Recognition of Glycoprotein Peroxidase via Con A-Carrying Self-Assembly Layer on Gold

Chitooligomer-Immobilized Biointerfaces with Micropatterned Geometries for Unidirectional Alignment of Myoblast Cells

Skeletal muscle possesses a robust capacity to regenerate functional architectures with a unidirectional orientation. In this study, we successfully arranged skeletal myoblast (C2C12) cells along micropatterned gold strips on which chitohexaose was deposited via a vectorial chain immobilization approach. Hexa-N-acetyl-d-glucosamine (GlcNAc6) was site-selectively modified at its reducing end with thiosemicarbazide, then immobilized on a gold substrate in striped micropatterns via S–Au chemisorption. Gold micropatterns ranged from 100 to 1000 µm in width. Effects of patterning geometries on C2C12 cell alignment, morphology, and gene expression were investigated. Unidirectional alignment of C2C12 cells having GlcNAc6 receptors was clearly observed along the micropatterns. Decreasing striped pattern width increased cell attachment and proliferation, suggesting that the fixed GlcNAc6 and micropatterns impacted cell function. Possibly, interactions between nonreducing end groups of fixed GlcNAc6 and cell surface receptors initiated cellular alignment. Our technique for mimicking native tissue organization should advance applications in tissue engineering.

A signal-on electrochemiluminescence biosensor for detecting Con A using phenoxy dextran-graphite-like carbon nitride as signal probe

A novel signal-on electrochemiluminescence (ECL) biosensor for detecting concanavalin A (Con A) was fabricated with phenoxy dextran-graphite-like carbon nitride (DexP-g-C3N4) as signal probe. In this construction strategy, the nanocomposites of three-dimensional graphene and gold nanoparticles (3D-GR-AuNPs) were used as matrix for high loading of glucose oxidase (GOx), which served as recognition element for bounding Con A. Con A further interacted with DexP-g-C3N4 through a specific carbohydrate-Con A interaction to achieve a sandwiched scheme. With the increase of Con A incubated onto the electrode, the ECL signal resulted from DexP-g-C3N4 would enhance, thus achieving a signal-on ECL biosensor for Con A detection. Due to the integration of the virtues of 3D-GR-AuNPs and the excellent ECL performance of DexP-g-C3N4, the prepared biosensor exhibits a wide linear response range from 0.05 ng/mL to 100 ng/mL and a low detection limit of 17 pg/mL (S/N=3).

TiO2-B nanorod based competitive-like non-enzymatic photoelectrochemical sensing platform for noninvasive glucose detection

A new competitive-like non-enzymatic photoelectrochemical biosensor was established for the first time based on a TiO₂-B nanorod platform for noninvasive glucose detection.

Biosensor based on lectin and lipid membranes for detection of serum glycoproteins in infected patients with dengue

In this work, we developed a biosystem based on Concanavalin A (ConA) and lipid membranes to recognize glycoproteins from the serum of patients contaminated with dengue serotypes 1, 2 and 3 (DENV1, DENV2 and DENV3). The modified gold electrode was characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and atomic force microscopy. Morphological analyses of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), DPPC-ConA, DPPC-ConA-DENV1, DPPC-ConA-DENV2 and DPPC-ConA-DENV3 revealed the existence of a non-uniform covering and large globules. EIS and CV measurements have shown that redox probe reactions on the modified gold electrodes were partially blocked due to the adsorption of lipid-ConA system and reveal the interaction response of the immobilized ConA to the presence of glycoproteins of dengue serum. The biosystem exhibited a wide linear response to different concentrations of sera of dengue serotypes 1, 2 and 3. A higher impedimetric response to glycoproteins present in dengue serotype 3 was observed. Our results demonstrate the applicability of lectin and lipid membranes to the development of biosensors for dengue infections.

Glucose biosensor based on titanium dioxide-multiwall carbon nanotubes-chitosan composite and functionalized gold nanoparticles

In this paper, a new glucose biosensor was prepared. At first, Prussian blue (PB) was electrodeposited on a glassy carbon electrode (GCE) modified by titanium dioxide-multiwall carbon nanotubes-chitosan (TiO(2)-MWNTs-CS) composite, and then gold nanoparticles functionalized by poly(diallyldimethylammonium chloride) (PDDA-Au) were adsorbed on the PB film. Finally, the negatively charged glucose oxidase (GOD) was self-assembled on to the positively charged PDDA-Au. The electrochemical performances of the modified electrodes had been studied by cyclic voltammetry (CV) and amperometric methods, respectively. In addition, the stepwise fabrication process of the as-prepared biosensor was characterized by scanning electron microscopy. PDDA-Au nanoparticles were characterized by ultraviolet-vis absorption spectroscopy and transmission electron microscopy. Under the optimal conditions, the as-prepared biosensor exhibited a good response performance to glucose with a linear range from 6 μM to 1.2 mM with a detection limit of 0.1 μM glucose (S/N = 3). In addition, this work indicated that TiO(2)-MWNTs-CS composite and PDDA-Au nanoparticles held great potential for constructing biosensors.

A selective novel non-enzyme glucose amperometric biosensor based on lectin-sugar binding on thionine modified electrode

A novel non-enzyme glucose amperometric biosensor was fabricated based on biospecific binding affinity of concanavalin A (Con A) for D-glucose on thionine (TH) modified electrode. TH can be covalently immobilized on potentiostatically activated glassy carbon electrode through Schiff-base reaction. Subsequently, the surface-adherent polydopamine film formed by self-polymerization of dopamine attached to TH and afforded binding sites for the subsequent immobilization of Con A molecules via Michael addition and/or Schiff-base reaction with high stability. Thus, a sensing platform for specific detection towards D-glucose was established. The binding of Con A towards D-glucose can be monitored through the decrease of the electrode response of the TH moiety. Due to the high affinity of Con A for D-glucose and high stability of the resulting sensing platform, the fabricated biosensor exhibited high selectivity, good sensitivity, and wide linear range from 1.0×10(-6) to 1.0×10(-4) M with a low detection limit of 7.5×10(-7) M towards D-glucose.

A simple strategy for one-step construction of bienzyme biosensor by in-situ formation of biocomposite film through electrodeposition

One-step construction of horseradish peroxidase (HRP) and glucose oxidase (GOD) bienzyme biosensor was established based on a simple and controllable electrodeposition approach by in-situ formation of biocomposite film on electrode. With hydrogen peroxide (H(2)O(2)) instantly generated by GOD-catalyzed oxidation of glucose, quantitative measurement of glucose could be achieved. In the proposed electrodeposition strategy, Concanavalin A (Con A) was applied as bifunctional cross-linker for in-situ incorporating of HRP-GOD in biocompatible chitosan (CS) matrix due to its biospecific affinity interaction with CS and glycoproteins. Scanning electron microscopy showed that the HRP-GOD/Con A/CS biocomposite film possessed highly porous surface. The developed bienzyme biosensor exhibited a fast amperometric response for the determination of glucose. The linear response of the developed biosensor for the determination of glucose ranged from 1.0x10(-6) to 2.2x10(-4) M with a detection limit of 6.7x10(-7) M. The biosensor can be used to determine glucose in serum directly. The biosensor presented high stability owing to the design of the introduction of Con A and instant generation of H(2)O(2) with bienzyme system. The one-step construction of biosensor based on non-manual technique in biocompatible environment was direct and facile.