Water: Nature’s Reaction Enforcer—Comparative Effects for Organic Synthesis “In-Water” and “On-Water”

Electrochemically promoted thio-Michael addition of N-substituted maleimides to thiols in an aqueous medium

A stable and practical electrochemical method was developed to promote the thio-Michael addition of N-substituted maleimides to various thiols in an aqueous medium. This protocol was found to be excellent in terms of facile scale-up, oxidant- and catalyst-free conditions, broad substrate scopes, good functional group tolerance, and easily available substrates. Notably, a plausible reaction mechanism was derived from the results of a series of control experiments and CV studies, which indicated that a radical pathway might speed up the thio-Michael addition under constant current.

Onset of Nitriles Hydration with an Environmentally Benign Catalyst: in-Water versus on-Water Conditions

The reaction yield of nitriles hydration using a catalyst depends on the aqueous medium. Using ab initio molecular dynamics, we probed whether "in-water" (in bulk medium) or "on-water" (at the interface with vacuum) conditions can change the onset of the reaction. Investigating a hydrogen-bond mediated mechanism, the lifetimes of the intermolecular interaction between benzonitrile and choline in the two protocols were compared, and the diffusion of the hydroxide anion around the cyano group was discussed.

Selective Adsorbent Design with Multifunctional Surfaces: Innovating Solutions for Heterogeneous Catalysis in Water

Heterogeneous catalytic systems with water as the solvent often have the disadvantage of cross-contamination, while concerns about the purification and workup of the aqueous phase after reactions are rare in the lab or industry. In this context, designing and developing the functional selective solid adsorbent and revealing the adsorption mechanism can provide a new strategy and guidelines for constructing supported heterogeneous catalysts to address these issues. Herein, we report the stable composite adsorbent (Fe/ATP@PPy: magnetic Fe3O4/attapulgite with the polypyrrole shell) that features an integrated multifunctional surface, which can effectively tune the selective adsorption processes for Cu2+, Co2+, and Ni2+ ions and nitrobenzene via the cooperative chemisorption/physisorption in an aqueous system. The adsorption experiments showed that Fe/ATP@PPy displayed significantly higher adsorption selectivity for Ni2+ than Cu2+ and Co2+ ions, especially which exhibited an approximate 100.00% removal for both Ni2+ ions and nitrobenzene in the mixture system with a low concentration. Furthermore, combined tracking adsorption of Ni2+ ions and X-ray photoelectron spectroscopy characterization confirmed that the effective adsorption occurs via ion transfer coordination; the pathway was further validated at the molecular level through theoretical modeling. In addition, the selective adsorption mechanism was proposed based on the adsorption experiment, characterization, and the corresponding density functional theory calculation.

Theoretical Study on the Reaction between Carcinogenic 2,5-Dichloro-1,4-benzoquinone and tert-Butyl Hydroperoxide: Self-Catalysis and Water Catalysis

The potentially carcinogenic halobenzoquinones (HBQs) have been recently identified in drinking water as disinfection byproducts. Several radical intermediates in the reaction of 2,5-dichloro-1,4-benzoquinone (DCBQ) and t-butyl hydroperoxide (t-BuOOH), which may induce DNA damage, were detected experimentally, and metal-independent decomposition reactions of t-BuOOH by DCBQ were proposed. It has not yet been confirmed by theoretical calculations. The theoretical study in this work provides insights into the details of the reaction. An unprecedented self-catalysis mechanism of organic hydroperoxides, that is, the reactant t-BuOOH also has a catalytic effect, was uncovered at the molecular level. Moreover, as the solvent, water molecules also clearly have an efficient catalytic effect. Due to the catalysis of t-BuOOH and water, the metal-independent reaction of t-BuOOH and DCBQ can occur under moderate conditions. Our findings about the novel catalytic effect of organic hydroperoxides t-BuOOH could offer a unique perspective into the design of new catalysts and an understanding of the catalytic biological, environmental, and air pollution reactions. Furthermore, organic hydroperoxide t-BuOOH could serve as a proton shuttle, where the proton transfer process is accompanied by simultaneous charge transfer. Therefore, organic hydroperoxides may disrupt the vital proton transfer process in biological systems and may give rise to unexpected toxicity.

A Phosphine-Free Air-Stable Mn(II)-Catalyst for Sustainable Synthesis of Quinazolin-4(3H)-ones, Quinolines, and Quinoxalines in Water

The synthesis, characterization, and catalytic application of a new phosphine-free, well-defined, water-soluble, and air-stable Mn(II)-catalyst [Mn(L)(H2O)2Cl](Cl) ([1]Cl) featuring a 1,10-phenanthroline based tridentate pincer ligand, 2-(1H-pyrazol-1-yl)-1,10-phenanthroline (L), in dehydrogenative functionalization of alcohols to various N-heterocycles such as quinazolin-4(3H)-ones, quinolines, and quinoxalines are reported here. A wide array of multisubstituted quinazolin-4(3H)-ones were prepared in water under air following two pathways via the dehydrogenative coupling of alcohols with 2-aminobenzamides and 2-aminobenzonitriles, respectively. 2-Aminobenzyl alcohol and ketones bearing active methylene group were used as coupling partners for synthesizing quinoline derivatives, and various quinoxaline derivatives were prepared by coupling vicinal diols and 1,2-diamines. In all cases, the reaction proceeded smoothly using our Mn(II)-catalyst [1]Cl in water under air, affording the desired N-heterocycles in satisfactory yields starting from cheap and readily accessible precursors. Gram-scale synthesis of the compounds indicates the industrial relevance of our synthetic strategy. Control experiments were performed to understand and unveil the plausible reaction mechanism.

Cycloaddition reactions via "on water" protocol reactions: A density functional theory study

In this work, the reactions of quadricyclane with dimethyl azodicarboxylate (DMAD) and of quadricyclane with diethyl azodicarboxylate (DEAD) in gas phase and in water environments were studied by a first-principles investigation within the framework of auxiliary density functional theory (ADFT). For these type of organic reactions is known that water is required to accelerate them. Since the reason of why this occur is still unknown, this work aims to gain insight into this reaction mechanism. For this investigation, the generalized gradient approximation as well as a hybrid functional were employed. The obtained optimized structures for the reactants, of the products and of the transition states are reported, together with the corresponding frequency analysis results and the reaction profiles. Along the proposed concerted reaction mechanism, a critical points search of the electron density and a charge analysis were performed. The calculated potential energy barriers of these reactions in gas phase and in water environments are compared. In agreement with experiment, the obtained results indicate that both reactions occur faster in water than in gas phase. This study shows that there is a change in the polarity of the two most important carbon atoms of the formed compounds along the reactions and that the decrease of the activation energy barrier which occurs in liquid phase in these reactions is because the structures of the main transition states are stabilized by the water environment. Therefore, the here obtained results demonstrate the important role played by the water-molecule framework into the activation energy barrier and structures of the molecules that participate in the DMAD and DEAD cycloaddition reactions.

Water-enabling strategies for asymmetric catalysis

Water possesses unique advantages, including abundance, environmental friendliness and mild effects. Undoubtedly, it is an ideal solvent or reagent in chemical syntheses. Water also shows unique abilities in catalytic asymmetric synthesis. It can accelerate reaction rates, improve diastereo- or enantioselectivities, initiate reactions, diversify chemo, diastereo- or enantioselectivities through various effects (hydrophobic, hydrogen bonding, protonation). Several reviews have demonstrated the positive effects of water in asymmetric synthesis. In this review, we summarize water-enabling strategies in the last decade, and focus on advances which reveal how water affects a reaction.

Interfacial chemical reactivity enhancement

Interfacial enhancements of chemical reaction equilibria and rates in liquid droplets are predicted using a combined theoretical and experimental analysis strategy. Self-consistent solutions of reaction and adsorption equilibria indicate that interfacial reactivity enhancement is driven primarily by the adsorption free energy of the product (or activated complex). Reactant surface activity has a smaller indirect influence on reactivity due to compensating reactant interfacial concentration and adsorption free energy changes, as well as adsorption-induced depletion of the droplet core. Experimental air-water interfacial adsorption free energies and critical micelle concentration correlations provide quantitative surface activity estimates as a function of molecular structure, predicting an increase in interfacial reactivity with increasing product size and decreasing product polarity, aromaticity, and charge (but less so for anions than cations). Reactions with small, neutral, or charged products are predicted to have little reactivity enhancement at an air-water interface unless the product is rendered sufficiently surface active by, for example, interactions with interfacial water dangling OH groups, charge transfer, or voltage fluctuations.

γ-Cyclodextrins as Supramolecular Reactors for the Three-component Aza-Darzens Reaction in Water

In recent decades, many efforts have been devoted to studying reactions catalyzed in nanoconfined spaces. The most impressive aspect of catalysis in nanoconfined spaces is that the reactivity of the molecules can be smartly driven to disobey classical behavior. A green and efficient three-component aza-Darzens (TCAD) reaction using a catalytic amount of γ-cyclodextrins (CDs) in water has been developed to synthesize N-phenylaziridines. CDs effectively performed this reaction in an environmentally friendly setting, achieving good yields. The same reaction was then performed using polymeric γ-CD such as a γ-cyclodextrin polymer crosslinked (GCDPC) with epichlorohydrin, a sponge-like macroporous γ-cyclodextrin-based cryogel (GCDC), and a γ-cyclodextrin-based hydrogel (GCDH). The homogeneous and heterogeneous catalyst recovery was then studied, and it was proved to be easily recycled several times without relevant activity loss. Water, as a unique and eco-friendly reaction medium, has been utilized for the first time, to the best of our knowledge, in this reaction. The inclusion of the reagents in CDs has been studied and rationalized by NMR spectroscopy experiments and molecular modeling calculations. The credit of the presented protocol includes good yields and catalyst reusability and precludes the use of organic solvents.

Accelerated photochemical reactions at oil-water interface exploiting melting point depression

Water can accelerate a variety of organic reactions far beyond the rates observed in classical organic solvents. However, using pure water as a solvent introduces solubility constraints that have limited the applicability of efficient photochemistry in particular. We report here the formation of aggregates between pairs of arenes, heteroarenes, enamines, or esters with different electron affinities in an aqueous medium, leading to an oil-water phase boundary through substrate melting point depression. The active hydrogen atoms in the reactants engage in hydrogen bonds with water, thereby accelerating photochemical reactions. This methodology realizes appealingly simple conditions for aqueous coupling reactions of complex solid molecules, including complex drug molecules that are poorly soluble in water.

Zwitterionic Aqua Palladacycles with Noncovalent Interactions for meta-Selective Suzuki Coupling of 3,4-Dichlorophenol and 3,4-Dichlorobenzyl Alcohol in Water

The site-selective reaction of substrates with multiple reactive sites has been a focus of the current synthetic chemistry. The use of attractive noncovalent interactions between the catalyst and substrate is emerging as a versatile approach to address site-selectivity challenges. Herein, we designed and synthesized a series of palladacycles, to control meta-selective Suzuki coupling of 3,4-dichlorophenol and 3,4-dichlorobenzyl alcohol. Noncovalent interactions directed zwitterionic aqua palladacycles catalyzed meta-selective Suzuki couplings of 3,4-dichloroarenes bearing hydroxyl in water have been developed. Experiments and density functional theory (DFT) calculations demonstrated that the electrostatic interactions play a critical role in meta-selective coupling of 3,4-dichlorophenol, while meta-selective coupling of 3,4-dichlorobenzyl alcohol arises due to the hydrogen-bonding interactions.

Radical Reactions in Organic Synthesis: Exploring in-, on-, and with-Water Methods

Radical reactions in water or aqueous media are important for organic synthesis, realizing high-yielding processes under non-toxic and environmentally friendly conditions. This overview includes (i) a general introduction to organic chemistry in water and aqueous media, (ii) synthetic approaches in, on, and with water as well as in heterogeneous phases, (iii) reactions of carbon-centered radicals with water (or deuterium oxide) activated through coordination with various Lewis acids, (iv) photocatalysis in water and aqueous media, and (v) synthetic applications bioinspired by naturally occurring processes. A wide range of chemical processes and synthetic strategies under different experimental conditions have been reviewed that lead to important functional group translocation and transformation reactions, leading to the preparation of complex molecules. These results reveal how water as a solvent/medium/reagent in radical chemistry has matured over the last two decades, with further discoveries anticipated in the near future.

Water vs. Organic Solvents: Water-Controlled Divergent Reactivity of 2-Substituted Indoles

Water is not a good solvent for most organic compounds, yet water can offer many benefits to some organic reactions, hence enriching organic chemistry. Herein, the unique divergent reactivity of 2-substituted indoles with ⋅NO sources is presented. The amount of water solvent was harnessed for a scalable, benign, and expedient synthesis of indolenine oximes, albeit with water's inability to dissolve the reactants. 2-Methoxyethyl nitrite, which has been tailored for reactions in water, empowered this protocol by enhancing the product selectivity. We further report on chemoselective transformations of the products that rely on their structural features. Our findings are expected to offer access to an underexplored chemical space. The platform is also applicable to oximinomalonate synthesis. Mechanistic studies revealed the important role of water in the reversal of stability between oxime and nitroso compounds, promoting the proton transfer.

Transition-Metal-Catalyzed Directed C-H Functionalization in/on Water

Directing group assisted C-H bond functionalization using transition-metal-catalysis has emerged as a reliable synthetic tool for the construction of regioselective carbon-carbon/heteroatom bonds. Off late, "in/on water directed transition-metal-catalysis", though still underdeveloped, has appeared as one of the prominent themes in sustainable organic chemistry. This article covers the advancements, mechanistic insights and application of the sustainable directed C-H bond functionalization of (hetero)arenes in/on water in the presence of transition-metal-catalysis.

Reductive Amination of Levulinic Acid to Pyrrolidones: Key Step in Biomass Valorization towards Nitrogen-Containing Chemicals

Nowadays, the field of biomass conversion is gradually moving towards an encouraging stage. The preparation of nitrogen-containing chemicals using various biomass resources instead of fossil resources do not only reduce carbon emissions, but also diversify the products of biomass conversion, thus increasing the economic competitiveness of biomass refining systems. Levulinic acid (LA) can be used as a promising intermediate in biomass conversion for further synthesis of pyrrolidone via reductive amination. However, there are still many critical issues to be solved. Particularly, the specific effects of catalysts on the performance of LA reductive amination have not been sufficiently revealed, and the potential impacts of key conditional factors have not been clearly elucidated. In view of this, this review attempts to provide theoretical insights through an in-depth interpretation of the above key issues. The contribution of catalysts to the reductive amination of LA as well as the catalyst structural preferences for improving catalytic performance are discussed. In addition, the role of key conditional factors is discussed. The insights presented in this review will contribute to the design of catalyst nanostructures and the rational configuration of green reaction conditions, which may provide inspiration to facilitate the nitrogen-related transformation of more biomass platform molecules.

Access to 2-thio/selenoquinolines via domino reaction of isocyanides with sulfur and selenium in water

A domino reaction of o-alkenylaryl isocyanides with elemental sulfur and selenium in pure water was developed for the efficient and green synthesis of quinoline-2-thione and diquinolyl diselenide derivatives. Mechanistical investigation reveals that intramolecular nucleophilic addition of an alkenyl group to the in situ generated isothio/isoselenocyanate accounts for the formation of a quinoline-ring. Moreover, this transformation is also amendable for the convenient preparation of 2-fluoromethylthio-/seleno-quinolines by a one-pot three-component reaction.

Highly asymmetric aldol reaction of isatins and ketones catalyzed by chiral bifunctional primary-amine organocatalyst on water

Herein, we have reported an environmentally friendly asymmetric aldol reaction between isatins and ketones catalyzed by double-hydrogen-bonded primary amine organocatalysts on water under mild conditions. Enantioenriched 3-hydroxy-2-oxindoles were obtained in high yields (up to 99%) and excellent stereoselectivities (up to 99 : 1 dr and 99% ee) under optimal conditions. Furthermore, the model reaction involving isatin and cyclohexanone was successfully scaled to 10 mmol with no reduction in yield or stereoselectivity. In addition, the catalyst was recovered via simple filtration and was subsequently reused on water, which highlights its good application potential.

Nucleophilic Allylation of Acylsilanes in Water: An Effective Alternative to Functionalized Tertiary α-Silylalcohols

A nucleophilic allylation of acylsilanes in water was developed, generating versatile functionalized tertiary α-silyl alcohols in high yields. With the assistance of hydrogen bonding, a reaction model of less reactive acylsilane was achieved. Unlike the conventional strategy, transition metals and an additional Lewis acid catalyst were not required, and rate acceleration was observed in water.

Friedel-Crafts Reaction of Acylsilanes: Highly Chemoselective Synthesis of 1-Hydroxy-bis(indolyl)methanes and 1-Silyl-bis(indolyl)methanes Derivatives

A novel double Friedel-Crafts reaction of acylsilanes in water is described. This strategy enables synthesis of bis(indolyl)methane derivatives with 1-hydroxy or 1-silyl substituents in moderate to high yield. Compared to the 1-silyl-bis(indolyl)methane derivatives from indole substrate, 1-hydroxy-bis(indolyl)methane derivatives were synthesized from the 5-hydroxyindole, and the hydrogen bonds in the 5-hydroxyindole play a crucial role in regulating the reaction selectivity.

Theoretical study of electronic sum frequency generation spectroscopy to assess the buried interfaces

This article provides a comprehensive theoretical background of electronic sum frequency generation (ESFG), a second-order nonlinear spectroscopy technique. ESFG is utilized to investigate both exposed and buried interfaces, which are challenging to study using conventional spectroscopic methods. By overlapping two incident beams at the interface, ESFG generates a beam at the sum of their frequencies, allowing for the extraction of valuable interfacial molecular information such as molecular orientation and density of states present at interfaces. The unique surface selectivity of ESFG arises from the absence of inversion symmetry at the interfaces. However, detecting weak signals from interfaces requires the ultrafast lasers to generate a sufficiently strong signal. By understanding the theoretical foundations of ESFG presented in this article, readers can gain a solid grasp of the basics of ESFG spectroscopy.

Rationalizing and Adapting Water-Accelerated Reactions for Sustainable Flow Organic Processes

Water-accelerated reactions, wherein at least one organic reactant is not soluble in water, are an important class of organic reactions, with a potentially pivotal impact on sustainability of chemical manufacturing processes. However, mechanistic understanding of the factors controlling the acceleration effect has been limited, due to the complex and varied physical and chemical nature of these processes. In this study, a theoretical framework has been established to calculate the rate acceleration of known water-accelerated reactions, giving computational estimations of the change to ΔG^‡ which correlate with experimental data. In-depth study of a Henry reaction between N-methylisatin and nitromethane using our framework led to rationalization of the reaction kinetics, its lack of dependence on mixing, kinetic isotope effect, and different salt effects with NaCl and Na₂SO₄. Based on these findings, a multiphase flow process which includes continuous phase separation and recycling of the aqueous phase was developed, and its superior green metrics (PMI-reaction = 4 and STY = 0.64 kg L^-1 h^-1) were demonstrated. These findings form the essential basis for further in silico discovery and development of water-accelerated reactions for sustainable manufacturing.

Ion-Size Dependent Adsorption Crossover on the Surface of a Water Droplet

The adsorption of ionic and neutral spherical solutes on the surface of a liquid water droplet are investigated using molecular dynamics simulations and theoretical analyses. The results reveal a crossover in the sign of the adsorption free energy as a function of ion size, with ions larger than iodide predicted to be increasingly surface active. Adsorption free energies are decomposed into competing energetic and entropic contributions arising from direct solute-water interaction energy and its fluctuations. The entropically driven surface activity of large ions is predicted to increase with ion size, while small ions are typically driven away from the interface by a more delicate balance of energetic and entropic contributions, with a nonmonotonic ion size dependence linked to the ion's hydration-shell structure and stability. The physical interpretation of the results is illuminated by comparisons with dielectric linear response and cavity formation predictions and implications to interfacial acidity and enhanced chemical reactivity are discussed.

Catalyst-free C(sp3)-H functionalization of methyl azaarenes with heteroaromatic trifluoromethyl ketone hydrates: "all-water" synthesis of α-trifluoromethyl tertiary alcohols

An efficient catalyst-free C(sp³)-H bond functionalization of methyl azaarenes with heteroaromatic trifluoromethyl ketone hydrates in neat water has been developed for the synthesis of α-trifluoromethyl tertiary alcohols bearing N-heteroaromatics. This method not only features excellent efficiency, broad substrate scope, catalyst-free conditions, and easy gram-scale preparation but also represents a new and rare example of "all-water" synthesis of trifluoromethylated molecules.

Skeletal photoinduced rearrangement of diarylethenes: ethene bridge effects

A skeletal photorearrangement involving UV-induced 6π-electrocyclization of diarylethenes with various ethene bridges has been studied. It has been found that deprotonation is the predominant step among the three possible alternative reaction pathways (radical abstraction, deprotonation, or sigmatropic shift) following 6π-electrocyclization, and incorporation of an electronegative carbonyl group into the geminal position to the phenyl residue results in a reduction in the reaction time and an increase in the yield of the desired product. The significant increase in the reaction time in less polar solvents (toluene, TCM) also indicates a large contribution of the deprotonation step to the skeletal photorearrangement of diarylethenes. Performing the reaction in toluene in the presence of tertiary amines leads to a reduction in the reaction time and an increase in the yield of the desired product. The best results were achieved when the reaction was carried out in toluene in the presence of DIPEA. The experimental results are in good agreement with the DFT calculations.

Visible-light-induced organophotocatalytic and singlet oxygen-initiated domino construction of 1,4-dihydropyridines, C-3 functionalized spiro[indoline-3,4'-pyridines] and C-11 functionalized spiro[indeno-[1,2-b]quinoxaline-11,4'-pyridines]

A highly efficient pot, atom, and step economical method for the construction of pharmacologically potent structurally functionalized 1,4-dihydropyridines, quaternary centered C-3 functionalized spiro[indoline-3,4'-pyridines], and C-11 functionalized spiro[indeno[1,2-b]quinoxaline-11,4'-pyridines] via rose bengal photoredox catalysis under blue LED irradiation in an aqueous medium at room temperature has been developed. The products were isolated in excellent yields within a short reaction time for a variety of functional groups under transition metal- and ligand-free energy-efficient conditions in a green solvent system with high reaction mass efficiency and process mass intensity, which are the key advantages of the current work.

Pushing Photochemistry into Water: Acceleration of the Di-π-Methane Rearrangement and the Paternó-Büchi Reaction "On-Water"

Two representative organic photoreactions, namely a bimolecular photocycloaddition and a monomolecular photorearrangement, are presented that are accelerated when the reaction is performed "on-water", that is, at the water-substrate interface with no solvation of the reaction components. According to the established models of ground-state reactions "on-water", the enhanced efficiency of the photoreactions is explained by hydrophobic effects (Paternó-Büchi reaction) or specific hydrogen bonding (di-π-methane rearrangement) at the water-substrate interface that decrease the energy of the respective transition state. These results point to the potential of this approach to conduct photoreactions more efficiently in an ecologically favorable medium.

Synthesis of cyano-substituted γ-lactams through a copper-catalyzed cascade cyclization/cyanation reaction

A convenient copper-catalyzed cascade cyclization/cyanation reaction for the construction of cyano-containing γ-lactams was developed. The protocol employed TMSCN as the cyano source and proceeded in water under simple conditions. Mechanistic studies indicated this reaction involved an amidyl radical initiated cascade 5-exo-trig cyclization/cyanation process. It is capable of generating a series of cyano-substituted γ-lactams and relative 2-oxazolidinone derivatives with a broad substrate scope.

Brønsted acid catalyzed mechanochemical domino multicomponent reactions by employing liquid assisted grindstone chemistry

Here, we have demonstrated a metal-free energy-efficient mechanochemical approach for expedient access to a diverse set of 2-amino-3-cyano-aryl/heteroaryl-4H-chromenes, tetrahydrospiro[chromene-3,4'-indoline], 2,2'-aryl/heteroarylmethylene-bis(3-hydroxy-5,5-dimethylcyclohex-2-enone) as well as tetrahydro-1H-xanthen-1-one by employing the reactivity of 5,5-dimethylcyclohexane-1,3-dione/cyclohexane-1,3-dione with TsOH⋅H₂O as Brønsted acid catalyst under water-assisted grinding conditions at ambient temperature. The ability to accomplish multiple C-C, C=C, C-O, and C-N bonds from readily available starting materials via a domino multicomponent strategy in the absence of metal-catalyst as well as volatile organic solvents with an immediate reduction in the cost of the transformation without necessitates complex operational procedures, features the significant highlights of this approach. The excellent yield of the products, broad functional group tolerances, easy set-up, column-free, scalable synthesis with ultralow catalyst loading, short reaction time, waste-free, ligand-free, and toxic-free, are other notable advantages of this approach. The greenness and sustainability of the protocol were also established by demonstrating several green metrics parameters.

Graphene Encapsulated Low-Load Nitrogen-Doped Bimetallic Magnetic Pd/Fe@N/C Catalyst for the Reductive Amination of Nitroarene Under Mild Conditions

Aniline is a group of important platform molecules that has been widely used in the synthesis of other high-value chemicals and pharmaceutical products. How to produce high-value anilines as the high-value chemical intermediates more efficiently and environmentally has always been a research topic in the industry. Catalytic hydrogenation is an environmentally friendly method for preparing halogenated anilines. Traditional noble metal catalysts face the problems of cost and noble metals residue. To improve the purity of the product as well as the activity and recyclability of the catalyst, we prepared a Pd/Fe magnetic bimetallic catalyst supported on N-doped carbon materials to reduce nitrobenzene to aniline under mild conditions. The catalyst has a low Pd loading of 2.35%. And the prepared bimetallic Pd/Fe@N/C catalyst showed excellent catalytic reactivity with the nitrobenzene conversion rate of 99%, and the aniline selectivity of 99% under mild reaction conditions of 0.8 MPa H2 and 40 °C. A variety of halogenated and aliphatic nitro compounds were well tolerated and had been transformed to the corresponding target amine products with excellent selectivity. In addition, the novel N-doped graphene-encapsulated bimetallic magnetic Pd/Fe@N/C catalyst not only had magnetic physical properties, which was easy to separate, recover, and used for the recycling of the catalyst without metal leaching but also catalyzed highly selective reductive amination of aromatics was a green, economical and environmentally friendly reaction with the only by-product of H2O.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s10562-023-04273-7.

Acid-Promoted Direct C-H Carbamoylation at the C-3 Position of Quinoxalin-2(1H)-ones with Isocyanide in Water

Described herein is a concise and practical direct amidation at the C-3 position of quinoxalin-2(1H)-ones through an acid-promoted carbamoylation with isocyanide in water. In this conversion, environmentally friendly water and commercial inexpensive isocyanide were used as a solvent and carbamoylation reagent, respectively. This study not only provides a green and efficient strategy for the construction of 3-carbamoylquinoxalin-2(1H)-one derivatives that can be applied to the synthesis of druglike structures but also expands the application of isocyanide in organic chemistry.

Tuning the olefin-VOCs epoxidation performance of ceria by mechanochemical loading of coinage metal

Under the background of carbon dioxide emission reduction, how to realize the treatment and the high value-added conversion of typical olefin volatile organic compounds (olefin-VOCs), such as styrene, is a big challenge. In this contribution, the ceria-supported coinage metal catalysts (M/CeO₂, M = Au, Ag, and Cu) are successfully synthesized by a dry mechanochemical method, and their catalytic performance for styrene-VOC epoxidation with tert-butyl hydrogen peroxide (TBHP) as an oxidant to prepare high-value styrene oxide (SO) is investigated. The oxygen vacancies of ceria play a key role in the anchoring of metal nanoparticles. After ball milling, Au(III) is partially reduced and coexists on ceria in two valence states (Au³⁺ and Au⁰), and the reactive oxygen species of the as-prepared catalyst are enhanced. The catalytic behaviors, including solvents effect, substrate concentration, oxidant ratio, catalyst dosage, reaction time, and temperature, are systematically investigated. Au/CeO₂ exhibits good styrene epoxidation performance with a total styrene conversion of 94% and a SO yield of 63%, along with good reusability and substrate scalability. Thermodynamics and kinetics show that Au/CeO₂ was more favorable for styrene epoxidation and this reaction is dominated by the rate of intrinsic chemical reactions on the surface of the catalyst. Based on experimental discussions and a set of characterizations (XPS, XRD, in-situ FT-IR, ESR, ESI-HSMS, etc.), the mechanism is revealed as the synergistic catalysis between the reactive oxygen species of Au/CeO₂ and the peroxide radicals generated by the homolysis of TBHP.

Green and efficient one-pot three-component synthesis of novel drug-like furo[2,3–d]pyrimidines as potential active site inhibitors and putative allosteric hotspots modulators of both SARS-CoV-2 MPro and PLPro

In this paper, an environmentally benign, convenient, and efficient one-pot three-component reaction has been developed for the regioselective synthesis of novel 5-aroyl(or heteroaroyl)-6-(alkylamino)-1,3-dimethylfuro[2,3-d]pyrimidine-2,4(1H,3H)-diones (4a‒n) through the sequential condensation of aryl(or heteroaryl)glyoxal monohydrates (1a‒g), 1,3-dimethylbarbituric acid (2), and alkyl(viz. cyclohexyl or tert-butyl)isocyanides (3a or 3b) catalyzed by ultra-low loading ZrOCl₂•8H₂O (just 2 mol%) in water at 50 ˚C. After synthesis and characterization of the mentioned furo[2,3-d]pyrimidines (4a‒n), their multi-targeting inhibitory properties were investigated against the active site and putative allosteric hotspots of both SARS-CoV-2 main protease (M^Pro) and papain-like protease (PL^Pro) based on molecular docking studies and compare the attained results with various medicinal compounds which approximately in three past years were used, introduced, and or repurposed to fight against COVID-19. Furthermore, drug-likeness properties of the mentioned small heterocyclic frameworks (4a‒n) have been explored using in silico ADMET analyses. Interestingly, the molecular docking studies and ADMET-related data revealed that the novel series of furo[2,3-d]pyrimidines (4a‒n), especially 5-(3,4-methylendioxybenzoyl)-6-(cyclohexylamino)-1,3-dimethylfuro[2,3-d]pyrimidine-2,4(1H,3H)-dione (4g) as hit one is potential COVID-19 drug candidate, can subject to further in vitro and in vivo studies. It is worthwhile to note that the protein-ligand-type molecular docking studies on the human body temperature-dependent M^Pro protein that surprisingly contains zinc^II (Zn^II) ion between His41/Cys145 catalytic dyad in the active site, which undoubtedly can make new plans for designing novel SARS-CoV-2 M^Pro inhibitors, is performed for the first time in this paper, to the best of our knowledge.

Enantio- and Diastereoselective Michael Addition of Cyclic Ketones/Aldehydes to Nitroolefins in Water as Catalyzed by Proline-Derived Bifunctional Organocatalysts

New l-proline-derived bifunctional secondary amine organocatalysts were synthesized for enantioselective Michael reactions in water as a solvent. Application of these catalysts in Michael additions provided high yield (up to 97%) with high stereoselectivity (dr up to 99:1 and ee up to 99%). The effect of phenyl group at (R)-C₆ in the catalyst was investigated and played a key role in successful catalysis by density functional theory computational calculations. The synthetic utility of this reaction was demonstrated by the formal synthesis of Sch 50971, which is a novel histamine H₃ receptor agonist.

Radical annulation using a radical reagent as a two-carbon unit

Radical annulation has emerged as one of the most efficient and straightforward methods for synthesizing cyclic/polycyclic compounds as the core structures can be constructed through a single procedure comprising multiple bond-forming steps. Particularly, radical annulation using a radical reagent as a cyclization partner and two-carbon unit greatly expands the diversity of cyclic skeletons and the functionality of radical reagents. We herein have highlighted the representative processes reported in the past decade for radical annulation using a radical reagent as a two-carbon unit, including [2 + 2 + 2], [3 + 2], [4 + 2], and [5 + 2] modes, with an emphasis on their reaction mechanisms. These studies not only pave the way toward annulation but also provide insight into the exploration of a new reaction mode for radical chemistry.

da Silva VA, S. da Silva GF, Santos ECS, de S. Baêta E, Brant de Campos J, Carvalho NMF, Malta LFB, Senra JD. Mild and Rapid Light-Driven Suzuki-Miyaura Reactions Catalyzed by AuPd Nanoparticles in Water at Room Temperature

Organic reactions carried out in water under mild conditions are state-of-the-art in terms of environmentally benign chemical processes. In this direction, plasmonic catalysis can aid in accomplishing such tasks. In the present work, cyclodextrin-mediated AuPd bimetallic nanoparticles (NPs) were applied in room-temperature aqueous Suzuki-Miyaura reactions aiming at preparing biaryl products based on fluorene, isatin, benzimidazole and resorcinol, with yields of 77 % up to 95 %. AuPd NPs were revealed to be a physical mixture of Au and Pd particles circa 20 and 2 nm, respectively, through X-ray diffraction, dynamic light scattering, UV-Vis spectroscopy and transmission electron microscopy analyses.

Micellar Catalysis as a Tool for C-H Bond Functionalization toward C-C Bond Formation

Micelles generated upon dissolving surfactants in water can be employed as nanovessels for catalytic transformations, in the so-called micellar catalysis methodology. This review is focused on the use of micellar catalysis in the context of the catalytic functionalization of carbon-hydrogen bonds. The micelles accumulate catalyst and reactants in their inner volume in such a high local concentration that kinetics are favored. The consequence is that, in most cases, processes that in conventional organic solvents require high temperatures and long reaction times are achieved in milder conditions when micellar catalysis is employed.

Stereoselective Construction of Fluorinated Quaternary Stereogenic Centers via an Organocatalytic Asymmetric exo-Selective Diels-Alder Reaction in the Presence of Water

A catalytic, asymmetric Diels-Alder reaction of α-fluoro α,β-unsaturated aldehydes and cyclopentadiene was developed using diarylprolinol silyl ether as an organocatalyst. The reaction proceeds in toluene with trifluoroacetic acid as an additive (condition A). Perchloric acid salt of diarylprolinol silyl ether also promotes the reaction using water as a reaction medium (condition B). In both cases, excellent exo-selectivity and enantioselectivity were obtained with generation of a fluorinated quaternary chiral center.

Switchable aqueous catalytic systems for organic transformations

In living organisms, enzyme catalysis takes place in aqueous media with extraordinary spatiotemporal control and precision. The mechanistic knowledge of enzyme catalysis and related approaches of creating a suitable microenvironment for efficient chemical transformations have been an important source of inspiration for the design of biomimetic artificial catalysts. However, in "nature-like" environments, it has proven difficult for artificial catalysts to promote effective chemical transformations. Besides, control over reaction rate and selectivity are important for smart application purposes. These can be achieved via incorporation of stimuli-responsive features into the structure of smart catalytic systems. Here, we summarize such catalytic systems whose activity can be switched 'on' or 'off' by the application of stimuli in aqueous environments. We describe the switchable catalytic systems capable of performing organic transformations with classification in accordance to the stimulating agent. Switchable catalytic activity in aqueous environments provides new possibilities for the development of smart materials for biomedicine and chemical biology. Moreover, engineering of aqueous catalytic systems can be expected to grow in the coming years with a further broadening of its application to diverse fields.

Isocyanide-Based Multicomponent Reactions in Water: Advanced Green Tools for the Synthesis of Heterocyclic Compounds

Reaction rate acceleration using green methods is an intriguing area of research for chemists. In this regard, water as a "green solvent" plays a crucial role in the acceleration of some organic transformations and reveals exclusive selectivity and reactivity in comparison with conventional organic solvents. In particular, multicomponent reactions (MCRs) as sustainable tools lead to the rapid generation of small-molecule libraries in water and aqueous media due to the prominent role of the hydrophobic effect. MCRs, as diversity-oriented synthesis (DOS) methods, have great efficiency with simple operations, atom, pot, and step economy synthesis, and mechanistic beauty. Among diverse classes of MCRs, isocyanide-based multicomponent reactions (I-MCRs), as sustainable and versatile reactions, have gained considerable attention in the synthesis of diverse heterocycle rings, especially in drug design because of the peculiar nature of isocyanide as a particular active reactant. I-MCRs that are performed in water are mild, environmentally friendly, and easily controlled, and have a reduced number of workup, purification, and extraction steps, which fit well with the advantages of "green" chemistry. Performing these powerful organic transformations in water and aqueous media is accompanied by acceleration owing to negative activation volumes, which originate from connecting several reactants together to generate a single product. It should be noted that the combination of MCR strategy and aqueous phase reaction is of growing interest for the development of sustainable synthetic techniques in organic conversions. However, an exclusive account focusing on the recent progress in eco-friendly I-MCRs for the construction of heterocycles in water and aqueous media is particularly lacking. This review highlights the progress of various kinds of I-MCRs in water and aqueous media as benign methods for the efficient construction of vital heterocyclic scaffolds, with a critical discussion of the subject in the period 2000-2021. We hope that this themed collection will be of interest and beneficial for organic and pharmaceutical chemists and will inspire more reaction development in this fascinating field.

Hybrid Alginate-Brushite Beads Easily Catalyze the Knoevenagel Condensation On-Water

An innovative hybrid organic-inorganic material composed of alginate-brushite xerogel beads was successfully applied for the catalysis of the Knoevenagel condensation. The catalyst was derived from phosphated alginate xerogel microspheres formed from the ionotropic gelling effect of phosphated alginate. To this end, alginate was phosphated by the addition of diammonium hydrogen phosphate in a 1% w/w alginate gel. The phosphated alginate was subsequently precipitated by chelation of Ca²⁺ cations, generating a phosphated alginate hydrogel microsphere, which was washed and dried, forming hybrid organic-inorganic xerogel beads as a crystalline phosphate-rich mineral fraction covered by alginate. X-ray diffraction analysis revealed that the crystalline inorganic matrix of the material was composed predominantly of brushite. SEM analysis revealed plate-like, ribbon-like, or needle-like morphologies in the hybrid alginate-brushite beads. The hybrid material was tested as a catalyst for Knoevenagel condensation, which was performed ″on-water″ under mild conditions with aromatic aldehydes and activated methylene compounds, giving high yields (up to 97%). The reaction rate and product yield increased together with the reaction temperature for all reagents. The recyclable solid catalyst was effective for three runs, revealing the potential of the innovative hybrid catalyst as an eco-friendly heterogeneous catalyst.

Cyclization/hydrolysis of 1,5-enenitriles initiated by sulfonyl radicals in the aqueous phase in the presence of the I2/TBHP system

A novel cyclization/hydrolysis of 1,5-enenitriles for the synthesis of valuable pyrrolidine-2,4-diones in the aqueous phase using I₂ as the catalyst and tert-butyl hydroperoxide (TBHP) as the oxidant is reported. In the presence of the I₂/TBHP system, sulfonyl hydrazides produce sulfonyl radicals, which undergo radical addition, intramolecular cyclization, hydrogen abstraction, and hydrolysis to give the final products. The use of the inexpensive and environmentally friendly I₂/TBHP catalytic oxidation system in the aqueous phase makes it a benign and sustainable strategy.