Multinuclear Olefin Polymerization Catalysts

Studies on the Coordination Patterns of Diamine-Bridged Tetraphenoxy Ligands with Group 3 and 4 Metals

Alkane elimination reactions between the diamino- and dianilino-bridged tetrakis(phenolate) proligands 1a,b-H4 and precursors M(CH2SiMe3)3(THF)2, M(CH2C6H4-o-NMe2)3 (M = Sc and Y), and Hf(CH2Ph)4 were investigated. The diamino-bridged 1a-H4 afforded nonsymmetric complex 2a-Y2 incorporating two metal centers in different coordination environments. This one and other dinuclear compounds 2b-Sc2, 2a-Hf2, and 2b-Hf2 were characterized by NMR spectroscopy, elemental analysis, and X-ray diffraction study (for 2a-Y2 and 2b-Sc2) and turned out to be symmetric in solution. Compound 2a-Y2, upon treatment with 2 equiv of 2-phenylpyridine, afforded symmetric bis(aryl) product 3a-Y2, which was authenticated by NMR spectroscopy and X-ray crystallography. The mechanism of its formation was studied by DFT computations and presumably involves a cooperative reorganization process within the nonsymmetric parent 2a-Y2 to afford a symmetric isomer prior to its reaction with 2-phenylpyridine.

Dinuclear group IV metal complexes based on a bis(indenyl)-(E/Z)-stilbene platform: a potential prototype of "photoswitchable" catalysts for olefin polymerization

The preparation of dizirconium complexes based on a novel bis(indenyl)-(E/Z)-stilbene platform was explored. Negishi coupling between the in situ-generated diorganozincates obtained from the respective o/m/p-(E/Z)-dibromostilbenes and the bromo-functionalized zirconocene (η5-Cp*)(η5-2-methyl-4-bromoindenyl)ZrCl2, or, alternatively, the preparation of bis(indene)stilbene pro-ligands {o/m/p-(E/Z)-BisIndSB}H2 through Negishi coupling of the corresponding dibromostilbenes with 4-bromoindene and subsequent metallation/transmetallation with Cp*ZrCl3 or Zr(NMe2)4, allowed the preparation of a series of dinuclear complexes. These were analyzed by NMR spectroscopy and some of them by iASAP-mass spectrometry and by X-ray diffraction studies. Experimental results were compared with DFT modelling of the targeted dinuclear complexes evidencing that the (E)-complexes are more stable by 7-11 kcal mol-1 than their (Z)-analogues. Thermal, uncontrolled isomerization of (Z)- to (E)-stilbene platform was observed experimentally for some systems, in the course of their synthesis, either from the (Z)-dibromostilbene reagent or on the dinuclear complexes resulting from the Negishi coupling. Photoisomerization of the (E)- and (Z)-{BisIndSB}H2 proligands and of complexes {o-(E)-BisIndSB}(Zr(NMe2)3)2 and {m-(E)-BisIndSB}(ZrCl2Cp*)2 was investigated under a variety of conditions. It proved effective for the proligands but induced decomposition of the dizirconium complexes. Time-dependent DFT (TD-DFT) computations were performed to identify unambiguously the nature of the observed absorption bands and account for decomposition of the complexes. Preliminary ethylene/1-hexene homo- and copolymerization investigations did not evidence putative cooperativity phenomena within these dinuclear systems nor significantly differentiated behavior between the (Z)- and (E)-isomers of a given type of complex under the reaction conditions investigated.

A lithium-aluminium heterobimetallic dimetallocene

Homobimetallic dimetallocenes exhibiting two identical metal atoms sandwiched between two η5 bonded cyclopentadienyl rings is a narrow class of compounds, with representative examples being dizincocene and diberyllocene. Here we report the synthesis and structural characterization of a heterobimetallic dimetallocene, accessible through heterocoupling of lithium and aluminylene fragments with pentaisopropylcyclopentadienyl ligands. The Al-Li bond features a high ionic character and profits from attractive dispersion interactions between the isopropyl groups of the cyclopentadienyl ligands. A key synthetic step is the isolation of a cyclopentadienylaluminylene monomer, which also enables the structural characterization of this species. In addition to their structural authentication by single-crystal X-ray diffraction analysis, both compounds were characterized by multinuclear NMR spectroscopy in solution and in the solid state. Furthermore, reactivity studies of the lithium-aluminium heterobimetallic dimetallocene with an N-heterocyclic carbene and different heteroallenes were performed and show that the Al-Li bond is easily cleaved.

Solution Structure and Dynamics of Hf-Al and Hf-Zn Heterobimetallic Adducts Mimicking Relevant Intermediates in Chain Transfer Reactions

Cationic cyclometalated hafnocenes [CpPrCpCH2CH2CH2Hf][B(C6F5)4] (4Pr) and [CpiBuCpCH2CH(Me)CH2Hf][B(C6F5)4] (4aiBu and 4biBu) were synthesized from the corresponding [(CpPr)2HfMe][B(C6F5)4] (1Pr) and [(CpiBu)2HfMe][B(C6F5)4] (1iBu) complexes via C-H activation. 4aiBu, 4biBu, and 4Pr, mimicking a propagating M-polymeryl species (M = transition metal) with or without a β-methyl branch on the metalated chains, serve to investigate whether and how the nature of the last inserted olefin molecules changes the structure, stability, and reactivity of the corresponding heterobimetallic complexes, formed in the presence of aluminum- or zinc-alkyl chain transfer agents (CTAs), which are considered relevant intermediates in coordinative chain transfer polymerization (CCTP) and chain shuttling polymerization (CSP) technologies. NMR and DFT data indicate no major structural difference between the resulting heterobridged complexes, all characterized by the presence of multiple α-agostic interactions. On the contrary, thermodynamic and kinetic investigations, concerning the reversible formation and breaking of heterobimetallic adducts, demonstrate that isomer 4aiBu, in which the β-Me is oriented away from the reactive coordination site on Hf, but not 4biBu, having the β-Me pointing in the opposite direction, is capable of reacting with CTAs. Quantification of kinetic rate constants highlights that the formation process is rate limiting and that the nature of the last inserted α-olefin unit modulates transalkylation kinetics. The reaction of 4aiBu, 4biBu, and 4Pr with diisobutylaluminum hydride (DiBAlH) allows the interception and characterization of new heterobinuclear and heterotrinuclear species, featuring both hydride and alkyl bridging moieties, which represent structural models of elusive intermediates in CCTP and CSP processes, capturing the instant when an alkyl chain has just transferred from a transition metal to a main group metal, while the two metals remain engaged in a single heterobimetallic intermediate.

Gold-Catalyzed Reactions of Enynals with Alkenes for Synthesis Binaphthyl Derivatives

A PPh3Au[B(C6F5)4]-catalyzed reaction of enynals and alkenes for the construction of binaphthyl derivatives was described. This transformation was achieved through o-Quinodimethane (o-QDM) intermediate's extended conjugated addition process. The reaction has the advantages of wide substrate scopes, mild reaction conditions, high efficiency, and good scalability.

Modeling Complex Ligands for High Oxidation State Catalysis: Titanium Hydroamination with Unsymmetrical Ligands

A method for modeling high oxidation state catalysts is used on precatalysts with unsymmetrical and symmetrical bidentate ligands to get a more detailed understanding of how changes to ancillary ligands affect the hydroamination of alkynes catalyzed by titanium. To model the electronic donor ability, the ligand donor parameter (LDP) was used, and to model the steric effects, percent buried volume (% Vbur) was employed. For the modeling study, 7 previously unpublished unsymmetrical Ti(XX')(NMe2)2 precatalysts were prepared, where XX' is a chelating ligand with pyrrolyl/indolyl linkages. The rates of these unsymmetrical and 10 previously reported symmetrical precatalysts were used with the model kobs = a + b(LDP)1 + c(LDP)2 + d(% Vbur)1 + e(% Vbur)2, where a-e were found through least-squares refinement. The model suggests that (1) the two attachment points of the bidentate ligand XX' are in different environments on the metal (e.g., axial and equatorial in a trigonal bipyramidal or square pyramidal structure), (2) the position of the unsymmetrical ligand on the metal is determined by the electronics of the ligand rather than the sterics, and (3) that one side of the chelating ligand's electronics strongly influences the rate, while the other side's sterics more strongly influences the rate. From these studies, we were able to generate catalysts fitting to this model with rate constants larger than the fastest symmetrical catalyst tested.

Exploiting Multimetallic Cooperativity in the Ring-Opening Polymerization of Cyclic Esters and Ethers

The use of multimetallic complexes is a rapidly advancing route to enhance catalyst performance in the ring-opening polymerization of cyclic esters and ethers. Multimetallic catalysts often outperform their monometallic analogues in terms of reactivity and/or polymerization control, and these improvements are typically attributed to "multimetallic cooperativity". Yet the origins of multimetallic cooperativity often remain unclear. This review explores the key factors underpinning multimetallic cooperativity, including metal-metal distances, the flexibility, electronics and conformation of the ligand framework, and the coordination environment of the metal centers. Emerging trends are discussed to provide insights into why cooperativity occurs and how to harness cooperativity for the development of highly efficient multimetallic catalysts.

Coplanar binuclear group 4 post-metallocene complexes supported by chelating μ-(σ2-aryl) ligands: characterisation and olefin polymerisation catalysis

The report concerns expansion of the previously developed M-[O,N,C] [pyridine-2-phenolate-6-(σ-aryl)] catalyst system into rigid, coplanar bimetallic assemblies, which afford metal-metal distances that are predetermined yet amenable for cooperativity, as well as locked-in "syn" orientation of binding sites that offer the same direction of access for substrates. The binuclear complexes are generated in a regioselective manner to yield para hydrogen atoms (not ortho) at the central μ-aryl moiety, and have been characterised by multinuclear NMR spectroscopy. The "anti" (showing opposite directions of access) and mononuclear analogues have also been prepared for comparison purposes. Six syn-type bimetallic derivatives of Ti, Zr and Hf have been characterised by X-ray crystallography, to reveal metal-metal separations of 6.3-6.7 Å. For ethylene and ethylene/1-octene polymerisation reactions in conjunction with trityl borate, the syn-Ti2 catalysts display superior efficiencies and produced polymers with higher Mw values than for the anti and mono-Ti congeners, thus indicating the possibility of favourable enchainment interactions and cooperative reactivity.

The Effect of Carborane Substituents on the Lewis Acidity of Boranes

The Lewis acidity of primary, secondary, and tertiary boranes with phenyl, pentafluorophenyl, and all three isomers of the C-substituted icosahedral carboranes (ortho, meta, and para) was investigated by computing their fluoride, hydride, and ammonia affinities as well as their global electrophilicity indices and LUMO energies. From these calculations, it was determined that the substituent effects on the Lewis acidity of these boranes follow the trend of ortho-carborane > meta-carborane > para-carborane > C6F5 > C6H5.

MAO- and Borate-Free Activating Supports for Group 4 Metallocene and Post-Metallocene Catalysts of α-Olefin Polymerization and Oligomerization

Modern industry of advanced polyolefins extensively uses Group 4 metallocene and post-metallocene catalysts. High-throughput polyolefin technologies demand the use of heterogeneous catalysts with a given particle size and morphology, high thermal stability, and controlled productivity. Conventional Group 4 metal single-site heterogeneous catalysts require the use of high-cost methylalumoxane (MAO) or perfluoroaryl borate activators. However, a number of inorganic phases, containing highly acidic Lewis and Brønsted sites, are able to activate Group 4 metal pre-catalysts using low-cost and affordable alkylaluminums. In the present review, we gathered comprehensive information on MAO- and borate-free activating supports of different types and discussed the surface nature and chemistry of these phases, examples of their use in the polymerization of ethylene and α-olefins, and prospects of the further development for applications in the polyolefin industry.

Dinuclear Group 4 Metal Complexes Bearing Anthracene-Bridged Bifunctional Amido-Ether Ligands: Remarkable Metal Effect and Cooperativity toward Ethylene/1-Octene Copolymerization

Two types of bifunctional amido-ether ligands (syn-L and anti-L) with the rigid anthracene skeleton were designed to support dinuclear group 4 metal complexes. All organic ligands and organometallic complexes (syn-M₂ and anti-M₂; M = Hf, Zr, and Ti) were fully characterized by ¹H and ¹³C NMR spectroscopies and elemental analyses. The anti-Hf₂ complex showed two confirmations at room temperature with C₂-symmetry or S₂-symmetry that can inter-exchange, as indicated by VT NMR, while only a C₂-symmetric isomer was observed for syn-Hf₂ complex at room temperature. However, for Zr and Ti analogues, both syn and anti complexes exhibited only one conformation at room temperature. The molecular structures of complexes syn-Hf₂, anti-Hf₂, and syn-Ti₂ in the solid state were further determined by single-crystal X-ray diffraction, revealing the distances between two metal centers in syn-M₂ from 7.138 Å (syn-Ti₂) to 7.321 Å (syn-Hf₂) but a much farther separation in anti-M₂ (8.807 Å in C₂-symmetric anti-Hf₂). The mononuclear complex (2-CH₃O-C₆H₄-N-C₁₄H₉)Zr(NMe₂)₃ (mono-Zr₁) was also prepared for control experiments. In the presence of alkyl aluminum (AlEt₃) as the alkylating agent and trityl borate ([Ph₃C][B(C₆F₅)₄]) as the co-catalyst, all metal complexes were tested for copolymerization of ethylene with 1-octene at high temperature (130 °C). The preliminary polymerization results revealed that the activity was highly dependent upon the nature of metal centers, and syn-Zr₂ showed the highest activity of 9600 kg(PE)·mol^-1 (Zr)·h^-1, which was about 17- and 2.2-fold higher than those of syn-Hf₂ and syn-Ti₂, respectively. Benefitting from both steric proximity and electronical interaction of two metal centers, syn-Zr₂ exhibited significant cooperativity in comparison to anti-Zr₂ and mono-Zr₁, with regard to activity and molecular weight and 1-octene incorporation of resultant copolymers.

Cooperative Initiation in a Dinuclear Indium Complex for CO2 Epoxide Copolymerization

Dinuclear indium complexes have been synthesized and characterized. These include neutral and cationic indium complexes supported by a Schiff base ligand bearing a binaphthol linker. The new compounds were investigated for alternating copolymerization of CO₂ and cyclohexene oxide. In particular, the neutral indium chloride complex (±)-[(O_NapN_iN)InCl₂]₂ (4) showed high conversion of cyclohexene oxide and selectivity for poly(cyclohexene carbonate) formation without cocatalysts at 80 °C under various CO₂ pressures (2-30 bar). Importantly, the reactivity of the dinuclear indium chloride complex 4 is drastically different from that of the mononuclear indium chloride complex (±)-(NN_iO_tBu)InCl₂ (5), suggesting a cooperative initiation mechanism involving the two indium centers in 4.

Access to Disentangled Ultrahigh Molecular Weight Polyethylene via a Binuclear Synergic Effect

Disentangled ultrahigh molecular weight polyethylene (dis-UHMWPE) has excellent processability but can be achieved under extreme conditions. Herein, we report ethylene polymerization with the binuclear half-sandwich scandium complexes C1-Sc₂ and C2-Sc₂ to afford UHMWPE. C1-Sc₂ bearing a short linker shows higher activity and gives higher molecular weight PEs than C2-Sc₂ containing a flexible spacer and the mononuclear Sc₁ . Strikingly, all UHMWPEs isolated from C1-Sc₂ under broad temperature range (25-120 °C) and wide ethylene pressures (2-13 bar) feature very low degree of entanglement as proved by rheological test, DSC annealing study and SEM. These dis-UHMWPEs are facilely mediated solid-state-process at 130 °C and their tensile strength and modulus reach up to 149.2 MPa and 1.5 GPa, respectively. DFT simulations reveal that the formation of dis-UHMWPE is attributed to the binuclear synergic effect and the agostic interaction between the active center and the growing chain.

Ethylene polymerization using heterogeneous multinuclear nickel catalysts supported by a crosslinked alpha diimine ligand network

A crosslinked alpha diimine ligand supporting a nickel metal center polymerizes ethylene to produce polyethylene with controlled microstructures, high activities, and can be removed from the product.

Structural evolution of iminopyridine support for nickel/palladium catalysts in ethylene (oligo)polymerization

The interest in the late transition metal catalyst based design of new architectures of polyethylene (PE) has continuously been increasing over the last few years. The structure of these catalysts is predominantly important in controlling the morphological and architectural properties of the resulting polyethylene. Particularly, iminopyridine is a versatile bidentate support for Ni and Pd catalysts in ethylene (oligo)polymerization providing a wide variety of products ranging from volatile oligomers to ultra-high molecular weight polyethylene. Extensive structural modifications have been induced in the iminopyridine ligand through steric and electronic substitution, tuning the catalyst behavior in terms of activity and properties of the resulting polymer. Carbocyclic-fused iminopyridine and N-oxide iminopyridine are the new state of the art iminopyridine ligand designs. In this review, we aim to summarize all the developments in mononuclear iminopyridine-nickel and -palladium catalysts for ethylene (oligo)polymerization since the first report published in 1999 to present, focusing on the correlation among the pre-catalyst, co-catalyst type, thermal stability and polymer/oligomer structure. For comparison, the structural variations in the binuclear iminopyridine-nickel catalysts are also described. The detailed comparison of the structural variations in these catalysts with respect to their polymerization performance will give deep understanding in the development of new efficient catalyst designs.

Zirconium-Based Catalysts in Organic Synthesis

Zirconium is a silvery-white malleable and ductile metal at room temperature with a crustal abundance of 162 ppm. Its compounds, showing Lewis acidic behavior and high catalytic performance, have been recognized as a relatively cheap, low-toxicity, stable, green, and efficient catalysts for various important organic transformations. Commercially available inorganic zirconium chloride was widely applied as a catalyst to accelerate amination, Michael addition, and oxidation reactions. Well-designed zirconocene perfluorosulfonates can be applied in allylation, acylation, esterification, etc. N-Chelating oganozirconium complexes accelerate polymerization, hydroaminoalkylation, and CO₂ fixation efficiently. In this review, the applications of both commercially available and synthesized zirconium catalysts in organic reactions in the last 5 years are highlighted. Firstly, the properties and application of zirconium and its compounds are simply introduced. After presenting the superiority of zirconium compounds, their applications as catalysts to accelerate organic transformations are classified and presented in detail. On the basis of different kinds of zirconium catalysts, organic reactions accelerated by inorganic zirconium catalysts, zirconium catalysts bearing Cp, and organozirconium catalysts without Cp are summarized, and the plausible reaction mechanisms are presented if available.

Effect of Borate Cocatalysts toward Activity and Comonomer Incorporation in Ethylene Copolymerization by Half-Titanocene Catalysts in Methylcyclohexane

Ethylene copolymerizations with 2-methyl-1-pentene, 1-dodecene (DD), vinylcyclohexane (VCH), [Me₂Si(C₅Me₄)(N ^t Bu)]TiCl₂ (1), Cp*TiMe₂(O-2,6- ⁱ Pr₂-4-RC₆H₂) [R = H (2), SiEt₃ (3)]-borate, and [A(H)]⁺[BAr₄]^- [Ar = C₆F₅; A(H)⁺ = N⁺(H)Me(n-C₁₈H₃₇)₂, N⁺(H)(CH₂CF₃)(n-C₁₈H₃₇)₂, HO⁺(n-C₁₄H₂₉)₂·O(n-C₁₄H₂₉)₂, HO⁺(n-C₁₆H₃₃)₂·O(n-C₁₆H₃₃)₂; Ar = C₁₀F₇, A(H)⁺ = HO⁺(n-C₁₄H₂₉)₂·O(n-C₁₄H₂₉)₂ (B5), N⁺(H)(CH₂CF₃)(n-C₁₈H₃₇)₂] catalyst systems conducted in methylcyclohexane (MCH) exhibited better comonomer incorporation than those conducted in toluene (in the presence of methylaluminoxane (MAO) or borate cocatalysts). The activity was affected by the borate cocatalyst and 1,3-B5 catalyst systems in MCH and showed the highest activity in the ethylene copolymerizations with VCH and DD.

Growth Kinetics of Single Polymer Particles in Solution via Active-Feedback 3D Tracking

The ability to directly observe chemical reactions at the single-molecule and single-particle level has enabled the discovery of behaviors otherwise obscured by ensemble averaging in bulk measurements. However powerful, a common restriction of these studies to date has been the absolute requirement to surface tether or otherwise immobilize the chemical reagent/reaction of interest. This constraint arose from a fundamental limitation of conventional microscopy techniques, which could not track molecules or particles rapidly diffusing in three dimensions, as occurs in solution. However, many chemical processes occur entirely in the solution phase, leaving single-particle/-molecule analysis of this critical area of science beyond the scope of available technology. Here, we report the first kinetics studies of freely diffusing and actively growing single polymer-particles at the single-particle level freely diffusing in solution. Active-feedback single-particle tracking was used to capture three-dimensional (3D) trajectories and real-time volumetric images of freely diffusing polymer particles (D ≈ 10^-12 m²/s) and extract the growth rates of individual particles in the solution phase. The observed growth rates show that the average growth rate is a poor representation of the true underlying variability in polymer-particle growth behavior. These data revealed statistically significant populations of faster- and slower-growing particles at different depths in the sample, showing emergent heterogeneity while particles are still freely diffusing in solution. These results go against the prevailing premise that chemical processes in freely diffusing solution will exhibit uniform kinetics. We anticipate that these studies will launch new directions of solution-phase, nonensemble-averaged measurements of chemical processes.

Mixed-metal calix[8]arene complexes: structure, and ring opening polymerisation studies

Reactions of différent combinations of group V alkoxides or tungsten oxyalkoxide salts with p-tert-butylcalix[8]areneH₈ (L⁸H₈) affords mixed-metal calix[8]arene systems. Intruiging molecular structures are formed and the systems are capable of the ring opening polymerisation of ε-caprolactone under N₂, air, or as melts affording mostly low molecular weight products.

Sidechain Metallopolymers with Precisely Controlled Structures: Synthesis and Application in Catalysis

Inspired by the cooperative multi-metallic activation in metalloenzyme catalysis, artificial enzymes as multi-metallic catalysts have been developed for improved kinetics and higher selectivity. Previous models about multi-metallic catalysts, such as cross-linked polymer-supported catalysts, failed to precisely control the number and location of their active sites, leading to low activity and selectivity. In recent years, metallopolymers with metals in the sidechain, also named as sidechain metallopolymers (SMPs), have attracted much attention because of their combination of the catalytic, magnetic, and electronic properties of metals with desirable mechanical and processing properties of polymeric backbones. Living and controlled polymerization techniques provide access to SMPs with precisely controlled structures, for example, controlled degree of polymerization (DP) and molecular weight dispersity (Đ), which may have excellent performance as multi-metallic catalysts in a variety of catalytic reactions. This review will cover the recent advances about SMPs, especially on their synthesis and application in catalysis. These tailor-made SMPs with metallic catalytic centers can precisely control the number and location of their active sites, exhibiting high catalytic efficiency.

Nickel(II)-catalyzed living polymerization of diazoacetates toward polycarbene homopolymer and polythiophene-block-polycarbene copolymers

Diazoacetate polymerization has attracted considerable research attention because it is an effective approach for fabricating carbon–carbon (C–C) main chain polymers. However, diazoacetate polymerization based on inexpensive catalysts has been a long-standing challenge. Herein, we report a Ni(II) catalyst that can promote the living polymerization of various diazoacetates, yielding well-defined C–C main chain polymers, polycarbenes, with a predictable molecular weight (M_n) and low dispersity (M_w/M_n). Moreover, the Ni(II)-catalyzed sequential living polymerization of thiophene and diazoacetate monomers affords interesting π-conjugated poly(3-hexylthiophene)-block-polycarbene copolymers in high yields with a controlled M_n, variable compositions, and low M_w/M_n, although the structure and polymerization mechanism of the two monomers differ. Using this strategy, amphiphilic block copolymers comprising hydrophobic poly(3-hexylthiophene) and hydrophilic polycarbene blocks are facilely prepared, which were self-assembled into well-defined supramolecular architectures with tunable photoluminescence.

Diazoacetate polymerizations using inexpensive catalysts has been a long-standing challenge to achieve. Here the authors report a Ni(II) catalyst that can promote living polymerization of various diazoacetates, yielding well-defined carbon–carbon main chain polymers, polycarbenes.

Solution XAS Analysis for Reactions of Phenoxide-Modified (Arylimido)vanadium(V) Dichloride and (Oxo)vanadium(V) Complexes with Al Alkyls: Effect of Al Cocatalyst in Ethylene (Co)polymerization

V K-edge XANES (XANES = X-ray Absorption Near Edge Structure) spectra of the reaction solution of V(NAr)Cl2(OAr) (1, Ar = 2,6-Me2C6H3) with halogenated Al alkyls (Me2AlCl, Et2AlCl, EtAlCl2, 50 equiv) in toluene showed low energy shifts (2.6–3.6 eV on the basis of inflection point in the photon energy) in the edge absorption accompanying slight shift to low photon energy in the pre-edge peak (λmax values); a similar spectrum was observed when the reaction of 1 with Me2AlCl was conducted in n-hexane. These results strongly suggest a formation of similar vanadium(III) species irrespective of kind of Al alkyls and solvent (toluene or n-hexane). Significant low-energy shifts in the edge absorption accompanied with diminishing the strong pre-edge absorption were also observed when VOCl3 or VO(OiPr)3 was treated with Me2AlCl (10 equiv) in toluene, clearly indicating a formation of low oxidation state vanadium species accompanied with certain structural changes (from tetrahedral to octahedral) in solution.

Chromium Complexes Supported by NNO-Tridentate Ligands: An Unprecedent Activity with the Low Requirement of MAO

The development of metal catalysts with high activity and thermal stability but low requirement of MAO as cocatalyst is highly desired for polyolefin industrial application. In this contribution, a series...

Commercially available palladium salts as practical and green single-component catalysts in the coordination polymerization of 1-chloro-2-phenylacetylenes in air

Commercially available Pd salts serve as single-component catalysts for coordination polymerization of 1-chloro-2-phenylacetylenes, which affords a new design concept of metal catalysts for coordination polymerization of disubstituted alkynes.

Design and synthesis of binuclear vanadium catalysts for copolymerization of ethylene and polar monomers

Binuclear vanadium complexes exhibited higher activity than monometallic complexes in ethylene polymerization and afforded UHMWPE. The binuclear catalysts also showed moderate activity in copolymerization with 10-undecen-1-ol and methyl 10-undecenoate.

Polyoxometalate-based CuII/CoII complexes tuned using various metal–pyrazole loops: design, diverse architectures and catalytic activity toward the oxidation of thioether derivatives

Three new polyoxometalate-based complexes with unique metal–pyrazole loops were synthesized, showing various architectures and finally resulting in different catalysis performance.