Osteoconductive and Bioresorbable Composites Based on Poly(l,l-lactide) and Pseudowollastonite: From Synthesis and Interfacial Compatibilization to In Vitro Bioactivity and In Vivo Osseointegration Studies

Interfacial Compatibilization into PLA/Mg Composites for Improved In Vitro Bioactivity and Stem Cell Adhesion

The present work highlights the crucial role of the interfacial compatibilization on the design of polylactic acid (PLA)/Magnesium (Mg) composites for bone regeneration applications. In this regard, an amphiphilic poly(ethylene oxide-b-L,L-lactide) diblock copolymer with predefined composition was synthesised and used as a new interface to provide physical interactions between the metallic filler and the biopolymer matrix. This strategy allowed (i) overcoming the PLA/Mg interfacial adhesion weakness and (ii) modulating the composite hydrophilicity, bioactivity and biological behaviour. First, a full study of the influence of the copolymer incorporation on the morphological, wettability, thermal, thermo-mechanical and mechanical properties of PLA/Mg was investigated. Subsequently, the bioactivity was assessed during an in vitro degradation in simulated body fluid (SBF). Finally, biological studies with stem cells were carried out. The results showed an increase of the interfacial adhesion by the formation of a new interphase between the hydrophobic PLA matrix and the hydrophilic Mg filler. This interface stabilization was confirmed by a decrease in the damping factor (tanδ) following the copolymer addition. The latter also proves the beneficial effect of the composite hydrophilicity by selective surface localization of the hydrophilic PEO leading to a significant increase in the protein adsorption. Furthermore, hydroxyapatite was formed in bulk after 8 weeks of immersion in the SBF, suggesting that the bioactivity will be noticeably improved by the addition of the diblock copolymer. This ceramic could react as a natural bonding junction between the designed implant and the fractured bone during osteoregeneration. On the other hand, a slight decrease of the composite mechanical performances was noted.

Phase pure, high hardness, biocompatible calcium silicates with excellent anti-bacterial and biofilm inhibition efficacies for endodontic and orthopaedic applications

Here we report for the very first time the synthesis of 100% phase pure calcium silicate nanoparticles (CSNPs) of the α-wollastonite phase without using any surfactant or peptizer at the lowest ever reported calcination temperature of 850 °C. Further, the phase purity is confirmed by quantitative phase analysis. The nano-network like microstructure of the CSNPs is characterized by FTIR, Raman, XRD, FESEM, TEM, TGA, DSC etc. techniques to derive the structure property correlations. The performance efficacies of the CSNPs against gram-positive e.g., S. pyogenes and S. aureus (NCIM2127) and gram-negative e.g., E. coli (NCIM2065) bacterial strains are studied. The biocompatibility of the CSNPs is established by using the conventional mouse embryonic osteoblast cell line (MC3T3). In addition, the biofilm inhibition efficacies of two varieties of CSNPs e.g., CSNPs(W) and CSNPs(WC) are investigated. Further, the interconnection between ROS e.g., superoxide (O₂^.-) and hydroxyl radical (^.OH) generation capabilities of CSNPs and their biofilm inhibition efficacies is clearly established for the very first time. Finally, the mechanical responses of the CSNPs at the microstructural length scale are investigated by nanoindentation. The results confirm that the α-wollastonite phases present in CSNPs(W) and CSNPs(WC) possess extraordinarily high nanohardness and Young's moduli values. Therefore, these materials are well suited for orthopaedic and endodontic applications.

Biocompatible Nanobioglass Reinforced Poly(ε-Caprolactone) Composites Synthesized via In Situ Ring Opening Polymerization

Poly(ε-caprolactone) (PCL) is a bioresorbable synthetic polyester widely studied as a biomaterial for tissue engineering and controlled release applications, but its low bioactivity and weak mechanical performance limits its applications. In this work, nanosized bioglasses with two different compositions (SiO₂–CaO and SiO₂–CaO–P₂O₅) were synthesized with a hydrothermal method, and each one was used as filler in the preparation of PCL nanocomposites via the in situ ring opening polymerization of ε-caprolactone. The effect of the addition of 0.5, 1 and 2.5 wt % of the nanofillers on the molecular weight, structural, mechanical and thermal properties of the polymer nanocomposites, as well as on their enzymatic hydrolysis rate, bioactivity and biocompatibility was systematically investigated. All nanocomposites exhibited higher molecular weight values in comparison with neat PCL, and mechanical properties were enhanced for the 0.5 and 1 wt % filler content, which was attributed to extensive interactions between the filler and the matrix, proving the superiority of in situ polymerization over solution mixing and melt compounding. Both bioglasses accelerated the enzymatic degradation of PCL and induced bioactivity, since apatite was formed on the surface of the nanocomposites after soaking in simulated body fluid. Finally, all samples were biocompatible as Wharton jelly-derived mesenchymal stem cells (WJ-MSCs) attached and proliferated on their surfaces.

Influence of needle-like morphology on the bioactivity of nanocrystalline wollastonite--an in vitro study

In the past 2 decades, wollastonite has been studied thoroughly for its application as a bone implant material due to its biocompatibility, high mechanical strength, and excellent bioactivity when compared to calcium phosphates bioceramics. Wollastonite was prepared through the low-temperature sol-gel combustion method using urea as the fuel, nitrate ions and nitric acid as the oxidizer. Calcium nitrate and tetraethyl orthosilicate were taken as the source of calcium and silica. The synthesized wollastonite were characterized by Fourier transform infrared spectroscopy for the identification of characteristic functional group and powder X-ray diffraction for the phase identification. Employing urea as a fuel resulted in needle-like morphology of the particles, which was confirmed by scanning electron microscopy and transmission electron microscopy. It was observed that the needle-like morphology enhances the mechanical properties such as elasticity and compressive strength and also increases the surface area of the material, which could help in a rapid deposition of hydroxyapatite layer. These properties of wollastonite warrant its application as a new artificial bone material in the field of hard tissue engineering.

Preparation and in vitro cell-biological performance of sodium alginate/nano-zinc silicate co-modified calcium silicate bioceramics

We have prepared a (Zn, Na)-containing layer on the surface of calcium silicate bioceramics, which are spin-coated with sodium alginate and nano-zinc silicate.

Nanosized mesoporous bioactive glass/poly(lactic-co-glycolic acid) composite-coated CaSiO3 scaffolds with multifunctional properties for bone tissue engineering

It is of great importance to prepare multifunctional scaffolds combining good mechanical strength, bioactivity, and drug delivery ability for bone tissue engineering. In this study, nanosized mesoporous bioglass/poly(lactic-co-glycolic acid) composite-coated calcium silicate scaffolds, named NMBG-PLGA/CS, were successfully prepared. The morphology and structure of the prepared scaffolds were characterized by scanning electron microscopy and X-ray diffraction. The effects of NMBG on the apatite mineralization activity and mechanical strength of the scaffolds and the attachment, proliferation, and alkaline phosphatase activity of MC3T3 cells as well as drug ibuprofen delivery properties were systematically studied. Compared to pure CS scaffolds and PLGA/CS scaffolds, the prepared NMBG-PLGA/CS scaffolds had greatly improved apatite mineralization activity in simulated body fluids, much higher mechanical property, and supported the attachment of MC3T3 cells and enhanced the cell proliferation and ALP activity. Furthermore, the prepared NMBG-PLGA/CS scaffolds could be used for delivering ibuprofen with a sustained release profile. Our study suggests that the prepared NMBG-PLGA/CS scaffolds have improved physicochemical, biological, and drug-delivery property as compared to conventional CS scaffolds, indicating that the multifunctional property of the prepared scaffolds for the potential application of bone tissue engineering.

Synthesis, Characterization and Bioactivity Studies of Calcium Silicate Bioceramics

Wollastonite is one of the most widely used bioceramic due to its biocompatibility and bioactivity. Wollastonite (CaSiO3) was synthesized by sol-gel combustion process using citric acid as a fuel/reductant and nitrate as an oxidant. Calcium nitrate was taken as a source of calcium and tetraethyl orthosilicate was taken as the source of silicate. The obtained product was characterized by powder X-ray diffraction, Fourier - Transform Infrared spectroscopy and Scanning electron microscopy. The XRD pattern shows that the product formed is a pure and single phasic wollastonite. The FT-IR spectra revealed that there is no secondary phase present in the product. The SEM image shows that the product is highly porous. The particle size calculated using Scheerer’s formula shows that the particles are in a nano regime.