PCL-PEG-based nanoparticles grafted with GRGDS peptide: preparation and surface analysis by XPS

Deep eutectic solvent-based blended membranes for ultra-super selective separation of SO2

SO2 is a major atmospheric pollutant leading to acid rain and smog. As a new generation of green solvents, deep eutectic solvents (DESs) have been widely investigated for gas capture. Nevertheless, studies on DES-based membranes for SO2 separation are yet minimal. Herein, we devised polymer/DES blended membranes comprising 1-butyl-3-methyl-imidazolium bromide ([Bmim]Br)/diethylene glycol (DEG) DES and poly (vinylidene fluoride) (PVDF), and these membranes were firstly used for selective separation of SO2 from N2 and CO2. The permeability of SO2 reaches up to 17480 Barrer (0.20 bar, 40 ºC) in PVDF/DES blended membrane containing 50 wt% of [Bmim]Br/DEG (2:1), with ultrahigh SO2/N2 and SO2/CO2 selectivity of 3690 and 211 obtained, respectively, far exceeding those in the state-of-the-art membranes reported in literature. The highly-reversible multi-site interaction between SO2 and [Bmim]Br/DEG DES was revealed by spectroscopic analysis. Furthermore, the PVDF/DES blended membrane was also able to efficiently and stably separate SO2/CO2/N2 (2.5/15/82.5%) mixed gas for at least 100 h. This work demonstrates for the first time that [Bmim]Br-based DESs are very efficient media for membrane separation of SO2. The easy preparation, low cost and high performance enable polymer/DES blended membranes to be promising candidates for flue gas desulfurization.

PLGA-Based Composites for Various Biomedical Applications

Polymeric materials have been extensively explored in the field of nanomedicine; within them, poly lactic-co-glycolic acid (PLGA) holds a prominent position in micro- and nanotechnology due to its biocompatibility and controllable biodegradability. In this review we focus on the combination of PLGA with different inorganic nanomaterials in the form of nanocomposites to overcome the polymer’s limitations and extend its field of applications. We discuss their physicochemical properties and a variety of well-established synthesis methods for the preparation of different PLGA-based materials. Recent progress in the design and biomedical applications of PLGA-based materials are thoroughly discussed to provide a framework for future research.

Protein- and Cell-Resistance of Zwitterionic Peptide-Based Self-Assembled Monolayers: Anti-Biofouling Tests and Surface Force Analysis

Peptide-based self-assembled monolayers (peptide-SAMs) with specific zwitterionic amino acid sequences express an anti-biofouling property. In this work, we performed protein adsorption and cell adhesion tests using peptide-SAMs with repeating units of various zwitterionic pairs of amino acids (EK, DK, ER, and DR). The SAMs with the repeating units of EK and DK (EK and DK SAMs) manifested excellent bioinertness, whereas the SAMs with the repeating units of ER and DR (ER and DR SAMs) adhered proteins and cells. We also performed surface force measurements using atomic force microscopy to elucidate the mechanism underlying the difference in the anti-biofouling property. Our measurements revealed that water-induced repulsion with a range of about 8 nm acts between EK SAMs (immobilized on both probe and substrate) and DK SAMs, whereas such repulsion was not observed for ER and DR SAMs. The strength of the repulsion exhibited a clear correlation with the protein- and cell-resistance of the SAMs, indicating that the interfacial water in the vicinity of EK and DK SAMs is considered as a physical barrier to deter protein and cells from their adsorption or adhesion. The range of the repulsion observed for EK and DK SAMs is longer than 8 nm, indicating that the hydrogen bonding state of the interfacial water with a thickness of 4 nm is modified by EK and DK SAMs, resulting in the expression of the anti-biofouling property.

Versatility of unsaturated polyesters from electrospun macrolactones: RGD immobilization to increase cell attachment

Poly(globalide) (PGl), an aliphatic polyester derived from unsaturated macrocylic lactone, can be cross-linked during electrospinning and drug-loaded for regenerative medicine applications. However, it lacks intrinsic recognition sites for cell adhesion and proliferation. In order to improve their cell adhesiveness, and therefore their therapeutic potential, we aimed to functionalize electrospun PGl fibers with RGD sequence generating a biomimetic scaffold. First, an amine compound was attached to the surface double bonds of the PGl fibers. Subsequently, the amino groups were coupled with RGD sequences. X-ray photoelectron spectroscopy (XPS) analysis confirmed the functionalization. The obtained fibers were more hydrophilic, as observed by contact angle analysis, and presented smaller Young's modulus, although similar tensile strength compared with non-functionalized cross-linked fibers. In addition, the functionalization process did not significantly alter fibers morphology, as observed by scanning electron microscopy (SEM). Finally, in vitro analysis evidenced the increase in human mesenchymal stromal cells (hMSC) adhesion (9.88 times higher DNA content after 1 day of culture) and proliferation (3.57 times higher DNA content after 8 days of culture) compared with non-functionalized non-cross-linked fibers. This is the first report demonstrating the functionalization of PGl fibers with RGD sequence, improving PGl therapeutic potential and further corroborating the use of this highly versatile material toward regenerative medicine applications.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Paclitaxel-loaded multifunctional nanoparticles for the targeted treatment of glioblastoma

INTRODUCTION

We hypothesised that the active targeting of αvβ3 integrin overexpressed in neoangiogenic blood vessels and glioblastoma (GBM) cells combined with magnetic targeting of paclitaxel- and SPIO-loaded PLGA-based nanoparticles could improve accumulation of nanoparticles in the tumour and therefore improve the treatment of GBM.

METHODS

PTX/SPIO PLGA nanoparticles with or without RGD-grafting were characterised. Their in vitro cellular uptake and cytotoxicity was evaluated by fluorospectroscopy and MTT assay. In vivo safety and anti-tumour efficacy of different targeting strategies were evaluated in orthotopic U87MG tumour model over multiple intravenous injections.

RESULTS

The nanoparticles of 250 nm were negatively charged. RGD targeted nanoparticles showed a specific and higher cellular uptake than untargeted nanoparticles by activated U87MG and HUVEC cells. In vitro IC50 of PTX after 48 h was ∼1 ng/mL for all the PTX-loaded nanoparticles. The median survival time of the mice treated with magnetic targeted nanoparticles was higher than the control (saline) mice or mice treated with other evaluated strategies. The 6 doses of PTX did not induce any detectable toxic effects on liver, kidney and heart when compared to Taxol.

CONCLUSION

The magnetic targeting strategy resulted in a better therapeutic effect than the other targeting strategies (passive, active).

Mucus and Cell-Penetrating Nanoparticles Embedded in Nano-into-Micro Formulations for Pulmonary Delivery of Ivacaftor in Patients with Cystic Fibrosis

Here, mucus-penetrating nanoparticles (NPs) for pulmonary administration of ivacaftor in patients with cystic fibrosis (CF) were produced with the dual aim of enhancing ivacaftor delivery to the airway epithelial cells, by rapid diffusion through the mucus barrier, and at the same time, promoting ivacaftor lung cellular uptake. Pegylated and Tat-decorated fluorescent nanoparticles (FNPs) were produced by nanoprecipitation, starting from two synthetic copolymers, and showed nanometric sizes (∼70 nm), a slightly negative ζ potential, and high cytocompatibility toward human bronchial epithelium cells. After having showed the significant presence of poly(ethylene glycol) chains and Tat protein onto the FNP surface, the FNP mucus-penetrating ability, ivacaftor release profile, and lung cellular uptake were studied in the presence of CF-artificial mucus as a function of the FNP surface chemical composition. Moreover, microparticle-based pulmonary drug-delivery systems composed of mucus-penetrating FNPs loaded with ivacaftor and mannitol were prepared by using the nano-into-micro strategy and realized by spray-drying, thereby providing optimal preservation and stabilization of FNP technological and fluorescence properties.

Location of Varying Hydrophobicity Zinc(II) Phthalocyanine-Type Photosensitizers in Methoxy Poly(ethylene oxide) and Poly(l-lactide) Block Copolymer Micelles Using 1H NMR and XPS Techniques

Hydrophobic zinc(II) phthalocyanine-type derivatives, solubilized in polymeric micelles (PMs), provide a befitting group of so-called nanophotosensitizers, suitable for a variety of photodynamic therapy (PDT) protocols. The factors that influence the success of such products in PDT are the location of the active cargo in the PMs and the nanocarrier-enhanced ability to safely interact with biological systems and fulfill their therapeutic functions. Therefore, the aim of this work was to determine the solubilization loci of three phthalocyanines of varying hydrophobicity, i.e., zinc(II) phthalocyanine (ZnPc), along with its tetrasulfonic acid (ZnPc-sulfo₄) and perfluorinated (ZnPcF₁₆) derivatives, loaded in polymeric micelles of methoxy poly(ethylene oxide)-b-poly(l-lactide) (mPEG-b-PLLA), by means of ¹H nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) combined with ion sputtering. Furthermore, the microenvironment influence upon the chemical and physical status of the solubilized cargo in PMs, expressed by photobleaching and reactive oxygen species (ROS) generation comparing to the same properties of native cargoes in solution, was also evaluated and discussed in regards to the probing location data. The studied phthalocyanine-loaded PMs exhibited good physical stability, high drug-loading efficiency, and a size of less than ca. 150 nm with low polydispersity indices. The formation of polymeric micelles and the solubilization locus were investigated by ¹H NMR and XPS. ZnPc localized within the PM core, whereas both ZnPcF₁₆ and ZnPc-sulfo₄ - in the corona of PMs. We proved that the cargo locus is crucial for the photochemical properties of the studied phthalocyanines; the increase in photostability and ability to generate ROS in micellar solution compared to free photosensitizer was most significant for the photosensitizer in the PM core. Our results indicate the role of the cargo location in the PM microenvironment and demonstrate that such attempts are fundamental for improving the properties of photosensitizers and their assumed efficiency as nanophotosensitizers in PDT.

Quantifying the Impact of Nanoparticle Coatings and Nonuniformities on XPS Analysis: Gold/Silver Core-Shell Nanoparticles

Spectral modeling of photoelectrons can serve as a valuable tool when combined with X-ray photoelectron spectroscopy (XPS) analysis. Herein, a new version of the NIST Simulation of Electron Spectra for Surface Analysis (SESSA 2.0) software, capable of directly simulating spherical multilayer NPs, was applied to model citrate stabilized Au/Ag-core/shell nanoparticles (NPs). The NPs were characterized using XPS and scanning transmission electron microscopy (STEM) to determine the composition and morphology of the NPs. The Au/Ag-core/shell NPs were observed to be polydispersed in size, nonspherical, and contain off-centered Au-cores. Using the average NP dimensions determined from STEM analysis, SESSA spectral modeling indicated that washed Au/Ag-core-shell NPs were stabilized with a 0.8 nm layer of sodium citrate and a 0.05 nm (one wash) or 0.025 nm (two wash) layer of adventitious hydrocarbon, but did not fully account for the observed XPS signal from the Au-core. This was addressed by a series of simulations and normalizations to account for contributions of NP nonsphericity and off-centered Au-cores. Both of these nonuniformities reduce the effective Ag-shell thickness, which effect the Au-core photoelectron intensity. The off-centered cores had the greatest impact for the particles in this study. When the contributions from the geometrical nonuniformities are included in the simulations, the SESSA generated elemental compositions that matched the XPS elemental compositions. This work demonstrates how spectral modeling software such as SESSA, when combined with experimental XPS and STEM measurements, advances the ability to quantitatively assess overlayer thicknesses for multilayer core-shell NPs and deal with complex, nonideal geometrical properties.

Optimization of novel pentablock copolymer based composite formulation for sustained delivery of peptide/protein in the treatment of ocular diseases

This manuscript is focussed on the development of pentablock (PB) copolymer based sustained release formulation for the treatment of posterior segment ocular diseases. We have successfully synthesised biodegradable and biocompatible PB copolymers for the preparation of nanoparticles (NPs) and thermosensitive gel. Achieving high drug loading with hydrophilic biotherapeutics (peptides/proteins) is a challenging task. Moreover, small intravitreal injection volume (≤100 μL) requires high loading to develop a long term (six months) sustained release formulation. We have successfully investigated various formulation parameters to achieve maximum peptide/protein (octreotide, insulin, lysozyme, IgG-Fab, IgG, and catalase) loading in PB NPs. Improvement in drug loading can facilitate delivery of larger doses of therapeutic proteins via limited injection volume. A composite formulation comprised of NPs in gel system exhibited sustained release (without burst effect) of peptides and proteins, may serve as a platform technology for the treatment of posterior segment ocular diseases.

Tailor-made pentablock copolymer based formulation for sustained ocular delivery of protein therapeutics

The objective of this research article is to report the synthesis and evaluation of novel pentablock copolymers for controlled delivery of macromolecules in the treatment of posterior segment diseases. Novel biodegradable PB copolymers were synthesized by sequential ring-opening polymerization. Various ratios and molecular weights of each block (polyglycolic acid, polyethylene glycol, polylactic acid, and polycaprolactone) were selected for synthesis and to optimize release profile of FITC-BSA, IgG, and bevacizumab from nanoparticles (NPs) and thermosensitive gel. NPs were characterized for particle size, polydispersity, entrapment efficiency, and drug loading. In vitro release study of proteins from NPs alone and composite formulation (NPs suspended in thermosensitive gel) was performed. Composite formulations demonstrated no or negligible burst release with continuous near zero-order release in contrast to NPs alone. Hydrodynamic diameter of protein therapeutics and hydrophobicity of PB copolymer exhibited significant effect on entrapment efficiency and in vitro release profile. CD spectroscopy confirmed retention of structural conformation of released protein. Biological activity of released bevacizumab was confirmed by in vitro cell proliferation and cell migration assays. It can be concluded that novel PB polymers can serve a platform for sustained delivery of therapeutic proteins.

Targeted nanoparticles with novel non-peptidic ligands for oral delivery

Orally administered targeted nanoparticles have a large number of potential biomedical applications and display several putative advantages for oral drug delivery, such as the protection of fragile drugs or modification of drug pharmacokinetics. These advantages notwithstanding, oral drug delivery by nanoparticles remains challenging. The optimization of particle size and surface properties and targeting by ligand grafting have been shown to enhance nanoparticle transport across the intestinal epithelium. Here, different grafting strategies for non-peptidic ligands, e.g., peptidomimetics, lectin mimetics, sugars and vitamins, that are stable in the gastrointestinal tract are discussed. We demonstrate that the grafting of these non-peptidic ligands allows nanoparticles to be targeted to M cells, enterocytes, immune cells or L cells. We show that these grafted nanoparticles could be promising vehicles for oral vaccination by targeting M cells or for the delivery of therapeutic proteins. We suggest that targeting L cells could be useful for the treatment of type 2 diabetes or obesity.

Self-assembled poly(ε-caprolactone)-g-chondroitin sulfate copolymers as an intracellular doxorubicin delivery carrier against lung cancer cells

The aim of this study was to utilize self-assembled polycaprolactone (PCL)-grafted chondroitin sulfate (CS) as an anticancer drug carrier. We separately introduced double bonds to the hydrophobic PCL and the hydrophilic CS. The modified PCL was reacted with the modified CS through a radical reaction (CSMA-g-PCL). The copolymer without doxorubicin (DOX) was noncytotoxic in CRL-5802 and NCI-H358 cells at a concentration ranging from 5–1000 μg/mL and DOX-loaded CSMA-g-PCL (Micelle DOX) had the lowest inhibitory concentration of 50% cell growth values against the NCI-H358 cells among test samples. The cellular uptake of Micelle DOX into the cells was confirmed by flow cytometric data and confocal laser scanning microscopic images. The in vivo tumor-targeting efficacy of Micelle DOX was realized using an NCI-H358 xenograft nude mouse model. The mice administered with Micelle DOX showed suppressed growth of the NCI-H358 lung tumor compared with those administered with phosphate-buffered saline and free DOX.

Polyoctanediol citrate/sebacate bioelastomer films: surface morphology, chemistry and functionality

Elastomeric polyesters synthesized from non-toxic and biocompatible reactants are topical research materials for tissue-engineering applications. In such applications, the morphology, chemistry and functionality of the materials surfaces play a key role. While a number of papers have focused and reported on the fabrication and biological evaluation of elastic polyesters, only a few have attempted to characterise the surfaces of such materials. In this paper, we report on the preparation and surface characterization of films of a co-polyester bioelastomer, polyoctanediol citrate/sebacate (p(OCS)). The co-polymer was synthesized following the standard procedure of polyesterification using three non-toxic monomers (1,8-octanediol, citric acid and sebacic acid) in a catalyst-free environment. Nuclear magnetic resonance spectroscopy was used to monitor the chemical composition of the various p(OCS) elastomers. The p(OCS) films, prepared by both spin-coating and solvent casting of the p(OCS) pre-polymer solutions, were characterized by scanning electron microscopy, UV-Vis titration, photo-acoustic Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, and tested for their cytocompatibility. The results obtained suggest that the surface morphology, chemistry and the concentration of the surface functional groups can be controlled by simply varying the initial acid concentration (citric/sebacic acids) in the pre-polymer. The films supported the attachment and proliferation of osteoblast-like cells (MG63). This unique approach provides an effective method of controlling and monitoring the fundamental p(OCS) surface properties important for their potential utilisation as a tissue-engineering material.

Light-Induced Functionalization of Amphiphilic Block Copolymers: Application to Nanoparticles for Drug Targeting

Photografting of bifunctional photolinker on biocompatible amphiphilic copolymers, such as PCL-b-PEGs and PLGA-b-PEGs, has been developed as a practical and versatile strategy for the materials functionalisation. Depending on the copolymer nature (block length, % of crystallinity) and the experimental conditions we could selectively direct the grafting on the hydrophilic PEG segments. The resulting copolymers were further derivatized with molecules of interest (RGD-peptides, LDV-peptides, “home-made”peptidomimetics, mannose derivatives,…) by substitution of the O-succinimidyl ester of the photolinker. The derivatization rates were controlled by radiolabelling, colorimetric assay and XPS spectroscopy. The functionalized copolymers were used in the formulation of nanoparticles displaying the ligands on their outer-shell. This nanoparticulate system was successfully employed for the oral vectorisation of antigen and for the targeted delivery of an anticancer drug.

Targeting of tumor endothelium by RGD-grafted PLGA-nanoparticles loaded with paclitaxel

Paclitaxel (PTX)-loaded PEGylated PLGA-based nanoparticles (NP) have been previously described as more effective in vitro and in vivo than taxol. The aim of this study was to test the hypothesis that our PEGylated PLGA-based nanoparticles grafted with the RGD peptide or RGD-peptidomimetic (RGDp) would target the tumor endothelium and would further enhance the anti-tumor efficacy of PTX. The ligands were grafted on the PEG chain of PCL-b-PEG included in the nanoparticles. We observed in vitro that RGD-grafted nanoparticles were more associated to human umbilical vein endothelial cells (HUVEC) by binding to alpha(v)beta(3) integrin than non-targeted nanoparticles. Doxorubicin was also used to confirm the findings observed for PTX. In vivo, we demonstrated the targeting of RGD and RGDp-grafted nanoparticles to tumor vessels as well as the effective retardation of TLT tumor growth and prolonged survival times of mice treated by PTX-loaded RGD-nanoparticles when compared to non-targeted nanoparticles. Hence, the targeting of anti-cancer drug to tumor endothelium by RGD-labeled NP is a promising approach.

Surface functionalization of germanium ATR devices for use in FTIR-biosensors

Biosensors based on intrinsic detection methods have attracted growing interest. The use of Fourier transform infra-red (FTIR) spectroscopy with the attenuated internal total reflection (ATR) mode, in the biodetection context, requires appropriate surface functionalization of the ATR optical element. Here, we report the direct grafting of a thin organic layer (about 20 A depth) on the surface of a germanium crystal. This covering, constructed with novel amphiphilic molecules 2b (namely, 2,5,8,11,14,17,20-heptaoxadocosan-22-yl-3-(triethoxysilyl) propylcarbamate), is stable for several hours under phosphate buffered saline (PBS) flux and features protein-repulsive properties. Photografting of molecule 5 (namely, O-succinimidyl 4-(p-azidophenyl)butanoate) affords the activated ATR element, ready for the covalent fixation of receptors, penicillin recognizing proteins BlaR-CTD for instance. The different steps of the previous construction have been monitored by water contact angle (theta(w)) measurements, spectroscopic ellipsometry (covering depth), X-ray photoelectron spectroscopy (XPS) by using a fluorinated tag for the control of surface reactivity, and FTIR-ATR spectroscopy for the structural analysis of grafted molecules. Indeed, contrarily to silicon device, germanium device offers a broad spectral window (1000-4000 cm(-1)) and thus amide I and II absorption bands can be recorded. This work lays the foundations for the construction of novel FTIR biosensors.