Quantum Dynamical Approach to Ultrafast Molecular Desorption from Surfaces

Understanding the Photoinduced Desorption and Oxidation of CO on Ru(0001) Using a Neural Network Potential Energy Surface

The study of ultrafast photoinduced dynamics of adsorbates on metal surfaces requires thorough investigation of laser-excited electrons and, in many cases, the highly excited surface lattice. While ab initio molecular dynamics with electronic friction and thermostats (Te, Tl)-AIMDEF addresses such complex modeling, it imposes severe computational costs, hindering quantitative comparison with experimental desorption probabilities. In order to bypass this limitation, we utilize the embedded atom neural network method to construct a potential energy surface (PES) for the coadsorption of CO and O on Ru(0001). Our results demonstrate that this PES not only reproduces the short-time ab initio dynamics but is also able to yield statistically significant data for long lasting trajectories that correlate well with experimental findings. Furthermore, the analysis of the laser-induced dynamics reveals the existence of a dynamic trapping state that acts as a precursor for CO desorption, and it is not observed under thermal conditions. Altogether, our results validate the underlying theoretical framework, providing robust support for the description of not only the photoinduced desorption but also the oxidation of CO in terms of nonequilibrated but thermal hot electrons and phonons.

Photomolecular effect: Visible light interaction with air-water interface

Although water is almost transparent to visible light, we demonstrate that the air-water interface interacts strongly with visible light via what we hypothesize as the photomolecular effect. In this effect, transverse-magnetic polarized photons cleave off water clusters from the air-water interface. We use 14 different experiments to demonstrate the existence of this effect and its dependence on the wavelength, incident angle, and polarization of visible light. We further demonstrate that visible light heats up thin fogs, suggesting that this process can impact weather, climate, and the earth's water cycle and that it provides a mechanism to resolve the long-standing puzzle of larger measured clouds absorption to solar radiation than theory could predict based on bulk water optical constants. Our study suggests that the photomolecular effect should happen widely in nature, from clouds to fogs, ocean to soil surfaces, and plant transpiration and can also lead to applications in energy and clean water.

Multicoverage Study of Femtosecond Laser-Induced Desorption of CO from Pd(111)

We study the strong coverage dependence of the femtosecond laser-induced desorption of CO from Pd(111) using molecular dynamics simulations that consistently include the effect of the laser-induced hot electrons on both the adsorbates and surface atoms. Adiabatic forces are obtained from a multicoverage neural network potential energy surface that we construct using data from density functional theory calculations for 0.33 and 0.75 monolayer (ML). Our molecular dynamics simulations performed for these two trained coverages and an additional intermediate coverage of 0.60 ML reproduce well the peculiarities of the experimental findings. The performed simulations also permit us to disentangle the relative role played by the excited electrons and phonons on the desorption process and discover interesting properties of the reaction dynamics as the relevance that the precursor physisorption well acquires during the dynamics as coverage increases.

Disentangling the role of electrons and phonons in the photoinduced CO desorption and CO oxidation on (O,CO)-Ru(0001)

The role played by electronic and phononic excitations in the femtosecond laser induced desorption and oxidation of CO coadsorbed with O on Ru(0001) is investigated using ab initio molecular dynamics with electronic friction. To this aim, simulations that account for both kind of excitations and that only consider electronic excitations are performed. Results for three different surface coverages are obtained. We unequivocally demonstrate that CO desorption is governed by phononic excitations. In the case of oxidation the low statistics does not allow to give a categorical answer. However, the analysis of the adsorbates kinetic energy gain and displacements strongly suggest that phononic excitations and surface distortion also play an important role in the oxidation process.

Why Ultrafast Photoinduced CO Desorption Dominates over Oxidation on Ru(0001)

CO oxidation on Ru(0001) is a long-standing example of a reaction that, being thermally forbidden in ultrahigh vacuum, can be activated by femtosecond laser pulses. In spite of its relevance, the precise dynamics of the photoinduced oxidation process as well as the reasons behind the dominant role of the competing CO photodesorption remain unclear. Here we use ab initio molecular dynamics with electronic friction that account for the highly excited and nonequilibrated system created by the laser to investigate both reactions. Our simulations successfully reproduce the main experimental findings: the existence of photoinduced oxidation and desorption, the large desorption to oxidation branching ratio, and the changes in the O K-edge X-ray absorption spectra attributed to the initial stage of the oxidation process. Now, we are able to monitor in detail the ultrafast CO desorption and CO oxidation occurring in the highly excited system and to disentangle what causes the unexpected inertness to the otherwise energetically favored oxidation.

Time-dependent density functional theory calculations of electronic friction in non-homogeneous media

The excitation of low-energy electron-hole pairs is one of the most relevant processes in the gas-surface interaction. An efficient tool to account for these excitations in simulations of atomic and molecular dynamics at surfaces is the so-called local density friction approximation (LDFA). The LDFA is based on a strong approximation that simplifies the dynamics of the electronic system: a local friction coefficient is defined using the value of the electronic density for the unperturbed system at each point of the dynamics. In this work, we apply real-time time-dependent density functional theory to the problem of the electronic friction of a negative point charge colliding with spherical jellium metal clusters. Our non-adiabatic, parameter-free results provide a benchmark for the widely used LDFA approximation and allow the discussion of various processes relevant to the electronic response of the system in the presence of the projectile.

Non-Markovian Vibrational Relaxation Dynamics at Surfaces

Vibrational dynamics of adsorbates near surfaces plays both an important role for applied surface science and as model lab for studying fundamental problems of open quantum systems. We employ a previously developed model for the relaxation of a D-Si-Si bending mode at a D:Si(100)-(2$\times$1) surface, induced by a ``bath' of more than $2000$ phonon modes [U. Lorenz, P. Saalfrank, Chem. Phys. {\bf 482}, 69 (2017)], to extend previous work along various directions. First, we use a Hierarchical Effective Mode (HEM) model [E.W. Fischer, F. Bouakline, M. Werther, P. Saalfrank, J. Chem. Phys. {\bf 153}, 064704 (2020)] to study relaxation of higher excited vibrational states than hitherto done, by solving a high-dimensional system-bath time-dependent Schr\"odinger equation (TDSE). In the HEM approach, (many) real bath modes are replaced by (much less) effective bath modes. Accordingly, we are able to examine scaling laws for vibrational relaxation lifetimes for a realistic surface science problem. Second, we compare the performance of the multilayer multiconfigurational time-dependent Hartree (ML-MCTDH) approach with the recently developed coherent-state based multi-Davydov D2 {\it ansatz} [N. Zhou, Z. Huang, J. Zhu, V. Chernyak, Y. Zhao, {J. Chem. Phys.} {\bf 143}, 014113 (2015)]. Both approaches work well, with some computational advantages for the latter in the presented context. Third, we apply open-system density matrix theory in comparison with basically ``exact' solutions of the multi-mode TDSEs. Specifically, we use an open-system Liouville-von Neumann (LvN) equation treating vibration-phonon coupling as Markovian dissipation in Lindblad form to quantify effects beyond the Born-Markov approximation.

Ultrafast, Non-Equilibrium and Transient Heating and Sintering of Nanocrystals for Nanoscale Metal Printing

The carrier excitation, relaxation, energy transport, and conversion processes during light-nanocrystal (NC) interactions have been intensively investigated for applications in optoelectronics, photocatalysis, and photovoltaics. However, there are limited studies on the non-equilibrium heating under relatively high laser excitation that leads to NCs sintering. Here, the authors use femtosecond laser two-pulse correlation and in-situ optical transmission probing to investigate the non-equilibrium heating of NCs and transient sintering dynamics. First, a two-pulse correlation study reveals that the sintering rate strongly increases when the two heating laser pulses are temporally separated by <10 ps. Second, the sintering rate is found to increase nonlinearly with laser fluence when heating with ≈700 fs laser pulses. By three-temperature modeling, the NC sintering mechanism mediated by electron induced ligand transformation is suggested. The ultrafast and non-equilibrium process facilitates sintering in dry (spin-coated) and wet (solvent suspended) environments. The nonlinear dependence of sintering rate on laser fluence is exploited to print sub-diffraction-limited features in NC suspension. The smallest feature printed is ≈200 nm, which is ≈¼ of the laser wavelength. These findings provide a new perspective toward nanomanufacturing development based on probing and engineering ultrafast transport phenomena in functional NCs.

Submicron Metal 3D Printing by Ultrafast Laser Heating and Induced Ligand Transformation of Nanocrystals

Currently, light-based three-dimensional (3D) printing with submicron features is mainly developed based on photosensitive polymers or inorganic-polymer composite materials. To eliminate polymer/organic additives, a strategy for direct 3D assembly and printing of metallic nanocrystals without additives is presented. Ultrafast laser with intensity in the range of 1 × 10¹⁰ to 1 × 10¹² W/cm² is used to nonequilibrium heat nanocrystals and induce ligand transformation, which triggers the spontaneous fusion and localized assembly of nanocrystals. The process is due to the operation of hot electrons as confirmed by a strong dependence of the printing rate on laser pulse duration varied in the range of electron-phonon relaxation time. Using the developed laser-induced ligand transformation (LILT) process, direct printing of 3D metallic structures at micro and submicron scales is demonstrated. Facile integration with other microscale additive manufacturing for printing 3D devices containing multiscale features is also demonstrated.

Photoinduced Desorption Dynamics of CO from Pd(111): A Neural Network Approach

Modeling the ultrafast photoinduced dynamics and reactivity of adsorbates on metals requires including the effect of the laser-excited electrons and, in many cases, also the effect of the highly excited surface lattice. Although the recent ab initio molecular dynamics with electronic friction and thermostats, (T_e,T_l)-AIMDEF [AlducinM.;Phys. Rev. Lett.2019, 123, 246802]31922860, enables such complex modeling, its computational cost may limit its applicability. Here, we use the new embedded atom neural network (EANN) method [ZhangY.;J. Phys. Chem. Lett.2019, 10, 496231397157] to develop an accurate and extremely complex potential energy surface (PES) that allows us a detailed and reliable description of the photoinduced desorption of CO from the Pd(111) surface with a coverage of 0.75 monolayer. Molecular dynamics simulations performed on this EANN-PES reproduce the (T_e,T_l)-AIMDEF results with a remarkable level of accuracy. This demonstrates the outstanding performance of the obtained EANN-PES that is able to reproduce available density functional theory (DFT) data for an extensive range of surface temperatures (90–1000 K); a large number of degrees of freedom, those corresponding to six CO adsorbates and 24 moving surface atoms; and the varying CO coverage caused by the abundant desorption events.

Unraveling current-induced dissociation mechanisms in single-molecule junctions

Understanding current-induced bond rupture in single-molecule junctions is both of fundamental interest and a prerequisite for the design of molecular junctions, which are stable at higher-bias voltages. In this work, we use a fully quantum mechanical method based on the hierarchical quantum master equation approach to analyze the dissociation mechanisms in molecular junctions. Considering a wide range of transport regimes, from off-resonant to resonant, non-adiabatic to adiabatic transport, and weak to strong vibronic coupling, our systematic study identifies three dissociation mechanisms. In the weak and intermediate vibronic coupling regime, the dominant dissociation mechanism is stepwise vibrational ladder climbing. For strong vibronic coupling, dissociation is induced via multi-quantum vibrational excitations triggered either by a single electronic transition at high bias voltages or by multiple electronic transitions at low biases. Furthermore, the influence of vibrational relaxation on the dissociation dynamics is analyzed and strategies for improving the stability of molecular junctions are discussed.

Ultrafast Dynamics of Electronic Resonances in Molecules Adsorbed on Metal Surfaces: A Wave Packet Propagation Approach

We present a wave packet propagation-based method to study the electron dynamics in molecular species in the gas phase and adsorbed on metal surfaces. It is a very general method that can be employed to any system where the electron dynamics is dominated by an active electron and the coupling between the discrete and continuum electronic states is of importance. As an example, one can consider resonant molecule-surface electron transfer or molecular photoionization. Our approach is based on a computational strategy allowing incorporating ab initio inputs from quantum chemistry methods, such as density functional theory, Hartree-Fock, and coupled cluster. Thus, the electronic structure of the molecule is fully taken into account. The electron wave function is represented on a three-dimensional grid in spatial coordinates, and its temporal evolution is obtained from the solution of the time-dependent Schrödinger equation. We illustrate our method with an example of the electron dynamics of anionic states localized on organic molecules adsorbed on metal surfaces. In particular, we study resonant charge transfer from the π* orbitals of three vinyl derivatives (acrylamide, acrylonitrile, and acrolein) adsorbed on a Cu(100) surface. Electron transfer between these lowest unoccupied molecular orbitals and the metal surface is extremely fast, leading to a decay of the population of the molecular anion on the femtosecond timescale. We detail how to analyze the time-dependent electronic wave function in order to obtain the relevant information on the system: the energies and lifetimes of the molecule-localized quasistationary states, their resonant wavefunctions, and the population decay channels. In particular, we demonstrate the effect of the electronic structure of the substrate on the energy and momentum distribution of the hot electrons injected into the metal by the decaying molecular resonance.

Photodesorption mechanism of water on WO3(001) - a combined embedded cluster, computational intelligence and wave packet approach

In this work we investigate the mechanism of photodesorption of water from a WO3(001) surface by theoretical calculations, applying an embedded cluster model. Using the CASSCF method, we have calculated both the ground state as well as the energetically preferred charge-transfer state in three degrees of freedom of the water molecule on the surface. The calculated potential energy surfaces were afterwards fitted with a neural network optimized by a genetic algorithm. A final quantum dynamic wave packet study provided insight into the photodesorption mechanism.

A hierarchical effective mode approach to phonon-driven multilevel vibrational relaxation dynamics at surfaces

We discuss an efficient Hierarchical Effective Mode (HEM) representation of a high-dimensional harmonic oscillator bath, which describes phonon-driven vibrational relaxation of an adsorbate-surface system, namely, deuterium adsorbed on Si(100). Starting from the original Hamiltonian of the adsorbate-surface system, the HEM representation is constructed via iterative orthogonal transformations, which are efficiently implemented with Householder matrices. The detailed description of the HEM representation and its construction are given in the second quantization representation. The hierarchical nature of this representation allows access to the exact quantum dynamics of the adsorbate-surface system over finite time intervals, controllable via the truncation order of the hierarchy. To study the convergence properties of the effective mode representation, we solve the time-dependent Schrödinger equation of the truncated system-bath HEM Hamiltonian, with the help of the multilayer extension of the Multiconfigurational Time-Dependent Hartree (ML-MCTDH) method. The results of the HEM representation are compared with those obtained with a quantum-mechanical tier-model. The convergence of the HEM representation with respect to the truncation order of the hierarchy is discussed for different initial conditions of the adsorbate-surface system. The combination of the HEM representation with the ML-MCTDH method provides information on the time evolution of the system (adsorbate) and multiple effective modes of the bath (surface). This permits insight into mechanisms of vibration-phonon coupling of the adsorbate-surface system, as well as inter-mode couplings of the effective bath.

Scattering of NO(ν = 3) from Au(111): a stochastic dissipative quantum dynamical perspective

In this work, we present a theoretical study of the scattering dynamics of NO(ν = 3) from an ideal unreconstructed Au(111) surface. The simulations are performed in reduced dimensions at the three high-symmetry sites employing our recent modification to the stochastic wave packet approach for diatomic-metal scattering [J. Chem. Phys., 2019, 150, 184105]. Energy exchange between molecular vibrational degrees of freedom and the electron-hole pairs (EHP) of the metal is accounted for by quantized stochastic jump operators, with associated rates obtained from a microscopic model based on Fermi's golden rule. The simulations are found to reproduce the experimentally observed trend of enhanced vibrational relaxation probabilities with increasing initial translational energy. Molecular dynamics simulations with electronic friction (MDEF) in the independent atom approximation were performed to compare classical and quantum dynamical descriptions of that system. Significant differences between these two descriptions were found indicating that intermode coupling must be described accurately by using a good potential energy surface, and pointing out at the potentially important influence of a quantized description of energy relaxation in describing the scattering of NO from Au(111).

Electrons and Phonons Cooperate in the Laser-Induced Desorption of CO from Pd(111)

Femtosecond laser induced desorption of CO from a CO-covered Pd(111) surface is investigated with ab initio molecular dynamics with electronic friction that incorporates effects due to the excited electronic and phononic systems, as well as out-of-phase coadsorbate interactions. Our simulations show evidence of an important electron-phonon synergy in promoting CO desorption that has largely been neglected in other similar systems. At the saturated coverage of 0.75 ML, effects due to CO-CO interadsorbate energy exchange are also important. Our dynamics simulations, in concert with site-specific desorption energy calculations, allow us to understand the large coverage dependence of the desorption yields observed in experiments.

Dissipative quantum dynamics using the stochastic surrogate Hamiltonian approach

Based on the original Stochastic Surrogate Hamiltonian approach for the simulation of open quantum system dynamics, we present a modified algorithm for the swap procedure. The implementation is tested with nuclear relaxation dynamics of model systems known from literature, i.e., the harmonic oscillator and the Morse oscillator. Finally, the stochastic surrogate Hamiltonian is applied to simulate the dynamical electronic excitation and relaxation of a photodesorption process. This is the first application of the stochastic surrogate Hamiltonian in an ab initio context. A comparison to a surrogate Hamiltonian benchmark allows us to evaluate the results obtained. For this purpose, the well-studied laser-induced desorption of NO from NiO(100) is chosen.

Dynamics in reactions on metal surfaces: A theoretical perspective

Recent advances in theoretical characterization of reaction dynamics on metal surfaces are reviewed. It is shown that the widely available density functional theory of metals and their interactions with molecules have enabled first principles theoretical models for treating surface reaction dynamics. The new theoretical tools include methods to construct high-dimensional adiabatic potential energy surfaces, to characterize nonadiabatic processes within the electronic friction models, and to describe dynamics both quantum mechanically and classically. Three prototypical surface reactions, namely, dissociative chemisorption, Eley-Rideal reactions, and recombinative desorption, are surveyed with a focus on some representative examples. While principles governing gas phase reaction dynamics may still be applicable, the presence of the surface introduces a higher level of complexity due to strong interaction between the molecular species and metal substrate. Furthermore, most of these reactive processes are impacted by energy exchange with surface phonons and/or electron-hole pair excitations. These theoretical studies help to interpret and rationalize experimental observations and, in some cases, guide experimental explorations. Knowledge acquired in these fundamental studies is expected to impact many practical problems in a wide range of interfacial processes.

Stochastic wave packet approach to nonadiabatic scattering of diatomic molecules from metals

In this contribution, we present a quantum dynamical approach to study inelastic scattering of diatomic molecules from metal surfaces at normal incidence. The dissipative dynamics obeys a stochastic Schrödinger equation describing the time-evolution of the system as a piecewise deterministic process. Energy exchange between the molecular vibrational degrees of freedom and the metal electrons is represented using operators in tensor product form, which are coupled via anharmonic transition rates calculated from first-order perturbation theory. Full dimensional observables are obtained by averaging over simulations in 4D-including the internal stretch, the distance to the surface, and the orientation angles-at different surface sites. The method is applied to the state-resolved scattering of vibrationally excited NO from Au(111), revealing important channels for quantized energy relaxation.

Ultrafast Transient Dynamics of Adsorbates on Surfaces Deciphered: The Case of CO on Cu(100)

Time-resolved vibrational spectroscopy constitutes an invaluable experimental tool for monitoring hot-carrier-induced surface reactions. However, the absence of a full understanding of the precise microscopic mechanisms causing the transient spectral changes has limited its applicability. Here we introduce a robust first-principles theoretical framework that successfully explains both the nonthermal frequency and linewidth changes of the CO internal stretch mode on Cu(100) induced by femtosecond laser pulses. Two distinct processes engender the changes: electron-hole pair excitations underlie the nonthermal frequency shifts, while electron-mediated vibrational mode coupling gives rise to linewidth changes. Furthermore, the origin and precise sequence of coupling events are finally identified.

Regulating the femtosecond excited-state lifetime of a single molecule

The key to controlling reactions of molecules induced with the current of a scanning tunneling microscope (STM) tip is the ultrashort intermediate excited ionic state. The initial condition of the excited state is set by the energy and position of the injected current; thereafter, its dynamics determines the reaction outcome. We show that a STM can directly and controllably influence the excited-state dynamics. For the STM-induced desorption of toluene molecules from the Si(111)-7x7 surface, as the tip approaches the molecule, the probability of manipulation drops by two orders of magnitude. A two-channel quenching of the excited state is proposed, consisting of an invariant surface channel and a tip height-dependent channel. We conclude that picometer tip proximity regulates the lifetime of the excited state from 10 femtoseconds to less than 0.1 femtoseconds.

Electron-Mediated Phonon-Phonon Coupling Drives the Vibrational Relaxation of CO on Cu(100)

We bring forth a consistent theory for the electron-mediated vibrational intermode coupling that clarifies the microscopic mechanism behind the vibrational relaxation of adsorbates on metal surfaces. Our analysis points out the inability of state-of-the-art nonadiabatic theories to quantitatively reproduce the experimental linewidth of the CO internal stretch mode on Cu(100) and it emphasizes the crucial role of the electron-mediated phonon-phonon coupling in this regard. The results demonstrate a strong electron-mediated coupling between the internal stretch and low-energy CO modes, but also a significant role of surface motion. Our nonadiabatic theory is also able to explain the temperature dependence of the internal stretch phonon linewidth, thus far considered a sign of the direct anharmonic coupling.

Unified description of H-atom-induced chemicurrents and inelastic scattering

The Born-Oppenheimer approximation (BOA) provides the foundation for virtually all computational studies of chemical binding and reactivity, and it is the justification for the widely used "balls and springs" picture of molecules. The BOA assumes that nuclei effectively stand still on the timescale of electronic motion, due to their large masses relative to electrons. This implies electrons never change their energy quantum state. When molecules react, atoms must move, meaning that electrons may become excited in violation of the BOA. Such electronic excitation is clearly seen for: (i) Schottky diodes where H adsorption at Ag surfaces produces electrical "chemicurrent;" (ii) Au-based metal-insulator-metal (MIM) devices, where chemicurrents arise from H-H surface recombination; and (iii) Inelastic energy transfer, where H collisions with Au surfaces show H-atom translation excites the metal's electrons. As part of this work, we report isotopically selective hydrogen/deuterium (H/D) translational inelasticity measurements in collisions with Ag and Au. Together, these experiments provide an opportunity to test new theories that simultaneously describe both nuclear and electronic motion, a standing challenge to the field. Here, we show results of a recently developed first-principles theory that quantitatively explains both inelastic scattering experiments that probe nuclear motion and chemicurrent experiments that probe electronic excitation. The theory explains the magnitude of chemicurrents on Ag Schottky diodes and resolves an apparent paradox--chemicurrents exhibit a much larger isotope effect than does H/D inelastic scattering. It also explains why, unlike Ag-based Schottky diodes, Au-based MIM devices are insensitive to H adsorption.

Nonadiabatic Vibrational Damping of Molecular Adsorbates: Insights into Electronic Friction and the Role of Electronic Coherence

We present a perturbation approach rooted in time-dependent density-functional theory to calculate electron-hole (e-h) pair excitation spectra during the nonadiabatic vibrational damping of adsorbates on metal surfaces. Our analysis for the benchmark systems CO on Cu(100) and Pt(111) elucidates the surprisingly strong influence of rather short electronic coherence times. We demonstrate how in the limit of short electronic coherence times, as implicitly assumed in prevalent quantum nuclear theories for the vibrational lifetimes as well as electronic friction, band structure effects are washed out. Our results suggest that more accurate lifetime or chemicurrentlike experimental measurements could characterize the electronic coherence.

Isotopic effects in vibrational relaxation dynamics of H on a Si(100) surface

In a recent paper [U. Lorenz and P. Saalfrank, Chem. Phys. 482, 69 (2017)], we proposed a robust scheme to set up a system-bath model Hamiltonian, describing the coupling of adsorbate vibrations (system) to surface phonons (bath), from first principles. The method is based on an embedded cluster approach, using orthogonal coordinates for system and bath modes, and an anharmonic phononic expansion of the system-bath interaction up to second order. In this contribution, we use this model Hamiltonian to calculate vibrational relaxation rates of H-Si and D-Si bending modes, coupled to a fully H(D)-covered Si(100)-(2×1) surface, at zero temperature. The D-Si bending mode has an anharmonic frequency lying inside the bath frequency spectrum, whereas the H-Si bending mode frequency is outside the bath Debye band. Therefore, in the present calculations, we only take into account one-phonon system-bath couplings for the D-Si system and both one- and two-phonon interaction terms in the case of H-Si. The computation of vibrational lifetimes is performed with two different approaches, namely, Fermi's golden rule, and a generalized Bixon-Jortner model built in a restricted vibrational space of the adsorbate-surface zeroth-order Hamiltonian. For D-Si, the Bixon-Jortner Hamiltonian can be solved by exact diagonalization, serving as a benchmark, whereas for H-Si, an iterative scheme based on the recursive residue generation method is applied, with excellent convergence properties. We found that the lifetimes obtained with perturbation theory, albeit having almost the same order of magnitude-a few hundred fs for D-Si and a couple of ps for H-Si-, are strongly dependent on the discretized numerical representation of the bath spectral density. On the other hand, the Bixon-Jortner model is free of such numerical deficiencies, therefore providing better estimates of vibrational relaxation rates, at a very low computational cost. The results obtained with this model clearly show a net exponential decay of the time-dependent survival probability for the H-Si initial vibrational state, allowing an easy extraction of the bending mode "lifetime." This is in contrast with the D-Si system, whose survival probability exhibits a non-monotonic decay, making it difficult to define such a lifetime. This different behavior of the vibrational decay is rationalized in terms of the power spectrum of the adsorbate-surface system. In the case of D-Si, it consists of several, non-uniformly distributed peaks around the bending mode frequency, whereas the H-Si spectrum exhibits a single Lorentzian lineshape, whose width corresponds to the calculated lifetime. The present work gives some insight into mechanisms of vibration-phonon coupling at surfaces. It also serves as a benchmark for multidimensional system-bath quantum dynamics, for comparison with approximate schemes such as reduced, open-system density matrix theory (where the bath is traced out and a Liouville-von Neumann equation is solved) or approximate wavefunction methods to solve the combined system-bath Schrödinger equation.

Vibrational Excitation of H2 Scattering from Cu(111): Effects of Surface Temperature and of Allowing Energy Exchange with the Surface

In scattering of H₂ from Cu(111), vibrational excitation has so far defied an accurate theoretical description. To expose the causes of the large discrepancies with experiment, we investigate how the feature due to vibrational excitation (the "gain peak") in the simulated time-of-flight spectrum of (v = 1, j = 3) H₂ scattering from Cu(111) depends on the surface temperature (T_s) and the possibility of energy exchange with surface phonons and electron-hole pairs (ehp's). Quasi-classical dynamics calculations are performed on the basis of accurate semiempirical density functionals for the interaction with H₂ + Cu(111). The methods used include the quasi-classical trajectory method within the Born-Oppenheimer static surface model, the generalized Langevin oscillator (GLO) method incorporating energy transfer to surface phonons, the GLO + friction (GLO+F) method also incorporating energy exchange with ehp's, and ab initio molecular dynamics with electronic friction (AIMDEF). Of the quasi-classical methods tested, comparison with AIMDEF suggests that the GLO+F method is accurate enough to describe vibrational excitation as measured in the experiments. The GLO+F calculations also suggest that the promoting effect of raising T_s on the measured vibrational excitation is due to an electronically nonadiabatic mechanism. However, by itself, enabling energy exchange with the surface by modeling surface phonons and ehp's leads to reduced vibrational excitation, further decreasing the agreement with experiment. The simulated gain peak is quite sensitive to energy shifts in calculated vibrational excitation probabilities and to shifts in a specific experimental parameter (the chopper opening time). While the GLO+F calculations allow important qualitative conclusions, comparison to quantum dynamics results suggests that, with the quasi-classical way of describing nuclear motion and the present box quantization method for assigning the final vibrational state, the gain peak is not yet described with quantitative accuracy. Ways in which this problem might be resolved in the future are discussed.

Adlayer structure dependent ultrafast desorption dynamics in carbon monoxide adsorbed on Pd (111)

We report our ultrafast photoinduced desorption investigation of the coverage dependence of substrate-adsorbate energy transfer in carbon monoxide adlayers on the (111) surface of palladium. As the CO coverage is increased, the adsorption site population shifts from all threefold hollows (up to 0.33 ML), to bridge and near bridge (>0.5 to 0.6 ML) and finally to mixed threefold hollow plus top site (at saturation at 0.75 ML). We show that between 0.24 and 0.75 ML this progression of binding site motifs is accompanied by two remarkable features in the ultrafast photoinduced desorption of the adsorbates: (i) the desorption probability increases roughly two orders magnitude, and (ii) the adsorbate-substrate energy transfer rate observed in two-pulse correlation experiments varies nonmonotonically, having a minimum at intermediate coverages. Simulations using a phenomenological model to describe the adsorbate-substrate energy transfer in terms of frictional coupling indicate that these features are consistent with an adsorption-site dependent electron-mediated energy coupling strength, ηel, that decreases with binding site in the order: three-fold hollow > bridge and near bridge > top site. This weakening of ηel largely counterbalances the decrease in the desorption activation energy that accompanies this progression of adsorption site motifs, moderating what would otherwise be a rise of several orders of magnitude in the desorption probability. Within this framework, the observed energy transfer rate enhancement at saturation coverage is due to interadsorbate energy transfer from the copopulation of molecules bound in three-fold hollows to their top-site neighbors.

Disentangling Multidimensional Nonequilibrium Dynamics of Adsorbates: CO Desorption from Cu(100)

Hot carriers at metal surfaces can drive nonthermal reactions of adsorbates. Characterizing nonequilibrium statistics among various degrees of freedom in an ultrafast time scale is crucial to understand and develop hot carrier-driven chemistry. Here we demonstrate multidimensional vibrational dynamics of carbon monoxide (CO) on Cu(100) along hot-carrier induced desorption studied by using time-resolved vibrational sum-frequency generation with phase-sensitive detection. Instantaneous frequency and amplitude of the CO internal stretching mode are tracked with a subpicosecond time resolution that is shorter than the vibrational dephasing time. These experimental results in combination with numerical analysis based on Langevin simulations enable us to extract nonequilibrium distributions of external vibrational modes of desorbing molecules. Superstatistical distributions are generated with mode-dependent frictional couplings in a few hundred femtoseconds after hot-electron excitation, and energy flow from hot electrons and intermode anharmonic coupling play crucial roles in the subsequent evolution of the non-Boltzman distributions.

Hot Adatom Diffusion Following Oxygen Dissociation on Pd(100) and Pd(111): A First-Principles Study of the Equilibration Dynamics of Exothermic Surface Reactions

We augment ab initio molecular dynamics simulations with a quantitative account of phononic dissipation to study the hyperthermal adsorbate dynamics resulting from a noninstantaneous energy dissipation during exothermic surface chemical reactions. Comparing the hot adatom diffusion ensuing O_{2} dissociation over Pd(100) and Pd(111) we find experimentally accessible product end distances to form a rather misleading measure for the lifetime of this hyperthermal state. The lifetime is particularly long at Pd(111) where a random-walk-type diffusion leads only to small net displacements. A detailed phonon analysis rationalizes the slow equilibration through long-lived Rayleigh mode excitations that spatially confine the released energy within a nanoscopic "hot spot" around the impingement region.

Photodissociation of water on rutile (110): A wave packet approach based on first principles

The photodissociation of water on rutile (110) is studied from first principles. Using an embedded cluster approach, the motion of one hydrogen atom with a fixed OH group served as a model system. The ground and an electronically excited state are calculated on a CASSCF level of theory, explicitly accounting for the multi-reference character of the wave function during bond breaking. The dynamics is simulated by solving the time-dependent Schrödinger equation for a wave packet moving on the electronic potential energy surface. Photodissociation probabilities of water are calculated for hydrogen, deuterium and tritium, thereby revealing significant isotope effects.

Indication of non-thermal contribution to visible femtosecond laser-induced CO oxidation on Ru(0001)

We studied CO oxidation on Ru(0001) induced by 400 nm and 800 nm femtosecond laser pulses where we find a branching ratio between CO oxidation and desorption of 1:9 and 1:31, respectively, showing higher selectivity towards CO oxidation for the shorter wavelength excitation. Activation energies computed with density functional theory show discrepancies with values extracted from the experiments, indicating both a mixture between different adsorbed phases and importance of non-adiabatic effects on the effective barrier for oxidation. We simulated the reactions using kinetic modeling based on the two-temperature model of laser-induced energy transfer in the substrate combined with a friction model for the coupling to adsorbate vibrations. This model gives an overall good agreement with experiment except for the substantial difference in yield ratio between CO oxidation and desorption at 400 nm and 800 nm. However, including also the initial, non-thermal effect of electrons transiently excited into antibonding states of the O-Ru bond yielded good agreement with all experimental results.

Electronic Friction-Based Vibrational Lifetimes of Molecular Adsorbates: Beyond the Independent-Atom Approximation

We assess the accuracy of vibrational damping rates of diatomic adsorbates on metal surfaces as calculated within the local-density friction approximation (LDFA). An atoms-in-molecules (AIM) type charge partitioning scheme accounts for intramolecular contributions and overcomes the systematic underestimation of the nonadiabatic losses obtained within the prevalent independent-atom approximation. The quantitative agreement obtained with theoretical and experimental benchmark data suggests the LDFA-AIM scheme as an efficient and reliable approach to account for electronic dissipation in ab initio molecular dynamics simulations of surface chemical reactions.

Photodesorption of water from rutile(110): ab initio calculation of five-dimensional potential energy surfaces of ground and excited electronic states and wave packet studies

In this paper, we report on our results concerning the interaction of water with titanium dioxide in its rutile modification. The (110) surface is modelled by an embedded Ti9O18Mg7(14+) cluster. We present up to five-dimensional potential energy surfaces for the water molecule on this surface and include the dissociation of one hydrogen atom. The electronic ground state as well as one electronically excited state is included. To deal with the multi-configurational character of the wave function, we use the complete active space self-consistent field (CASSCF) approach. The resulting potential energy surfaces are fitted by means of an artificial neural network. As a first example of quantum dynamical studies based on our potential surfaces, we present results on the photodesorption of water from rutile(110).

Quantum dynamical study of femtosecond photodesorption of CO from TiO2(110)

The photodesorption of CO from TiO2(110) by femtosecond pulses is investigated with the Surrogate Hamiltonian approach. The aim of the study is to resolve the relaxation mechanism and forecast the lifetime of the exited state based on a microscopic description of the excitation and relaxation processes. The parameters characterizing the system are obtained from ab initio and Density Functional Theory-calculations with one parameter estimated from physical considerations and convergence studies. Two electronic states are considered and the relaxation is assumed to be due to the interaction of the excited adsorbate with electron hole pairs in the surface. Desorption probabilities and velocity distributions of the desorbing molecules are calculated and an exited state lifetime is predicted. Throughout this paper atomic units, i.e., ℏ = me = e = a0 = 1, have been used unless otherwise stated.

Relaxation dynamics in quantum dissipative systems: the microscopic effect of intramolecular vibrational energy redistribution

We investigate the effect of inter-mode coupling on the vibrational relaxation dynamics of molecules in weak dissipative environments. The simulations are performed within the reduced density matrix formalism in the Markovian regime, assuming a Lindblad form for the system-bath interaction. The prototypical two-dimensional model system representing two CO molecules approaching a Cu(100) surface is adapted from an ab initio potential, while the diatom-diatom vibrational coupling strength is systematically varied. In the weak system-bath coupling limit and at low temperatures, only first order non-adiabatic uni-modal coupling terms contribute to surface-mediated vibrational relaxation. Since dissipative dynamics is non-unitary, the choice of representation will affect the evolution of the reduced density matrix. Two alternative representations for computing the relaxation rates and the associated operators are thus compared: the fully coupled spectral basis, and a factorizable ansatz. The former is well-established and serves as a benchmark for the solution of Liouville-von Neumann equation. In the latter, a contracted grid basis of potential-optimized discrete variable representation is tailored to incorporate most of the inter-mode coupling, while the Lindblad operators are represented as tensor products of one-dimensional operators, for consistency. This procedure results in a marked reduction of the grid size and in a much more advantageous scaling of the computational cost with respect to the increase of the dimensionality of the system. The factorizable method is found to provide an accurate description of the dissipative quantum dynamics of the model system, specifically of the time evolution of the state populations and of the probability density distribution of the molecular wave packet. The influence of intra-molecular vibrational energy redistribution appears to be properly taken into account by the new model on the whole range of coupling strengths. It demontrates that most of the mode mixing during relaxation is due to the potential part of the Hamiltonian and not to the coupling among relaxation operators.