Recent Advances in Transition Metal Catalyzed Oxidation of Organic Substrates with Molecular Oxygen

Discovery and biochemical characterization of thermostable glycerol oxidases

Alditol oxidases are promising tools for the biocatalytic oxidation of glycerol to more valuable chemicals. By integrating in silico bioprospecting with cell-free protein synthesis and activity screening, an effective pipeline was developed to rapidly identify enzymes that are active on glycerol. Three thermostable alditol oxidases from Actinobacteria Bacterium, Streptomyces thermoviolaceus, and Thermostaphylospora chromogena active on glycerol were discovered. The characterization of these three flavoenzymes demonstrated their glycerol oxidation activities, preference for alkaline conditions, and excellent thermostabilities with melting temperatures higher than 75 °C. Structural elucidation of the alditol oxidase from Actinobacteria Bacterium highlighted a constellation of side chains that engage the substrate through several hydrogen bonds, a histidine residue covalently bound to the FAD prosthetic group, and a tunnel leading to the active site. Upon computational simulations of substrate binding, a double mutant targeting a residue pair at the tunnel entrance was created and found to display an improved thermal stability and catalytic efficiency for glycerol oxidation. The hereby described alditol oxidases form a valuable panel of oxidative biocatalysts that can perform regioselective oxidation of glycerol and other polyols. KEY POINTS: • Rapid pipeline designed to identify putative oxidases • Biochemical and structural characterization of alditol oxidases • Glycerol oxidation to more valuable derivatives.

Direct oxygen insertion into C-C bond of styrenes with air

Skeletal editing of single-atom insertion to basic chemicals has been demonstrated as an efficient strategy for the discovery of structurally diversified compounds. Previous endeavors in skeletal editing have successfully facilitated the insertion of boron, nitrogen, and carbon atoms. Given the prevalence of oxygen atoms in biologically active molecules, the direct oxygenation of C-C bonds through single-oxygen-atom insertion like Baeyer-Villiger reaction is of particular significance. Herein, we present an approach for the skeletal modification of styrenes using O2 via oxygen insertion, resulting in the formation of aryl ether frameworks under mild reaction conditions. The broad functional-group tolerance and the excellent chemo- and regioselectivity are demonstrated in this protocol. A preliminary mechanistic study indicates the potential involvement of 1,2-aryl radical migration in this reaction.

Synthesis and catalytic application of nanostructured metal oxides and phosphates

The design and development of new high-performance catalysts is one of the most important and challenging issues to achieve sustainable chemical and energy production. This Feature Article describes the synthesis of nanostructured metal oxides and phosphates mainly based on earth-abundant metals and their thermocatalytic application to selective oxidation and acid-base reactions. A simple and versatile methodology for the control of nanostructures based on crystalline complex oxides and phosphates with diverse structures and compositions is proposed as another approach to catalyst design. Herein, two unique and verstile methods for the synthesis of metal oxide and phosphate nanostructures are introduced; an amino acid-aided method for metal oxides and phosphates and a precursor crystallization method for porous manganese oxides. Nanomaterials based on perovskite oxides, manganese oxides, and metal phosphates can function as effective heterogeneous catalysts for selective aerobic oxidation, biomass conversion, direct methane conversion, one-pot synthesis, acid-base reactions, and water electrolysis. Furthermore, the structure-activity relationship is clarified based on experimental and computational approaches, and the influence of oxygen vacancy formation, concerted activation of molecules, and the redox/acid-base properties of the outermost surface are discussed. The proposed methodology for nanostructure control would be useful not only for the design and understanding of the complexity of metal oxide catalysts, but also for the development of innovative catalysts.

Rhodium-Catalyzed Arene Alkenylation: Selectivity and Reaction Mechanism as a Function of In Situ Oxidant Identity

Rhodium catalyzed arene alkenylation reactions with arenes and olefins using dioxygen as the direct oxidant (e.g., ACS Catal. 2020, 10, 11519), Cu(II) carboxylates (e.g., Science 2015, 348, 421; J. Am. Chem. Soc. 2017, 139, 5474) or Fe(III) carboxylate clusters (e.g., ACS Catal. 2024, 14, 10295), in the presence or absence of dioxygen, have been reported. These processes involve heating catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2, olefin, arene, and oxidant at temperatures between 120 and 200 °C. Herein, we report comparative studies of Rh-catalyzed arene alkenylation as a function of oxidant identity. This work includes comparisons of catalysis using Cu(II) carboxylates in the presence and absence of dioxygen, catalysis with only dioxygen as the oxidant, and Fe(III) carboxylates in the presence and absence of dioxygen. We report studies of catalysis with each oxidant including reagent concentration dependencies and kinetic isotope effect experiments using C6H6 or C6D6 and protio- or deutero carboxylic acid. Additionally, we probe ortho/meta/para regioselectivity for reactions of ethylene with monosubstituted arenes and Markovnikov/anti-Markovnikov selectivity with monosubstituted olefins. These studies indicate that the variation of oxidant identity impacts catalyst speciation, the reaction mechanism, and the reaction rate. Consequently, distinct Markovnikov/anti-Markovnikov and ortho/meta/para selectivities are observed for catalysis with each oxidant.

Selective synthesis of cyclic alcohols from cycloalkanes using nickel(ii) complexes of tetradentate amidate ligands

Selective functionalisation of hydrocarbons using transition metal complexes has evoked significant research interest in industrial chemistry. However, selective oxidation of unactivated aliphatic C-H bonds is challenging because of the high bond dissociation energies. Herein, we report the synthesis, characterisation and catalytic activity of nickel(ii) complexes ([Ni(L1-L3)(OH2)2](ClO4)2 (1-3)) of monoamidate tetradentate ligands [L1: 2-(bis(pyridin-2-ylmethyl)amino)-N-phenylacetamide, L2: 2-(bis(2-pyridin-2-ylmethyl)amino)-N-(naphthalen-1-yl)acetamide, L3: N-benzyl-2-(bis(pyridin-2-ylmethyl)amino)acetamide] in selective oxidation of cycloalkanes using m-CPBA as the oxidant. In cyclohexane oxidation, catalysts showed activity (TON) in the order 1 (654) > 2 (589) > 3 (359) with a high A/(K + L) ratio up to 23.6. Using catalyst 1, the substrate scope of the reaction was broadened by including other cycloalkanes such as cyclopentane, cycloheptane, cyclooctane, adamantane and methylcyclohexane. Further, the Fenton-type reaction in the catalytic cycle was discarded based on the relatively high 3°/2° ratio of 8.6 in adamantane oxidation. Although the formation of chlorinated products during the reactions confirmed the contribution of the 3-chlorobenzoyloxy radical mechanism, the high alcohol selectivity obtained for the reactions indicated the participation of nickel-based oxidants in the oxidation process.

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

A Porphyrin-Faced Zn8L6 Cage for Selective Oxidation of C(sp3)-H Bonds and Sulfides

Catalytic oxidation of benzyl C-H bonds and sulfides from fuel oils stands as an attractive proposition in the quest for clean energy, yet their simultaneous oxidation with a singular, economically friendly catalyst is not well established. In this work, the combination of a cobalt(II) porphyrin ligand with 2-pyridinecarboxaldehyde and ZnII yielded a Zn8L6 cage (Co cube). The three-dimensional conjugated structure effectively enhances energy transfer efficiency, enabling the Co cube to show a good ability to activate oxygen under light conditions for photooxidation. Moreover, this catalytic system demonstrates high selectivity for the photocatalytic oxidation of C(sp3)-H bonds and sulfides, employing the Co cube as a single component catalyst, molecular oxygen as the oxidant, and activating oxygen into 1O2 under mild reaction conditions. This provides significant insights for organic synthesis and future design of photocatalysts with complex molecular components.

Hexa-Fe(III) Carboxylate Complexes Facilitate Aerobic Hydrocarbon Oxidative Functionalization: Rh Catalyzed Oxidative Coupling of Benzene and Ethylene to Form Styrene

Fe(II) carboxylates react with dioxygen and carboxylic acid to form Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 (X = acetate or pivalate), which is an active oxidant for Rh-catalyzed arene alkenylation. Heating (150-200 °C) the catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2 with ethylene, benzene, Fe(II) carboxylate, and dioxygen yields styrene >30-fold faster than the reaction with dioxygen in the absence of the Fe(II) carboxylate additive. It is also demonstrated that Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 is an active oxidant under anaerobic conditions, and the reduced material can be reoxidized to Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 by dioxygen. At optimized conditions, a turnover frequency of ∼0.2 s-1 is achieved. Unlike analogous reactions with Cu(II) carboxylate oxidants, which undergo stoichiometric Cu(II)-mediated production of phenyl esters (e.g., phenyl acetate) as side products at temperatures ≥150 °C, no phenyl ester side product is observed when Fe carboxylate additives are used. Kinetic isotope effect experiments using C6H6 and C6D6 give k H/k D = 3.5(3), while the use of protio or monodeutero pivalic acid reveals a small KIE with k H/k D = 1.19(2). First-order dependencies on Fe(II) carboxylate and dioxygen concentration are observed in addition to complicated kinetic dependencies on the concentration of carboxylic acid and ethylene, both of which inhibit the reaction rate at a high concentration. Mechanistic studies are consistent with irreversible benzene C-H activation, ethylene insertion into the formed Rh-Ph bond, β-hydride elimination, and reaction of Rh-H with Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 to regenerate a Rh-carboxylate complex.

Interaction of N2, O2 and H2 Molecules with Superalkalis

Superalkalis (SAs) are exotic clusters having lower ionization energy than alkali atoms, which makes them strong reducing agents. In the quest for the reduction of diatomic molecules (X2) such as N2, O2, and H2 using Møller-Plesset perturbation theory (MP2), we have studied their interaction with typical superalkalis such as FLi2, OLi3, and NLi4 and calculated various parameters of the resulting SA-X2 complexes. We noticed that the SA-O2 complex and its isomers possess strong ionic interaction, which leads to the reduction of O2 to O2 - anion. On the contrary, there are both ionic and covalent interactions in SA-N2 complexes such that the lowest energy isomers are covalently bonded with no charge transfer from SA. Further, the interaction between SA and H2 leads to weakly bound complexes, which results in the adsorption of H2 molecules. The nature of interaction is found to be closely related to the electron affinity of diatomic molecules. These findings might be useful in the study of the activation, reduction, and adsorption of small molecules, which can be further explored for their possible applications.

A Metallomicellar Catalyst for Controlled Oxidation of Alcohols and Lignin Mimics in Water using Open Air as Oxidant

Alcohol groups and β-O-4 (C-C) linkages are widespread in biomass feedstock that are abundant renewable resource for value-added chemicals. The development of sustainable protocols for direct oxidation or oxidative cleavage of feedstock materials in a controlled fashion, using open air as an oxidant is an intellectually stimulating task to produce industrially important value-added carbonyls. Further, the oxidative depolymerization of lignin into fine chemicals has evoked interest in recent times. Herein, we report the first example of a catalyst system that could activate molecular oxygen from atmospheric air for controlled oxidation and oxidative cleavage/depolymerization of feedstock materials such as alcohols, β-O-4 (C-C) linkages and real lignin in water under open air conditions. The selectivity of carbonyl products is controlled by altering the pH between ~7.0 and ~12.0. The current strategy highlights the non-involvement of any external co-catalyst, oxidant, radical additives, and/or destructive organic solvents. The catalyst shows a wide substrate scope and eminent functional group tolerance. The upscaled multigram synthesis using an inexpensive catalyst and easily available oxidant evidences the practical utility of the developed protocol. A plausible mechanism has been proposed with the help of a few controlled experiments, and kinetic and computational studies.

A sustainable strategic approach for N-alkylation of amines with activation of alcohols triggered via a hydrogen auto-transfer reaction using a Pd(II) complex: evidence for metal-ligand cooperativity

This work describes a new well-defined, air-stable, phosphine free palladium(II) [Pd(L)Cl] (1) catalyst. This catalyst was utilized for N-alkylation of amines and indole synthesis where H2O was found to be the by-product. A broad range of aromatic amines were alkylated using this homogeneous catalyst with a catalyst loading of 0.1 mol%. Greener aromatic and aliphatic primary alcohols were utilized and a hydrogen auto-transfer strategy via a metal-ligand cooperative approach was investigated. The precursor of the antihistamine-containing drug molecule tripelennamine was synthesized on a gram scale for large-scale applicability of the current synthetic methodology. A number of control experiments were performed to investigate the possible reaction pathway and the outcomes of these experiments indicated the azo-chromophore as a hydrogen reservoir during the catalytic cycle.

Development of Lab-Scale Continuous Stirred-Tank Reactor as Flow Process Tool for Oxidation Reactions Using Molecular Oxygen

The use of sustainable oxidants is of great interest to the chemical industry, considering the importance of oxidation reactions for the manufacturing of chemicals and society's growing awareness of its environmental impact. Molecular oxygen (O2), with an almost optimal atom efficiency in oxidation reactions, presents one of the most attractive alternatives to common reagents that are not only toxic in most cases but produce stoichiometric amounts of waste that must be treated. However, fire and explosion safety concerns, especially when used in combination with organic solvents, restrict its easy use. Here, we use state-of-the-art 3D printing and experimental feedback to develop a miniature continuous stirred-tank reactor (mini-CSTR) that enables efficient use of O2 as an oxidant in organic chemistry. Outstanding heat dissipation properties, achieved through integrated jacket cooling and a high surface-to-volume ratio, allow for a safe operation of the exothermic oxidation of 2-ethylhexanal, surpassing previously reported product selectivity. Moving well beyond the proof-of-concept stage, we characterize and illustrate the reactor's potential in the gas-liquid-solid triphasic synthesis of an endoperoxide precursor of antileishmanial agents. The custom-designed magnetic overhead stirring unit provides improved stirring efficiency, facilitating the handling of suspensions and, in combination with the borosilicate gas dispersion plate, leading to an optimized gas-liquid interface. These results underscore the immense potential that lies within the use of mini-CSTR in sustainable chemistry.

Manganese-Catalyzed 5-Endo-trig Oxygenative Cyclization of α,β-Unsaturated Oximes under Air and Ambient Conditions for the Synthesis of 4,5-Dihydroisoxazoles

The stereoselective 5-endo-trig oxygenative cyclization of α,β-unsaturated oximes was achieved using molecular oxygen (O2) and a manganese catalyst. Several 4-hydroxy-4,5-dihydroisoxazoles were obtained in high yields by directly incorporating O2 from the atmosphere (eliminating the necessity for a pure oxygen environment) and using an unprecedentedly low loading of Mn(acac)3 (as little as 0.020 mol %) without additional additives. Because of its desirable features, such as operational simplicity, inexpensive catalyst, mild reaction conditions (open flask conditions at room temperature), and broad substrate compatibility, this novel reaction provides an attractive synthetic approach to producing 4-hydroxy-4,5-dihydroisoxazoles.

Iron-catalyzed selective construction of indole derivatives via oxidative C(sp3)-H functionalization of indolin-2-ones

Considering the importance of developing powerful catalysts and the pharmacophore characteristics of indole derivatives, we describe a switchable approach for the iron-catalyzed oxidative C(sp3)-H functionalization of indolin-2-ones. Selective transformations displayed excellent activity and chemoselectivity using FeCl2 as the catalyst, air as the oxidant, and alcohol as the solvent. By manipulating the reaction conditions, particularly the choice of solvent, catalyst loading, and reaction sequence, a series of valuable indole derivatives, including isatins and symmetrical and nonsymmetrical isoindigos, were selectively synthesized in good to excellent yields. Furthermore, the gram-scale synthesis of compounds with biological anticancer activity under simple conditions highlights their great potential in practical applications.

Progress in Electrochemically Empowered C-O Bond Formation: Unveiling the Pathway of Efficient Green Synthesis

(C-X) bonds (X=C, N, O) are the main backbone for making different skeleton in the organic synthetic transformations. Among all the sustainable techniques, electro-organic synthesis for C-X bond formation is the advanced tool as it offers a greener and more cost-effective approach to chemical reactions by utilizing electrons as reagents. In this review, we want to explore the recent advancements in electrochemical C-O bond formation. The electrochemically driven C-O bond formation represents an emerging and exciting area of research. In this context, electrochemical techniques offers numerous advantages, including higher yields, cost-efficient production, and simplified work-up procedures. This method enables the continuous and consistent formation of C-O bonds in molecules, significantly enhancing overall reaction yields. Furthermore, both intramolecular and intermolecular C-O bond forming reaction provided valuable products of O-containing acyclic/cyclic analogue. Hence, carbonyl (C=O), ether -O-), and ester (-COOR) functionalization in both cyclic/acyclic analogues have been prepared continuously via this innovative pathway. In this context, we want to discuss one-decade electrochemical synthetic pathways of various C-O bond contains functional group in chronological manner. This review focused on all the synthetic aspects including mechanistic path and has also mentioned overall critical finding regarding the C-O bond formation via electrochemical pathways.

Tailoring Charge Separation in ZnIn2S4@CdS Hollow Nanocages for Simultaneous Alcohol Oxidation and CO2 Reduction under Visible Light

Artificial photosynthesis provides a sustainable strategy for producing usable fuels and fine chemicals and attracts broad research interest. However, conventional approaches suffer from low reactivity or low selectivity. Herein, we demonstrate that photocatalytic reduction of CO2 coupled with selective oxidation of aromatic alcohol into corresponding syngas and aromatic aldehydes can be processed efficiently and fantastically over the designed S-scheme ZnIn2S4@CdS core-shell hollow nanocage under visible light. In the ZnIn2S4@CdS heterostructure, the photoexcited electrons and holes with weak redox capacities are eliminated, while the photoexcited electrons and holes with powder redox capacities are separated spatially and preserved on the desired active sites. Therefore, even if there are no cocatalysts and no vacancies, ZnIn2S4@CdS exhibits high reactivity. For instance, the CO production of ZnIn2S4@CdS is about 3.2 and 3.4 times higher than that of pure CdS and ZnIn2S4, respectively. More importantly, ZnIn2S4@CdS exhibits general applicability and high photocatalytic stability. Trapping agent experiments, 13CO2 isotopic tracing, in situ characterizations, and theoretical calculations reveal the photocatalytic mechanism. This study provides a new strategy to design efficient and selective photocatalysts for dual-function redox reactions by tailoring the active sites and regulating vector separation of photoexcited charge carriers.

Dioxygen compatible electron donor-acceptor catalytic system and its enabled aerobic oxygenation

The photochemical properties of Electron Donor-Acceptor (EDA) complexes present exciting opportunities for synthetic chemistry. However, these strategies often require an inert atmosphere to maintain high efficiency. Herein, we develop an EDA complex photocatalytic system through rational design, which overcomes the oxygen-sensitive limitation of traditional EDA photocatalytic systems and enables aerobic oxygenation reactions through dioxygen activation. The mild oxidation system transfers electrons from the donor to the effective catalytic acceptor upon visible light irradiation, which are subsequently captured by molecular oxygen to form the superoxide radical ion, as demonstrated by the specific fluorescent probe, dihydroethidine (DHE). Furthermore, this visible-light mediated oxidative EDA protocol is successfully applied in the aerobic oxygenation of boronic acids. We believe that this photochemical dioxygen activation strategy enabled by EDA complex not only provides a practical approach to aerobic oxygenation but also promotes the design and application of EDA photocatalysis under ambient conditions.

Water co-catalysis in aerobic olefin epoxidation mediated by ruthenium oxo complexes

We report the development of a versatile Ru-porphyrin catalyst system which performs the aerobic epoxidation of aromatic and aliphatic (internal) alkenes under mild conditions, with product yields of up to 95% and turnover numbers (TON) up to 300. Water is shown to play a crucial role in the reaction, significantly increasing catalyst efficiency and substrate scope. Detailed mechanistic investigations employing both computational studies and a range of experimental techniques revealed that water activates the RuVI di-oxo complex for alkene epoxidation via hydrogen bonding, stabilises the RuIV mono-oxo intermediate, and is involved in the regeneration of the RuVI di-oxo complex leading to oxygen atom exchange. Distinct kinetics are obtained in the presence of water, and side reactions involved in catalyst deactivation have been identified.

Ti(III)-Catalyzed Anti-Markovnikov Reduction of Epoxides with Borohydride

We have developed a Ti catalyst that carries out the anti-Markovnikov reduction of a wide range of epoxides; [BH4]- is used as both the electron and the hydrogen atom source. It requires only mild conditions and accommodates a broad range of epoxide substrates. The Ti catalyst is readily available and is environmentally friendly.

Copper/Iodine Co-catalyzed Oxygenative Transannulation of Tryptamines Enables Direct Synthesis of Donaxaridine and Its Derivatives

We report a general copper/iodine co-catalyzed oxygenative transannulation strategy using readily available tryptamines. Molecular oxygen and water are used as oxygen sources and provide direct access to the donaxaridine scaffold and its derivatives. This methodology is applied to the efficient synthesis of the natural products donaxaridine, chimonamidine, donaxanine, donaxarine, and aline in just one or two steps. The tryptamines, albeit with oxy-sensitive dialkyl N-H groups, are selectively oxidized through a single-electron transfer dioxygenation process.

Markovnikov-Selective Cobalt-Catalyzed Wacker-Type Oxidation of Styrenes into Ketones under Ambient Conditions Enabled by Hydrogen Bonding

The replacement of palladium catalysts for Wacker-type oxidation of olefins into ketones by first-row transition metals is a relevant approach for searching more sustainable protocols. Besides highly sophisticated iron catalysts, all the other first-row transition metal complexes have only led to poor activities and selectivities. Herein, we show that the cobalt-tetraphenylporphyrin complex is a competent catalyst for the aerobic oxidation of styrenes into ketones with silanes as the hydrogen sources. Remarkably, under room temperature and air atmosphere, the reactions were exceedingly fast (up to 10 minutes) with a low catalyst loading (1 mol %) while keeping an excellent chemo- and Markovnikov-selectivity (up to 99 % of ketone). Unprecedently high TOF (864 h-1 ) and TON (5,800) were reached for the oxidation of aromatic olefins under these benign conditions. Mechanistic studies suggest a reaction mechanism similar to the Mukaiyama-type hydration of olefins with a change in the last fundamental step, which controls the chemoselectivity, thanks to a unique hydrogen bonding network between the ethanol solvent and the cobalt peroxo intermediate.

Ni-Fe bimetallic catalysts with high dispersion supported by SBA-15 evaluated for the selective oxidation of benzyl alcohol to benzaldehyde

A wetness impregnation method was used to impregnate the substrate with a substantial quantity of oleic acid together with a metal precursor, leading to significantly dispersed Ni-Fe bimetallic catalysts based on mesoporous SBA-15. Using a wide variety of characterization methods, such as XRD, BET, and TEM Analysis, the physiochemical properties of the catalyst were determined. The addition of the metal does not have any effect on the structural characteristics of the SBA-15 catalyst, as validated by transmission electron microscopy (TEM), which shows that the prepared SBA-15 supported catalyst has a hexagonal mesoporous structure. The catalytic capabilities of the Ni-Fe-SBA-15 catalysts were evaluated in the conversion of BzOH using tert-butyl hydroperoxide (TBHP) as an oxidant and acetonitrile as a solvent. The Ni/Fe-SBA-15 (NFS-15) catalytic composition is the best of the developed catalysts, with a maximum conversion of 98% and a selectivity of 99%. In-depth investigations were conducted into the molar ratio of TBHP to BzOH, the dosage of the catalyst, the reaction rate, temperature, and solvent. The recycling investigations indicate that the synthesized Ni/Fe-SBA-15 (NFS-15) catalyst seems to be more durable up to seven successive cycles.

Dioxygen concentration-dependent selective hydroxysulfonylation of olefins by rose bengal-sensitized photocatalysis

The synthesis of β-hydroxysulfones selectively in preference to β-ketosulfones by dye-sensitized photocatalysis is demonstrated by employing inexpensive and readily available olefins and sulfonyl hydrazides/N-hydroxy sulfonamides in the presence of oxygen. The facile hydroxysulfonylation reaction, which involves the use of rose bengal (RB) as a photocatalyst and dioxygen as an oxidant, permits access selectively to secondary and tertiary β-hydroxysulfones in good to excellent isolated yields at rt and is compatible with aryl, heteroaryl and alkyl sulfonyl hydrazides. Mechanistically, sulfonyl radicals are generated by a cascade of redox reactions, set off by the photocatalyst RB, between sulfonyl hydrazide and dioxygen. Attack of the sulfonyl radicals on olefins followed by oxygenation of the radical intermediates leads to hydroxysulfonylation products selectively without the requirement of a metal catalyst/additive/reductant/base, conforming to the tenets of sustainable chemistry. It is shown that the formations of β-hydroxysulfones and β-ketosulfones proceed concurrently through two different routes and that the outcome is crucially dependent on oxygen concentration with the former being formed predominantly under an oxygen atmosphere, a feature that is heretofore unprecedented to the best of our knowledge.

Continuous Flow Electrochemistry Enables Practical and Site-Selective C-H Oxidation

The selective oxygenation of ubiquitous C(sp3 )-H bonds remains a highly sought-after method in both academia and the chemical industry for constructing functionalized organic molecules. However, it is extremely challenging to selectively oxidize a certain C(sp3 )-H bond to afford alcohols due to the presence of multiple C(sp3 )-H bonds with similar strength and steric environment in organic molecules, and the alcohol products being prone to further oxidation. Herein, we present a practical and cost-efficient electrochemical method for the highly selective monooxygenation of benzylic C(sp3 )-H bonds using continuous flow reactors. The electrochemical reactions produce trifluoroacetate esters that are resistant to further oxidation but undergo facile hydrolysis during aqueous workup to form benzylic alcohols. The method exhibits a broad scope and exceptional site selectivity and requires no catalysts or chemical oxidants. Furthermore, the electrochemical method demonstrates excellent scalability by producing 115 g of one of the alcohol products. The high site selectivity of the electrochemical method originates from its unique mechanism to cleave benzylic C(sp3 )-H bonds through sequential electron/proton transfer, rather than the commonly employed hydrogen atom transfer (HAT).

Application of Iodine as a Catalyst in Aerobic Oxidations: A Sustainable Approach for Thiol Oxidations

Iodine is a well-known oxidant that is widely used in organic syntheses. Thiol oxidation by stoichiometric iodine is one of the most commonly employed strategies for the synthesis of valuable disulfides. While recent advancements in catalytic aerobic oxidation conditions have eliminated the need for stoichiometric oxidants, concerns persist regarding the use of toxic or expensive catalysts. In this study, we discovered that iodine can be used as a cheap, low-toxicity catalyst in the aerobic oxidation of thiols. In the catalytic cycle, iodine can be regenerated via HI oxidation by O2 at 70 °C in EtOAc. This protocol harnesses sustainable oxygen as the terminal oxidant, enabling the conversion of primary and secondary thiols with remarkable efficiency. Notably, all 26 tested thiols, encompassing various sensitive functional groups, were successfully converted into their corresponding disulfides with yields ranging from >66% to 98% at a catalyst loading of 5 mol%.

Theoretical investigation of solvent and oxidation/deprotonation effects on the electronic structure of a mononuclear Ru-aqua-polypyridine complex in aqueous solution

Mononuclear polypyridine ruthenium (Ru) complexes can catalyze various reactions, including water splitting, and can also serve as photosensitizers in solar cells. Despite recent progress in their synthesis, accurately modeling their physicochemical properties, particularly in solution, remains challenging. Herein, we conduct a theoretical investigation of the structural and electronic properties of a mononuclear Ru-aqua polypyridine complex in aqueous solution, considering five of its possible oxidation/protonation states species: [RuII(H2O)(py)(bpy)2]2+, [RuII(OH)(py)(bpy)2]+, [RuIII(H2O)(py)(bpy)2]3+, [RuIII(OH)(py)(bpy)2]2+ and [RuIV(O)(py)(bpy)2]2+, where py = pyridine and bpy = 2,2'-bipyridine. At first, we investigate the impact of proton-coupled and non-coupled electron transfer reactions on the geometry and electronic structure of the complexes in vacuum and in solution, using an implicit solvent model. Then, using a sequential multiscale approach that combines quantum mechanics and molecular mechanics (S-QM/MM), we examine the explicit solvent effects on the electronic excitations of the complexes, and compare them with the experimental results. The complexes were synthesized, and their absorption spectra measured in aqueous solution. To accurately describe the QM interactions between the metal center and the aqueous ligand in the MM simulations, we developed new force field parameters for the Ru atom. We analyze the solvent structure around the complexes and account for its explicit influence on the polarization and electronic excitations of the complexes. Notably, accounting for the explicit solvent polarization effects of the first solvation shells is essential to correctly describe the energy of the electronic transitions, and the explicit treatment of the hydrogen bonds at the QM level in the excitation calculations improves the accuracy of the description of the metal-to-ligand charge-transfer bands. Transition density matrix analysis is used to characterize all electronic transitions in the visible and ultraviolet ranges according to their charge-transfer (CT) character. This study elucidates the electronic structure of those ruthenium polypyridyl complexes in aqueous solution and underscores the importance of precisely describing solvent effects, which can be achieved employing the S-QM/MM method.

Enantioselective Transformations in the Synthesis of Therapeutic Agents

The proportion of approved chiral drugs and drug candidates under medical studies has surged dramatically over the past two decades. As a consequence, the efficient synthesis of enantiopure pharmaceuticals or their synthetic intermediates poses a profound challenge to medicinal and process chemists. The significant advancement in asymmetric catalysis has provided an effective and reliable solution to this challenge. The successful application of transition metal catalysis, organocatalysis, and biocatalysis to the medicinal and pharmaceutical industries has promoted drug discovery by efficient and precise preparation of enantio-enriched therapeutic agents, and facilitated the industrial production of active pharmaceutical ingredient in an economic and environmentally friendly fashion. The present review summarizes the most recent applications (2008-2022) of asymmetric catalysis in the pharmaceutical industry ranging from process scales to pilot and industrial levels. It also showcases the latest achievements and trends in the asymmetric synthesis of therapeutic agents with state of the art technologies of asymmetric catalysis.

Aminoisophthalate Bridged Cd(II)-2D Coordination Polymer: Structure Description, Selective Detection of Pd2+ in Aqueous Medium, and Fabrication of Schottky Diode

Photoluminescence activity of coordination polymers (CPs) has evoked intricate applications in the field of materials science, especially sensing of ions/molecules. In the present study, 2,3,5,6-tetrakis(2-pyridyl)pyrazine (tppz) and 5-aminoisophthalate (HAIPA^-) coordinated to Cd(II) to architect a coordination polymer, {[Cd(HAIPA)(tppz)(OH)]·3H₂O}_n (CP1) which unveils blue emission in an aqueous acetonitrile (98% aqueous) suspension. The emission is selectively quenched by Pd²⁺ only without interference in the presence of as many as 16 other cations. The structure of CP1 shows the presence of a free -COOH group, and the interlayer (-CO)O(2)···O(7) (OC-) distance, 4.242 Å, along with the π···π interactions (3.990, 3.927 Å), may make a cavity which suitably accommodates only Pd²⁺ (van der Waal's radius, 1.7 Å) through the Pd(II)-carboxylato (-COO-Pd) coordination. The stability of the composite, [CP1 + Pd²⁺] may be assessed from the fluorescence quenching experiment, and the Stern-Volmer constant (K_SV) is 7.2 × 10⁴ M^-1. Therefore, the compound, CP1, is a promising sensor for Pd(II) in a selective manner with limit of detection (LOD), 0.08 μM. The XPS spectra of CP1 and [CP1 + Pd²⁺] have proven the presence of Pd²⁺ in the host and the existence of a coordinated -COO-Pd bond. Interestingly, inclusion of Pd²⁺ in CP1 decreases the band gap from 3.61 eV (CP1) to 3.05 eV ([CP1 + Pd²⁺]) which lies in the semiconducting region and has exhibited improved electrical conductivity from 7.42 × 10^-5 (CP1) to 1.20 × 10^-4 S m^-1 ([CP1 + Pd²⁺]). Upon light irradiation, the electrical conductivities are enhanced to 1.45 × 10^-4 S m^-1 (CP1) and 3.81 × 10^-4 S m^-1 ([CP1 + Pd²⁺]); which validates the highly desired photoresponsive device applications. Therefore, such type of materials may serve as SDG-army (sustainable development goal) to battle against the environmental issues and energy crisis.

Carboxymethyl cellulose nanocolloids anchored Pd(0) nanoparticles (CMC@Pd NPs): synthesis, characterization, and catalytic application in transfer hydrogenation

Herein, we report on the preparation of novel colloidal system based on carboxymethyl cellulose (CMC) and Pd nanoparticles (CMC@Pd NPs) via an ecofriendly auto-reduction process under mild conditions. In the first step, the follow-up of reduction and preparation of CMC anchored palladium nanoparticles (Pd NPs) in aqueous solution was carried out using UV-Vis spectroscopy. Thereafter, the monodispersed colloids were fully characterized by advanced analytical, structural, and morphological techniques. Based on Scherrer equation, the as-synthesized CMC@Pd NPs crystallite size was about 10.88 nm. Accordingly, the detailed microscopic study revealed CMC nanocolloids anchored uniform distribution of Pd NPs and the presence of CMC nanofilm as protective monolayer. To the best of our knowledge, the observed nanoscale properties are reported for the first time for CMC-M system. The performance of the as-synthesized CMC@Pd nanocolloids was first investigated in the reduction of 4-nitrophenol, as a model substrate, to 4-aminophenol using NaBH4 as a hydrogen source. Moreover, the catalytic reduction of various nitroarenes bearing electron withdrawing or donating substituents was carried out and monitored by UV-Vis spectroscopy. The chemo- and regioselectivity of the catalytic reduction in presence of CMC@Pd NPs were also studied. Consequently, the prepared CMC@Pd nanocolloids exhibit remarkable activity, good heterogeneity, and higher reusability and stability for the catalytic reduction reaction under mild conditions.

Efficient Photo-Assisted Thermal Selective Oxidation of Toluene Using N-Doped TiO2

Selective oxidation of toluene is a key reaction to produce high value-added products but remains a big challenge. In this study, we introduce a nitrogen-doped TiO₂ (N-TiO₂) catalyst to create more Ti³⁺ and oxygen vacancy (O_V), which act as active sites for selective oxidation of toluene via activating O₂ to superoxide radical (•O₂^-). Interestingly, the resulting N-TiO₂-2 exhibited an outstanding photo-assisted thermal performance with a product yield of 209.6 mmol·g_cat^-1 and a toluene conversion of 10960.0 μmol·g_cat^-1·h^-1, which are 1.6 and 1.8 times greater than those obtained under thermal catalysis. We showed that the enhanced performance under photo-assisted thermal catalysis was attributed to more active species generation by making full use of photogenerated carriers. Our work suggests a viewpoint to apply a noble-metal-free TiO₂ system in the selective oxidation of toluene under solvent-free conditions.

Transition Metal-Catalyzed C-H Functionalization Through Electrocatalysis

Electrochemically promoted transition metal-catalyzed C-H functionalization has emerged as a promising area of research over the last few decades. However, development in this field is still at an early stage compared to traditional functionalization reactions using chemical-based oxidizing agents. Recent reports have shown increased attention on electrochemically promoted metal-catalyzed C-H functionalization. From the standpoint of sustainability, environmental friendliness, and cost effectiveness, electrochemically promoted oxidation of a metal catalyst offers a mild, efficient, and atom-economical alternative to traditional chemical oxidants. This Review discusses advances in the field of transition metal-electrocatalyzed C-H functionalization over the past decade and describes how the unique features of electricity enable metal-catalyzed C-H functionalization in an economic and sustainable way.

Oxidative Cleavage of Csp3-Csp2 and Csp3-H Bonds with KOtBu: Highly Robust and Practical Synthesis of Diaryl/(het-Ar) Ketones

Herein, we report an efficient and practical approach for synthesizing diaryl(het) ketones from R-CO-CHR-Ar through a simultaneous oxidative cleavage of C-C and C-H bonds using KO^tBu. This method enables synthesizing a variety of unsymmetrical and symmetrical (hetero)aryl ketones in excellent yields, which are otherwise difficult to make. Besides, we synthesized natural products using this method.

Hybrid Materials Based on Imidazo[4,5-b]porphyrins for Catalytic Oxidation of Sulfides

Heterogenized metalloporphyrin catalysts for oxidation reactions are extensively explored to improve chemical production. In this work, manganese meso-tetraarylporphyrins were immobilized on hydrated mesoporous titanium dioxide (SBET = 705 m2 g−1) through carboxylate or phosphonate anchoring groups separated from the macrocycle by the 2-arylimidazole linker fused across one of the pyrrolic rings of the macrocycle. The element composition of two mesoporous hybrid materials thus obtained were investigated and the integrity of the immobilized complexes was shown by different physicochemical methods. Finally, the catalytic efficiency of the more stable material Mn(TMPIP)/TiO2 with the phosphonate anchor was evaluated in the selective oxidation of sulfides to sulfoxides by molecular oxygen in the presence of isobutyraldehyde (IBA). The heterogenized complex has shown excellent catalytic activity exhibiting a turnover (TON) of ~1100 in a single catalytic run of the sulfoxidation of thioanisole. The catalyst was successfully reused in seven consecutive catalytic cycles.

Bienzymatic Cascade Combining a Peroxygenase with an Oxidase for the Synthesis of Aromatic Aldehydes from Benzyl Alcohols

Aromatic aldehydes are important aromatic compounds for the flavour and fragrance industry. In this study, a parallel cascade combining aryl alcohol oxidase from Pleurotus eryngii (PeAAOx) and unspecific peroxygenase from the basidiomycete Agrocybe aegerita (AaeUPO) to convert aromatic primary alcohols into high-value aromatic aldehydes is proposed. Key influencing factors in the process of enzyme cascade catalysis, such as enzyme dosage, pH and temperature, were investigated. The universality of PeAAOx coupled with AaeUPO cascade catalysis for the synthesis of aromatic aldehyde flavour compounds from aromatic primary alcohols was evaluated. In a partially optimised system (comprising 30 μM PeAAOx, 2 μM AaeUPO at pH 7 and 40 °C) up to 84% conversion of 50 mM veratryl alcohol into veratryl aldehyde was achieved in a self-sufficient aerobic reaction. Promising turnover numbers of 2800 and 21,000 for PeAAOx and AaeUPO, respectively, point towards practical applicability.

Revisiting the Mukaiyama-type epoxidation for the conversion of styrene into styrene carbonate in the presence of O2 and CO2

Alkene epoxidation using the Mukaiyama process involving O2 and a sacrificial aldehyde, as the first step of the global alkene oxidative carboxylation, does not necessarily require a metal catalyst.

Innovative green oxidation of amines to imines under atmospheric oxygen

In recent years, the development of environmentally benign molecular construction methods has been of great importance, and especially, resource recycling, high atomic efficiency, and low environmental impact are in high demand. From this point of view, attention has also been focused on the development of one-pot synthesis of pharmaceuticals and functional molecules. Imines are excellent synthetic intermediates of these useful molecules, and the environmentally friendly oxidative synthesis of imines from amines has been energetically developed using oxygen (or air), which is abundantly available on the Earth, as an oxidant. This review focuses on the latest innovative and green oxidation systems of amines to imines under atmospheric oxygen, and their application to one-pot/eco-friendly and sustainable synthesis of pharmaceuticals and functional molecules. In particular, catalytic systems that activate molecular oxygen are categorized and described in detail as transition metal catalytic systems, photoirradiated catalytic systems, and organocatalytic systems.

Aerial Oxidation of Phenol/Catechol in the Presence of Catalytic Amounts of [(Cl)2Mn(RCOOET)], RCOOET= Ethyl-5-Methyl-1-(((6-Methyl-3-Nitropyridin-2-yl)Amino)Methyl)-1H-Pyrazole-3-Carboxylate

In this work, we report on the catalytic activity of a manganese complex [(Cl)2Mn(RCOOET)], where RCOOET is ethyl-5-methyl-1-(((6-methyl-3-nitropyridin-2-yl)amino)methyl)-1H-pyrazole-3-carboxylate, in the oxidation of phenol or catechol by atmospheric oxygen to form o-quinone. The [(Cl)2Mn(RCOOET)] catalyzes the oxidation of catechol at a rate of 3.74 µmol L−1 min−1 in tetrahydrofuran (THF), in a similar manner to catecholase or tyrosinase.

Mesoporous SBA-15 supported gold nanoparticles for solvent-free oxidation of cyclohexane: superior catalytic activity with higher cyclohexanone selectivity

Surface modification of mesoporous SBA-15 with (3-mercaptopropyl) trimethoxysilane greatly enhances its capability to adsorb the tetrachloroauric anion (AuCl₄^-). The calcination of the sample after the adsorption experiment led to the generation of homogeneously dispersed, spherical, single crystalline gold nanoparticles (Au⁰ NPs) of less than 5 nm size, embedded on SBA-15 as observed from the TEM images. The as-prepared SBA-15/Au⁰ nanohybrid material has offered excellent catalytic activity for the selective oxidation of cyclohexane using TBHP as the oxidant in the absence of any solvent. A maximum of 48.7% cyclohexane conversion was achieved and surprisingly, cyclohexanone (K) has much higher selectivity (>95%) than cyclohexanol (A). The hot-filtration study confirmed the leach-resistant characteristics as well as the true heterogeneous catalytic activity of the SBA-15/Au⁰ nanohybrid catalyst. The catalyst was recycled up to four times without significant loss in its catalytic activity.

Sustainable Wacker-Type Oxidations

The Wacker reaction is the oxidation of olefins to ketones and typically requires expensive and scarce palladium catalysts in the presence of an additional copper co-catalyst under harsh conditions (acidic media, high pressure of air/dioxygen, elevated temperatures). Such a transformation is relevant for industry, as shown by the synthesis of acetaldehyde from ethylene as well as for fine-chemicals, because of the versatility of a carbonyl group placed at specific positions. In this regard, many contributions have focused on controlling the chemo- and regioselectivity of the olefin oxidation by means of well-defined palladium catalysts under different sets of reaction conditions. However, the development of Wacker-type processes that avoid the use of palladium catalysts has just emerged in the last few years, thereby paving the way for the generation of more sustainable procedures, including milder reaction conditions and green chemistry technologies. In this Minireview, we discuss the development of new catalytic processes that utilize more benign catalysts and sustainable reaction conditions.

Kinetics of chromium(V)-oxo and chromium(IV)-oxo porphyrins: Reactivity and mechanism for sulfoxidation reactions

In this work, chromium(IV)-oxo porphyrins [Cr^IV(Por)(O)] (2) (Por = porphyrin) were produced either by oxidation of [Cr^III(Por)Cl] (1) with iodobenzene diacetate or visible light photolysis of porphyrin‑chromium(III) chlorates. Subsequent oxidation of 2 with silver perchlorate gave chromium(V)-oxo porphyrins [Cr^V(Por)(O)](ClO₄) (3) in three porphyrin ligands, including 5,10,15,20-tetramesitylporphyrin(TMP, a), 5,10,15,20-tetrakis(2,6-difluorophenyl)porphyrin(TDFPP, b), and 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPFPP, c). Complexes 2 and 3 reacted with thioanisoles to produce the corresponding sulfoxides, and their kinetics of sulfoxidation reactions with a series of aryl methyl sulfides(thioanisoles) were studied in organic solutions. Chromium(V)-oxo porphyrins are several orders of magnitudes more reactive than chromium(IV)-oxo species, and representative second-order rate constants (k_ox) for the oxidation of thioansole are (0.40 ± 0.01) M^-1 s^-1 (3a), and (2.82 ± 0.20) × 10² M^-1 s^-1 (3b), and (2.20 ± 0.01) × 10³ M^-1 s^-1 (3c). The order of reactivity for 2 and 3 follows TPFPP > TDFPP > TMP, in agreement with the electrophilic nature of metal-oxo complexes. Hammett analyses indicate significant charge transfer in the transition states for oxidation of para-substituted thioanisoles by [Cr^V(Por)(O)]⁺. The ρ⁺ constants are -1.69 for 3a, -2.63 for 3b, and - 2.89 for 3c, respectively, mirror values found previously for related metal-oxo species. A mechanism involving the electrophilic attack of the Cr^V-oxo at sulfides to form a sulfur cation intermediate in the rate-determining step is suggested. Competition studies with chromium(III) porphyrin chloride and PhI(OAc)₂ gave relative rate constants for oxidations of competing thioanisoles that closely match ratios of absolute rate constants from chromium(V)-oxo species, which are true oxidants under catalytic conditions.

Probing oxygen activation on plasmonic photocatalysts

In this work we present an assay to probe the oxygen activation rate on plasmonic nanoparticles under visible light. Using a superoxide-specific XTT molecular probe, the oxygen activation rate on bimetallic gold-silver "rainbow" nanoparticles with a broadband visible light (> 420 nm) response, is determined at different light intensities by measuring its conversion into the colored XTT-formazan derivate. A kinetic model is applied to enable a quantitative estimation of the rate constant, and is shown to match almost perfectly with the experimental data. Next, the broadband visible light driven oxygen activation capacity of this plasmonic rainbow system, supported on nano-sized SiO2, is demonstrated towards the oxidation of aniline to azobenzene in DMSO. To conclude, a brief theoretical discussion is devoted to the possible mechanisms behind such plasmon-driven reactions.

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Soybean Oil Epoxidation Catalyzed by a Functionalized Metal–Organic Framework with Active Dioxo-Molybdenum (VI) Centers

In this work, a functionalized gallium metal–organic framework with active dioxo-molybdenum (VI) centers was evaluated as a catalyst in the epoxidation of soybean oil using tert-butyl-hydroperoxide as an oxidizing agent. The influence of the reaction time, temperature, and concentration of the oxidizing agent was studied, and it was demonstrated that the highest epoxide selectivity was obtained at 110 °C after 4 h of reaction (29% conversion and 91% selectivity) using a soybean oil/oxidizing agent ratio of 1/2. The stability of the metal–organic framework was confirmed by infrared spectroscopy, X-ray powder diffraction, thermogravimetric analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy EDS. The stability tests demonstrated that the catalyst could be reused in the catalytic process for the recovery of vegetable oils.

Graphical Abstract