Structural determinants of antimicrobial activity and biocompatibility in membrane-disrupting methacrylamide random copolymers

AI-guided few-shot inverse design of HDP-mimicking polymers against drug-resistant bacteria

Host defense peptide (HDP)-mimicking polymers are promising therapeutic alternatives to antibiotics and have large-scale untapped potential. Artificial intelligence (AI) exhibits promising performance on large-scale chemical-content design, however, existing AI methods face difficulties on scarcity data in each family of HDP-mimicking polymers (<102), much smaller than public polymer datasets (>105), and multi-constraints on properties and structures when exploring high-dimensional polymer space. Herein, we develop a universal AI-guided few-shot inverse design framework by designing multi-modal representations to enrich polymer information for predictions and creating a graph grammar distillation for chemical space restriction to improve the efficiency of multi-constrained polymer generation with reinforcement learning. Exampled with HDP-mimicking β-amino acid polymers, we successfully simulate predictions of over 105 polymers and identify 83 optimal polymers. Furthermore, we synthesize an optimal polymer DM0.8iPen0.2 and find that this polymer exhibits broad-spectrum and potent antibacterial activity against multiple clinically isolated antibiotic-resistant pathogens, validating the effectiveness of AI-guided design strategy.

Unlocking the Potential: PEGylation and Molecular Weight Reduction of Ionenes for Enhanced Antifungal Activity and Biocompatibility

Numerous synthetic polymers, imitating natural antimicrobial peptides, have demonstrated potent antimicrobial activity, positioning them as potential candidates for new antimicrobial drugs. However, the high activity of these molecules often comes at the cost of elevated toxicity against eukaryotic organisms. In this study, a series of cationic ionenes with varying molecular weights to assess the influence of polymer chain length on ionene activity is investigated. To enhance polymer antimicrobial activity and limit toxicity a PEG side chain is introduced into the repeating unit. The resulting molecules consistently exhibited high activity against three model organisms: E. coli, S. aureus and C. albicans. The incorporation of side PEG chain improves antifungal properties and biocompatibility, regardless of molecular weight. The most important finding of this work is that the reduction of polymer molecular mass led to increased antifungal activity and reduced cytotoxicity against HMF and MRC-5 cell lines simultaneously. As a result, the best-performing molecules reported herein displayed minimal inhibitory concentrations (MIC) as low as 2 and 0.0625 µg mL1 for C. albicans and C. tropicalis respectively, demonstrating exceptional selectivity. It is plausible that some of described herein molecules can serve as potential lead candidates for new antifungal drugs.

Antibacterial activity of hydrophobicity modulated cationic polymers with enzyme and pH-responsiveness

The membrane lipid compositions of prokaryotic and eukaryotic cells are inherently different in many aspects, although some similarities exist in their structure and composition. Therefore, selective targeting of membrane lipids with a compound of therapeutic value, such as an antibacterial copolymer, is often challenging. Hence, developing an ideal copolymer with antibacterial properties demands hydrophobicity/hydrophilicity balance with a high biosafety profile. To integrate hydrophobic/hydrophilic balance and cationic charge in an alternating antibacterial copolymer with enzyme and pH-responsiveness, a lysine appended styrenic monomer was copolymerized with a fatty acid (octanoic acid (OA) or myristic acid (MA)) tethered maleimide monomer via reversible addition-fragmentation chain transfer (RAFT) polymerization. A range of microscopic analyses, including dynamic light scattering (DLS), confirmed the formation of nanoaggregates (size ∼30-40 nm) by these polymers in aqueous solution with positive zeta potential (cationic surface charge). Hydrophobic Nile red (NR) dye was successfully encapsulated in the nanoaggregates, and the in vitro release kinetics of the NR dye were monitored at different pHs and in the presence or absence of esterase/lipase. The in vitro release kinetics of NR revealed ∼85% dye release in the presence of pH 5.5 and lipase, suggesting their suitability for pH/enzyme-triggered therapeutic payload delivery. The standard broth microdilution assay showed significant bactericidal activity against both Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria with an MIC50 value <30 μg mL-1. The effect of polymeric nanoaggregates on bacterial morphology and in vitro survival was further confirmed by field emission scanning electron microscopy (FESEM), agar gel disk diffusion assay, and bacterial live/dead cell count. The significantly low hemolytic activity against red blood cells (RBCs) (HC50 >103 μg mL-1) and nontoxic effect on human intestinal epithelial cells (INT 407) (EC50 >500 μg mL-1) ensure that the polymer nanoaggregates are safe for in vivo use and can serve as a potent antibacterial polymer.

Synthesis and antibacterial properties of fluorinated biodegradable cationic polyesters

Antimicrobial peptide-mimicking antibacterial polymers represent a practical strategy to conquer the ever-growing threat of antimicrobial resistance. Herein, we report the syntheses and antibacterial performance of degradable amphiphilic cationic polyesters containing pendent quaternary ammonium motifs and hydrophobic alkyl or fluoroalkyl groups. These polyesters were conveniently prepared from poly(3-methylene-1,5-dioxepan-2-one) via highly efficient one-pot successive thiol-Michael addition reactions. The antibacterial activity of these polyesters against S. aureus and E. coli and their hemolytic activity toward red blood cells were evaluated; some of them showed moderate antibacterial activity and selectivity against Gram-positive S. aureus. The membrane disruption mechanism of these cationic polyesters was briefly explored by monitoring the bacteria killing kinetics and SEM observations. Moreover, the effects of cationic/hydrophobic ratio and the incorporation of fluoroalkyl groups on the antibacterial activity and selectivity of the polyesters were demonstrated.

A Temperature and pH Dual-Sensitive Multifunctional Polyurethane with Bacteria-Triggered Antibacterial Activity

An effective and practical antibacterial strategy is to design multifunctional and stimuli-responsive materials that exhibit antibacterial activity in response to bacterial triggers. In this study, because the metabolism of Staphylococcus aureus (S. aureus) can acidify the surrounding environment and pH level can affect the lower critical solution temperature of temperature/pH dual-sensitive polymers, a monomer containing a temperature-sensitive N-isopropyl amide derivative and pH-sensitive tertiary amine groups is first synthesized. Then, the monomer is copolymerized with a polyurethane chain, and partial tertiary amine groups are quaternized to obtain bactericidal activity. The modified polyurethane exhibits temperature/pH sensitivity, antibacterial adhesion activity, bactericidal activity, and good cytocompatibility. An in situ investigation of bacterial behavior and pH changes in the bacterial suspension during the process confirms that the temperature/pH dual-sensitive polyurethane successfully achieves antibacterial activity though the metabolic activity of S. aureus without external intervention. This design concept provides a new perspective for antibacterial material design.

Mechanism of Action of Oxazoline-Based Antimicrobial Polymers Against Staphylococcus aureus: In Vivo Antimicrobial Activity Evaluation

Antimicrobial-resistant pathogens have reached alarming levels, becoming one of the most pressing global health issues. Hence, new treatments are necessary for the fight against antimicrobial resistance. Synthetic nanoengineered antimicrobial polymers (SNAPs) have emerged as a promising alternative to antimicrobial peptides, overcoming some of their limitations while keeping their key features. Herein, a library of amphiphilic oxazoline-based SNAPs using cationic ring-opening polymerization (CROP) is designed. Amphipathic compounds with 70% cationic content exhibit the highest activity against clinically relevant Staphylococcus aureus isolates, maintaining good biocompatibility in vitro and in vivo. The mechanism of action of the lead compounds against S. aureus is assessed using various microscopy techniques, indicating cell membrane disruption, while the cell wall remains unaffected. Furthermore, a potential interaction of the compounds with bacterial DNA is shown, with possible implications on bacterial division. Finally, one of the compounds exhibits high efficacy in vivo in an insect infection model.

Facial amphiphilic naphthoic acid-derived antimicrobial polymers against multi-drug resistant gram-negative bacteria and biofilms

Inspired by the facial amphiphilic nature and antimicrobial efficacy of many antimicrobial peptides, this work reported facial amphiphilic bicyclic naphthoic acid derivatives with different ratios of charges to rings that were installed onto side chains of poly(glycidyl methacrylate). Six quaternary ammonium-charged (QAC) polymers were prepared to investigate the structure-activity relationship. These QAC polymers displayed potent antibacterial activity against various multi-drug resistant (MDR) gram-negative pathogens such as Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Acinetobacter baumannii. Polymers demonstrated low hemolysis and high antimicrobial selectivity. Additionally, they were able to eradicate established biofilms and kill metabolically inactive dormant cells. The membrane permeabilization and depolarization results indicated a mechanism of action through membrane disruption. Two lead polymers showed no resistance from MDR-P. aeruginosa and MDR-K. pneumoniae. These facial amphiphiles are potentially a new class of potent antimicrobial agents to tackle the antimicrobial resistance for both planktonic and biofilm-related infections.

Highly active nanoparticle enhanced rapid adsorption-killing mechanism to combat multidrug-resistant bacteria

Contact-killing surfaces with the ability to rapidly adsorb and kill microorganisms are desperately needed since the rapid outbreak of multidrug-resistant (MDR) bacteria poses a serious threat to human health. Therefore, a series of amphiphilic nanoengineered polyquaterniums (ANPQs) were synthesized, and immobilizing ANPQs onto equipment surfaces provided a simple method for preventing microbial infections. The strong charge-positive property of ANPQ offered the possibility of rapid adsorption and efficient killing, such that all bacteria are adsorbed after 10 seconds of contact with ANPQ-treated fabrics, and more than 99.99% of pathogens are killed within 30 seconds. Surprisingly, the adsorption-killing mechanism made it difficult for bacteria to develop resistance to ANPQ coating, even after long-term repeated treatment. Importantly, in a Methicillin-resistant Staphylococcus aureus infection model, ANPQ-treated fabrics exhibited a potent anti-infectious performance while remaining nontoxic. It is envisaged that the strategy of using ANPQ coating undoubtedly provides a promising candidate for fighting MDR strains.

pH Window for High Selectivity of Ionizable Antimicrobial Polymers toward Bacteria

Antimicrobial polymers exhibit great potential for treating drug-resistant bacteria; however, designing antimicrobial polymers that can selectively kill bacteria and cause relatively low toxicity to normal tissues/cells remains a key challenge. Here, we report a pH window for ionizable polymers that exhibit high selectivity toward bacteria. Ionizable polymer PC6A showed the greatest selectivity (131.6) at pH 7.4, exhibiting low hemolytic activity and high antimicrobial activity against bacteria, whereas a very high or low protonation degree (PD) produced relatively low selectivity (≤35.6). Bactericidal mechanism of PC6A primarily comprised membrane lysis without inducing drug resistance even after consecutive incubation for 32 passages. Furthermore, PC6A demonstrated synergistic effects in combination with antibiotics at pH 7.4. Hence, this study provides a strategy for designing selective antimicrobial polymers.

Polytrimethylenimines: Highly Potent Antibacterial Agents with Activity and Toxicity Modulated by the Polymer Molecular Weight

Cationic polymers have been extensively investigated as a potential replacement for traditional antibiotics. Here, we examined the effect of molecular weight (MW) on the antimicrobial, cytotoxic, and hemolytic activity of linear polytrimethylenimine (L-PTMI). The results indicate that the biological activity of the polymer sharply increases as MW increases. Thanks to a different position of the antibacterial activity and toxicity thresholds, tuning the MW of PTMI allows one to achieve a therapeutic window between antimicrobial activity and toxicity concentrations. L-PTMI presents significantly higher antimicrobial activity against model microorganisms than linear polyethylenimine (L-PEI) when polymers with a similar number of repeating units are compared. For the derivatives of L-PTMI and L-PEI, obtained through N-monomethylation and partial N,N-dimethylation of linear polyamines, the antimicrobial activity and toxicity were both reduced; however, resulting selectivity indices were higher. Selected materials were tested against clinical isolates of pathogens from the ESKAPE group and Mycobacteria, revealing good antibacterial properties of L-PTMI against antibiotic-resistant strains of Gram-positive and Gram-negative bacteria but limited antibacterial properties against Mycobacteria.

Small Molecular Mimetics of Antimicrobial Peptides as a Promising Therapy To Combat Bacterial Resistance

Clinically, antibiotics are widely used to treat infectious diseases; however, excessive drug abuse and overuse exacerbate the prevalence of drug-resistant bacterial pathogens, making the development of novel antibiotics extremely difficult. Antimicrobial peptide (AMP) is one of the most promising candidates for overcoming bacterial resistance owing to its unique structure and mechanism of action. This study examines the development of small molecular mimetics of AMPs over the past two decades. These mimetics can selectively disrupt membranes, which are the characteristic antibacterial mechanism of AMPs. In addition, the advantages and disadvantages of small AMP mimetics are discussed. The small molecular mimetics of AMPs are anticipated to garner interest and investment in discovering new antibiotics. This Perspective will assist in revitalizing the golden age of antibiotics in the current era of combating bacterial resistance.

Targeting Cariogenic Streptococcus mutans in Oral Biofilms with Charge-Switching Smart Antimicrobial Polymers

Cariogenic biofilms produce strong acidic microenvironments, which is the primary cause of dental caries. Streptococcus mutans is a dominant species in cariogenic biofilms. Herein, we report a pH-responsive, charge-switching smart copolymer to selectively target and eradicate bacteria in cariogenic biofilms. To that end, the copolymer is designed to be activated in an acidic environment. The smart copolymer, Poly-1A, consists of ternary compositions of monomers with a cationic ethyl ammonium group, a carboxylic group, and a hydrophobic group in the side chains. The net charge of Poly-1A was charge neutral at neutral pH, but it switched to be cationic because the acidic carboxylate side chains were protonated and became neutral; however, the ammonium groups remained positive. Poly-1A with a net positive charge bound to the anionic surface of oral bacteria by electrostatic interactions and disrupted the bacterial membranes, causing bacterial death. Poly-1A reduced the cell viability of planktonic and biofilm S. mutans at pH 4.5, while it was not bactericidal at pH 7.4. Poly-1A did not reduce the cell viability of human gingival fibroblasts and periodontal ligament stem cells for a 1 h incubation.

Antimicrobial Nanostructured Assemblies with Extremely Low Toxicity and Potent Activity to Eradicate Staphylococcus Aureus Biofilms

Self-assembled cationic polymeric nanostructures have been receiving increasing attention for efficient antibacterial agents. In this work, a new type of antibacterial agents is developed by preparing pH-dependent nanostructured assemblies from cationic copolypeptoid poly(N-allylglycine)-b-poly(N-octylglycine) (PNAG-b-PNOG) modified with cysteamine hydrochloride ((PNAG-g-NH₂ )-b-PNOG) driven by crystallization and hydrophobicity of the PNOG blocks. Due to the presence of confined domains arising from crystalline PNOG, persistent spheres and fiber-like assemblies are obtained from the same polymer upon a heating-cooling cycle. This allows for direct comparison of antimicrobial efficiency of nanostructured assemblies with various morphologies that are otherwise similar. Both nanostructured assemblies exhibit extremely low toxicity to human red blood cells, irrespective of the presence of the hydrophobic block. Enhanced antimicrobial performance of the fiber-like micelles compared to the spheres, which result in high selectivity of the fibers, is shown. Notably, the fiber-like micelles show great efficacy in inhibition of the Staphylococcus aureus (S. aureus) biofilm formations and eradication of the mature biofilms, superior to vancomycin. The micelles also show potent in vivo antimicrobial efficacy in a S. aureus infection mouse skin model. With a systematic study, it is demonstrated that both micelles kill the bacteria through a membrane disruption mechanism. These results imply great potential of polypeptoid assemblies as promising excellent candidates for antibacterial treatment and open up new possibilities for the preparation of a new generation of nanostructured antimicrobials.

Shape Matters: Highly Selective Antimicrobial Bottle Brush Copolymers via a One-Pot RAFT Polymerization Approach

The one-pot synthesis of antimicrobial bottle brush copolymers is presented. Reversible addition-fragmentation chain-transfer (RAFT) polymerization is used for the production of the polymeric backbone, as well as for the grafts, which were installed using a grafting-from approach. A combination of N-isopropyl acrylamide and a Boc-protected primary amine-containing acrylamide was used in different compositions. After deprotection, polymers featuring different charge densities were obtained in both linear and bottle brush topologies. Antimicrobial activity was tested against three clinically relevant bacterial strains, and growth inhibition was significantly increased for bottle brush copolymers. Blood compatibility investigations revealed strong hemagglutination for linear copolymers and pronounced hemolysis for bottle brush copolymers. However, one bottle brush copolymer with a 50% charge density revealed strong antibacterial activity and negligible in vitro blood toxicity (regarding hemolysis and hemagglutination tests) resulting in selectivity values as high as 320. Membrane models were used to probe the mechanism of shown polymers that was found to be based on membrane disruption. The trends from bioassays are accurately reflected in model systems indicating that differences in lipid composition might be responsible for selectivity. However, bottle brush copolymers were found to possess increased cytotoxicity against human embryonic kidney (HEK) cells compared with linear analogues. The introduced synthetic platform enables screening of further, previously inaccessible parameters associated with the bottle brush topology, paving the way to further improve their activity profiles.

Changes in Ion Concentrations upon the Binding of Short Polyelectrolytes on Phospholipid Bilayers: Computer Study Addressing Interesting Physiological Consequences

This computer study was inspired by the experimental observation of Y. Qian et al. published in ACS Applied Materials and Interfaces, 2018 that the short positively charged β-peptide chains and their oligomeric analogues efficiently suppress severe medical problems caused by antimicrobial drug-resistant bacteria despite them not penetrating the bacterial membrane. Our coarse-grained molecular dynamics (dissipative particle dynamics) simulations confirm the tentative explanation of the authors of the experimental study that the potent antimicrobial activity is a result of the entropically driven release of divalent ions (mainly magnesium ions essential for the proper biological function of bacteria) into bulk solution upon the electrostatic binding of β-peptides to the bacterial membrane. The study shows that in solutions containing cations Na⁺, Ca²⁺ and Mg²⁺, and anions Cl⁻, the divalent cations preferentially concentrate close to the membrane and neutralize the negative charge. Upon the addition of positively charged oligomer chains (models of β-peptides and their analogues), the oligomers electrostatically bind to the membrane replacing divalent ions, which are released into bulk solvent. Our simulations indicate that the entropy of small ions (which controls the behavior of synthetic polyelectrolyte solutions) plays an important role in this and also in other similar biologically important systems.

Effect of Cationic Groups on the Selectivity of Ternary Antimicrobial Polymers

Antimicrobial polymers (AMPs) have emerged as a promising approach to combat multidrug-resistant pathogens. Developed from binary polymers, which contain cationic and hydrophobic groups, ternary polymers are enhanced by adding neutral hydrophilic monomers to improve their biocompatibility. Cationic groups have attracted significant attention owing to their pivotal role in AMPs. Although many studies have investigated the effect of cationic groups on antimicrobial activity of binary AMPs, there is a lack of comprehensive and systematic evaluation for ternary AMPs. Therefore, a library of 31 statistical amphiphilic ternary polymers containing different cationic groups, including primary amine, guanidine and sulfonium groups was prepared to investigate the impact of cationic groups on antimicrobial activity and biocompatibility. We show that the cationic balance appears to be a critical factor influencing polymers' antibacterial activity and selectivity. Our results reveal that the polymers that have the ratio of the cationic groups ranging between 50-60%, coupled with a cationic/hydrophobic ratio in the range of [1.4-2] and an appropriate neutral hydrophilic/hydrophobic balance, exhibited the highest selectivity toward mammalian cells. Furthermore, selectivity can be improved with suitable cationic moieties and good neutral hydrophilic candidates. In the present study, a lysine-mimicking monomer and PEG chain were the best choices for cationic and hydrophilic sources to develop the most selective AMPs, displaying an impressive selectivity for HC₅₀ and IC₅₀ greater than 83 and 21, respectively. This study elucidates a structure-property-performance relationship for ternary AMPs, which contributes to the development of AMPs capable of selectively targeting gram-negative pathogens. This article is protected by copyright. All rights reserved.

Effects of Hydrophobicity on Antimicrobial Activity, Selectivity, and Functional Mechanism of Guanidinium-Functionalized Polymers

In this study, a series of guanidinium-functionalized polycarbonate random co-polymers is prepared from organocatalytic ring-opening polymerization to investigate the effect of the hydrophobic side chain (ethyl, propyl, isopropyl, benzyl, and hexyl) on their antimicrobial activity and selectivity. Although the polymers exhibit similar minimum inhibitory concentrations, the more hydrophobic polymers exhibit a faster rate of bacteria elimination. At higher percentage content (20 mol%), polymers with more hydrophobic side chains suffer from poor selectivity due to their high hemolytic activity. The highly hydrophobic co-polymer, containing the hydrophobic hexyl-functionalized cyclic carbonate, kills bacteria via a membrane-disruptive mechanism. Micelle formation leads to a lower extent of membrane disruption. This study unravels the effects of hydrophobic side chains on the activities of the polymers and their killing mechanism, providing insights into the design of new antimicrobial polymers.

Antimicrobial Peptides and Macromolecules for Combating Microbial Infections: From Agents to Interfaces

Bacterial resistance caused by the overuse of antibiotics and the shelter of biofilms has evolved into a global health crisis, which drives researchers to continuously explore antimicrobial molecules and strategies to fight against drug-resistant bacteria and biofilm-associated infections. Cationic antimicrobial peptides (AMPs) are considered to be a category of potential alternative for antibiotics owing to their excellent bactericidal potency and lesser likelihood of inducing drug resistance through their distinctive antimicrobial mechanisms. In this review, the hitherto reported plentiful action modes of AMPs are systematically classified into 15 types and three categories (membrane destructive, nondestructive membrane disturbance, and intracellular targeting mechanisms). Besides natural AMPs, cationic polypeptides, synthetic polymers, and biopolymers enable to achieve tunable antimicrobial properties by optimizing their structures. Subsequently, the applications of these cationic antimicrobial agents at the biointerface as contact-active surface coatings and multifunctional wound dressings are also emphasized here. At last, we provide our perspectives on the development of clinically significant cationic antimicrobials and related challenges in the translation of these materials.

Cationic amphiphilic dendrons with effective antibacterial performance

Bacterial infections and antibiotic resistance have become a global healthcare crisis. Herein, we designed and synthesized a series of cationic amphiphilic dendrons with cationic dendrons and hydrophobic alkyl chains for potential antibacterial applications. Our results showed that the antimicrobial activities of the cationic amphiphilic dendrons were highly dependent upon the length of the hydrophobic alkyl chain, whereas the number of cationic charges was less important. Among these cationic amphiphilic dendrons, a prime candidate was identified, which possessed excellent antimicrobial activity against various pathogens (minimum inhibitory concentrations of 9, 3, and 3 μg mL^-1 for Escherichia coli, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus, respectively). Scanning electron microscopy and fluorescence microscopy analyses showed that it could disrupt the integrity of a pathogen's membrane, leading to cell lysis and death. In addition, in vitro bacteria-killing kinetics showed that it had rapid bactericidal efficiency. It also had excellent antimicrobial activities against MRSA in vivo and promoted wound healing. In general, the synthesized cationic amphiphilic dendrons, which exhibited rapid and broad-spectrum bactericidal activity, may have great potential in antimicrobial applications.

Antimicrobial Mechanisms of Biomaterials: From Macro to Nano

Overcoming the global concern of antibiotic resistance is one of the biggest challenge faced by scientists today and the key to tackle this issue of emerging infectious diseases is the...

Bioactive Synthetic Polymers

Synthetic polymers are omnipresent in society as textiles and packaging materials, in construction and medicine, among many other important applications. Alternatively, natural polymers play a crucial role in sustaining life and allowing organisms to adapt to their environments by performing key biological functions such as molecular recognition and transmission of genetic information. In general, the synthetic and natural polymer worlds are completely separated due to the inability for synthetic polymers to perform specific biological functions; in some cases, synthetic polymers cause uncontrolled and unwanted biological responses. However, owing to the advancement of synthetic polymerization techniques in recent years, new synthetic polymers have emerged that provide specific biological functions such as targeted molecular recognition of peptides, or present antiviral, anticancer, and antimicrobial activities. In this review, the emergence of this generation of bioactive synthetic polymers and their bioapplications are summarized. Finally, the future opportunities in this area are discussed.

Optimal Balance of Hydrophobic Content and Degree of Polymerization Results in a Potent Membrane-Targeting Antibacterial Polymer

Globally, excessive use of antibiotics has drastically raised the resistance frequency of disease-causing microorganisms among humans, leading to a scarcity of efficient and biocompatible drugs. Antimicrobial polymers have emerged as a promising candidate to combat drug-resistance pathogens. Along with the amphiphilic balance, structural conformation and molecular weight (M _n) play an indispensable role in the antimicrobial potency and cytotoxic activity of polymers. Here, we synthesize cationic and amphiphilic methacrylamide random copolymers using free-radical copolymerization. The mole fraction of the hydrophobic groups is kept constant at approximately 20%, while the molecular weight (average number of linked polymeric units) is varied and the antibacterial and cytotoxic activities are studied. The chemical composition of the copolymers is characterized by ¹H NMR spectroscopy. We observe that the average number of linked units in a polymer chain (i.e., molecular weight) significantly affects the polymer activity and selectivity. The antibacterial efficacy against both of the examined bacteria, Escherichia coli and Staphylococcus aureus, increases with increasing molecular weight. The bactericidal activity of polymers is confirmed by live/dead cell viability assay. Polymers with high molecular weight display high antibacterial activity, yet are highly cytotoxic even at 1 × MIC. However, low-molecular-weight polymers are biocompatible while retaining antibacterial potency. Furthermore, no resistance acquisition is observed against the polymers in E. coli and S. aureus. A comprehensive analysis using confocal and scanning electron microscopy (SEM) techniques shows that the polymers target bacterial membranes, resulting in membrane permeabilization that leads to cell death.

Synthetic Mimics of Antimicrobial Peptides for the Targeted Therapy of Multidrug-Resistant Bacterial Infection

Antibacterial materials are highly demanded in treatment of bacterial infection, especially severe ones with multidrug-resistance. Herein, pH-responsive polypeptide, i.e., poly-L-lysine modified by 1-(propylthio)acetic acid-3-octylimidazolium and citraconic anhydride (PLL-POIM-CA), is synthesized by post-polymerization modification of poly-L-lysine (PLL) with 1-(propylthio)acetic acid-3-octylimidazolium (POIM) and citraconic anhydride (CA). It is observed that PLL-POIM-CA is stable under normal physiological condition, while CA cleaves rapidly at weakly acidic environment like bacterial infectious sites. The hydrolyzed PLL-POIM-CA exhibits excellent broad-spectrum antibacterial activities against Gram-negative bacteria of Escherichia coli and Gram-positive bacteria of Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA). In particular, the minimum inhibitory concentration (MIC) against multidrug-resistant bacteria like MRSA is as low as 7.8 µg mL^-1 . Moreover, PLL-POIM-CA exhibits good biocompatibility with mouse fibroblast cells (L929) in vitro and improved hemocompatibility with an HC₅₀ exceeding 5000 µg mL^-1 . Therefore, PLL-POIM-CA displays an excellent bacteria versus cells selectivity (HC₅₀ /MIC) over 534, which is 53 times higher than natural antimicrobial peptide of indolicidin. It is further demonstrated in vivo that the antimicrobial polypeptide effectively accelerates MRSA-infected wound healing by relieving local inflammatory response. Therefore, this targeted antimicrobial polypeptide has broad application prospects for the treatment of multidrug-resistant bacterial infection.

Development of Poloxamer Hydrogels Containing Antibacterial Guanidine-Based Polymers for Healing of Full-Thickness Skin Wound

A series of hydrogels containing guanidine-based polymers using a poloxamer as the matrix were prepared to provide novel wound dressings with antibacterial and repairing-promotion properties for skin wounds. Herein, we developed a series of antibacterial hydrogels, the cationic guanidine-based polymer polyhexamethylene guanidine hydrochloride (PHMG) with poloxamer aqueous solution (12%, w/w) simplified as PHMGP, chitosan (CS)-cross-linked PHMG (referred to as PHMC) with poloxamer aqueous solution simplified as PHMCP, and hyaluronic acid (HA)-modified PHMG (referred to as PHMH) with poloxamer aqueous solution simplified as PHMHP, for enhancing full-thickness skin wound healing. The characterizations, antimicrobial activity, cytotoxicity, and in vivo full-thickness wound-healing capability of these hydrogels were analyzed and evaluated. The results show that though PHMGP possesses great bactericide properties, its cytotoxicity is too strong to support skin regeneration. However, after modified with CS or HA, PHMCP and PHMHP showed good biocompatibility and antimicrobial properties against Gram-positive and Gram-negative bacteria that are commonly present in injured skin. Both PHMCP and PHMHP hydrogels exhibited upgraded wound-healing efficiency in full-thickness skin defects, characterized by a shorter wound closure time, faster re-regeneration, and the earlier formation of skin appendages, compared with those of control or pure poloxamer treatments. Their biological mechanism was detected. Both PHMCP and PHMHP can regulate the related biofactors during the skin repair process such as interleukin-1β (IL-1β), interleukin-6 (IL-6), transforming growth factor beta-1(TGF-β1), alpha-smooth muscle actin (α-SMA), and vascular endothelial growth factor, to promote wound healing with less serious scarring. In short, hydrogels with excellent capabilities to inhibit microorganism infection and promote wound healing were developed, which will shed light on designing and producing wound dressings with promising applications in future.

Membrane-disruptive peptides/peptidomimetics-based therapeutics: Promising systems to combat bacteria and cancer in the drug-resistant era

Membrane-disruptive peptides/peptidomimetics (MDPs) are antimicrobials or anticarcinogens that present a general killing mechanism through the physical disruption of cell membranes, in contrast to conventional chemotherapeutic drugs, which act on precise targets such as DNA or specific enzymes. Owing to their rapid action, broad-spectrum activity, and mechanisms of action that potentially hinder the development of resistance, MDPs have been increasingly considered as future therapeutics in the drug-resistant era. Recently, growing experimental evidence has demonstrated that MDPs can also be utilized as adjuvants to enhance the therapeutic effects of other agents. In this review, we evaluate the literature around the broad-spectrum antimicrobial properties and anticancer activity of MDPs, and summarize the current development and mechanisms of MDPs alone or in combination with other agents. Notably, this review highlights recent advances in the design of various MDP-based drug delivery systems that can improve the therapeutic effect of MDPs, minimize side effects, and promote the co-delivery of multiple chemotherapeutics, for more efficient antimicrobial and anticancer therapy.

Mechanistic Study of Membrane Disruption by Antimicrobial Methacrylate Random Copolymers by the Single Giant Vesicle Method

Cationic amphiphilic polymers have been a platform to create new antimicrobial materials that act by disrupting bacterial cell membranes. While activity characterization and chemical optimization have been done in numerous studies, there remains a gap in our knowledge on the antimicrobial mechanisms of the polymers, which is needed to connect their chemical structures and biological activities. To that end, we used a single giant unilamellar vesicle (GUV) method to identify the membrane-disrupting mechanism of methacrylate random copolymers. The copolymers consist of random sequences of aminoethyl methacrylate and methyl (MMA) or butyl (BMA) methacrylate, with low molecular weights of 1600-2100 g·mol^-1. GUVs consisting of an 8:2 mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol), sodium salt (POPG) and those with only 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) were prepared to mimic the bacterial (Escherichia coli) or mammalian membranes, respectively. The disruption of bacteria and mammalian cell membrane-mimetic lipid bilayers in GUVs reflected the antimicrobial and hemolytic activities of the copolymers, suggesting that the copolymers act by disrupting cell membranes. The copolymer with BMA formed pores in the lipid bilayer, while that with MMA caused GUVs to burst. Therefore, we propose that the mechanism is inherent to the chemical identity or properties of hydrophobic groups. The copolymer with MMA showed characteristic sigmoid curves of the time course of GUV burst. We propose a new kinetic model with a positive feedback loop in the insertion of the polymer chains in the lipid bilayer. The novel finding of alkyl-dependent membrane-disrupting mechanisms will provide a new insight into the role of hydrophobic groups in the optimization strategy for antimicrobial activity and selectivity.

Influence of lipid bilayer composition on the activity of antimicrobial quaternary ammonium ionenes, the interplay of intrinsic lipid curvature and polymer hydrophobicity, the role of cardiolipin

Incorporation of hydrophobic component into amphiphilic polycations structure is frequently accompanied by an increase of antimicrobial activity. There is, however, a group of relatively hydrophilic polycations containing quaternary ammonium moieties along mainchain, ionenes, which also display strong antimicrobial and limited hemolytic properties. In this work, an influence of a hydrophobic side group length on antimicrobial mechanism of action is investigated in a series of novel amphiphilic ionenes. High antimicrobial activity was found by determination of minimum inhibitory concentration (MIC) and minimum bactericidal, and fungicidal concentration (MBC and MFC) in both growth media and a buffer. Biocompatibility was estimated by hemolytic and mammalian cells viability assays. Mechanistic studies were performed using large unilamellar vesicles (LUVs) with different lipid composition, as simplified models of cell membranes. The investigated ionenes are potent and selective antimicrobial molecules displaying a decrease of antimicrobial activity correlated with increase of hydrophobicity. Studies using LUVs revealed that the cardiolipin is an essential component responsible for the lipid bilayer permeabilization by investigated ionens. In contrast to relatively hydrophilic ionenes, more hydrophobic polymers showed an ability to stabilize membranes composed of lipids with negative spontaneous curvature in a certain range of polymer to lipid ratio. The results substantially contribute to the understanding of antimicrobial activity of the investigated class of polymers.

The function of peptide-mimetic anionic groups and salt bridges in the antimicrobial activity and conformation of cationic amphiphilic copolymers

Herein we report the synthesis of ternary statistical methacrylate copolymers comprising cationic ammonium (amino-ethyl methacrylate: AEMA), carboxylic acid (propanoic acid methacrylate: PAMA) and hydrophobic (ethyl methacrylate: EMA) side chain monomers, to study the functional role of anionic groups on their antimicrobial and hemolytic activities as well as the conformation of polymer chains. The hydrophobic monomer EMA was maintained at 40 mol% in all the polymers, with different percentages of cationic ammonium (AEMA) and anionic carboxylate (PAMA) side chains, resulting in different total net charge for the polymers. The antimicrobial and hemolytic activities of the copolymer were determined by the net charge of +3 or larger, suggesting that there was no distinct effect of the anionic carboxylate groups on the antimicrobial and hemolytic activities of the copolymers. However, the pH titration and atomic molecular dynamics simulations suggest that anionic groups may play a strong role in controlling the polymer conformation. This was achieved via formation of salt bridges between cationic and anionic groups, transiently crosslinking the polymer chain allowing dynamic switching between compact and extended conformations. These results suggest that inclusion of functional groups in general, other than the canonical hydrophobic and cationic groups in antimicrobial agents, may have broader implications in acquiring functional structures required for adequate antimicrobial activity. In order to explain the implications, we propose a molecular model in which formation of intra-chain, transient salt bridges, due to the presence of both anionic and cationic groups along the polymer, may function as "adhesives" which facilitate compact packing of the polymer chain to enable functional group interaction but without rigidly locking down the overall polymer structure, which may adversely affect their functional roles.

Effect of Non-natural Hydrophobic Amino Acids on the Efficacy and Properties of the Antimicrobial Peptide C18G

Antimicrobial peptides (AMPs) have been an area of great interest, due to the high selectivity of these molecules toward bacterial targets over host cells and the limited development of bacterial resistance to these molecules through evolution. The peptides are known to selectively bind to bacterial cell surfaces through electrostatic interactions, and subsequently, the peptides insert into the cell membrane and cause local disruptions of membrane integrity leading to cell death. Previous experiments showed that replacing the Leu residues in the AMP C18G with other naturally occurring hydrophobic residues resulted in side-chain-dependent activities. This work extends the investigation to non-natural hydrophobic amino acids and the effect on peptide activity. Minimal inhibitory concentration (MIC) results demonstrated that amino acid substitutions containing long flexible carbon chains maintained or increased antimicrobial activity compared to natural analogues. In solution, the peptide showed aggregation only with the most hydrophobic non-natural amino acid substitutions. Binding assays using Trp fluorescence confirm a binding preference for anionic lipids while quenching experiments demonstrated that the more hydrophobic peptides are more deeply buried in the anionic lipid bilayers compared to the zwitterionic bilayers. The most effective peptides at killing bacteria were also those which showed some level of disruption of bacterial membranes; however, one peptide sequence exhibited very strong activity and very low levels of red blood cell hemolysis, yielding a promising target for future development.

Methacrylamide based antibiotic polymers with no detectable bacterial resistance

The growing number of multidrug-resistant pathogens is a major healthcare concern. In search of alternatives to antibiotics, synthetic mimics of antimicrobial peptides (SMAMPs) in the form of antimicrobial polymers have gained tremendous attention. Here, we report the synthesis of a set of 7 amphiphilic water-soluble cationic copolymers using aminopropyl methacrylamide and benzyl methacrylamide repeat units that show significant antibacterial activity. The antibacterial activity was evaluated using a broth microdilution assay against S. aureus and E. coli, while toxicity to mammalian cells was quantified by hemolysis assay with human red blood cells (RBCs). We find that the antibacterial activity and selectivity of the polymers depends on the mole fraction of aromatic benzyl units (f_benzyl) and the average molecular weight (M_n). Polymers with f_benzyl of 0.10 and 0.19, named AB-10 and AB-19 respectively, exhibited the highest antibacterial efficacy without inducing hemolysis and were chosen for further study. Liposome dye leakage study and observations from confocal and scanning electron microscopy indicate that the AB polymers killed bacterial cells primarily by disrupting the cytoplasmic membrane. No resistant mutants of E. coli and S. aureus were obtained with AB-19 in a 30 day serial passage study.

Synthetic Biomimetic Polymethacrylates: Promising Platform for the Design of Anti-Cyanobacterial and Anti-Algal Agents

Extensive, uncontrolled growth of algae and cyanobacteria is an environmental, public health, economic, and technical issue in managing natural and engineered water systems. Synthetic biomimetic polymers have been almost exclusively considered antimicrobial alternatives to conventional antibiotics to treat human bacterial infections. Very little is known about their applicability in an aquatic environment. Here, we introduce synthetic biomimetic polymethacrylates (SBPs) as a cost-effective and chemically facile, flexible platform for designing a new type of agent suitable for controlling and mitigating photosynthetic microorganisms. Since SBPs are cationic and membranolytic in heterotrophic bacteria, we hypothesized they could also interact with negatively charged cyanobacterial or algal cell walls and membranes. We demonstrated that SBPs inhibited the growth of aquatic photosynthetic organisms of concern, i.e., cyanobacteria (Microcystis aeruginosa and Synechococcus elongatus) and green algae (Chlamydomonas reinhardtii and Desmodesmus quadricauda), with 50% effective growth-inhibiting concentrations ranging between 95 nM and 6.5 μM. Additionally, SBPs exhibited algicidal effects on C. reinhardtii and cyanocidal effects on picocyanobacterium S. elongatus and microcystin-producing cyanobacterium M. aeruginosa. SBP copolymers, particularly those with moderate hydrophobic content, induced more potent cyanostatic and cyanocidal effects than homopolymers. Thus, biomimetic polymers are a promising platform for the design of anti-cyanobacterial and anti-algal agents for water treatment.

Effect of alkyl chain length and fluorine content on the surface characteristics and antibacterial activity of surfaces grafted with brushes containing quaternized ammonium and fluoro-containing monomers

Although considerable efforts have been made to vary the alkyl chain length in the quaternary ammonium compounds (QACs) for optimizing the antibacterial activity, only few researchers have systematically investigated the combinatory effects of alkyl chain length and another acryl monomers with the different chemical configuration on the antibacterial activity of the modified substrate. In this study, by surface grafting of various copolymeric brushes, different modified cotton substrates were prepared by surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization reaction for exploring the effects of alkyl chain length of QACs and the fluorine content on antibacterial and anti-microbial adhesion characteristics. The quaternized monomers used were prepared by quaternization of 2-(dimethylamino) ethyl methacrylate (DMAEMA) with 1-bromooctane (DMAEMA + 8), and 1-bromopropane (DMAEMA + 3). The fluoro-containing monomer was 2,2,2-Trifluoroethyl methacrylate (TFEMA). Ethyl methacrylate (EMA) was also used for comparison. Results have shown that the optimal antibacterial and anti-microbial adhesion characteristics were noted on the substrates grafted with DMAEMA + 8 and TFEMA. This can be attributed to the enhanced degree of surface quaternization due to the hydrophobic interactions between the grafted TFEMA and DMAEMA + 8 chains, leading to an increase in antibacterial efficacy of modified cotton substrates.

Recent advances in design of antimicrobial peptides and polypeptides toward clinical translation

The recent outbreaks of infectious diseases caused by multidrug-resistant pathogens have sounded a piercing alarm for the need of new effective antimicrobial agents to guard public health. Among different types of candidates, antimicrobial peptides (AMPs) and the synthetic mimics of AMPs (SMAMPs) have attracted significant enthusiasm in the past thirty years, due to their unique membrane-active antimicrobial mechanism and broad-spectrum antimicrobial activity. The extensive research has brought many drug candidates into clinical and pre-clinical development. Despite tremendous progresses have been made, several major challenges inherent to current design strategies have slowed down the clinical translational development of AMPs and SMAMPs. However, these challenges also triggered many efforts to redesign and repurpose AMPs. In this review, we will first give an overview on AMPs and their synthetic mimics, and then discuss the current status of their clinical translation. Finally, the recent advances in redesign and repurposing AMPs and SMAMPs are highlighted.

A series of carboxymethyl cellulose-based antimicrobial peptide mimics were synthesized for antimicrobial applications

Inspired by antimicrobial peptides (AMP) which could alleviate drug resistance pressure, antimicrobial peptide mimics (AMPMs) were designed timely. Here, carboxymethyl cellulose (CMC) -based AMPMs were constructed by introducing different diamines on CMC effectively. Firstly, CMC was degraded to be oligomers with different molecular weights, followed by amination reactions with different diamines respectively. After protonation, a series of AMPMs with different structures were synthesized successfully. Their antibacterial effect has been evaluated by dynamic growth curves and microdilution method. The images snapped by the confocal laser scanning microscope and transmission electron microscope have fully proved its great lethality. And the antibacterial mechanism measured by flow cytometry analysis and zeta potential detection demonstrated that the destruction of membrane potential leads to bacteria death. The excellent blood compatibility and negligible drug resistance has also been confirmed. In addition, the synthesis method is simple and environmental-friendly.

Diverse Impacts on Prokaryotic and Eukaryotic Membrane Activities from Hydrophobic Subunit Variation Among Nylon-3 Copolymers

Synthetic, sequence-random polymers that feature a wide range of backbone and side chain structures have been reported to function as mimics of natural host-defense peptides, inhibiting bacterial growth while exerting little or no toxicity toward eukaryotic cells. The common themes among these materials are net positive charge, which is thought to confer preferential action toward prokaryotic vs eukaryotic cells, and the presence of hydrophobic components, which are thought to mediate membrane disruption. This study is based on a set of new binary cationic-hydrophobic nylon-3 copolymers that was designed to ask whether factors beyond net charge and net hydrophobicity influence the biological activity profile. In previous work, we found that nonpolar subunits preorganized by a ring led to copolymers with a diminished tendency to disrupt human cell membranes (as measured via lysis of red blood cells) relative to copolymers containing more flexible nonpolar subunits. An alternative mode of conformational restriction, involving geminal substitution, also minimized hemolysis. Here, we asked whether combining a cyclic constraint and geminal substitution would be synergistic; the combination was achieved by introducing backbone methyl groups to previously described cyclopentyl and cyclohexyl subunits. The new cyclic subunits containing two quaternary backbone carbons (i.e, two sites of geminal substitution) were comparable or slightly superior in terms of antibacterial potency but markedly superior in terms of low hemolytic activity, relative to cyclic subunits lacking the quaternary carbons. However, new cyclic units containing only one quaternary carbon were very hemolytic, which was unanticipated. Variations in net hydrophobicity cannot explain the trend in hemolysis, in contrast to the standard perspective in this field. The impact of each new polymer on live E. coli cells was evaluated via fluorescence microscopy. All new polymers moved rapidly across the outer membrane without large-scale disruption of barrier function. Increasing the number of quaternary carbons in the nonpolar subunit correlated with an increased propensity to permeabilize the cytoplasmic membrane of E. coli cells. Collectively, these findings show that relationships between nonpolar subunit identity and biological activity are influenced by factors in addition to hydrophobicity and charge. We propose that the variation of subunit conformational properties may be one such factor.

Antibacterial Amphiphilic Copolymers of Dimethylamino Ethyl Methacrylate and Methyl Methacrylate to Control Biofilm Adhesion for Antifouling Applications

Amphiphilic copolymers are recognized as important biomaterials and used as antibacterial agents due to their effective inhibition of bacterial growth. In current study, the amphiphilic copolymers of P(DMAEMA-co-MMA) were synthesized using free radical polymerization by varying the concentrations of hydrophilic monomer 2-dimethylamino ethylmethacrylate (DMAEMA) and hydrophobic monomer methyl methacrylate (MMA) having PDI value of 1.65-1.93. The DMAEMA monomer, through ternary amine with antibacterial property optimized copolymers, P(DMAEMA-co-MMA), compositions to control biofilm adhesion. Antibacterial activity of synthesized copolymers was elucidated against Gram-positive Staphylococcus aureus (ATCC 6538) and Gram-negative Escherchia coli (ATCC 8739) by disk diffusion method, and zones of inhibition were measured. The desired composition that was PDM1 copolymer had shown good zones of inhibition i.e., 19 ± 0.33 mm and 20 ± 0.33 mm for E. coli and S. aureus respectively. The PDM1 and PDM2 have exhibited significant control over bacterial biofilm adhesion as tested by six well plate method. SEM study of bacterial biofilm formation has illustrated that these copolymers act in a similar fashion like cationic biocide. These compositions viz. PDM1 and PDM2, may be useful in development of bioreactors, sensors, surgical equipment and drug delivery devices.

Biobased polymers derived from itaconic acid bearing clickable groups with potent antibacterial activity and negligible hemolytic activity

We report the synthesis of new biobased polymers derived from itaconic acid with excellent antibacterial activity against Gram-positive bacteria and very low hemotoxicity.

Effect of hydrophilic groups on the bioactivity of antimicrobial polymers

Antimicrobial polymers have recently been investigated as potential treatments to combat multidrug-resistant pathogens.

Quaternary Lipophilic Chitosan and Gelatin Cross-Linked Antibacterial Hydrogel Effectively Kills Multidrug-Resistant Bacteria with Minimal Toxicity toward Mammalian Cells

Wounds or tissue openings in the skin are susceptible to bacterial attack, which can deteriorate and slow down the healing process. In this regard, antimicrobial gels are valuable as they mitigate the infection spread and assist in the healing. Despite the success, commercially available release-active antimicrobial gels suffer from narrow-spectrum activity, resistance induction, reservoir exhaustion, and in some cases may be associated with toxicity. To circumvent these limitations, herein, we have developed new quaternary lipophilic chitosan derivatives (QuaChi) synthesized by modifying the primary alcohol of the sugar moieties without altering the free amino groups of glucosamines. Compared to protonated chitosan, the synthesized derivatives exhibited improved water solubility and enhanced antibacterial activity against multidrug-resistant Gram-positive and Gram-negative bacteria including clinical isolates. The enhanced antibacterial activity was evident from the bacterial membrane depolarization leading to rapid inactivation of ∼10⁵-10⁶ bacterial cells within 2 h. The applicability of the chitosan derivatives was further demonstrated by developing antibacterial hydrogels by cross-linking the free amino groups of QuaChi with biocompatible gelatin through amide linkages. The hydrogel showed ∼5-7 log reduction of various multidrug-resistant bacteria including the stationary-phase cells within 6 h. Scanning electron microscopy revealed the loss of integrity of the bacterial structure when treated with the hydrogel, whereas mammalian cells (human embryonic kidney-293 (HEK-293)), when exposed to the hydrogel, appeared to be healthy with retained morphology. Collectively, these findings suggest that the developed hydrogel formulation can find potential applications to combat notorious drug-resistant bacterial infections in the healthcare settings.

Chemical Hydrogels Bearing Thiazolium Groups with a Broad Spectrum of Antimicrobial Behavior

Several hydrogels based on 2-hydroxyethyl methacrylate and a methacrylic monomer containing a thiazole group in its lateral chain have been prepared by thermal polymerization at 60 °C in water solution varying the chemical composition of the gels. The posterior quaternization of the thiazole groups with methyl iodine has rendered positively charged hydrogels with potential antimicrobial activity. This modification has been structurally characterized by infrared spectroscopy, whereas the thermal stability of all hydrogels has been studied by thermal degradation in inert atmosphere. The swelling behavior in distilled water and the rheology of the different hydrogels have been analyzed as a function of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) monomer content as well as its methylation. Finally, the active character of hydrogels against Gram-positive and Gram-negative bacteria and fungi has been evaluated, revealing excellent antimicrobial activity against all tested microorganisms. The methylated hydrogels could be used as potential materials for wound healing or contact lens applications.

Screening and Matching Amphiphilic Cationic Polymers for Efficient Antibiosis

The amphiphilic cationic polymers that mimic antimicrobial peptides have received increasing attention due to their excellent antibacterial activity. However, the relationship between the structure of cationic polymers and its antibacterial effect remains unclear. In our current work, a series of PEG blocked amphiphilic cationic polymers composed of hydrophobic alkyl-modified and quaternary ammonium salt (QAS) moieties have been prepared. The structure-antibacterial activity relationship of these cationic polymers was investigated against E. coli and S. aureus, including PEGylation, random structure, molecular weights, and the content and lengths of the hydrophobic alkyl side chains. The results indicated that PEGylated random amphiphilic cationic copolymer (mPB₃₅/T₅₇) showed stronger antibacterial activity and better biocompatibility than the random copolymer without PEG (PB₃₃/T₅₆). Furthermore, mPB₃₅/T₅₇ with appropriate mole fraction of alkyl side chains (f_alkyl = 0.38), degree of polymerization (DP = 92), and four-carbon hydrophobic alkyl moieties was found to have the optimal structure that revealed the best antibacterial activities against both E. coli (MIC = 8 μg/mL, selectivity > 250) and S. aureus (MIC = 4 μg/mL, selectivity > 500). More importantly, mPB₃₅/T₅₇ could effectively eradicate E. coli biofilms by killing the bacteria embedded in the biofilms. Therefore, the structure of mPB₃₅/T₅₇ provided valuable information for improving the antibacterial activity of cationic polymers.