Degradation of pesticides in a continuous-flow two-phase microemulsion reactor

Stabilization of organophosphorus hydrolase by entrapment in silk fibroin: formation of a robust enzymatic material suitable for surface coatings

Organophosphates are some of the most acutely toxic compounds synthesized on an industrial scale, and organophosphorus hydrolase (OPH) has the ability to hydrolyze and inactivate a number of these chemicals. However, OPH activity is vulnerable to harsh environmental conditions that would accompany its practical utility in the field; a limitation that can also be extended to conditions required for incorporation of OPH into useful materials. Here we present evidence that entrapment of OPH in silk fibroin leads to stabilization of OPH activity under a variety of conditions that would otherwise reduce free enzyme activity, such as elevated temperature, UV light exposure and the presence of detergent. Silk fibroin entrapment of OPH also allowed for its dispersal into a polyurethane-based coating that retained organophosphate hydrolysis activity after formulation, application and drying. Together, the data presented here demonstrate the utility of silk fibroin entrapment for the protection of OPH activity under a variety of environmental conditions.

Dye Decolorization by Manganese Peroxidase in an Enzymatic Membrane Bioreactor

In the present work an enzymatic membrane reactor (EMR) for the oxidation of azo dyes by manganese peroxidase (MnP) has been developed. The configuration consisted of a stirred tank reactor coupled with an ultrafiltration membrane. The membrane allowed for most of the enzymatic activity to be recovered while both the parent dye and the degradation products could pass through. Different operational strategies (batch, fed-batch, and continuous) and parameters such as enzyme activity, H(2)O(2) feeding rate, hydraulic retention time (in continuous operation), and dye loading rate were studied. At best conditions, a continuous operation with a dye decolorization higher than 85% and minimal enzymatic deactivation was feasible for 18 days, attaining an efficiency of 42.5 mg Orange II oxidized/MnP unit consumed.

Modeling evaluation of carbaryl degradation in a continuously stirred tank reactor by anodic fenton treatment

Anodic Fenton treatment (AFT) has been shown to be effective in removing pesticides from aqueous solution in batch reactors with the formation of less toxic and more biodegradable products. To facilitate practical application of AFT, carbaryl degradation in a continuously stirred tank reactor (CSTR) by AFT was investigated under different experimental conditions, such as carbaryl inlet concentration, Fenton reagent concentration/ratio, and carbaryl feeding flow rate. A higher Fe2+ delivery rate and H2O2 to Fe2+ ratio (H2O2:Fe2+) were found to favor the carbaryl degradation process, whereas flow rate was shown to be a much less significant factor to influence the degradation rate under the evaluated experimental conditions. A kinetic-based semiempirical model was developed to simulate the experimental data, and a very good fit between the model and the raw data was found (R2 > 0.99). A dimensionless parameter (k/q2) was found to be a good indicator of the degradation rate; that is, the higher the k/q2value is, the faster the degradation process is. The rate parameter (k) can be used to evaluate the degradation rate when the flow rate is invariant for a given pesticide. The shape parameter (beta) is most likely related to the availability and reactivity of Fenton reagents and hydroxyl radicals. To compare the degradation rate of different pesticides, more information other than k/q2, k, and beta values, such as the instantaneous degradation rate vs time relationship, needs to be considered.

Reverse micelles and protein biotechnology

Reverse micelles are nanometer-sized (1-10 nm) water droplets dispersed in organic media obtained by the action of surfactants. Surfactant molecules organize with the polar part to the inner side able to solubilize water and the apolar part in contact with the organic solvent. Proteins can be solubilized in the water pool of reverse micelles. Studies on the structure-function relationships of proteins in reverse micelles are very important since the microenvironment in which the protein is solubilized has physico-chemical properties distinct from a bulk aqueous solution. Some of the unique characteristics of reverse micelles make them very useful for biotechnological applications. Charge and hydrophilic/hydrophobic characteristics of the protein and the selection of surfactant can be used to achieve selective solubilization of proteins. This has been used to extend the classical liquid-liquid extraction with solvents to protein bioseparation. For biocatalysis the presence of a bulk organic solvent allow synthetic reactions to be performed via the control of water content and the solubilization of hydrophobic substrates. This is accomplished with a higher interfacial area (about 100 m2/mL) than the conventional biphasic systems, minimizing mass transfer problems.