Amplified Fluorescent Sensing of DNA Using Graphene Oxide and a Conjugated Cationic Polymer

Magnetic beads and GO-assisted enzyme-free signal amplification fluorescent biosensors for disease diagnosis

Cancer detection is still a major challenge in public health. Identification of oncogene is the first step toward solving this problem. Studies have revealed that various cancers are associated with miRNA expression. Therefore, the sensitive detection of miRNA is substantially important to solve the cancer problem. In this study, let-7a, a representative substance of miRNA, was selected as the detection target. With the assistance of magnetic beads commonly used in biosensors and self-synthesized graphene oxide materials, specificity and sensitivity detection of the target gene let-7a were achieved via protease-free signal amplification. The limit of detection (LOD) was as low as 15.015pM. The fluorescence signal intensity showed a good linear relationship with the logarithm of let-7a concentration. The biosensor could also detect let-7a in complex human serum samples. Overall, this fluorescent biosensor is not only simple to operate, but also strongly specificity to detect let-7a. Therefore, it has substantial potential for application in the early diagnosis of clinical medicine and biological research.

Metallic nanostructure-based aptasensors for robust detection of proteins

There is a significant need for fast, cost-effective, and highly sensitive protein target detection, particularly in the fields of food, environmental monitoring, and healthcare. The integration of high-affinity aptamers with metal-based nanomaterials has played a crucial role in advancing the development of innovative aptasensors tailored for the precise detection of specific proteins. Aptamers offer several advantages over commonly used molecular recognition methods, such as antibodies. Recently, a variety of metal-based aptasensors have been established. These metallic nanomaterials encompass noble metal nanoparticles, metal oxides, metal-carbon nanotubes, carbon quantum dots, graphene-conjugated metallic nanostructures, as well as their nanocomposites, metal-organic frameworks (MOFs), and MXenes. In general, these materials provide enhanced sensitivity through signal amplification and transduction mechanisms. This review primarily focuses on the advancement of aptasensors based on metallic materials for the highly sensitive detection of protein targets, including enzymes and growth factors. Additionally, it sheds light on the challenges encountered in this field and outlines future prospects. We firmly believe that this review will offer a comprehensive overview and fresh insights into metallic nanomaterials-based aptasensors and their capabilities, paving the way for the development of innovative point-of-care (POC) diagnostic devices.

Comparative Investigation of Ultrafast Excited-State Electron Transfer in Both Polyfluorene-Graphene Carboxylate and Polyfluorene-DCB Interfaces

The Photophysical properties, such as fluorescence quenching, and photoexcitation dynamics of bimolecular non-covalent systems consisting of cationic poly[(9,9-di(3,3'-N,N'-trimethyl-ammonium) propyl fluorenyl-2,7-diyl)-alt-co-(9,9-dioctyl-fluorenyl-2,7-diyl)] diiodide salt (PFN) and anionic graphene carboxylate (GC) have been discovered for the first time via steady-state and time-resolved femtosecond transient absorption (TA) spectroscopy with broadband capabilities. The steady-state fluorescence of PFN is quenched with high efficiency by the GC acceptor. Fluorescence lifetime measurements reveal that the quenching mechanism of PFN by GC is static. Here, the quenching mechanisms are well proven via the TA spectra of PFN/GC systems. For PFN/GC systems, the photo electron transfer (PET) and charge recombination (CR) processes are ultrafast (within a few tens of ps) compared to static interactions, whereas for PFN/1,4-dicyanobenzene DCB systems, the PET takes place in a few hundreds of ps (217.50 ps), suggesting a diffusion-controlled PET process. In the latter case, the PFN+•-DCB-• radical ion pairs as the result of the PET from the PFN to DCB are clearly resolved, and they are long-lived. The slow CR process (in 30 ns time scales) suggests that PFN+• and DCB-• may already form separated radical ion pairs through the charge separation (CS) process, which recombine back to the initial state with a characteristic time constant of 30 ns. The advantage of the present positively charged polyfluorene used in this work is the control over the electrostatic interactions and electron transfers in non-covalent polyfluorene/quencher systems in DMSO solution.

Cationic Conjugated Polymer Fluorescence Resonance Energy Transfer for DNA Methylation Assessment to Discriminate the Geographical Origins of Lonicerae japonicae flos

The flavor and taste of Lonicerae japonicae flos (LJF) products are heavily influenced by geographical origin. Tracing the geographical origin is an important aspect of LJF quality assessment. Here, DNA methylation analysis coupled with chemometrics revealed that, in 10 CpG islands upstream of genes in the chlorogenic acid and iridoid biosynthetic pathways, DNA methylation differences appear close association with LJF geographical origin. DNA methylation status in these CpG islands was determined using the cationic conjugated polymer fluorescence resonance energy transfer method. As a result, LJFs from 39 geographical origins were classified into four groups corresponding to Northern China, Central Plain of China, Southeast China, and Western China, according to cluster analysis and principal component analysis. Our findings contribute to an understanding of the modulation of LJF taste and can assist in understanding how DNA methylation in LJF varies with geographical origin.

A fluorescence biosensor based on double-stranded DNA and a cationic conjugated polymer coupled with exonuclease III for acrylamide detection

As a toxic substance on human health produced in food thermal treatment, simple analytical approaches are highly desired for the detection of acrylamide (ACR) in foods. With the aid of exonuclease III (Exo III), a simple fluorescence sensor was proposed based on carboxyfluorescein-labeled double-stranded DNA (FAM-dsDNA) and a cationic conjugated polymer (PFP). Fluorescence resonance energy transfer (FRET) efficiency between FAM and PFP was changed with and without ACR. When ACR was present, ACR and single-stranded DNA (P1, ssDNA) formed an adduct, allowing free FAM-labeled complementarity strand DNA (P2, FAM-csDNA) to appear in the solution and avoiding the digestion of P2 by Exo III. After the addition of PFP, the interaction of PFP and FAM induced strong FRET. Under optimized conditions, ACR was detected with a limit of detection (LOD) of 0.16 μM. According to this biosensor, a LOD of 1.3 μM in water extract samples was observed with a good recovery rate (95-110 %).

Machine Learning-Assisted Pattern Recognition of Amyloid Beta Aggregates with Fluorescent Conjugated Polymers and Graphite Oxide Electrostatic Complexes

Five fluorescent positively charged poly(para-aryleneethynylene) (P1-P5) were designed to construct electrostatic complexes C1-C5 with negatively charged graphene oxide (GO). The fluorescence of conjugated polymers was quenched by the quencher GO. Three electrostatic complexes were enough to distinguish between 12 proteins with 100% accuracy. Furthermore, using these sensor arrays, we could identify the levels of Aβ40 and Aβ42 aggregates (monomers, oligomers, and fibrils) via employing machine learning algorithms, making it an attractive strategy for early diagnosis of Alzheimer's disease.

A sensitive biomolecules detection device with catalytic hairpin assembly and cationic conjugated polymer-assisted dual signal amplification strategy

A simple, sensitive, selective, and enzyme-free homogeneous fluorescent biosensing device for DNA and protein detection is fabricated based on catalytic hairpin assembly (CHA), cationic conjugated polymer (CCP), and graphene oxide (GO). In this biosensing device, CCP together with CHA, provides dual signal amplification, and GO suppresses the background when the target is absent. Thus, this CHA/CCP/GO-based biosensor shows improved sensitivity compared with conventional CHA-based biosensors. In the biosensor, two 6-carboxyfluorescein (FAM)-labeled hairpin DNA probes (H1 and H2) are designed, and in the initial state, they could absorb on the surface of GO, leading the system to produce a low background fluorescence signal. When the target DNA appears, it continually catalyzes the formation of H1-H2 double-stranded DNA (dsDNA) complex by CHA reaction, which could be regarded as the first-step amplification. At the same time, the H1-H2 dsDNA complex departures from the surface of GO and interacts with CCP through electrostatic interaction. Then, CCP provides the second-step amplification due to its high fluorescence resonance energy transfer (FRET) efficiency from CCP to FAM. The limit of detection (LOD) and the limit of quantification (LOQ) for the target DNA could reach 32 pM and 1 nM, respectively. The linear range was from 0.1 to 40 nM, and relative standard deviation (RSD) for the points on the calibration curve ranged from 2.8% to 13.9%. This strategy could also be applied to protein detection potentially by integrating the aptamer of the target protein into the hairpin DNA. As proof of concept, thrombin was detected, and the LOD and LOQ was 11 pM and 33 pM, respectively. The linear range was from 3 to 54 nM, and RSD ranged from 3.3% to 10.4%. It showed good selectivity for thrombin compared to equal concentrations of interferences. It was also applied to quantify the thrombin (5, 10, 20 nM) in 1% spiked human serum, which showed satisfying recovery in the range of 94.7 ± 5.3 to 103.7 ± 4.9%.

Polysaccharide-enhanced ARGET ATRP signal amplification for ultrasensitive fluorescent detection of lung cancer CYFRA 21-1 DNA

An ultrasensitive fluorescence biosensor for detecting cytokeratin fragment antigen 21-1 (CYFRA 21-1) DNA of non-small cell lung carcinoma (NSCLC) is designed using polysaccharide and activator regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) signal amplification strategy. Thiolated peptide nucleic acid (PNA) is fixed on magnetic nanoparticles (MNPs) by a cross-linking agent and hybridized with CYFRA 21-1 DNA. Hyaluronic acid (HA) is linked to PNA/tDNA heteroduplexes in the form of carboxy-Zr⁴⁺-phosphate. Subsequently, multiple 2-bromo-2-methylpropionic acid (BMP) molecules are linked with HA to initiate ARGET ATRP reaction. Finally, a large number of fluorescein o-acrylate (FA) monomers are polymerized on the macro-initiators, and the fluorescence signal is significantly amplified. Under optimal conditions, this biosensor shows a significant linear correlation between the fluorescence intensity and logarithm of CYFRA 21-1 DNA concentration (0.1 fM to 0.1 nM), and the limit of detection is as low as 78 aM. Furthermore, the sensor has a good ability to detect CYFRA 21-1 DNA in serum samples and to recognize mismatched bases. It suggests that the strategy has broad application in early diagnosis by virtue of its high sensitivity and selectivity. Graphical abstract A novel and highly sensitive fluorescence biosensor for quantitatively detecting CYFRA 21-1 DNA via dual signal amplification of hyaluronic acid and ARGET ATRP reaction was developed. This proposed method has a low detection limit, wide detection range, high selectivity, and strong anti-interference.

Swollen liquid crystalline mesophase assisted synthesis of GO-PANI nanocomposite as a fluorescent probe for purines

This article focuses on the use of graphene oxide-polyaniline (GO-PANI) nanocomposite as fluorescent probe for sensing of adenine (A) and guanine (G). Swollen liquid crystalline mesophase were used for the synthesis of graphene oxide-polyaniline nanocomposite. GO-PANI nanocomposite showed enhanced fluorescent at 441 nm (ƛ _excitation = 361 nm) on interaction of purines viz A and G solutions in dimethyl sulfoxide, GO exhibited quenching at 540 nm (ƛ _excitation = 261 nm). The fluorescence emission spectra of GO-PANI nanocomposite and GO were recorded in the the pressence of A and G concentrations upto 1.2 × 10^-4 M. The limits of detection (LOD) calculated from the concentration dependence study for GO-PANI nanocomposite and GO are 7.5 × 10^-6 M and 13.4 × 10^-6 M respectively. The LOD in the case of GO is identical for both A (13.0 × 10^-6) and G (13.6 × 10^-6 M). The binding constant (K_b) determined for GO-PANI with purines are in the range of 0.05-0.08 × 10³ M^-1 which is higher in the case of GO (2.42-7.52 × 10³ M^-1). The lifetime measurement demonstrates, an excited state interaction of GO-PANI nanocomposite and GO with purines. This is evident from the increasing lifetime from 4.3 ns to 29.2 ns for GO-PANI nanocomposite, while 17.5 ns to 37.2 ns for GO respectively. The relatively short lifetime of the GO-PANI nanocomposite in comparison with GO suggest an electronic charge dissipation of the excited state between polyaniline and graphene oxide possibly due to the alignment of polyaniline on the graphene oxide sheet. The photopysical properties of GO-PANI nanocomposite and GO observed in this study is new and has potential for application as fluorescent probe for the detection of purines.

A cationic conjugated polymer and graphene oxide: Application to amplified fluorescence detection of sinapine

An amplified fluorescence strategy is described for the detection of sinapine (SP) by using a cationic conjugated polymer (PFP) and graphene oxide (GO). It is observed that the fluorescein (FAM)-labeled single-stranded DNA (FAM-DNA) is absorbed on the surface of GO if SP is absent. This causes that fluorescence resonance energy transfer (FRET) from PFP to FAM is inefficient when adding PFP into FAM-DNA/GO complex. If SP is added to FAM-DNA/GO complex, FAM-DNA is desorbed from GO surface due to the competitive binding of SP and FAM-DNA toward GO. In this case, FAM-DNA is close to PFP in the presence of PFP through strong electrostatic interaction, leading to the occurrence of efficient FRET. Based on the above phenomenon, we demonstrate a method to amplify fluorescence signal of traditional GO-based SP assay by introducing PFP. In comparison to the use of single GO, the combination of PFP with GO-based strategy displays high turn-on ratio and enhanced sensitivity with a limit of detection as low as 7.3 ng mL^-1 for SP detection. Satisfactory results in practical samples are also obtained by the recovery experiments, demonstrating the potential application of cationic conjugated polymer in plant-derived small molecule.

A fluorometric aptamer-based assay for ochratoxin A using magnetic separation and a cationic conjugated fluorescent polymer

A fluorometric aptamer-based assay for ochratoxin A (OTA) is described. It is making use of magnetic separation and a cationic conjugated fluorescent polymer. Amino-tagged aptamer (Apt) against OTA is immobilized on magnetic beads (MBs) to form a conjugate of type Apt-MBs. The immobilized aptamer is partially complementary to carboxyfluorescein-labeled DNA which binds to the Apt-MBs via hybridization if OTA is absent. Only few FAM-DNA will remain in the supernatant after magnetic separation, and only weak fluorescence resonance energy transfer (FRET) occurs on addition of the fluorescent polymer. If, however, OTA is present, it will bind to the aptamer and prevent the hybridization between Apt-DNA and FAM-DNA. This results in the presence of large amounts of FAM-DNA in the supernatant after magnetic separation. On addition of fluorescent polymer, efficient FRET occurs from the polymer to FAM-DNA. Fluorescence, best measured at excitation/emission peaks of 370/530 nm, increases with increasing concentrations of OTA. This assay is highly sensitive and selective. The detection limit is as low as 0.11 ng mL^-1. This is 6 times lower than the aptamer assay without using the fluorescent polymer. Conceivably, this method has a wider scope in that it may be extended to other mycotoxins by simply changing the aptamer. Graphical Abstract Schematic of a fluorometric aptamer assay for ochratoxin A (OTA). It is based on magnetic separation coupled with a cationic conjugated polymer (PFP).

A cationic conjugated polymer coupled with exonuclease I: application to the fluorometric determination of protein and cell imaging

A strategy is described for the detection of protein by using a cationic fluorescent conjugated polymer coupled with exonuclease I (Exo I). Taking streptavidin (SA) as model protein, it is observed that Exo I can digest single-stranded DNA conjugated with biotin and carboxyfluorescein (P1) if SA is absent. This leads to the formation of small nucleotide fragments and to weak fluorescence resonance energy transfer (FRET) from the polymer to P1. If, however, SA is present, the high affinity of SA and biotin prevents the digestion of P1 by Exo I. This results in the sorption of P1 on the surface of the polymer through strong electrostatic interaction. Hence, efficient FRET occurs from the fluorescent polymer to the fluorescent label of P1. Fluorescence is measured at an excitation wavelength of 370 nm, and emission is measured at two wavelengths (530 and 425 nm). The ratio of the two intensities (I₅₃₀/I₄₂₅) is directly related to the concentration of SA. Under the optimal conditions, the assay has a detection limit of 1.3 ng·mL^-1. The method was also applied to image the folate receptor in HeLa cells, thus demonstrating the versatility of this strategy. Graphical abstract A fluorometric strategy is described for protein detection and cell imaging based on a cationic conjugated polymer (PFP) coupled with exonuclease I (Exo I) trigged fluorescence resonance energy transfer (FRET).

Oligo(p-phenylene ethynylene) with Cyanoacrylate Terminal Groups and Graphene Composite as Fluorescent Chemical Sensor for Cysteine

A chemical sensor for cysteine (Cys) was fabricated based on a fluorescent oligo(p-phenylene ethynylene)s (OPEs) and OPE-graphene oxide (GO) composite. OPE with cyanoacrylate terminal groups were synthesized by a Pd-catalyzed Sonogashira coupling reaction and Knoevenagel condensation for use as a chemical sensor for Cys. The optical properties and Cys sensing capability of the cyanoacrylate modified OPE and OPE-GO composite were investigated. In addition of Cys, the fluorescence of OPE was blue-shifted and decreased (fluorescence turn-off), while the fluorescence of the OPE-GO composite was enhanced (fluorescence turn-on). Thus, OPE with cyanoacrylate terminal groups and OPE-GO composite acts a highly sensitive fluorescent chemical sensor for Cys.

DNA-stabilized silver nanoclusters and carbon nanoparticles oxide: A sensitive platform for label-free fluorescence turn-on detection of HIV-DNA sequences

Based on the remarkable difference between the interactions of carbon nanoparticles (CNPs) oxide with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), and the fact that fluorescence of DNA-stabilized silver nanoclusters (AgNCs) can be quenched by CNPs oxide, DNA-functionalized AgNCs were applied as label-free fluorescence probes and a novel fluorescence resonance energy transfer (FRET) sensor was successfully constructed for the detection of human immunodeficiency virus (HIV) DNA sequences. CNPs oxide were prepared with the oxidation of candle soot, hence it is simple, time-saving and low-cost. The strategy of dual AgNCs probes was applied to improve the detection sensitivity by using dual- probe capturing the same target DNA in a sandwich mode and as the fluorescence donor, and using CNPs oxide as the acceptor. In the presence of target DNA, a dsDNA hybrid forms, leading to the desorption of the ssDNA-AgNCs probes from CNPs oxide, and the recovering of fluorescence of the AgNCs in a HIV-DNA concentration-dependent manner. The results show that HIV-DNA can be detected in the range of 1-50nM with a detection limit of 0.40nM in aqueous buffer. The method is simple, rapid and sensitive with no need of labeled fluorescent probes, and moreover, the design of fluorescent dual-probe makes full use of the excellent fluorescence property of AgNCs and further improves the detection sensitivity.

Functionalized graphene oxide quantum dot-PVA hydrogel: a colorimetric sensor for Fe²⁺, Co²⁺ and Cu²⁺ ions

Functionalized graphene oxide quantum dots (GOQDs)-poly(vinyl alcohol) (PVA) hybrid hydrogels were prepared using a simple, facile and cost-effective strategy. GOQDs bearing different surface functional groups were introduced as the cross-linking agent into the PVA matrix thereby resulting in gelation. The four different types of hybrid hydrogels were prepared using graphene oxide, reduced graphene oxide, ester functionalized graphene oxide and amine functionalized GOQDs as cross-linking agents. It was observed that the hybrid hydrogel prepared with amine functionalized GOQDs was the most stable. The potential applicability of using this solid sensing platform has been subsequently explored in an easy, simple, effective and sensitive method for optical detection of M(2+) (Fe(2+), Co(2+) and Cu(2+)) in aqueous media involving colorimetric detection. Amine functionalized GOQDs-PVA hybrid hydrogel when put into the corresponding solution of Fe(2+), Co(2+) and Cu(2+) renders brown, orange and blue coloration respectively of the solution detecting the presence of Fe(2+), Co(2+) and Cu(2+) ions in the solution. The minimum detection limit observed was 1 × 10(-7) M using UV-visible spectroscopy. Further, the applicability of the sensing material was also tested for a mixture of co-existing ions in solution to demonstrate the practical applicability of the system. Insight into the probable mechanistic pathway involved in the detection process is also being discussed.

A WS2 nanosheet-based platform for fluorescent DNA detection via PNA-DNA hybridization

The WS2 nanosheet, a two-dimensional layered nanomaterial, shows high fluorescence quenching ability for the dye-labeled ssDNA. Currently, most of the fluorescent DNA detection methods employ DNA as a probe for recognition of target DNA. Peptide nucleic acid (PNA) is a DNA mimic but a neutral molecule, showing superior hybridization properties to target DNA. Based on the unique properties of WS2 nanosheet and PNA-DNA hybridization, we have developed a rapid, simple, stable and sensitive approach for DNA detection based on good fluorescence quenching ability of the WS2 nanosheet as well as high binding affinity and specificity of PNA to DNA. This novel assay is capable of exhibiting high sensitivity and specificity with a detection limit of 500 pM, and discriminating between single bases.

Polyelectrolyte-graphene Nanocomposites for Biosensing Applications

Due to their unique structure, the optical and mechanical properties graphene and its derivatives (e.g. graphene oxide, reduced graphene oxide) have captured the attention of a constantly increasing number of scientists with regards to biomolecule sensing. This mini review focuses on one specific type of sensor, that consisting of graphene and polyelectrolytes. Polyelectrolyte-graphene nanocomposites exhibit outstanding detection capabilities by synergistically combining the characteristics of both components, outperforming traditional sensors in many cases. Characteristics and mechanistic details of the most important polyelectrolyte-graphene based sensors will be discussed in detail in addition to some current challenges and future perspectives.

Thioflavin T as an Efficient G-Quadruplex Inducer for the Highly Sensitive Detection of Thrombin Using a New Föster Resonance Energy Transfer System

We report a new Föster resonance energy transfer (FRET) system that uses a special dye, thioflavin T (ThT), as an energy acceptor and a water-soluble conjugated polymer (CP) with high fluorescence as an energy donor. A simple, label-free, and sensitive strategy for the detection of thrombin in buffer and in diluted serum was designed based on this new system using ThT as an efficient inducer of the G-quadruplex. The difference between the blank and the positive samples was amplified due to distinctive FRET signals because thrombin has little effect on the intercalation of ThT into the G-quadruplex. In the absence of the target, ThT induces the aptamer to form a G-quadruplex and intercalates into it with strong fluorescence. The electrostatic attractions between the negatively charged G-quadruplex and positively charged CP allow a short donor-acceptor distance, resulting in a high FRET signal. However, in the presence of the target, the aptamer forms a G-quadruplex-thrombin complex first, followed by the intercalation of ThT into the G-quadruplex. A long distance exists between the donor and acceptor due to the strong steric hindrance from the large-sized thrombin, which leads to a low FRET signal. Compared with previously reported strategies based on the FRET between the CP and dye, our strategy is label-free, and the sensitivity was improved by an order of magnitude. Our strategy also shows the advantages of being simple, rapid (about 50 min), sensitive, label-free, and low-cost in comparison to strategies based on the FRET between quantum dots and dyes.

Graphene oxide-assisted nucleic acids assays using conjugated polyelectrolytes-based fluorescent signal transduction

In this work, we investigated the interactions between graphene oxide (GO) and conjugated polyelectrolytes (CPEs) with different backbone and side chain structures. By studying the mechanism of fluorescence quenching of CPEs by GO, we find that the charge and the molecular structure of CPEs play important roles for GO-CPEs interactions. Among them, electrostatic interaction, π-π interaction, and cation-π bonding are dominant driving forces. By using a cationic P2, we have developed a sensitive homogeneous sensor for DNA and RNA detection with a detection limit of 50 pM DNA and RNA, which increased the sensitivity by 40-fold as compared to GO-free CPE-based sensors. This GO-assisted CPE sensing strategy is also generic and shows a high potential for biosensor designs based on aptamers, proteins, peptides, and other biological probes.

Scaling up an electrochemical signal with a catalytic hairpin assembly coupling nanocatalyst label for DNA detection

A new strategy for the electrochemical detection of DNA based on catalytic hairpin assembly combined with nanocatalyst label-based redox cycling reaction signal amplification. A superior detection limit of 0.3 aM toward DNA was achieved.

Adsorption of nucleobases on 2D transition-metal dichalcogenides and graphene sheet: a first principles density functional theory study

Adsorption of nucleobases A, T, G, C and U on transition-metal dichalcogenides such as MoS₂ and WS₂ is studied using PBE, DFT-D2 and vdW-DF methods.

Recent developments in carbon nanomaterial sensors

The structural diversity of carbon nanomaterials provides an array of unique electronic, magnetic and optical properties, which when combined with their robust chemistry and ease of manipulation, makes them attractive candidates for sensor applications. In this review recent developments in the use of carbon nanoparticles and nanostructures as sensors and biosensors are explored.

The graphene/nucleic acid nanobiointerface

In this critical review, we present the recent advances in the design and fabrication of graphene/nucleic acid nanobiointerfaces, as well as the fundamental understanding of their interfacial properties and various nanobiotechnological applications.

A novel graphene oxide amplified fluorescence anisotropy assay with improved accuracy and sensitivity

A novel and versatile graphene oxide (GO) amplified fluorescence anisotropy (FA) strategy with improved accuracy and sensitivity has been successfully developed.

Highly sensitive DNA detection using cascade amplification strategy based on hybridization chain reaction and enzyme-induced metallization

A novel highly sensitive colorimetric assay for DNA detection using cascade amplification strategy based on hybridization chain reaction and enzyme-induced metallization was established. The DNA modified superparamagnetic beads were demonstrated to capture and enrich the target DNA in the hybridization buffer or human plasma. The hybridization chain reaction and enzyme-induced silver metallization on the gold nanoparticles were used as cascade signal amplification for the detection of target DNA. The metalization of silver on the gold nanoparticles induced a significant color change from red to yellow until black depending on the concentration of the target DNA, which could be recognized by naked eyes. This method showed a good specificity for the target DNA detection, with the capabilty to discriminate single-base-pair mismatched DNA mutation (single nucleotide polymorphism). Meanwhile, this approach exhibited an excellent anti-interference capability with the convenience of the magentic seperation and washing, which enabled its usage in complex biological systems such as human blood plasma. As an added benefit, the utilization of hybridization chain reaction and enzyme-induced metallization improved detection sensitivity down to 10pM, which is about 100-fold lower than that of traditional unamplified homogeneous assays.

Influence of three anionic gemini surfactants with different chain lengths on the optical properties of a cationic polyfluorene

The effects of three sulfonate gemini surfactants with different hydrophobic chain lengths (8, 10, and 12 carbon atoms) on the optical properties of a fluorene-based conjugated cationic polymer poly{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]-fluorene-phenylene} bromide (PFP) dissolved in DMSO-water solutions (4% v/v) or water were investigated, respectively. When surfactants with PFP dissolved in DMSO-water solutions (4% v/v) are incubated, a decrease in photoluminescence (PL) intensity and a red shift of emission maxima are obtained at low surfactant concentrations. Intriguingly, two different Stern-Volmer constants (KSV1 and KSV2) are obtained and analyzed in detail for the first time. Further increase in the surfactant concentration enhanced PL intensity, and distinct blue shifts of both absorption and emission maxima are observed. Importantly, the turning point between the emission quenching and enhancement is closely related to the hydrophobic chain length: the longer the chain length, the earlier the turning point appears. Simulation studies provide strong evidence to explain these phenomena. Surface tension measurements show more insight on the interactions between PFP and surfactant. On the contrary, no emission quenching is obtained at low surfactant concentrations for PFP dissolved in water.