Block copolymer micelles as nanocontainers for controlled release of proteins from biocompatible oil phases

Valine conjugated polymeric nanocarriers for targeted co-delivery of rivastigmine and quercetin in rat model of Alzheimer disease

Multifunctional nanocarriers are increasingly promising for disease treatment aimed at finding effective therapy and overcoming barriers in drug delivery. Herein, valine conjugated chitosan (VLCS) was used for surface modification of nanocarriers (NCs) based on Poly (ε-caprolactone)-Poly (ethylene glycol)-Poly (ε-caprolactone) (PCL-PEG-PCL) triblock copolymers (NCs@VLCS). The nanocarriers were co-loaded with rivastigmine (RV) and quercetin (QT) to yield the final RV/QT-NCs@VLCS as a multifunctional nanocarrier for Alzheimer's disease (AD) treatment. The large amino acid transporter 1 (LAT-1) was selected for the direction of the NCs to the brain. The biocompatibility of the nanocarrier was studied in HEK-293 and SH-SY5Y cells and rats. The Morris water maze test demonstrated a faster regain of memory loss with RV/QT-NCs@VLCS compared to the other groups. Furthermore, RV/QT-NCs@VLCS and RV/QT-NCs improved GSH depletion induced by scopolamine (SCO), with RV/QT-NCs@VLCS having a superior effect. The real-time PCR analysis revealed that co-delivery of RV and QT by NCs@VLCS showed significantly higher efficacy than sole delivery of RV. RV/QT-NCs@VLCS treatment also modulated the expression of BDNF, ACHE, and TNF-α. The findings revealed that NCs@VLCS co-loaded with RV and QT, significantly increased efficacy relative to the single use of RV and could be considered a potent multifunctional drug delivery system for Alzheimer's treatment.

Fabrication and Characterization of Antibody-Loaded Cationic Porous PLGA Microparticles for Sustained Antibody Release

Poly lactic-co-glycolic acid (PLGA) microparticles have been formulated to allow the sustained release of numerous drugs, including antibodies. It is well-known that antibodies are susceptible to chemical and physical stress; therefore, it is necessary to be loaded on PLGA microparticles under mild conditions. In the present study, we constructed cationic porous PLGA microparticles that could be electrostatically adsorbed with infliximab as a model antibody. Cationic porous PLGA microparticles were prepared using the double emulsion method by adding polyethyleneimine and ammonium bicarbonate. After antibody loading, surface pores closure was achieved by mild heating. The size of the optimized formulation was approximately 5 μm, exhibiting a positive charge. The loaded antibody was gradually released from the formulation over 56 days. Based on a tumor necrosis factor (TNF)-α inhibition assay, the released infliximab maintained its pharmacological activity. Collectively, we successfully loaded antibodies into PLGA microparticles while maintaining activity and demonstrating long-acting properties.

Hybrid cell constructs consisting of bioprinted cell-spheroids

Bioprinted cell constructs have been investigated for regeneration of various tissues. However, poor cell-cell interactions have limited their utility. Although cell-spheroids offer an alternative for efficient cell-cell interactions, they complicate bioprinting. Here, we introduce a new cell-printing process, fabricating cell-spheroids and cell-loaded constructs together without preparation of cell-spheroids in advance. Cells in mineral oil droplets self-assembled to form cell-spheroids due to the oil-aqueous interaction, exhibiting similar biological functions to the conventionally prepared cell-spheroids. By controlling printing parameters, spheroid diameter and location could be manipulated. To demonstrate the feasibility of this process, we fabricated hybrid cell constructs, consisting of endothelial cell-spheroids and stem cells loaded decellularized extracellular matrix/β-tricalcium phosphate struts for regenerating vascularized bone. The hybrid cell constructs exhibited strong angiogenic/osteogenic activities as a result of increased secretion of signaling molecules and synergistic crosstalk between the cells.

Protein Release by Controlled Desorption from Transiently Cationic Nanoparticles

Therapeutic release from hydrogels is traditionally controlled by encapsulation within nanoparticles; however, this strategy is limited for the release of proteins due to poor efficiency and denaturation. To overcome this problem, we designed an encapsulation-free release platform where negatively charged proteins are adsorbed to the exterior of transiently cationic nanoparticles, thus allowing the nanoparticles to be formulated separately from the proteins. Release is then governed by the change in nanoparticle surface charge from positive to neutral. To achieve this, we synthesized eight zwitterionic poly(lactide-block-carboxybetaine) copolymer derivatives and formulated them into nanoparticles with differing surface chemistry. The nanoparticles were colloidally stable and lost positive charge at rates dependent on the hydrolytic stability of their surface ester groups. The nanoparticles (NPs) were dispersed in a physically cross-linked hyaluronan-based hydrogel with one of three negatively charged proteins (transferrin, panitumumab, or granulocyte-macrophage colony-stimulating factor) to assess their ability to control release. For all three proteins, dispersing NPs within the gels resulted in significant attenuation of release, with the extent modulated by the hydrolytic stability of the surface groups. Release was rapid from fast-hydrolyzing ester groups, reduced with slow-hydrolyzing bulky ester groups, and very slow with nonhydrolyzing amide groups. When positively charged lysozyme was loaded into the nanocomposite gel, there was no significant attenuation of release compared to gel alone. These data demonstrate that electrostatic interactions between the protein and NP are the primary driver of protein release from the hydrogel. All released proteins retained bioactivity as determined with in vitro cell assays. This release strategy shows tremendous versatility and provides a promising new platform for controlled release of anionic protein therapeutics.

Block copolymer self-assembly assisted fabrication of laterally organized- and stacked- nanoarrays

Block copolymer (BCP) self-assembly processes are often seen as reliable techniques for advanced nanopatterning to achieve functional surfaces and create templates for nanofabrication. By taking advantage of the tunability in pitch, diameter and feature-to-feature separation of the self-assembled BCP features, complex, laterally organized- and stacked- multicomponent nanoarrays comprising of gold and polymer have been fabricated. The approaches not only demonstrate nanopatterning of up to two levels of hierarchy but also investigate how a variation in the feature-to-feature gap at the first hierarchy affects the self-assembly of polymer features at the second. Such BCP self-assembly enabled multicomponent nanoarray configurations are rarely achieved by other nanofabrication approaches and are particularly promising for pushing the boundaries of block copolymer lithography and in creating unique surface architectures and complex morphologies at the nanoscale.

Preparation, Optimization, and Evaluation of Methoxy Poly(ethylene glycol)-co-Poly(ε-caprolactone) Nanoparticles Loaded by Rivastigmine for Brain Delivery

The objective of this study was to formulate and investigate the neuropharmacokinetics and pharmacodynamics of rivastigmine (Riv) loaded methoxy poly(ethylene glycol)-co-poly(ε-caprolactone) (MPEG-PCL) nanoparticles (Riv-NPs) in rats after IV administration. The MPEG-PCL was synthesized via ring-opening polymerization of ε-caprolactone by MPEG and used to prepare Riv-NPs by the nanoprecipitation method. Response surface D-optimal design was applied to optimize Riv-NPs drug delivery system. The optimized formulation showed a particle size (PS) of 98.5 ± 2.1 nm, drug loading (DL) of 19.2 ± 1.1%, and sustained release behavior of the drug. Moreover, the optimized Riv-NPs were characterized by AFM and DSC analyses. A simple and sensitive HPLC-DAD method for bioanalysis was developed and successfully applied to the pharmacokinetic study. The neuropharmacokinetic study in rats indicated that the integration plot was linear, and the brain uptake clearance of the drug-loaded in MPEG-PCL NPs was significantly higher than the free drug. Furthermore, results of pharmacodynamic studies using the Morris water maze test demonstrated faster regain of memory loss with Riv-NPs when compared to the free drug solution. The results revealed that the mentioned biodegradable nanoparticle holds promise as a suitable drug carrier for brain drug delivery.

Self-Assembly of Block and Graft Copolymers in Organic Solvents: An Overview of Recent Advances

This review is an attempt to update the recent advances in the self-assembly of amphiphilic block and graft copolymers. Their micellization behavior is highlighted for linear AB, ABC triblock terpolymers, and graft structures in non-aqueous selective polar and non-polar solvents, including solvent mixtures and ionic liquids. The micellar characteristics, such as particle size, aggregation number, and morphology, are examined as a function of the copolymers' architecture and molecular characteristics.

Fractionation of poly(methacrylic acid) and poly(vinyl pyridine) in aqueous and organic mobile phases by multidetector thermal field-flow fractionation

Multidetector thermal field-flow fractionation (ThFFF) is shown to be a versatile characterisation platform that can be used to characterise hydrophilic polymers in a variety of organic and aqueous solutions with various ionic strengths. It is demonstrated that ThFFF fractionates isotactic and syndiotactic poly(methacrylic acid) (PMAA) as well as poly(2-vinyl pyridine) (P2VP) and poly(4-vinyl pyridine) (P4VP) according to microstructure in organic solvents and that the ionic strength of the mobile phase has no influence on the retention behaviour of the polymers. With regard to aqueous solutions, it is shown that, despite the weak retention, isotactic and syndiotactic PMAA show different retention behaviours which can qualitatively be attributed to microstructure. Additionally, it is shown that the ionic strength of the mobile phase has a significant influence on the thermal diffusion of polyelectrolytes in aqueous solutions and that the addition of an electrolyte is essential to achieve a microstructure-based separation of P2VP and P4VP in aqueous solutions.

Chemical Synthesis, Versatile Structures and Functions of Tailorable Adjuvants for Optimizing Oral Vaccination

Oral vaccines have become a recent focus because of their potential significance in disease prevention and therapy. In the development of oral vaccine-based therapeutics, synthetic materials with tailorable structures and versatile functions can act as antigen conveyers with adjuvant effects, reduce the time cost for vaccine optimization, and provide high security and enhanced immunity. This review presents an overview of the current status of tailoring synthetic adjuvants for oral vaccination, modification strategies for producing effectors with specific structures and functions, enhancement of immune-associated efficiencies, including the barrier-crossing capability to protect antigens in the gastrointestinal tract, coordination of the antigens penetrating mucosa and cell barriers, targeting of concentrated antigens to immune-associated cells, and direct stimulation of immune cells. Finally, we focus on prospective synthetic adjuvants that facilitate the use of oral vaccines via two approaches, namely, in vivo antigen expression and cancer immunotherapy.

Stability of Water/Poly(ethylene oxide)43-b-poly(ε-caprolactone)14/Cyclohexanone Emulsions Involves Water Exchange between the Core and the Bulk

The formation of emulsions upon reverse self-association of the monodisperse amphiphilic block copolymer poly(ethylene oxide)43-b-poly(ε-caprolactone)14 in cyclohexanone is reported. Such emulsions are not formed in toluene, chloroform, or dichloromethane. We demonstrate by magnetic resonance spectroscopy the active role of the solvent on the stabilization of the emulsions. Cyclohexanone shows high affinity for both blocks, as predicted by the Hansen solubility parameters, so that the copolymer chains are fully dissolved as monomeric chains. In addition, the solvent is able to produce hydrogen bonding with water molecules. Water undergoes molecular exchange between water molecules associated with the polymer and water molecules associated with the solvent, dynamics of major importance for the stabilization of the emulsions. Association of polymeric chains forming reverse aggregates is induced by water over a concentration threshold of 5 wt %. Reverse copolymer aggregates show submicron average hydrodynamic diameters, as seen by dynamic light scattering, depending on the polymer and water concentration.

Polymeric micelles for oral drug administration enabling locoregional and systemic treatments

INTRODUCTION

Amphiphilic block copolymers are recognized components of parenteral drug nanocarriers. However, their performance in oral administration has barely been evaluated to any great extent.

AREAS COVERED

This review provides an overview of the methods used to prepare drug-loaded polymeric micelles and to evaluate their stability in gastrointestinal (GI) fluids, and then analyzes in detail recent in vitro and in vivo results about their performance in oral drug delivery. Oral administration of polymeric micelles has been tested for a variety of therapeutic purposes, namely, to increase apparent drug solubility in the GI fluids and facilitate absorption, to penetrate in pathological regions of the GI tract for locoregional treatment, to carry the drug directly toward the blood stream minimizing presystemic loses, and to target the drug after oral absorption to specific tissue or cells in the body.

EXPERT OPINION

Each therapeutic purpose demands micelles with different performance regarding stability in the GI tract, ability to overcome physiological barriers and drug release patterns. Depending on the block copolymer composition and structure, a wealth of self-assembled micelles with different morphologies and stability can be prepared. Moreover, copolymer unimers can play a role in improving drug absorption through the GI mucosa, either by increasing membrane permeability to the drug and/or the carrier or by inhibiting drug efflux transporters or first-pass metabolism. Therefore, polymeric micelles can be pointed out as versatile vehicles to increase oral bioavailability of drugs that exhibit poor solubility or permeability and may even be an alternative to parenteral carriers when targeting is pursued.

Coalescence-assisted generation of single nanoliter droplets with predefined composition

We demonstrate the generation of highly accurate nanoliter droplets with a predefined composition. This composition control over a single droplet is achieved by merging two droplets with known concentrations and defined volumes. A forced coalescence is accomplished by synchronizing two piezoelectric-based active droplet generators. A microscope-mounted CCD camera is used to record, quantify and monitor the process to assure its high fidelity. The device is disposable, surfactant free, simple to operate and does not require microelectrode fabrication. It delivers a single on-demand droplet with adjustable high resolution mixing ratios up to 9 at a volume range of 1-10 nanoliters. The presented platform offers, for the first time, a means to perform droplet-based high-throughput screening in the nanoliter range.

Nanomicellar formulations for sustained drug delivery: strategies and underlying principles

Micellar delivery systems smaller than 100 nm can be readily prepared. While micelles allow a great depth of tissue penetration for targeted drug delivery, they usually disintegrate rapidly in the body. Thus, sustained drug delivery from micellar nanocarriers is a challenge. This article summarizes various key strategies and underlying principles for sustained drug delivery using micellar nanocarriers. Comparisons are made with other competing delivery systems such as polymeric microparticles and nanoparticles. Amphiphilic molecules self-assemble in appropriate liquid media to form nanoscale micelles. Strategies for sustained release nanomicellar carriers include use of prodrugs, drug polymer conjugates, novel polymers with low critical micellar concentration or of a reverse thermoresponsive nature, reverse micelles, multi-layer micelles with layer by layer assembly, polymeric films capable of forming micelles in vivo and micelle coats on a solid support. These new micellar systems are promising for sustained drug delivery.