Role of polymeric endosomolytic agents in gene transfection: a comparative study of poly(L-lysine) grafted with monomeric L-histidine analogue and poly(L-histidine)

Comparing Cell Penetration of Biotherapeutics across Human Cell Lines

A major obstacle in biotherapeutics development is maximizing cell penetration. Ideally, assays would allow for optimization of cell penetration in the cell type of interest early in the drug development process. However, few assays exist to compare cell penetration across different cell types independent of drug function. In this work, we applied the chloroalkane penetration assay (CAPA) in seven mammalian cell lines as well as primary cells. Careful controls were used to ensure that data could be compared across cell lines. We compared the nuclear penetration of several peptides and drug-like oligonucleotides and saw significant differences among the cell lines. To help explain these differences, we quantified the relative activities of endocytosis pathways in these cell lines and correlated them with the penetration data. Based on these results, we knocked down clathrin in a cell line with an efficient permeability profile and observed reduced penetration of peptides but not oligonucleotides. Finally, we used small-molecule endosomal escape enhancers and observed enhancement of cell penetration of some oligonucleotides, but only in some of the cell lines tested. CAPA data provide valuable points of comparison among different cell lines, including primary cells, for evaluating the cell penetration of various classes of peptides and oligonucleotides.

Recent Progress in the Endosomal Escape Mechanism and Chemical Structures of Polycations for Nucleic Acid Delivery

Nucleic acid-based therapies are seeing a spiralling surge. Stimuli-responsive polymers, especially pH-responsive ones, are gaining widespread attention because of their ability to efficiently deliver nucleic acids. These polymers can be synthesized and modified according to target requirements, such as delivery sites and the nature of nucleic acids. In this regard, the endosomal escape mechanism of polymer-nucleic acid complexes (polyplexes) remains a topic of considerable interest owing to various plausible escape mechanisms. This review describes current progress in the endosomal escape mechanism of polyplexes and state-of-the-art chemical designs for pH-responsive polymers. The importance is also discussed of the acid dissociation constant (i.e., pKa) in designing the new generation of pH-responsive polymers, along with assays to monitor and quantify the endosomal escape behavior. Further, the use of machine learning is addressed in pKa prediction and polymer design to find novel chemical structures for pH responsiveness. This review will facilitate the design of new pH-responsive polymers for advanced and efficient nucleic acid delivery.

Ratiometric, pH-Sensitive Probe for Monitoring siRNA Delivery

Many RNA delivery strategies require efficient endosomal uptake and release. To monitor this process, we developed a 2'-OMe RNA-based ratiometric pH probe with a pH-invariant 3'-Cy5 and 5'-FAM whose pH sensitivity is enhanced by proximal guanines. The probe, in duplex with a DNA complement, exhibits a 48.9-fold FAM fluorescence enhancement going from pH 4.5 to pH 8.0 and reports on both endosomal entrapment and release when delivered to HeLa cells. In complex with an antisense RNA complement, the probe constitutes an siRNA mimic capable of protein knockdown in HEK293T cells. This illustrates a general approach for measuring the localization and pH microenvironment of any oligonucleotide.

Amphiphilic Polypeptides Obtained by the Post-Polymerization Modification of Poly(Glutamic Acid) and Their Evaluation as Delivery Systems for Hydrophobic Drugs

Synthetic poly(amino acids) are a unique class of macromolecules imitating natural polypeptides and are widely considered as carriers for drug and gene delivery. In this work, we synthesized, characterized and studied the properties of amphiphilic copolymers obtained by the post-polymerization modification of poly(α,L-glutamic acid) with various hydrophobic and basic L-amino acids and D-glucosamine. The resulting glycopolypeptides were capable of forming nanoparticles that exhibited reduced macrophage uptake and were non-toxic to human lung epithelial cells (BEAS-2B). Moreover, the developed nanoparticles were suitable for loading hydrophobic cargo. In particular, paclitaxel nanoformulations had a size of 170-330 nm and demonstrated a high cytostatic efficacy against human lung adenocarcinoma (A549). In general, the obtained nanoparticles were comparable in terms of their characteristics and properties to those based on amphiphilic (glyco)polypeptides obtained by copolymerization methods.

Novel branched amphiphilic peptides for nucleic acids delivery

Highly efficient and safe non-viral vectors for nucleic acids delivery have attracted much attention due to their potential applications in gene therapy, gene editing and vaccination against infectious diseases, and various materials have been investigated and designed as delivery vectors. Herein, we designed a series of branched amphiphilic peptides (BAPs) and tested their applications as pDNA/mRNA delivery vectors. The BAP structure was inspired by the phospholipids, in which lysine oligomers were used as the "polar head", segments containing phenylalanine, histidine and leucine were used as the "hydrophobic tails", and a lysine residue was used as the branching point. By comparing the gel retardation, particle sizes and zeta potentials of the BAP/pDNA complexes of the short-branch BAPs (BAP-V1 ∼ BAP-V4), we determined the optimal lysine oligomer was K₆. However, their cell transfection efficiencies were not satisfactory, and thus three long-branch BAPs (BAP-V5 ∼ BAP-V7) were further designed. In these long-branch BAPs, more hydrophobic residues were added and the overall amphiphilicity increased accordingly. The results showed that these three BAPs could effectively compact the nucleic acids, including both pDNA and mRNA, and all could transfect nucleic acids into HEK 293 cells, with low cytotoxicity. Among the three long-branch BAPs, BAP-V7 (bis(FFLFFHHH)-K-K₆) showed the best transfection efficiency at N/P = 10, which was better than the commercial transfection reagent PEI-25 K. These results indicate that increased amphiphilicity would also benefit for BAP mediated nucleic acid delivery. The designed BAPs provide more documents of such novel type of nucleic acids delivery vectors, which is worth of further investigation as a new gene theranostic platforms.

Synthesis and Characterization of Poly (β-amino Ester) and Applied PEGylated and Non-PEGylated Poly (β-amino ester)/Plasmid DNA Nanoparticles for Efficient Gene Delivery

Polymer-based nanocarriers require extensive knowledge of their chemistries to learn functionalization strategies and understand the nature of interactions that they establish with biological entities. In this research, the poly (β-amino ester) (PβAE-447) was synthesized and characterized, aimed to identify the influence of some key parameters in the formulation process. Initially; PβAE-447 was characterized for aqueous solubility, swelling capacity, proton buffering ability, and cytotoxicity study before nanoparticles formulation. Interestingly, the polymer-supported higher cell viability than the Polyethylenimine (PEI) at 100 μg/ml. PβAE-447 complexed with GFP encoded plasmid DNA (pGFP) generated nanocarriers of 184 nm hydrodynamic radius (+7.42 mV Zeta potential) for cell transfection. Transfection assays performed with PEGylated and lyophilized PβAE-447/pDNA complexes on HEK-293, BEAS-2B, and A549 cell lines showed better transfection than PEI. The outcomes toward A549 cells (above 66%) showed the highest transfection efficiency compared to the other cell lines. Altogether, these results suggested that characterizing physicochemical properties pave the way to design a new generation of PβAE-447 for gene delivery.

Poly-L-Lysine/Hyaluronan Nanocarriers As a Novel Nanosystem for Gene Delivery

The present research comes up with a novel DNA-loaded poly-l-lysine (PLL) / hyaluronan (HA) nanocarrier (DNA-loaded PLL/HA NCs) for gene delivery applications, as a promising candidate for gene delivery into diverse cells. A straightforward approach was employed to prepare such a nanosystem through masking DNA-loaded PLL molecules by HA. Fourier-transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), field emission-scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) were used to analyze the interaction of the molecules as well as the physicochemical properties of the NCs. The NCs showed a negative charge of -24 ± 3 mV, with an average size of 138 ± 6 nm, in a ellipsoid-shape with smooth surfaces. The DNA loading efficiency (LE) measured by DNA absorbance was around 95 %. The MTT assay showed that the developed NCs are non-toxic to the cells. Furthermore,the uptake of the DNA-loaded PLL/HA NCs by the human embryonic kidney (HEK)-293T cells was evaluated by a flow cytometry method, and demonstrated high potential cellular uptake over 90% for transferring the gene to HEK-293T cells at the optimized conditions. Therefore, the DNA-loaded PLL/HA NCs are the potent strategy for developing nanosystems for gene delivery applications. This article is protected by copyright. All rights reserved.

Charge Conversion Polymer–Liposome Complexes to Overcome the Limitations of Cationic Liposomes in Mitochondrial-Targeting Drug Delivery

Mitochondrial-targeting therapy is considered an important strategy for cancer treatment. (3-Carboxypropyl) triphenyl phosphonium (CTPP) is one of the candidate molecules that can drive drugs or nanomedicines to target mitochondria via electrostatic interactions. However, the mitochondrial-targeting effectiveness of CTPP is low. Therefore, pH-sensitive polymer–liposome complexes with charge-conversion copolymers and CTPP-containing cationic liposomes were designed for efficiently delivering an anti-cancer agent, ceramide, into cancer cellular mitochondria. The charge-conversion copolymers, methoxypoly(ethylene glycol)-block-poly(methacrylic acid-g-histidine), were anionic and helped in absorbing and shielding the positive charges of cationic liposomes at pH 7.4. In contrast, charge-conversion copolymers became neutral in order to depart from cationic liposomes and induced endosomal escape for releasing cationic liposomes into cytosol at acidic endosomes. The experimental results reveal that these pH-sensitive polymer–liposome complexes could rapidly escape from MCF-7 cell endosomes and target MCF-7 mitochondria within 3 h, thereby leading to the generation of reactive oxygen species and cell apoptosis. These findings provide a promising solution for cationic liposomes in cancer mitochondrial-targeting drug delivery.

Self-Forming Double-Crosslinked Hydrogels by the Marriage of Catechols and Enzyme Mimetic Polymers

Self-forming double-crosslinked (DC) hydrogels were designed by incorporating enzyme-mimicking metal coordination polymer crosslinks and catechol chemistry. A macromolecular tris-histidine copper complex acted both as part of the hydrogel network and...

Systematic Investigation of Biocompatible Cationic Polymeric Nucleic Acid Carriers for Immunotherapy of Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) is the third-largest cause of cancer death worldwide, while immunotherapy is rapidly being developed to fight HCC with great potential. Nucleic acid drugs are the most important modulators in HCC immunotherapy. To boost the efficacy of therapeutics and amplify the efficiency of genetic materials, biocompatible polymers are commonly used. However, under the strong need of a summary for current developments of biocompatible polymeric nucleic acid carriers for immunotherapy of HCC, there is rare review article specific to this topic to our best knowledge. In this article, we will discuss the current progress of immunotherapy for HCC, biocompatible cationic polymers (BCPs) as nucleic acid carriers used (or potential) to fight HCC, the roles of biocompatible polymeric carriers for nucleic acid delivery, and nucleic acid delivery by biocompatible polymers for immunotherapy. At the end, we will conclude the review and discuss future perspectives. This article discusses biocompatible polymeric nucleic acid carriers for immunotherapy of HCC from multidiscipline perspectives and provides a new insight in this domain. We believe this review will be interesting to polymer chemists, pharmacists, clinic doctors, and PhD students in related disciplines.

Acylation of antimicrobial peptide-plasmid DNA vectors formulation for efficient gene delivery in cancer therapy

Antimicrobial peptides/DNA complexes were designed based on AMPs chensinin-1b and its corresponding lipo-chensinin-1b conjugated with an aliphatic acid with different chain lengths and therapeutic genes. The main goal of such a complex includes two aspects: first, antimicrobial peptides deliver therapeutic genes to cancer cells and genes expressed in targeted tissue for cancer gene therapy, and, second, the antimicrobial peptide kills cancer cells when used alone as an anticancer agent. This study presents a model composed of chensinin-1b and its lipo-chensinin-1b and eGFP plasmids, which were used as reporter genes, and the final peptide/eGFP plasmid complexes were analyzed by TEM and DLS. The gene transfection efficiency of the complex was evaluated by a microplate reader, FACS and CLSM. Compared with Lipo2000, the antimicrobial peptide showed specific selectivity for transfection against cancer cells and mammalian cells. The peptides chensinin-1b and lipo-chensinin-1b binding with the eGFP plasmid displayed optimal transfection efficiencies at a mass ratio of 8. In addition, PA-C1b can deliver p53-eGFP plasmids into MCF-7 cancer cells, and the proliferation of cells was inhibited and even caused cell death. Overall, PA-C1b was screened and found to have the highest transfection efficiency for gene delivery and good cellular uptake capability. The in vivo transfection ability of PA-C1b was investigated using a tumor-bearing mouse model, and the transfection efficiency reflected by the fluorescence of expressed GFP was determined by in vivo imaging. Conclusively, the antimicrobial peptide PA-C1b could be used as the nonviral vector with high efficiency for cancer gene therapy.

A review of the tortuous path of nonviral gene delivery and recent progress

Gene therapy encompasses the transfer of exogenous genetic materials into the patient's target cells to treat or prevent diseases. Nevertheless, the transfer of genetic material into desired cells is challenging and often requires specialized tools or delivery systems. For the past 40 years, scientists are mainly pursuing various viruses as gene delivery vectors, and the overall progress has been slow and far from the expectation. As an alternative, nonviral vectors have gained substantial attention due to their several advantages, including superior safety profile, enhanced payload capacity, and stealth abilities. Since nonviral vectors encounter multiple extra- and intra-cellular barriers limiting the transfer of genetic payload into the target cell nucleus, we have discussed these barriers in detail for this review. A direct approach, utilizing physical methods like electroporation, sonoporation, gene gun, eliminate the requirement for a specific carrier for gene delivery. In contrast, chemical methods of gene transfer exploit natural or synthetic compounds as carriers to increase cellular targeting and gene therapy effectiveness. We have also emphasized the recent advancements aimed at enhancing the current nonviral approaches. Therefore, in this review, we have focused on discussing the current evolving state of nonviral gene delivery systems and their future perspectives.

Poly(α-l-lysine)-based nanomaterials for versatile biomedical applications: Current advances and perspectives

Poly(α-l-lysine) (PLL) is a class of water-soluble, cationic biopolymer composed of α-l-lysine structural units. The previous decade witnessed tremendous progress in the synthesis and biomedical applications of PLL and its composites. PLL-based polymers and copolymers, till date, have been extensively explored in the contexts such as antibacterial agents, gene/drug/protein delivery systems, bio-sensing, bio-imaging, and tissue engineering. This review aims to summarize the recent advances in PLL-based nanomaterials in these biomedical fields over the last decade. The review first describes the synthesis of PLL and its derivatives, followed by the main text of their recent biomedical applications and translational studies. Finally, the challenges and perspectives of PLL-based nanomaterials in biomedical fields are addressed.

Development of a Rapid-Onset, Acid-Labile Linkage Polyplex-Mixed Micellar System for Anticancer Therapy

In the treatment of cancers, small interfering ribonucleic acids (siRNAs) are delivered into cells to inhibit the oncogenic protein’s expression; however, polyanions, hydrophilicity, and rapid degradations in blood, endosomal or secondary lysosomal degradation hamper clinal applications. In this study, we first synthesized and characterized two copolymers: methoxy poly(ethylene glycol)-b-poly(2-hydroxy methacrylate-ketal-pyridoxal) and methoxy poly(ethylene glycol)-b-poly(methacrylic acid-co-histidine). Afterwards, we assembled two polymers with the focal adhesion kinase (FAK) siRNA, forming polyplex-mixed micelles for the treatment of the human colon cancer cell line HCT116. In terms of the physiological condition, the cationic pyridoxal molecules that were conjugated on the copolymer with ketal bonds could electrostatically attract the siRNA. Additionally, the pyridoxal could form a hydrophobic core together with the hydrophobic deprotonated histidine molecules in the other copolymer and the hydrophilic polyethylene glycol (PEG) shell to protect the siRNA. In an acidic condition, the pyridoxal would be cleaved from the polymers due to the breakage of the ketal bonds and the histidine molecules can simultaneously be protonated, resulting in the endosome/lysosome escape effect. On the basis of our results, the two copolymers were successfully prepared and the pyridoxal derivatives were identified to be able to carry the siRNA and be cleavable by the copolymers in an acidic solution. Polyplex-mixed micelles were prepared, and the micellar structures were identified. The endosome escape behavior was observed using a confocal laser scanning microscopy (CLSM). The FAK expression was therefore reduced, and the cytotoxicity of siRNA toward human colon cancer cells was exhibited, rapidly in 24 h. This exceptional anticancer efficiency suggests the potential of the pH-sensitive polyplex-mixed micellar system in siRNA delivery.

Optimizing pDNA Lipo-polyplexes: A Balancing Act between Stability and Cargo Release

When optimizing nanocarriers, structural motifs that are beneficial for the respective type of cargo need to be identified. Here, succinoyl tetraethylene pentamine (Stp)-based lipo-oligoaminoamides (OAAs) were optimized for the delivery of plasmid DNA (pDNA). Structural variations comprised saturated fatty acids with chain lengths between C2 and C18 and terminal cysteines as units promoting nanoparticle stabilization, histidines for endosomal buffering, and disulfide building blocks for redox-sensitive release. Biophysical and tumor cell culture screening established clear-cut relationships between lipo-OAAs and characteristics of the formed pDNA complexes. Based on the optimized alternating Stp-histidine backbones, lipo-OAAs containing fatty acids with chain lengths around C6 to C10 displayed maximum gene transfer with around 500-fold higher gene expression than that of C18 lipo-OAA analogues. Promising lipo-OAAs, however, showed only moderate in vivo efficiency. In vitro testing in 90% full serum, revealing considerable inhibition of lytic and gene-transfer activity, was found as a new screening model predictive for intravenous applications in vivo.

Metabolite-Based Modification of Poly(l-lysine) for Improved Gene Delivery

Synthetic gene delivery systems employ multiple functions to enable safe and effective transport of DNA to target cells. Here, we describe metabolite-based poly(l-lysine) (PLL) modifiers that improve transfection by imparting both pH buffering and nanoparticle stabilization functions within a single molecular unit. PLL modifiers were based on morpholine (M), morpholine and niacin (MN), or thiomorpholine (TM). PLL modification with (MN) or (TM) imparted buffering function over the pH range of 5-7 both in solution and live cells and enhanced the stability of PLL DNA nanoparticles, which exhibited higher resistance to polyanion exchange and prolonged blood circulation. These properties translated into increased transfection efficiency in vitro coupled with reduced toxicity compared to unmodified PLL and PLL(M). Furthermore, PEG-PLL(MN) DNA nanoparticles transfected muscle tissue in vivo for >45 days following intramuscular injection. These polymer modifiers demonstrate the successful design of multifunctional units that improve transfection of synthetic gene delivery systems while maintaining biocompatibility.

Tumor-Oriented Telomerase-Terminated Nanoplatform as Versatile Strategy for Multidrug Resistance Reversal in Cancer Treatment

Multidrug resistance is one of the major problems in chemotherapy, and exploiting impactful targets to reverse drug resistance of most tumors remains a difficult problem. In this study, the tumor-oriented nanoparticle, BIBR1532-loaded peptide dendrimeric prodrug nanoassembly (B-PDPN), is used to assist telomerase inhibition for multidrug resistance reversal. B-PDPN possesses the characteristics of an acid-activated histidine to promote cellular uptake, a redox-sensitive poly(ethylene glycol) (PEG) layer to actualize endosomal escape and telomerase inhibitor release, and an acid sensitive chemical bond to facilitate chemotherapeutic drug release. Telomerase termination weakens the protective effect of hTERT protein on mitochondria and enhances reactive oxygen species (ROS) production, which increases DNA damage and apoptosis. The tumor-oriented nanoparticle B-PDPN achieves a broad-spectrum telomerase inhibition to combat multidrug resistance. In vivo experiments support the evidence that B-PDPN accumulates in the tumor site and reduces the expression of hTERT in tumor tissues to inhibit drug resistant tumor growth. This work introduces an innovative strategy of utilizing features of tumor-activated nanoplatform to assist telomerase termination. The nanoplatform enhances intracellular drug concentration and nucleus delivery of doxorubicin (DOX), and promotes DNA damage to combat multidrug resistance.

Cationic dynamic covalent polymers for gene transfection

Dynamic covalent polymers have revealed strong potential in gene delivery, thanks to their versatile self-assembly, adaptive and responsive behaviors.

Plasmid DNA Mono-Ion Complex for in Vivo Sustainable Gene Expression

To cleave biocompatible poly(ethylene glycol) (PEG) from the mono-ion complex (MIC) for sustainable cellular uptake in vivo, ω-amide-pentylimidazolium end-modified PEG with an ester bond, that is, APe-Im-E-PEG, has been synthesized. The hydrolysis of the resulting APe-Im-E-PEG proceeded during the incubation for 2 weeks under physiological conditions, which was confirmed by gel filtration chromatography. APe-Im-E-PEG formed the MIC with plasmid DNA (pDNA), assessed by agarose gel retardation assay. Furthermore, dynamic light scattering measurement and transmission electron microscopy observations have estimated that the particle size of the resulting MIC was approximately 30 nm, with a rather flexible structure. The APe-Im-E-PEG/pDNA MIC incubated for 2 weeks exhibited hemolytic activity at endosomal pH, presumably because the pH-sensitive carboxyl groups revealed after the hydrolysis of an ester bond of APe-Im-E-PEG. The APe-Im-E-PEG/pDNA MIC enhanced the gene expression 2 weeks after transfection in vivo by intramuscular administration in mice. Consequently, in vivo sustainable gene expression has been achieved by the molecular design of APe-Im-E-PEG for cellular uptake and endosomal escape proceeded by temporal hydrolysis of the ester bond.

A Gemini Cationic Lipid with Histidine Residues as a Novel Lipid-Based Gene Nanocarrier: A Biophysical and Biochemical Study

This work reports the synthesis of a novel gemini cationic lipid that incorporates two histidine-type head groups (C₃(C16His)₂). Mixed with a helper lipid 1,2-dioleoyl-sn-glycero-3-phosphatidyl ethanol amine (DOPE), it was used to transfect three different types of plasmid DNA: one encoding the green fluorescence protein (pEGFP-C3), one encoding a luciferase (pCMV-Luc), and a therapeutic anti-tumoral agent encoding interleukin-12 (pCMV-IL12). Complementary biophysical experiments (zeta potential, gel electrophoresis, small-angle X-ray scattering (SAXS), and fluorescence anisotropy) and biological studies (FACS, luminometry, and cytotoxicity) of these C₃(C16His)₂/DOPE-pDNA lipoplexes provided vast insight into their outcomes as gene carriers. They were found to efficiently compact and protect pDNA against DNase I degradation by forming nanoaggregates of 120⁻290 nm in size, which were further characterized as very fluidic lamellar structures based in a sandwich-type phase, with alternating layers of mixed lipids and an aqueous monolayer where the pDNA and counterions are located. The optimum formulations of these nanoaggregates were able to transfect the pDNAs into COS-7 and HeLa cells with high cell viability, comparable or superior to that of the standard Lipo2000*. The vast amount of information collected from the in vitro studies points to this histidine-based lipid nanocarrier as a potentially interesting candidate for future in vivo studies investigating specific gene therapies.

Cascade Cytosol Delivery of Dual-Sensitive Micelle-Tailored Vaccine for Enhancing Cancer Immunotherapy

Enhancing cytosol delivery of exogenous antigens in antigen presenting cells can improve cross-presentation and CD8+ T cell-mediated immune response. The antigen cytosol delivery speed, which has great importance on the rate of MHC class I molecules (MHC I) antigen presentation pathway and cytotoxic T lymphocytes (CTLs) induction, has not been well studied. We hypothesized that micelle-tailored vaccine with multiple cascaded lysosomal responsive capabilities could accelerate lysosomal escape and enhance cancer immunotherapy. To test our hypothesis, we created a novel micellar cancer vaccine (ovalbumin-loaded pH/redox dual-sensitive micellar vaccine, OLM-D) by cleavable conjugation of an antigen with house-made amphiphilic poly(l-histidine)-poly(ethylene glycol) (PLH-PEG) in current study. OLM-D was supposed to achieve cascade cytosol delivery of ovalbumin through three steps in terms of (i) initial redox triggered ovalbumin release, (ii) promoted proton inflow and micelle disassembly, and (iii) speeded proton sponge effect and lysosome bulging/broke. Redox-sensitive antigen release and consequently accelerative OLM-D disassembly were confirmed by sodium dodecylsulphate polyacrylamide gel electrophoresis (SDS-PAGE), transmission electronic microscopy (TEM), particle sizes, zeta potentials, and in vitro Ova release evaluation. The speeded cytosol delivery of ovalbumin was visualized under a confocal laser scanning microscope (CLSM). The ability of OLM-D to increase the MHC I molecule combination rate and antigen cross-presentation efficiency was identified by antigen presentation assay and maturation assay in bone marrow-derived dendritic cells (BMDCs). In vivo, the capability of OLM-D to accumulate in draining lymph nodes (LNs) after injection was visualized by real-time near infrared fluorescence imaging (NIRF) and the distribution order in different LNs was first observed (a, d, c, b). Enhanced cancer immunity of OLM-D was confirmed by increased CD3+CD8+ T cell quantity, CD3+CD8+25D11.6+ T cells quantity, and IFN-γ, IL-2 secretion post subcutaneous or intraperitoneal injection ( p < 0.05). Taken together, our results indicated that OLM-D provided a promising cascade cytosol delivery strategy, which held great potential to guide further design of nano-particulate cancer vaccines for efficient cancer immunotherapy.

Cellular Uptake of Nanoparticles versus Small Molecules: A Matter of Size

The primary function of the cell membrane is to protect cells from their surroundings. This entails a strict regulation on controlling the exchange of matter between the cell and its environment. A key factor when considering potential biological applications of a particular chemical structure has to do with its ability to internalize into cells. Molecules that can readily cross cell membranes are frequently needed in biological research and medicine, since most therapeutic entities are designed to modulate intracellular components. However, the design of molecules that do not penetrate cells is also relevant toward, for example, extracellular contrast agents, which are most widely used in clinical diagnosis. Small molecules have occupied the forefront of biomedical research until recently, but the past few decades have seen an increasing use of larger chemical structures, such as proteins or nanoparticles, leading to unprecedented and often unexpectedly novel research. Great achievements have been made toward understanding the rules that govern cellular uptake, which show that cell internalization of molecules is largely affected by their size. For example, macromolecules such as proteins and nucleic acids are usually unable to internalize cells. Intriguingly, in the case of nanoparticles, larger sizes seem to facilitate internalization via endocytic pathways, through which the particles remain trapped in lysosomes and endosomes. In this Account, we aimed at presenting our personal view of how different chemical structures behave in terms of cell internalization due to their size, ranging from small drugs to large nanoparticles. We first introduce the properties of cell membranes and the main mechanisms involved in cellular uptake. We then discuss the cellular internalization of molecules, distinguishing between those with molecular weights below 1 kDa and biological macromolecules such as proteins and nucleic acids. In the last section, we review the biological behavior of nanoparticles, with a special emphasis on plasmonic nanoparticles, which feature a high potential in the biomedical field. For each group of chemical structures, we discuss the parameters affecting their cellular internalization but also strategies that can be applied to achieve the desired intracellular delivery. Particular attention is paid to approaches that allow conditional regulation of the cell internalization process using external triggers, such as activable cell penetrating peptides, due to the impact that these systems may have in drug delivery and sensing applications. The Account ends with a "Conclusions and Outlook" section, where general lessons and future directions toward further advancements are briefly presented.

Combinatorial library of chalcogen-containing lipidoids for intracellular delivery of genome-editing proteins

Protein based therapeutics with high specificities and low off-target effects are used for transient and accurate manipulation of cell functions. However, developing safe and efficient carriers for intracellular delivery of active therapeutic proteins is a long-standing challenge. Here we report a combinatorial library of chalcogen (O, S, Se) containing lipidoid nanoparticles (LNPs) as efficient nanocarriers for intracellular delivery of negatively supercharged Cre recombinase ((-30)GFP-Cre) and anionic Cas9:single-guide RNA (Cas9:sgRNA) ribonucleoprotein (RNP) for genome editing. The structure-activity relationship between the lipidoids and intracellular protein delivery efficiencies was explored and it was demonstrated that the newly developed LNPs are effective for gene recombination in vivo.

Block Copolymer Micelles in Nanomedicine Applications

Polymeric micelles are demonstrating high potential as nanomedicines capable of controlling the distribution and function of loaded bioactive agents in the body, effectively overcoming biological barriers, and various formulations are engaged in intensive preclinical and clinical testing. This Review focuses on polymeric micelles assembled through multimolecular interactions between block copolymers and the loaded drugs, proteins, or nucleic acids as translationable nanomedicines. The aspects involved in the design of successful micellar carriers are described in detail on the basis of the type of polymer/payload interaction, as well as the interplay of micelles with the biological interface, emphasizing on the chemistry and engineering of the block copolymers. By shaping these features, polymeric micelles have been propitious for delivering a wide range of therapeutics through effective sensing of targets in the body and adjustment of their properties in response to particular stimuli, modulating the activity of the loaded drugs at the targeted sites, even at the subcellular level. Finally, the future perspectives and imminent challenges for polymeric micelles as nanomedicines are discussed, anticipating to spur further innovations.

Enhanced gene transfection efficiency by use of peptide vectors containing laminin receptor-targeting sequence YIGSR

This study presents the design and evaluation of a series of multifunctional peptides and their gene delivery abilities. The peptide sequences contained a cell-penetrating segment, six continuous histidine residues, a stearyl moiety and a laminin receptor-targeting segment. The YIGSR segment promoted cellular uptake through the interaction with laminin receptors on the surface of cells, which resulted in a great improvement in gene transfection efficiency. The conformation, particle size and zeta potential of peptide/DNA complexes were characterized via circular dichroism and dynamic light scattering. Their gene transfection efficiency was investigated by fluorescence-activated cell sorting and confocal microscopy. The transfection efficiency of the designed peptide vectors was higher than that of Lipo 2000. The peptide TAT-H₆-K(C₁₈)-YIGSR displayed transfection efficiencies at N/P ratios of 6, which was 3.5 and 7 times higher than that of Lipo 2000 in B16F10 and 293T cells, respectively. All peptides exhibited lower cytotoxicity than Lipo 2000 in B16F10 and 293T cells. In summary, the designed YIGSR-containing multifunctional peptide gene vectors promoted cellular uptake and gene transfection. Their in vivo transfection ability was investigated in zebrafish, and the transfection efficiency was determined by confocal microscopy and bioluminescence imaging. The peptide vectors, owing to their relatively short sequences and ease of functionalization, offer a promising approach for gene delivery because of their low cytotoxicity and high transfection efficiency.

The structure and configuration changes of multifunctional peptide vectors enhance gene delivery efficiency

We designed a series of peptide vectors that contain functional fragments with the goal of enhancing cellular internalization and gene transfection efficiency. The functional fragments included a cell-penetrating peptide (R₉), a cationic amphiphilic α-helical peptide [(LLKK)₃-H₆ or (LLHH)₃], a stearyl moiety, and cysteine residues. Vectors were also synthesized with D-type amino acids to improve their proteolytic stability. The conformations, particle sizes, and zeta potentials for complexes of these peptides with pGL3 plasmid DNA were characterized by circular dichroism and dynamic light scattering. In addition, cellular uptake of the peptide/DNA complexes and gene transfection efficiency were investigated with fluorescence-activated cell sorting and confocal laser-scanning microscopy. Greater transfection efficiency was achieved with the vectors containing the R₉ segment, and the efficiency was greater than Lipo2000. In addition, the D-type C₁₈-c(llkk)₃ch₆-r₉ had about 7 times and 5.5 times the transfection efficiency of Lipo2000 in 293T cells and NIH-3T3 cells at the N/P ratio of 6, respectively. Overall, the multifunctional peptide gene vectors containing the R₉ segment exhibited enhanced cellular internalization, a high gene transfection efficiency, and low cytotoxicity.

The R₉ containing peptide vectors can improve the gene transfection efficiency.

Poly-histidine grafting leading to fishbone-like architectures

A small series of Morita–Baylis–Hillman derivatives was synthesized and made to react with N-acetylhexahistidine to give polymeric materials characterized by the presence of biadduct residues.

Biodegradable Poly(Amino Ester) with Aromatic Backbone as Efficient Nonviral Gene Delivery Vectors

The development of gene delivery vectors with high efficiency and biocompatibility is one of the critical points of gene therapy. Two biodegradable poly(amino ester)s were synthesized via ring-opening polymerization between low molecular weight (LMW) PEI and diepoxide. The molecular weights of poly(amino ester)s were measured by GPC. Agarose gel retardation assays showed that these materials have good DNA-binding ability and can retard the electrophoretic mobility of plasmid DNA (pDNA) at a weight ratio of 1. The formed polyplexes have proper sizes of around 200 nm and zeta-potential values of about 30-40 mV for cellular uptake. In vitro experiments revealed that polymer P2 gave higher transfection efficiency than PEI 25KDa and Lipofectamine 2000 with less toxicity, especially in 293 cells. Results demonstrate that such a type of degradable poly(amino ester) may serve as a promising non-viral gene vector.

pH and reduction dual-responsive dipeptide cationic lipids with α-tocopherol hydrophobic tail for efficient gene delivery

A series of tocopherol-based cationic lipid 3a-3f bearing a pH-sensitive imidazole moiety in the dipeptide headgroup and a reduction-responsive disulfide linkage were designed and synthesized. Acid-base titration of these lipids showed good buffering capacities. The liposomes formed from 3 and co-lipid 1, 2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) could efficiently bind and condense DNA into nanoparticles. Gel binding and HPLC assays confirmed the encapsulated DNA could release from lipoplexes 3 upon addition of 10 mM glutathione (GSH). MTT assays in HEK 293 cells demonstrated that lipoplexes 3 had low cytotoxicity. The in vitro gene transfection studies showed cationic dipeptide headgroups clearly affected the transfection efficiency (TE), and arginine-histidine based dipeptide lipid 3f give the best TE, which was 30.4 times higher than Lipofectamine 3000 in the presence of 10% serum. Cell-uptake assays indicated that basic amino acid containing dipeptide cationic lipids exhibited more efficient cell uptake than serine and aromatic amino acids based dipeptide lipids. Confocal laser scanning microscopy (CLSM) studies corroborated that 3 could efficiently deliver and release DNA into the nuclei of HeLa cells. These results suggest that tocopherol-based dipeptide cationic lipids with pH and reduction dual-sensitive characteristics might be promising non-viral gene delivery vectors.

Histidine-enriched multifunctional peptide vectors with enhanced cellular uptake and endosomal escape for gene delivery

Peptide vectors offer a promising gene delivery approach because of their biocompatibility and ease of functionalization. This article describes the design and evaluation of a series of multifunctional peptides and their gene delivery abilities. The peptides were composed of a cell-penetrating segment, stearyl moiety, cationic amphiphilic α-helical segment, and cysteine and histidine residues. The proton sponge effect of histidine residues at low pH and the α-helical conformation should improve endosomal escape. Inclusion of d-type amino acids should improve proteolytic stability. The conformation, particle size and zeta potential of peptide/DNA complexes were characterized by circular dichroism and dynamic light scattering. Gene transfection efficiency was investigated by fluorescence-activated cell sorting and confocal microscopy. Transfection efficiencies of the designed peptide vectors were better than those of C₁₈-C(LLKK)₃C-TAT and Lipo2000. d-Type peptide C₁₈-c(llhh)₃c-tat showed three times higher transfection efficiency at N/P ratios of 6 and 8 than Lipo2000 in NIH-3T3 and 293T cells. All peptides showed lower cytotoxicity than Lipo2000 in NIH-3T3 and 293T cells. In the presence of trypsin or serum in vitro, d-type peptides showed better stability than l-type peptides. Overall, the designed histidine-enriched multifunctional peptide gene vectors promoted cellular uptake, endosomal escape and gene transfection.

Recent progress in gene therapy to deliver nucleic acids with multivalent cationic vectors

Due to the potential use as transfecting agents of nucleic acids (DNA or RNA), multivalent cationic non-viral vectors have received special attention in the last decade. Much effort has been addressed to synthesize more efficient and biocompatible gene vectors able to transport nucleic acids into the cells without provoking an immune response. Among them, the mostly explored to compact and transfect nucleic acids are: (a) gemini and multivalent cationic lipids, mixed with a helper lipid, by forming lipoplexes; and (b) cationic polymers, polycations, and polyrotaxanes, by forming polyplexes. This review is focused on the progress and recent advances experimented in this area, mainly during the present decade, devoting special attention to the lipoplexes and polyplexes, as follows: (a) to its biophysical characterization (mainly electrostatics, structure, size and morphology) using a wide variety of experimental methods; and (b) to its biological activity (transfection efficacy and cytotoxicity) addressed to confirm the optimum formulations and viability of these complexes as very promising gene vectors of nucleic acids in nanomedicine.

Smart Nanotransformers with Unique Enzyme-Inducible Structural Changes and Drug Release Properties

We previously reported a high aspect ratio peptide nanofiber that could be effectively delivered to tumors with minimal nonspecific uptake by other organs. The peptidic nature offers the design flexibility of smart formulation with unique responsiveness. Two new formulations that behave congruously as nanotransformers (NTFs) are reported herein. NTF1 and NTF2 could biomechanically remodel upon enzyme activation to generate a degradable and an aggregable effect, respectively, within the lysosomal compartment. These NTFs were further evaluated as carriers of mertansine (DM1), a microtubule inhibitor. DM1-loaded NTF1 could be degraded by cathepsin B (CathB) to release the same active metabolite, as previously described in the lysosomal degradation of antibody-DM1 conjugate. In contrast, CathB only partially digested DM1-loaded NTF2 and induced aggregate formation to become a storage reservoir with slow payload release property. The DM1-loaded NTF1 exhibited a comparable cytotoxicity to the free drug and was more effective than the NTF2 formulation in eradicating triple negative breast cancer. Our data suggested that biological transformers with distinct enzyme-induced structural changes and payload release profiles could be designed for the intracellular delivery of cytotoxic and imaging agents.

Dual functionalized amino poly(glycerol methacrylate) with guanidine and Schiff-base linked imidazole for enhanced gene transfection and minimized cytotoxicity

Guanidine and Schiff-base linked imidazole dual functionalized poly(glycerol methacrylate) (IGEP) leads to minimized cytotoxicity and better transfection efficacy than PEI_25K.