, syneresis, and fibrillation for tau in AD is suggested and is supported by the observation of amorphous neurofibrillary tangle development and fibrillation in vivo.

Smart and genetically engineered biomaterials and drug delivery systems

The design, synthesis, and properties of novel stimuli-sensitive and genetically engineered biomaterials and drug delivery systems are reviewed. Two approaches to their engineering are presented. One approach is to improve the traditional methods of synthesis, as demonstrated by the example of controlled copolymerization of alpha-amino acid N-carboxyanhydrides. The other approach, discussed in more detail, uses genetic engineering methods. The design of hybrid hydrogel systems whose components derive from at least two distinct classes of molecules, e.g., synthetic macromolecules and protein domains, is assessed. The design of self-assembling block copolymers is discussed in detail. Finally, the pharmaceutics related applications of these materials are presented.