Alternative intracellular signaling mechanism involved in the inhibitory biological response of functionalized PMMA-based polymers

Fibronectin adsorption on polystyrene sulfonate-grafted polyester using atomic force microscope

Cell adhesion and growth over prostheses are strongly influenced by the adsorption and conformation of adhesive proteins from blood and extracellular matrix, such as fibronectin. This key behavior can be possibly exploited to develop a prosthetic ligament based on the surface bioactivation of biodegradable materials. In this work, surface functionalization was performed by grafting poly(sodium 4-styrene sulfonate) on polyethylene terephthalate and polycaprolactone using a thermal surface-initiated atom transfer radical polymerization grafting technique. The morphology and mechanical properties of the adsorbed fibronectin in the presence of albumin were studied by atomic force microscopy. The morphology of fibronectin on two kinds of polyester surfaces was similar. However, the study results showed a remarkable conformation change of fibronectin when adsorbed onto the nongrafted or grafted surface, leading to an increase in cell adhesion and organization in the second case. This research provided evidence of the relationship between the morphology change of fibronectin to the enhancement of the cell adhesion and spreading on the grafted surface of polyester.

Long-term hydrolytic degradation study of polycaprolactone films and fibers grafted with poly(sodium styrene sulfonate): Mechanism study and cell response

Polycaprolactone (PCL) is a widely used biodegradable polyester for tissue engineering applications when long-term degradation is preferred. In this article, we focused on the analysis of the hydrolytic degradation of virgin and bioactive poly(sodium styrene sulfonate) (pNaSS) functionalized PCL surfaces under simulated physiological conditions (phosphate buffer saline at 25 and 37 °C) for up to 120 weeks with the aim of applying bioactive PCL for ligament tissue engineering. Techniques used to characterize the bulk and surface degradation indicated that PCL was hydrolyzed by a bulk degradation mode with an accelerated degradation-three times increased rate constant-for pNaSS grafted PCL at 37 °C when compared to virgin PCL at 25 °C. The observed degradation mechanism is due to the pNaSS grafting process (oxidation and radical polymerization), which accelerated the degradation until 48 weeks, when a steady state is reached. The PCL surface was altered by pNaSS grafting, introducing hydrophilic sulfonate groups that increase the swelling and smoothing of the surface, which facilitated the degradation. After 48 weeks, pNaSS was largely removed from the surface, and the degradation of virgin and pNaSS grafted surfaces was similar. The cell response of primary fibroblast cells from sheep ligament was consistent with the surface analysis results: a better initial spreading of cells on pNaSS surfaces when compared to virgin surfaces and a tendency to become similar with degradation time. It is worthy to note that during the extended degradation process the surfaces were able to continue inducing better cell spreading and preserve their cell phenotype as shown by collagen gene expressions.

Grafting of Bioactive Polymers with Various Architectures: A Versatile Tool for Preparing Antibacterial Infection and Biocompatible Surfaces

The aim of this Research Article is to present three different techniques of poly(sodium styrene sulfonate) (polyNaSS) covalent grafting onto titanium (Ti) surfaces and study the influence of their architecture on biological response. Two of them are "grafting from" techniques requiring an activation step either by thermal or UV irradiation. The third method is a "grafting to" technique involving an anchorage molecule onto which polyNaSS synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization is clicked. The advantage of the "grafting to" technique when compared to the "grafting from" technique is the ability to control the architecture and length of the grafted polymers on the Ti surface and their influence on the biological responses. This investigation compares the effect of the three different grafting processes on the in vitro biological responses of bacteria and osteoblasts. Overall outcomes of this investigation confirmed the significance of the sulfonate functional groups on the biological responses, regardless of the grafting method. In addition, results showed that the architecture and distribution of grafted polyNaSS on Ti surfaces alter the intensity of the bacteria response mediated by fibronectin.

Bone tissue response induced by bioactive polymer functionalized Ti6Al4V surfaces: In vitro and in vivo study

Ti6Al4V is commonly used for orthopedic applications. This study was designed to test the potentially added benefit of Ti6Al4V functionalized with a bioactive polymer poly(sodium styrene sulfonate) both in vitro and in vivo. Cell-based assays with MC3T3-E1 osteoblast-like cells were used to measure the cell adhesion strength, cell spreading, focal contact formation, cell differentiation and the mineralization of extracellular matrix on grafted and ungrafted Ti6Al4V discs in combination with FBS and collagen type I. Bone morphogenetic protein-2 (BMP-2) was also included in the cell differentiation assay. Results showed that the grafted surface combined with collagen I gave superior levels in every parameter tested with cell-based assays and was almost equivalent to BMP-2 for cell differentiation. In vivo testing was conducted in rabbits (n=42) with cylinders of grafted and ungrafted Ti6Al4V implanted in defects made to the femoral and lateral condyles and animals that were maintained to 1, 3 and 12months. Hydroxyapatite coated Ti6Al4V cylinders were included as a clinical reference control. Osseointegration was assessed post-mortem using histomorphometric analysis conducted on resin sections of explanted undecalcified bone. Two histomorphometric parameters, that of bone-to-implant contact and the bone area, were analyzed by a trained observer blinded to sample identity. Results showed osseointegration on grafted Ti6Al4V was marginally better than both ungrafted and hydroxyapatite coated Ti6Al4V. Overall, the study found that the grafted Ti6Al4V significantly promoted all aspects of osteogenesis tested in vitro and, although in vivo outcomes were less compelling, histomorphometry showed osseointegration of grafted Ti6Al4V implants was equivalent or better than controls.

Competitive Adsorption of Plasma Proteins Using a Quartz Crystal Microbalance

Proteins that get adsorbed onto the surfaces of biomaterials immediately upon their implantation mediate the interactions between the material and the environment. This process, in which proteins in a complex mixture compete for adsorption sites on the surface, is determined by the physicochemical interactions at the interface. Competitive adsorption of bovine serum albumin (BSA), fibronectin (Fn), and collagen type I (Col I), sequentially and from mixtures, was investigated so as to understand the performances of different surfaces used in biomedical applications. A quartz crystal microbalance with dissipation was used to monitor the adsorption of these proteins onto two materials used in functional bone replacement, a titanium alloy (Ti6Al4V) and Ti6Al4V physisorbed with poly(sodium styrenesulfonate) [poly(NaSS)], and three controls, gold, poly(desaminotyrosyltyrosine ethyl ester carbonate) [poly(DTEc)], and polystyrene (PS). In experiments with individual proteins, the adsorption was the highest with Fn and Col I and the least with BSA. Also, protein adsorption was the highest on poly(NaSS) and Ti6Al4V and the least on poly(DTEc). In sequential adsorption experiments, protein exchange was observed in BSA + Fn, Fn + Col I, and BSA + Col I sequences but not in Fn + BSA and Col I + BSA because of the lower affinity of BSA to surfaces relative to Fn and Col I. Protein adsorption was the highest with Col I + Fn on hydrophobic surfaces. In experiments with protein mixtures, with BSA & Fn, Fn appears to be preferentially adsorbed; with Fn & Col I, both proteins were adsorbed, probably as multilayers; and with Col I & BSA, the total amount of protein was the highest, greater than that in sequential and individual adsorption of the two proteins, probably because of the formation of BSA and Col I complexes. Protein conformational changes induced by the adsorbing surfaces, protein-protein interactions, and affinities of proteins appear to be the important factors that govern competitive adsorption. The findings reported here will be useful in understanding the host response to surfaces used for implants.

Contribution of fibronectin and vitronectin to the adhesion and morphology of MC3T3-E1 osteoblastic cells to poly(NaSS) grafted Ti6Al4V

This study is focused on understanding the underlying mechanisms involved in the improved in vitro and in vivo responses of osteoblasts on poly(sodium styrene sulfonate) (poly(NaSS)) functionalized Ti6Al4V surfaces. We probed the contribution of cell-adhesive glycoproteins fibronectin (Fn) and vitronectin (Vn) in the initial adhesion of MC3T3-E1 osteoblastic cells to poly(NaSS) functionalized and control Ti6Al4V surfaces. Firstly, culture media containing serum depleted of Fn and Vn (DD) were used to establish the contribution of Fn and Vn in the adhesion and spreading of cells on poly(NaSS) grafted and control surfaces. Compared to ungrafted surfaces, poly(NaSS) grafted surfaces enhanced the levels of cell adhesion, cell spreading and the formation of intracellular actin cytoskeleton and focal contacts in serum treatments where Fn or Vn were present (FBS, DD+Fn, DD+Vn). Cell responses to Fn were more significant than to Vn. Secondly, blocking Fn and Vn integrin receptors using antibodies to α5β1 (Fn) and αvβ1 (Vn) showed that adhesion of cells to poly(NaSS) grafted surfaces principally involved the Fn integrin receptor α5β1. Thirdly, blocking of the heparin and cell-binding regions of Fn molecule (RGD, C-HB, N-HB) showed that grafting with poly(NaSS) altered the conformation of Fn. Together these outcomes explained why the presence of sulfonate (SO3(-)) groups grafted on the Ti6Al4V surface enhanced the early cell adhesion and spreading processes which determine clinical success for applications that require osseointegration.

STATEMENT OF SIGNIFICANCE

This study is devoted to the basic analysis of the mechanism at the origin of the improved in vitro and in vivo osteoblast cell responses exhibited by poly(sodium styrene sulfonate) (poly(NaSS)) functionalized Ti6Al4V surfaces. The aim was to probe the contribution of cell adhesive glycoproteins fibronectin and vitronectin in the initial adhesion of MC3T3-E1 osteoblastic cells to poly(NaSS) functionalized Ti6Al4V surfaces. The outcomes of this research explained why the presence of SO3(-) (sulfonate) groups grafted on the Ti6Al4V surface enhanced the early cell adhesion and spreading processes which determine clinical success for applications that require osseointegration. This work is a step further in the research of poly(NaSS), a very promising bioactive polymer with potential to the orthopedic and dental fields.

Contributions of adhesive proteins to the cellular and bacterial response to surfaces treated with bioactive polymers: case of poly(sodium styrene sulfonate) grafted titanium surfaces

The research developed on functionalized model or prosthetic surfaces with bioactive polymers has raised the possibility to modulate and/or control the biological in vitro and in vivo responses to synthetic biomaterials. The mechanisms underlying the bioactivity exhibited by sulfonated groups on surfaces involves both selective adsorption and conformational changes of adsorbed proteins. Indeed, surfaces functionalized by grafting poly(sodium styrene sulfonate) [poly(NaSS)] modulate the cellular and bacterial response by inducing specific interactions with fibronectin (Fn). Once implanted, a biomaterial surface is exposed to a milieu of many proteins that compete for the surface which dictates the subsequent biological response. Once understood, this can be controlled by dictating exposure of active binding sites. In this in vitro study, we report the influence of binary mixtures of proteins [albumin (BSA), Fn and collagen type I (Col I)] adsorbed on poly(NaSS) grafted Ti6Al4V on the adhesion and differentiation of MC3T3-E1 osteoblast-like cells and the adhesion and proliferation of Staphylococcus aureus (S. aureus). Outcomes showed that poly(NaSS) stimulated cell spreading, attachment strength, differentiation and mineralization, whatever the nature of protein provided at the interface compared with ungrafted Ti6Al4V (control). While in competition, Fn and Col I were capable of prevailing over BSA. Fn played an important role in the early interactions of the cells with the surface, while Col I was responsible for increased alkaline phosphatase, calcium and phosphate productions associated with differentiation. Poly(NaSS) grafted surfaces decreased the adhesion of S. aureus and the presence of Fn on these chemically altered surfaces increased bacterial resistance ≈70% compared to the ungrafted Ti6Al4V. Overall, our study showed that poly(NaSS) grafted Ti6Al4V selectively adsorbed proteins (particularly Fn) promoting the adhesion and differentiation of osteoblast-like cells while reducing bacterial adhesion to create a bioactive surface with potential for orthopaedic applications.

Poly(NaSS) functionalization modulates the conformation of fibronectin and collagen type I to enhance osteoblastic cell attachment onto Ti6Al4V

Functionalization of surfaces with poly(sodium styrenesulfonate) (poly(NaSS)) has recently been found to enhance osteointegration of implantable materials. Radical polymerization of poly(NaSS) on titanium (Ti)-based substrates has been used to improve their long-term performance by preventing fibrosis and consequently implant loosening. However, the influence of the sulfonate groups on the early cell behavior and the associated molecular phenomena remains to be understood. In this work, we used quartz crystal microbalance with dissipation (QCM-D) to elucidate the role of poly(NaSS) in enhancing osteoblastic cell attachment. This was measured by following the cell attachment using the MC3T3-E1 cell line, on fetal bovine serum (FBS) preadsorbed surfaces and on substrates adsorbed with a series of relevant proteins, bovine serum albumin (BSA), fibronectin (Fn), and collagen type I (Col I). Comparison of the performance of poly(NaSS) with other clinically important substrates such as Ti alloy Ti6Al4V, gold, and poly(desamino-tyrosyl-tyrosine ethyl ester carbonate) (poly(DTEc)) indicates poly(NaSS) to be a superior substrate for MC3T3-E1 cells attachment. This attachment was found to be integrin mediated in the presence of Fn and Col I. Antibodies specific to the RGD peptide and the N- and C-terminal HB-binding domains reacted more intensively with Fn adsorbed on poly(NaSS). Fn adapts a conformation favorable to RGD mediated cell attachment when adsorbed onto poly(NaSS).

PolyNaSS grafting on titanium surfaces enhances osteoblast differentiation and inhibits Staphylococcus aureus adhesion

Titanium surface modifications to simultaneously prevent bacterial adhesion but promote bone-cell functions could be highly beneficial for improving implant osseointegration. In the present in vitro study, the effect of sulfonate groups on titanium surfaces was investigated with respect to both S. aureus adhesion and osteoblast functions pertinent to new bone formation. Commercial pure titanium (cpTi) squares were oxydized (Tiox), grafted with poly(sodium styrene sulfonate) groups (Tigraft) by covalent bonding using radical polymerization, and were characterized by infrared spectroscopy (HATR-FTIR) and colorimetry. Bacterial adhesion study showed that Tigraft exhibited high inhibition of S. aureus adhesion S at levels >90 %, when compared to cpTi (P < 0.05). In contrast osteoblasts adhesion was similar on all three titanium surfaces. While the kinetics of cell proliferation were similar on the three titanium surfaces, Alkaline phosphatase-specific activity of osteoblasts cultured on Tigraft surfaces was twofold higher than that observed on either on Tiox or cpTi surfaces (P < 0.01). More importantly, the amount and the distribution of calcium-containing nodules was different. The total area covered by calcium-containing nodules was 2.2-fold higher on the Tigraft as compared to either Tiox or cpTi surfaces (P < 0.01). These results provide evidence that poly(sodium styrene sulfonate) groups grafting on cpTi simultaneously inhibits bacteria adhesion but promote osteoblast function pertinent to new bone formation. Such modified titanium surfaces offer a promising strategy for preventing biofilm-related infections and enhancing osteointegration of implants in orthopaedic and dental applications.

A bioactive polymer grafted on titanium oxide layer obtained by electrochemical oxidation. Improvement of cell response

The anchorage failure of titanium implants in human body is mainly due to biointegration problem. The proposed solution is to graft a bioactive polymer at the surface of the implant in order to improve and control the interactions with the living system. In this paper, we describe the grafting of poly sodium styrene sulfonate on titanium surface by using a silanization reaction. The key point is to increase the TiOH content at the surface of the implant which can react with methoxy silane groups of 3-methacryloxypropyltrimethoxysilane (MPS). Two procedures were used: chemical oxidation and electrochemical oxidation. The last oxidation procedure was carried out in two different electrolytes: oxalic acid and methanol. These different oxidation methods allow controlling the roughness and the depth of the oxide layer. The methacryloyl group of MPS grafted at the titanium surface by silanization reaction is copolymerized with sodium styrene sulfonate using a thermal initiator able to produce radicals by heating. Colorimetric method, ATR-FTIR, XPS techniques and contact angle measurements were applied to characterize the surfaces. MG63 osteoblastic cell response was studied on polished, oxidized and grafted titanium samples. Cell adhesion, Alkaline Phosphatase activity and calcium nodules formation were significantly enhanced on grafted titanium surfaces compared to un-modified surfaces.

Bone tissue response to titanium implant surfaces modified with carboxylate and sulfonate groups

The present study assessed in vivo new bone formation around titanium alloy implants chemically grafted with macromolecules bearing ionic sulfonate and/or carboxylate groups. Unmodified and grafted Ti-6Al-4V exhibiting either 100% carboxylate, or 100% sulfonate, or both carboxylate and sulfonate groups in the percent of 50/50 and 80/20 were bilaterally implanted into rabbit femoral condyle. Neither toxicity nor inflammation were observed for all implants tested. After 4 weeks, peri-implant new bone formation varied as a function of the chemical composition of the titanium surfaces. The percent bone-implant contact (BIC) was the lowest (13.4 +/- 6.3%) for the implants modified with grafted carboxylate only. The value of BIC on the implants with 20% sulfonate (24.6 +/- 5.2%) was significantly (P < 0.05) lower than that observed on 100% sulfonate (38.2 +/- 13.2%) surfaces. After both 4 and 12 weeks post-implantation, the BIC value for implants with more than 50% sulfonate was similar to that obtained with the unmodified Ti-6Al-4V. The grafted titanium alloy exhibiting either 100% sulfonate or carboxylate and sulfonate (50% each) groups promoted bone formation. Such materials are of clinical interest because, they do not promote bacteria adhesion but, they support new bone formation, a condition which can lead to osseointegration of bone implants while preventing peri-implant infections.

Radical graft polymerization of styrene sulfonate on poly(ethylene terephthalate) films for ACL applications: "grafting from" and chemical characterization

The purpose of this study is to develop a reliable method of functionalizing poly(ethylene terephthalate) with bioactive polymers to produce a "biointegrable" artificial anterior cruciate ligament. Radical graft polymerization of the sodium salt of styrene sulfonate (NaSS) onto poly(ethylene terephthalate) (PET) films was performed using the "grafting from" technique. Prior to the grafting, the surfaces of poly(ethylene terephthalate) films were activated by ozonation to generate peroxide and hydroperoxide reactive species on the PET film surfaces. The radical polymerization of NaSS was initiated by thermal decomposition of the hydroperoxides. The grafted PET surfaces were characterized by a toluidin blue colorimetric method, X-ray photoelectron spectroscopy, contact angle measurements, and atomic force microscopy. The influence of ozonation time, monomer concentration, and temperature on NaSS grafting ratios was examined. A total of 30 min of ozonation followed by grafting from a 15% NaSS solution at 70 degrees C for 90 min or more resulted in attachment of poly(NaSS) chains to the PET film surfaces.

Cellular response to phase-separated blends of tyrosine-derived polycarbonates

Two-dimensional thin films consisting of homopolymer and discrete compositional blends of tyrosine-derived polycarbonates were prepared and characterized in an effort to elucidate the nature of different cell responses that were measured in vitro. The structurally similar blends were found to phase separate after annealing with domain sizes dependent on the overall composition. The thin polymer films were characterized with the use of atomic force microscopy (AFM), water contact angles, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) and significant changes in roughness were measured following the annealing process. Genetic expression profiles of interleukin-1beta and fibronectin in MC3T3-E1 osteoblasts and RAW 264.7 murine macrophages were measured at several time points, demonstrating the time and composition-dependent nature of the cell responses. Real-time reverse transcriptase polymerase chain reaction (RT-PCR) depicted upregulation of the fibronectin gene copy numbers in each of the blends relative to the homopolymers. Moreover, the interleukin-1beta expression profile was found to be compositionally dependent. The data suggest strongly that optimal composition and processing conditions can significantly affect the acute inflammatory and extracellular matrix production responses.

Surface modification of silicone intraocular implants to inhibit cell proliferation

Photo-cross-linkable polymers bearing cinnamic, sulfonate, and carboxylate groups were synthesized by radical polymerization leading to randomly distributed copolymers. These polymers were used to coat silicone intraocular lenses in order to reduce posterior capsule opacification, also named "secondary cataract". We previously demonstrated that polymers containing both carboxylate and sulfonate groups inhibit cell proliferation, and formulations with the ratio R = COO-/(COO- + SO3-) equal to 0.64 provided the highest inhibitory effect. Ionic polymers with this formulation were synthesized to contain a monomer with pendant siloxane groups in order to get compatibility with the silicone matrix of the intraocular lenses. Anchorage of the ionic polymer at the surface of the silicone implant was achieved by a cycloaddition reaction of the photosensitive groups according to two options. These modified silicone surfaces grafted onto intraocular lenses were shown to inhibit cell proliferation to 60%.

Monitoring cell adhesion processes on bioactive polymers with the quartz crystal resonator technique

The Thickness Shear Mode (TSM) quartz crystal resonator has been extensively used as sensitive sensor in various electrochemical and biological applications. This technique based on the propagation of an ultrasonic shear wave generated by a sinusoidal electric field through a piezoelectric quartz resonator, provides a non-destructive and powerful means to probe changes at solid-solid or solid-liquid interfaces. In this study, TSM was used to characterize cell-polymer interactions developing during the cell adhesion process. TSM sensing was used to monitor the inhibiting properties of bioactive polymers towards fibroblast McCoy adhesion processes. For this purpose, thin films of various bioactive polymers exhibiting either carboxylate or/and sulfonate functional groups were deposited onto the TSM. Measurements of the time variation of the electrical motional resistance in the vicinity of the mechanical sensor resonant frequency were performed as the quartz crystal resonator was either coated with the continuous polymer phase or polymer plus cell suspensions. Cell adhesion processes on these surfaces was investigated by cell counting and the quartz resonator-based technique. Inhibition of fibroblast McCoy adhesion onto thin polymer films of various chemical compositions was analyzed and discussed in the perspective of a possible application of these bioactive polymers to fabricate intraocular lenses able to prevent secondary cataract phenomena.

Vitronectin is significant in the adhesion of lens epithelial cells to PMMA polymers

A major complication of intraocular lens surgery is diminished visual acuity caused by the regrowth of lens epithelial cells (secondary cataract). Polymethylmethacrylate (PMMA) is a commonly used intraocular lens material. This study addresses the mechanisms underlying the initial adhesion of lens epithelial cells to PMMA and a functionalized PMMA-based terpolymer known to inhibit cell proliferation. Rabbit lens epithelial cells were cultured on the test polymer surfaces in medium containing serum depleted of either fibronectin or vitronectin (or both) to identify the role of these proteins in the initial process of cell adhesion. Adherent cells were quantitated after 60 min, and the actin cytoskeleton and focal contact formation were compared in each serum treatment on both polymers. Vitronectin was significantly more effective for initial cell attachment to both polymers than fibronectin. Normal cell spreading on PMMA required vitronectin and was independent of fibronectin, whereas cell spreading on the terpolymer was abnormal and required the presence of fibronectin and vitronectin together. Together, these results help to explain the inhibition of cell proliferation previously shown on the functionalized PMMA. This work contributes to the design of a polymer for use in intraocular lenses that inhibits proliferation of the target cells.