Differentiation of Tonsil-Tissue-Derived Mesenchymal Stem Cells Controlled by Surface-Functionalized Microspheres in PEG-Polypeptide Thermogels

Thermo-induced physically crosslinked polypeptide-based block copolymer hydrogels for biomedical applications

Stimuli-responsive synthetic polypeptide-containing block copolymers have received considerable attention in recent years. Especially, unique thermo-induced sol-gel phase transitions were observed for elaborately-designed amphiphilic diblock copolypeptides and a range of poly(ethylene glycol) (PEG)-polypeptide block copolymers. The thermo-induced gelation mechanisms involve the evolution of secondary conformation, enhanced intramolecular interactions, as well as reduced hydration and increased chain entanglement of PEG blocks. The physical parameters, including polymer concentrations, sol-gel transition temperatures and storage moduli, were investigated. The polypeptide hydrogels exhibited good biocompatibility in vitro and in vivo, and displayed biodegradation periods ranging from 1 to 5 weeks. The unique thermo-induced sol-gel phase transitions offer the feasibility of minimal-invasive injection of the precursor aqueous solutions into body, followed by in situ hydrogel formation driven by physiological temperature. These advantages make polypeptide hydrogels interesting candidates for diverse biomedical applications, especially as injectable scaffolds for 3D cell culture and tissue regeneration as well as depots for local drug delivery. This review focuses on recent advances in the design and preparation of injectable, thermo-induced physically crosslinked polypeptide hydrogels. The influence of composition, secondary structure and chirality of polypeptide segments on the physical properties and biodegradation of the hydrogels are emphasized. Moreover, the studies on biomedical applications of the hydrogels are intensively discussed. Finally, the major challenges in the further development of polypeptide hydrogels for practical applications are proposed.

Folic acid pretreatment and its sustained delivery for chondrogenic differentiation of MSCs

Dietary uptake of folic acid (FA) improves cartilage regeneration. In this work, we discovered that three days of FA treatment is highly effective for promoting chondrogenic differentiation of tonsil-derived mesenchymal stem cells (TMSCs). In a three-dimensional pellet culture, the levels of typical chondrogenic biomarkers, sulfated glycosaminoglycan, proteoglycan, type II collagen (COL II), SRY box transcription factor 9 (SOX 9), cartilage oligomeric matrix protein (COMP), and aggrecan (ACAN) increased significantly in proportion to FA concentration up to 30 μM. At the mRNA expression level, COL II, SOX 9, COMP, and ACAN increased 3.6-6.0-fold with FA treatment at 30 μM compared with the control system that did not receive FA treatment, and the levels with FA treatment were 1.6-2.5 times greater than those in the kartogenin-treated positive control system. FA treatment did not increase type I collagen α1 (COL I α1), an osteogenic biomarker which is a concern with most chondrogenic promoters. At the high FA concentration of 100 μM, significant decreases in chondrogenic biomarkers were observed, which might be related to DNA methylation. A thermogel system incorporating TMSCs and FA provided sustained release of FA over several days, similar to the FA treatment. The thermogel system confirmed the efficacy of FA in promoting chondrogenic promotion of TMSCs. The increased nuclear translocation of core-binding factor β subunit (CBFβ) and the runt-related transcription factor 1 (RUNX1) expression after FA treatment, together with molecular docking studies, suggest that the chondrogenic enhancement mechanism of FA is mediated by CBFβ and RUNX1.

PEG-based thermosensitive and biodegradable hydrogels

Injectable thermosensitive hydrogels are free-flowing polymer solutions at low or room temperature, making them easy to encapsulate the therapeutic payload or cells via simply mixing. Upon injection into the body, in situ forming hydrogels triggered by body temperature can act as drug-releasing reservoirs or cell-growing scaffolds. Finally, the hydrogels are eliminated from the administration sites after they accomplish their missions as depots or scaffolds. This review outlines the recent progress of poly(ethylene glycol) (PEG)-based biodegradable thermosensitive hydrogels, especially those composed of PEG-polyester copolymers, PEG-polypeptide copolymers and poly(organophosphazene)s. The material design, performance regulation, thermogelation and degradation mechanisms, and corresponding applications in the biomedical field are summarized and discussed. A perspective on the future thermosensitive hydrogels is also highlighted. STATEMENT OF SIGNIFICANCE: Thermosensitive hydrogels undergoing reversible sol-to-gel phase transitions in response to temperature variations are a class of promising biomaterials that can serve as minimally invasive injectable systems for various biomedical applications. Hydrophilic PEG is a main component in the design and fabrication of thermoresponsive hydrogels due to its excellent biocompatibility. By incorporating hydrophobic segments, such as polyesters and polypeptides, into PEG-based systems, biodegradable and thermosensitive hydrogels with adjustable properties in vitro and in vivo have been developed and have recently become a research hotspot of biomaterials. The summary and discussion on molecular design, performance regulation, thermogelation and degradation mechanisms, and biomedical applications of PEG-based thermosensitive hydrogels may offer a demonstration of blueprint for designing new thermogelling systems and expanding their application scope.

Intra-Articular Delivery of Quercetin Using Thermosensitive Hydrogel Attenuate Cartilage Degradation in an Osteoarthritis Rat Model

OBJECTIVE

Quercetin (Que), a bioflavonoid, is both anti-inflammatory and antioxidative. Que has been used as an oral supplement for osteoarthritis (OA) with inconsistent findings because of its low bioavailability. We encapsulated Que in a mPEG-polypeptide thermogel to prolong its bioactivity. The efficacy of this formulation was evaluated in a posttraumatic OA rat model.

DESIGN

Methoxy-poly(ethylene glycol)-l-poly(alanine) (mPEG-PA) polymer was synthesized and characterized in terms of cytotoxicity and release kinetics in vitro. At 12 weeks old, Sprague-Dawley rats underwent anterior cruciate ligament transection (ACLT). At 24 weeks post-operation, rats received either an intra-articular (IA) injection of saline, hydrogel, or hydrogel with Que (50 or 500 μg). Gait analysis was performed at pre-ACLT, pre-treatment, and at 4, 8, and 12 weeks post-treatment. At 12 weeks post-treatment, knee joints were collected for histopathological evaluation.

RESULTS

In vitro studies showed that chondrocytes were viable after 72 hours of incubation with mPEG-PA, and the release of Que could be sustained for >28 days. Among all OA rats, the limb idleness index (LII) were significantly increased at 24 weeks post-ACLT. Rats that received hydrogel with Que (50 μg) showed the most reduction in LII at both 4 and 8 weeks post-treatment. The Osteoarthritis Research Society International score of rats received hydrogel with Que (50 μg) was significantly lower than the control group. All rats suffered from low-grade synovitis (Krenn score: 2-4).

CONCLUSION

This study suggests that a sustained delivery of Que (50 μg) could provide symptom relief and also delay the progression of OA in the knee.

Thermogelling Inclusion Complex System for Fine-Tuned Osteochondral Differentiation of Mesenchymal Stem Cells

How to control osteochondral differentiation of mesenchymal stem cells at a proper stage is a key issue for articular cartilage regeneration. To solve this problem, injectable scaffolds with different chemical functional groups were designed by introducing one equivalent of α-cyclodextrin (α-CD) carboxylate and α-CD phosphate along poly(ethylene glycol)-poly(l-alanine) (PEG-L-PA) block copolymers. Dynamic light scattering, transmission electron microscopy images, and two-dimensional NMR spectra indicated that the PEG-L-PA block copolymers formed inclusion complexes with α-CD derivatives. Aqueous solutions of PEG-L-PA block copolymers (P), α-CD carboxylate/PEG-L-PA block copolymers (PCC), and α-CD phosphate/PEG-L-PA block copolymers (PCP) underwent sol-to-gel transition as the temperature increased. The storage moduli of P, PCC, and PCP gels ranged from 1000 to 1300 Pa at 37 °C. Tonsil-derived mesenchymal stem cells (TMSCs) were incorporated in situ in the gel during thermogelation of P, PCC, and PCP, which became the three-dimensional cell culture systems with different functional groups. After 21 days of incubation of TMSCs in the P, PCC, and PCP systems, the chondrogenic differentiation biomarker of type II collagen significantly increased in the P system, whereas the osteogenic biomarkers of osteocalcin and runt-related transcription factor 2 significantly increased in the PCP system. Both chondrogenic and osteogenic biomarkers were highly expressed in the PCC system. This study proved that thermogelling inclusion complex systems consisting of PEG-L-PA block copolymers and α-CD derivatives could be an excellent injectable matrix for fine-controlling osteochondral differentiation of mesenchymal stem cells.

Self-Assemblable Polymer Smart-Blocks for Temperature-Induced Injectable Hydrogel in Biomedical Applications

Self-assembled temperature-induced injectable hydrogels fabricated via self-assembly of polymer smart-blocks have been widely investigated as drug delivery systems and platforms for tissue regeneration. Polymer smart-blocks that can be self-assembly play an important role in fabrication of hydrogels because they can self-assemble to induce the gelation of their copolymer in aqueous solution. The self-assembly occurs in response to an external stimulus change, such as temperature, pH, glucose, ionic strength, light, magnetic field, electric field, or their combination, which results in property transformations like hydrophobicity, ionization, and conformational change. The self-assembly smart-block based copolymers exist as a solution in aqueous media at certain conditions that are suitable for mixing with bioactive molecules and/or cells. However, this solution turns into a hydrogel due to the self-assembly of the smart-blocks under exposure to an external stimulus change in vitro or injection into the living body for a controllable release of loaded bioactive molecules or serving as a biomaterial scaffold for tissue regeneration. This work reports current scenery in the development of these self-assembly smart-blocks for fabrication of temperature-induced injectable physically cross-linked hydrogels and their potential application as drug delivery systems and platforms for tissue engineering.

Ring opening polymerization of α-amino acids: advances in synthesis, architecture and applications of polypeptides and their hybrids

This review provides a comprehensive overview of the latest advances in the synthesis, architectural design and biomedical applications of polypeptides and their hybrids.

Tonsil-derived stem cells as a new source of adult stem cells

Located near the oropharynx, the tonsils are the primary mucosal immune organ. Tonsil tissue is a promising alternative source for the high-yield isolation of adult stem cells, and recent studies have reported the identification and isolation of tonsil-derived stem cells (T-SCs) from waste surgical tissue following tonsillectomies in relatively young donors (i.e., under 10 years old). As such, T-SCs offer several advantages, including superior proliferation and a shorter doubling time compared to bone marrow-derived mesenchymal stem cells (MSCs). T-SCs also exhibit multi-lineage differentiation, including mesodermal, endodermal (e.g., hepatocytes and parathyroid-like cells), and even ectodermal cells (e.g., Schwann cells). To this end, numbers of researchers have evaluated the practical use of T-SCs as an alternative source of autologous or allogenic MSCs. In this review, we summarize the details of T-SC isolation and identification and provide an overview of their application in cell therapy and regenerative medicine.

Polypeptide Thermogels as Three-Dimensional Scaffolds for Cells

BACKGROUND

Thermogel is an aqueous solution that exhibits a sol-to-gel transition as the temperature increases. Stem cells, growth factors, and differentiating factors can be incorporated in situ in the matrix during the sol-to-gel transition, leading to the formation of a three-dimensional (3D) cell-culture scaffold.

METHODS

The uses of thermogelling polypeptides, such as collagen, Matrigel™, elastin-like polypeptides, and synthetic polypeptides, as 3D scaffolds of cells, are summarized in this paper.

RESULTS

The timely supply of growth factors to the cells, cell survival, and metabolite removal is to be insured in the cell culture matrix. Various growth factors were incorporated in the matrix during the sol-to-gel transition of the thermogelling polypeptide aqueous solutions, and preferential differentiation of the incorporated stem cells into specific target cells were investigated. In addition, modulus of the matrix was controlled by post-crosslinking reactions of thermogels or employing composite systems. Chemical functional groups as well as biological factors were selected appropriately for targeted differentiation of the incorporated stem cells.

CONCLUSION

In addition to all the advantages of thermogels including mild conditions for cell-incorporation and controlled supplies of the growth factors, polypeptide thermogels provide neutral pH environments to the cells during the degradation of the gel. Polypeptide thermogels as an injectable scaffold can be a promising system for their eventual in vivo applications in stem cell therapy.

The Evolution of Polystyrene as a Cell Culture Material

Polystyrene (PS) has brought in vitro cell culture from its humble beginnings to the modern era, propelling dozens of research fields along the way. This review discusses the development of the material, fabrication, and treatment approaches to create the culture material. However, native PS surfaces poorly facilitate cell adhesion and growth in vitro. To overcome this, liquid surface deposition, energetic plasma activation, and emerging functionalization methods transform the surface chemistry. This review seeks to highlight the many potential applications of the first widely accepted polymer growth surface. Although the majority of in vitro research occurs on two-dimensional surfaces, the importance of three-dimensional (3D) culture models cannot be overlooked. The methods to transition PS to specialized 3D culture surfaces are also reviewed. Specifically, casting, electrospinning, 3D printing, and microcarrier approaches to shift PS to a 3D culture surface are highlighted. The breadth of applications of the material makes it impossible to highlight every use, but the aim remains to demonstrate the versatility and potential as both a general and custom cell culture surface. The review concludes with emerging scaffolding approaches and, based on the findings, presents our insights on the future steps for PS as a tissue culture platform.

Advances and Biomedical Applications of Polypeptide Hydrogels Derived from α-Amino Acid N-Carboxyanhydride (NCA) Polymerizations

Polypeptide hydrogels, having the ability to mimic certain properties of natural, native extracellular matrix components, are being actively designed and described for various applications in the construction of tissue engineering scaffolds, living cell encapsulation, and drug delivery systems. Compared to conventional hydrogels, polypeptide hydrogels possess biocompatibility, biodegradability, bioactivity, functional diversity, and structural advantage based on the unique secondary structures (α-helix and β-sheet). Furthermore, the progresses in functional N-carboxyanhydride polymerization combined with advanced orthogonal conjugation techniques significantly promote the development of the polypeptide materials. This progress report focuses on the recent advances in designing and engineering polypeptide hydrogels obtained from ring opening polymerization, highlighting the precise manipulation of their properties for biomedical applications.

Thermogelling 3D Systems towards Stem Cell-Based Tissue Regeneration Therapies

Stem cell culturing and differentiation is a very important research direction for tissue engineering. Thermogels are well suited for encapsulating cells because of their non-biotoxic nature and mild sol-gel transition as temperature increases. In particular, thermogels provide a 3D growth environment for stem cell growth, which is more similar to the extracellular matrix than flat substrates, so thermogels as a medium can overcome many of the cell abnormalities caused by 2D cell growth. In this review, we summarize the applications of thermogels in cell and stem cell culture in recent years. We also elaborate on the methods to induce stem cell differentiation by using thermogel-based 3D scaffolds. In particular, thermogels, encapsulating specific differentiation-inducing factor and having specific structures and moduli, can induce the differentiation into the desired tissue cells. Three dimensional thermogel scaffolds that control the growth and differentiation of cells will undoubtedly have a bright future in regenerative medicine.

Layered Double Hydroxide and Polypeptide Thermogel Nanocomposite System for Chondrogenic Differentiation of Stem Cells

Stem cell therapy for damaged cartilage suffers from low rates of retention, survival, and differentiation into chondrocytes at the target site. To solve these problems, here we propose a two-dimensional/three-dimensional (2D/3D) nanocomposite system. As a new two-dimensional (2D) material, hexagonal layered double hydroxides (LDHs) with a uniform lateral length of 2-3 μm were prepared by a hydrothermal process. Then, tonsil-derived mesenchymal stem cells (TMSCs), arginylglycylaspartic acid-coated LDHs, and kartogenin (KGN) were incorporated into the gel through the thermal-energy-driven gelation of the system. The cells exhibited a tendency to aggregate in the nanocomposite system. In particular, chondrogenic biomarkers of type II collagen and transcription factor SOX 9 significantly increased at both the mRNA and protein levels in the nanocomposite system, compared to the pure thermogel systems. The inorganic 2D materials increased the rigidity of the matrix, slowed down the release of a soluble factor (KGN), and improved cell-material interactions in the gel. The current 2D/3D nanocomposite system of bioactive LDH/thermogel can be a new platform material overcoming drawbacks of hydrogel-based 3D cell culture systems and is eventually expected to be applied as an injectable stem cell therapy.

Injectable Polypeptide Thermogel as a Tissue Engineering System for Hepatogenic Differentiation of Tonsil-Derived Mesenchymal Stem Cells

A poly(ethylene glycol)-b-poly(l-alanine) (PEG-l-PA) hydrogel incorporating tonsil-derived mesenchymal stem cells (TMSCs), tauroursodeoxycholic acid (TUDCA), hepatocyte growth factor (HGF), and fibroblast growth factor 4 (FGF4) was prepared through thermal gelation of an aqueous polymer solution for an injectable tissue engineering application. The thermal gelation accompanied conformational changes of both PA and PEG blocks. The gel modulus at 37 °C was controlled to be 1000 Pa by using a 14.0 wt % aqueous polymer solution. The gel preserved its physical integrity during the 3D culture of the cells. TUDCA, HGF, and FGF4 were released from the PEG-l-PA hydrogel over 21 days of the 3D cell culture period. TMSCs initially exhibited a spherical shape, whereas some fibers protruded from the cells on days 14-21 of 3D culture. The injectable system exhibited pronounced expressions of the hepatic biomarkers at both mRNA and protein levels, which are significantly better than the commercially available hyaluronic acid gel. In particular, the hepatogenically differentiated cells from the TMSCs in the injectable system demonstrated hepatic biofunctions comparable to HepG2 cells for the uptakes of low density lipoproteins (52%) and indocyanine green (76%), and the production of albumin (40%) and urea (52%), which are also significantly better than the 3D-cultured cells in the commercially available hyaluronic acid gel. Our studies suggest that the PEG-l-PA thermogel incorporating TMSCs, TUDCA, and growth factors is highly promising as an in situ forming tissue engineering system.

Multifunctional thermoresponsive designer peptide hydrogels

We report the synthesis and characterization of multifunctional peptides comprised of a hydrogel forming β-sheet peptide segment and a matrix metalloproteinase 2 substrate containing a propargylglycinyl linker that is further derivatized with an RGD peptide sequence via "click" chemistry. In contrast to currently known systems, these multifunctional peptides formed gels that are stiffer than those formed by their respective precursors. All the peptides showed reversible thermoresponsive properties, which render them as suitable lead systems for a variety of possible biomedical applications.

STATEMENT OF SIGNIFICANCE

In general, it has been frequently observed that chemical biofunctionalization of peptide hydrogels adversely affects peptide assembly, hydrogel formation or mechanical properties, which severely compromises their application. A functionalization protocol that allows to generate peptide hydrogels that display significantly improved mechanical properties over their unfunctionalized counterparts is reported in this work. These peptides also showed thermoresponsive viscoelastic characteristics, including an example of a peptide hydrogel that displays lower critical solution temperature behaviour.

Sustained subconjunctival delivery of cyclosporine A using thermogelling polymers for glaucoma filtration surgery

We successfully developed a subconjunctival delivery system of CsA using an injectable thermogel to inhibit post-surgical scar formation after glaucoma filtration surgery.

A review on the biocompatibility and potential applications of graphene in inducing cell differentiation and tissue regeneration

Advances in the biocompatibility and cell differentiation inducing capacity of graphene and its potential applications in multi-tissue regeneration.

Feasibility of injectable thermoreversible gels for use in intramuscular injection of parathyroid autotransplantation

Surgical transplantation of parathyroid tissue into the forearm muscle is one of the most commonly used surgical techniques. While simple, the procedure suffers from drawbacks. This study evaluated the feasibility of thermoreversible gel as an injectable carrier for parathyroid autotransplantation. Polyethyleneglycol-polyalanine-co-phenylalanine (PEG-PAF) thermoreversible gel (sol form at 4 °C, gel form at 37 °C) were manufactured. Thirty-eight Sprague-Dawley rats were divided into two groups (19 control, C group; 19 experimental, P group). The parathyroid glands of rats were excised. Parathyroid tissues were transplanted into the muscle pocket in sternocleidomastoid muscle in the C group. In the P group, the tissues were injected into the same muscle mixed with 0.3 ml thermoreversible gel. The serum levels of parathyroid hormone (PTH), ionized calcium, and phosphorous were measured before surgical procedure, on 7, 21, 56, and 70 days after surgery. Histology and immunohistochemistry were performed. Preoperative median PTH level of the C and the P group were 60.80 and 43.85 pg/ml, respectively (p = 0.641). Seventy days after surgery, median PTH level was 32.8 and 25.61 pg/ml, respectively. On day 70, the PTH level was restored by 54 % in the C group and 56 % in the P group compared to the preoperative value (p = 0.620). There were no significant intergroup differences in the ionized calcium/phosphorous level. Histology and immunohistochemistry revealed the successful transplantation of parathyroid tissues into the muscles in both groups. In conclusion, the PEG-PAF-based thermoreversible gel is a good candidate carrier material for intramuscular parathyroid autotransplantation.

Safe and Efficient Colonic Endoscopic Submucosal Dissection Using an Injectable Hydrogel

Endoscopic submucosal dissection (ESD) has not yet been widely adopted in the treatment of early colonic cancers due to the greater technical difficulty involved, longer procedure time, and the increased risk of perforation. Adequate mucosal elevation by submucosal injection is crucial for en bloc resection and prevention of perforation during colonic ESD. This study is aimed to evaluate the efficacy of an injectable thermoreversible hydrogel as the colonic submucosal agent for the first time. Triblock copolymer poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) was synthesized, and its concentrated aqueous solution was injected into the colonic submucosa of living minipig and spontaneously transformed into an in situ hydrogel with adequate mucosal elevation at body temperature. Such a mucosal lifting lasted for a longer time than that created by the control group, glycerol fructose. Colonic ESD was then performed with the administration of hydrogels at various polymer concentrations or glycerol fructose. All colonic lesions were successfully resected en bloc after one single injection of the hydrogel, and repeated injections were not needed. No evidence of major hemorrhage, perforation and tissue damage were observed. Considering the injection pressure, duration of mucosal elevation and efficacy of "autodissection", the hydrogel containing 15 wt % polymer was the optimized system for colonic ESD. Consequently, the thermoreversible hydrogel is an ideal submucosal fluid that provides a durable mucosal lifting and makes colonic ESD accessible to a large extent. In particular, the efficacy of "autodissection" after one single injection of the hydrogel simplifies significantly the procedures while minimizing the complications.

Thermoreversible and Injectable ABC Polypeptoid Hydrogels: Controlling the Hydrogel Properties through Molecular Design

A series of ABC triblock copolypeptoids [i.e., poly(N-allyl glycine)-b-poly(N-methyl glycine)-b-poly(N-decyl glycine) (AMD)] with well-defined structure and varying composition have been synthesized by sequential primary amine-initiated ring-opening polymerization of the corresponding N-substituted N-carboxyanhydride monomers (Al-NCA, Me-NCA, and De-NCA). The ABC block copolypeptoids undergo sol-to-gel transitions with increasing temperature in water and biological media at low concentrations (2.5-10 wt %). The sol-gel transition is rapid and fully reversible with a narrow transition window, evidenced by the rheological measurements. The gelation temperature (Tgel) and mechanical stiffness of the hydrogels are highly tunable: Tgel in the 26.2-60.0 °C range, the storage modulus (G') and Young's modulus (E) in the 0.2-780 Pa and 0.5-2346 Pa range, respectively, at the physiological temperature (37 °C) can be readily accessed by controlling the block copolypeptoid composition and the polymer solution concentration. The hydrogel is injectable through a 24 gauge syringe needle and maintains their shape upon in contact with surfaces or water baths that are kept above the sol-gel transition temperature. The hydrogels exhibit minimal cytotoxicity toward human adipose derived stem cells (hASCs), evidenced from both alamarBlue and PicoGreen assays. Furthermore, quantitative PCR analysis revealed significant up-regulation of the Col2a1 gene and down-regulation of ANGPT1 gene, suggesting that the hydrogel exhibit biological activity in inducing chondrogenesis of hASCs. It was also demonstrated that the hydrogel can be used to quantitatively encapsulate water-soluble enzymes (e.g., horseradish peroxidase) by manipulating the sol-gel transition. The enzymatic activity of HRP remain unperturbed after encapsulation at 37 °C for up to 7 d, suggesting that the hydrogel does not adversely affect the enzyme structure and thereby the enzymatic activity. These results suggest that the polypeptoid hydrogel a promising synthetic platform for tissue engineering or protein storage applications.

Low molecular weight gels induced differentiation of mesenchymal stem cells

Four low molecular weight gels (LMWGs) with different moduli were fabricated as scaffolds to investigate the differentiation of mesenchymal stem cells (MSCs).

Sustained intravitreal delivery of dexamethasone using an injectable and biodegradable thermogel

Delivery of therapeutic agents to posterior segment of the eyes is challenging due to the anatomy and physiology of ocular barriers and thus long-acting implantable formulations are much desired. In this study, a thermogelling system composed of two poly(lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) triblock copolymers was developed as an injectable matrix for intravitreal drug delivery. The thermogel was prepared by mixing a sol and a precipitate of PLGA-PEG-PLGA triblock copolymers with different block ratios, among which a hydrophobic glucocorticoid, dexamethasone (DEX), was incorporated. The DEX-loaded thermogel was a low-viscous liquid at low temperature and formed a non-flowing gel at body temperature. The in vitro release rate of DEX from the thermogel could be conveniently modulated by varying the mixing ratio of the two copolymers. The long-lasting intraocular residence of the thermogel was demonstrated by intravitreal injection of a fluorescence-labeled thermogel to rabbits. Compared with a DEX suspension, the intravitreal retention time of DEX increased from a dozen hours to over 1week when being loaded in the thermogel. Additionally, intravitreal administration of the thermogel did not impair the morphology of retina and cornea. This study reveals that the injectable PLGA-PEG-PLGA thermogel is a biocompatible carrier for sustained delivery of bioactive agents into the eyes, and provides an alternative approach for treatment of posterior segment diseases.

Selenium-containing thermogel for controlled drug delivery by coordination competition

A coordination-responsive selenium-containing thermogel was designed and synthesized for controlled cisplatin delivery by competitive coordination of glutathione, which broadens the strategy of tuning drug release using thermogelling systems.