Ionic liquids-based extraction: a promising strategy for the advanced nuclear fuel cycle

Extractive Mass Transfer of Zr(IV) into a Hydrophobic Ionic Liquid Medium Containing Diglycolamide Extractant: Solvent Extraction and Spectroscopic Analysis

Solvent extraction of Zr(IV) in ionic liquid (IL) medium is less known and Zr(IV) - IL chemistry indeed needs exploration to realize the coordination approach of Zr(IV) in IL phase. In view of this, in the present work, a strongly hydrophobic imidazolium based IL: 1-methyl-3-octylimidazolium bis(trifluoromethylsulfonyl)imide ([C8mim][NTf2]) as the medium containing a diglycolamide (DGA) extractant: N,N,N',N'-tetra-n-octyldiglycolamide (TODGA) was opted to understand the extraction behavior of Zr(IV) from nitric acid medium. Different experimental parameters such as the concentration of initial nitric acid, initial feed metal concentration, equilibration time and ligand concentration were tuned to unravel the extraction efficiency of the proposed IL phase towards Zr(IV). The extraction scenario was completely dependent on the hydrophobicity of IL diluent and increasing extraction trend with an increase in feed acidity along with the coordination of two TODGA molecules ensured Zr(IV) - complex formation in a neutral solvation mechanistic pathway. The extraction trend of Zr(IV) was compared with molecular diluent (n-dodecane (n-DD)) containing TODGA and a phase modifier: N,N-dihexyloctanamide (DHOA). The coordination aspect of Zr(IV) with ligand in IL phase was ascertained spectroscopically to validate Zr(IV) loading in IL phase. Thermodynamics of Zr(IV) extraction revealed the nature of the extraction process and the complex formation.

Extraction and Selective Separation of ZrIV from LnIII/AnIII Using an Undiluted Phosphonium Ionic Liquid

Solvent extraction of Zr(IV) in an undiluted phosphonium based ionic liquid (IL) and its selective separation from Ln(III) and An(III) has been investigated in the present study. Eu(III)/Am(III) were chosen as the representative Ln(III)/An(III). Tri(hexyl)tetradecylphosphonium nitrate ([P66614][NO3]) was chosen as IL phase and the feed phase was nitric acid containing the target metal ions. The extraction process was accomplished at different experimental parameters such as the concentration of initial nitric acid, initial feed metal concentration and equilibration time to explore the extractability of the proposed IL towards Zr(IV). The efficient extraction of Zr(IV) without any external ligand in IL phase and negligible extraction of Eu(III)/Am(III) were distinctly discerned leading to noteworthy separation factors for Zr(IV). The loading experiment revealed a noticeable growth of equilibrium concentrations of Zr(IV) in IL phase while that of Eu(III) was very less irrespective of the initial feed concentration. The association of two IL moieties in the complex formation process has been inferred. Nitrate ion was found to be superior as IL anion in terms of metal loading in comparison to other anions. Thermodynamics of extraction and the stripping of the loaded Zr(IV) from IL phase using a suitable stripping solution have also been investigated.

Probing the heterogeneity of molecular level organization of ionic liquids: a comparative study using neutral Nile red and cationic Nile blue sulfate as fluorescent probes for butyrolactam-based protic ionic liquids

Ionic liquids (ILs) are liquid salts composed of cations and anions, known for their significant local heterogeneity at the molecular level. To understand the microheterogeneity with regard to their local polarity and local viscosity, we have used two structurally similar but chemically distinguishable fluorescent probes: Nile red (NR), a neutral molecule, and Nile blue sulfate (NBS), a charged molecule. A comparative study of the response of the two probes to the molecular level heterogeneity of ILs is expected to provide a better clarity of understanding regarding the charged polar domain and the uncharged hydrophobic domain of ILs. Towards this, we synthesized two butyrolactam-based protic ionic liquids (PILs), i.e., BTF and BTD, with the same ionic headgroup ([BT]+) and different alkyl tails ([RCOO]-), where {R = H, C11H23}. BTF has no significant hydrophobic domain, whereas BTD has a larger hydrophobic domain. Temperature-dependent fluorescence parameters such as fluorescence intensity, lifetime, and anisotropy were measured for both NR and NBS molecules. The use of a pair of structurally similar but ionically different probes enables differential estimation of parameters like the microviscosity of a domain using the fluorescence anisotropy parameter (r). The absorption and emission spectra of both probe molecules are observed to be blue shifted upon going from BTF to BTD. NR showed a significant blue shift in absorption and emission band maxima. Conversely, NBS exhibited a small wavelength shift, possibly influenced by the preferred location of their charged head group domain. Temperature-dependent rotational relaxation time (θ) of NR in BTD is smaller than that of NBS by 60-70%, indicating that stronger charge-charge interactions exist between the polar domain of BTD and NBS. Moreover, it is observed that the local viscosity of the BTF IL around both probes is similar, whereas there is a considerable difference for the BTD IL. These results are an indication that NBS being charged prefers to locate itself in the charged head group region of the IL, whereas NR being neutral tends to reside both in the hydrophobic domain and in the head group but is predominantly located in the hydrophobic domain.

Spontaneous Multi-scale Supramolecular Assembly Driven by Noncovalent Interactions Coupled with the Continuous Marangoni Effect

Reported herein is the multi-scale supramolecular assembly (MSSA) process along with redox reactions driven by supramolecular interactions coupled with the spontaneous Marangoni effect in ionic liquid (IL)-based extraction systems. The black powder, the single sphere with a black exterior, and the single colorless sphere were formed step by step at the interface when an aqueous solution of KMnO4 was mixed with the IL phase 1-(2-hydroxyethyl)-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (C2OHmimNTf2) bearing octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO). The mechanism of the whole process was studied systematically. The phenomena were related closely to the change in the valence state of Mn. The MnO4- ion could be reduced quickly to δ-MnO2 and further to Mn2+ slowly by the hydroxyl-functionalized IL C2OHmimNTf2. Based on Mn2+, Mn(CMPO)32+, elementary building blocks (EBBs), and [EBB]n clusters were generated step by step. The [EBB]n clusters with the large enough size that were transferred to the interface, together with the remaining δ-MnO2, assembled into the single sphere with a black exterior, driven by supramolecular interactions coupled with the spontaneous Marangoni effect. When the remaining δ-MnO2 was used up, the mixed single sphere turned completely colorless. It was found that the reaction site of C2OHmim+ with Mn(VII) and Mn(IV) was distributed mainly at the side chain with a hydroxyl group. The MSSA process presents unique spontaneous phase changes. This work paves the way for the practical application of the MSSA-based separation method developed recently. The process also provides a convenient way to observe in situ and characterize directly the continuous Marangoni effect.

Efficient actinide sequestration with ionic liquid-based extraction chromatography resins containing Aza-crown ether functionalized diglycolamides

Two new extraction chromatographic resins (ECRs) were prepared by impregnating two exotic diglycolamide (DGA) ligands (having three or four DGA moieties tethered to aza-crown ether scaffolds) dissolved in an ionic liquid onto an inert solid support. A room temperature ionic liquid (RTIL) was used for enhancing the performance of the ECRs. The ECR containing triaza-9-crown-3 functionalized with three DGA moieties (TAM-3-DGA), and tetraaza-12-crown-4 tethered with four DGA arms (TAM-4-DGA) were evaluated for the separation of Am3+ and Pu4+from nitric acid solutions. The resin capacity for Eu3+ was 9.52 mg/g and 7.24 mg/g for TAM-3-DGA and TAM-4-DGA resins, respectively. Similarly, the resin capacity for Pu4+was 7.44 mg/g and 5.72 mg/g for TAM-3-DGA and TAM-4-DGA resins, respectively. These maximum loading values corresponded to the formation of a 1:1 metal/ligand complex for the Eu3+ ion and a 1:2 metal/ligand complex for the Pu4+ ion. The sorption of Eu3+and Pu4+on the resins followed a chemisorption phenomenon on both resins. The sorbed Eu3+and Pu4+ions from the resin phase could be efficiently desorbed with complexing ligands such as guanidine carbonate/HEDTA and oxalic acid, respectively.

Acceleration of Solvation Free Energy Calculation via Thermodynamic Integration Coupled with Gaussian Process Regression and Improved Gelman-Rubin Convergence Diagnostics

The determination of the solvation free energy of ions and molecules holds profound importance across a spectrum of applications spanning chemistry, biology, energy storage, and the environment. Molecular dynamics simulations are powerful tools for computing this critical parameter. Nevertheless, the accurate and efficient calculation of the solvation free energy becomes a formidable endeavor when dealing with complex systems characterized by potent Coulombic interactions and sluggish ion dynamics and, consequently, slow transition across various metastable states. In the present study, we expose limitations stemming from the conventional calculation of the statistical inefficiency g in the thermodynamic integration method, a factor that can hinder the determination of convergence of the solvation free energy and its associated uncertainty. Instead, we propose a robust scheme based on Gelman-Rubin convergence diagnostics. We leverage this improved estimation of uncertainties to introduce an innovative accelerated thermodynamic integration method based on the Gaussian Process regression. This methodology is applied to the calculation of the solvation free energy of trivalent rare-earth elements immersed in ionic liquids, a scenario in which the aforementioned challenges render standard approaches ineffective. The proposed method proves to be effective in computing solvation free energy in situations where traditional thermodynamic integration methods fall short.

Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

Perplexing EPR Signals from 5f36d1 U(II) Complexes

Metal complexes with unpaired electrons in orbitals of different angular momentum quantum numbers (e.g., f and d orbitals) are unusual and opportunities to study the interactions among these electrons are rare. X-band electron paramagnetic resonance (EPR) data were collected at <10 and 77 K on 10 U(II) complexes with 5f36d1 electron configurations and on some analogous Ce(II), Pr(II), and Nd(II) complexes with 4fn5d1 electron configurations. The U(II) compounds unexpectedly display similar two-line axial signals with g|| = 2.04 and g⊥ = 2.00 at 77 K. In contrast, U(II) complexes with 5f4 configurations are EPR-silent. Unlike U(II), the congenic 4f35d1 Nd(II) complex is EPR-silent. The Ce(II) complex with a 4f15d1 configuration is also EPR-silent, but a signal is observed for the Pr(II) complex, which has a 4f25d1 configuration. Whether or not an EPR signal is expected for these complexes depends on the coupling between f and d electrons. Since the coupling in U(II) systems is expected to be sufficiently strong to preclude an EPR signal from compounds with a 5f36d1 configuration, the results are viewed as unexplained phenomena. However, they do show that 5f36d1 U(II) samples can be differentiated from 5f4 U(II) complexes by EPR spectroscopy.

Ionic Liquid as a N,O-Donor Ligand-Based Extraction System Modifier: Establishing the Mechanism of Am(III)-Selectivity Increasing

In this work, we studied the extraction systems for the separation f-elements based on the tetradentate N,O-donor ligand di(N-ethyl-4-ethylanilide) 2,2'-dipyridyl-6,6'-dicarboxylic acid (L). The organic phase of these systems was perspective fluorine-containing organic solvents-metanitrobenzotrifluoride (F-3), ionic liquid C4mimNTf2 (IL), and their mixture. The increase of Am(III) selectivity in the presence of Ln(III) in cases of the diluent mixture was shown. The mechanism of the f-element complexation leading to the improved properties of the extraction systems was studied by UV-visible, Raman-spectroscopy, XRD-study, and density functional theory calculations.

Solvent effects on extractant conformational energetics in liquid-liquid extraction: a simulation study of molecular solvents and ionic liquids

Extractant design in liquid-liquid extraction (LLE) is a research frontier of metal ion separations that typically focuses on the direct extractant-metal interactions. However, a more detailed understanding of energetic drivers of separations beyond primary metal coordination is often lacking, including the role of solvent in the extractant phase. In this work, we propose a new mechanism for enhancing metal-complexant energetics with nanostructured solvents. Using molecular dynamics simulations with umbrella sampling, we find that the organic solvent can reshape the energetics of the extractant's intramolecular conformational landscape. We calculate free energy profiles of different conformations of a representative bidentate extractant, n-octyl(phenyl)-N,N-diisobutyl carbamoyl methyl phosphinoxide (CMPO), in four different solvents: dodecane, tributyl phosphate (TBP), and dry and wet ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf2N]). By promoting reorganization of the extractant molecule into its binding conformation, our findings reveal how particular solvents can ameliorate this unfavorable step of the metal separation process. In particular, the charge alternating nanodomains formed in ILs substantially reduce the free energy penalty associated with extractant reorganization. Importantly, using alchemical free energy calculations, we find that this stabilization persists even when we explicitly include the extracted cation. These findings provide insight into the energetic drivers of metal ion separations and potentially suggest a new approach to designing effective separations using a molecular-level understanding of solvent effects.

The Potential Role of Ionic Liquid as a Multifunctional Dental Biomaterial

In craniofacial research and routine dental clinical procedures, multifunctional materials with antimicrobial properties are in constant demand. Ionic liquids (ILs) are one such multifunctional intelligent material. Over the last three decades, ILs have been explored for different biomedical applications due to their unique physical and chemical properties, high task specificity, and sustainability. Their stable physical and chemical characteristics and extremely low vapor pressure make them suitable for various applications. Their unique properties, such as density, viscosity, and hydrophilicity/hydrophobicity, may provide higher performance as a potential dental material. ILs have functionalities for optimizing dental implants, infiltrate materials, oral hygiene maintenance products, and restorative materials. They also serve as sensors for dental chairside usage to detect oral cancer, periodontal lesions, breath-based sobriety, and dental hard tissue defects. With further optimization, ILs might also make vital contributions to craniofacial regeneration, oral hygiene maintenance, oral disease prevention, and antimicrobial materials. This review explores the different advantages and properties of ILs as possible dental material.

Anticorrosive performance of newly synthesized dipyridine based ionic liquids by experimental and theoretical approaches

Two newly synthetic nontoxic dipyridine-based ionic liquids (PILs) with the same chain lengths and different polar groups were investigated: bispyridine-1-ium tetrafluoroborate (BPHP, TFPHP) with terminal polar groups Br and CF3, respectively, on Carbon steel (CS) in 8M H3PO4 as corrosion inhibitors. Their chemical structure was verified by performing 1HNMR and 13CNMR. Their corrosion inhibition was investigated by electrochemical tests, especially as mass transfer with several characterizations: Scanning electron microscope/Energy dispersive X-ray spectroscopy (SEM-EDX), UV-visible, Atomic force microscope, Atomic absorbance spectroscopy, X-ray Photoelectron Spectroscopy and Gloss value. Theoretical calculation using density functional theory by calculating several parameters, molecular electrostatic potential, Fukui Indices, and Local Dual Descriptors were performed to demonstrate the reactivity behavior and the reactive sites of two molecules with a concentration range (1.25-37.5 × 10-5 M) and temperature (293-318 K). The maximum inhibition efficiency (76.19%) and uniform coverage were sufficient for BPHP at an optimum concentration of 37.5 × 10-5 M with the lowest temperature of 293 K. TFPHP recorded 71.43% at the same conditions. Two PILs were adsorbed following the El-Awady adsorption isotherm, including physicochemical adsorption. The computational findings agree with Electrochemical measurements and thus confirm CS's corrosion protection in an aggressive environment.

Adsorptive Membranes Incorporating Ionic Liquids (ILs), Deep Eutectic Solvents (DESs) or Graphene Oxide (GO) for Metal Salts Extraction from Aqueous Feed

Water scarcity is a significant concern, particularly in arid regions, due to the rapid growth in population, industrialization, and climate change. Seawater desalination has emerged as a conventional and reliable solution for obtaining potable water. However, conventional membrane-based seawater desalination has drawbacks, such as high energy consumption resulting from a high-pressure requirement, as well as operational challenges like membrane fouling and high costs. To overcome these limitations, it is crucial to enhance the performance of membranes by increasing their efficiency, selectivity, and reducing energy consumption and footprint. Adsorptive membranes, which integrate adsorption and membrane technologies, offer a promising approach to address the drawbacks of standalone membranes. By incorporating specific materials into the membrane matrix, composite membranes have demonstrated improved permeability, selectivity, and reduced pressure requirements, all while maintaining effective pollutant rejection. Researchers have explored different adsorbents, including emerging materials such as ionic liquids (ILs), deep eutectic solvents (DESs), and graphene oxide (GO), for embedding into membranes and utilizing them in various applications. This paper aims to discuss the existing challenges in the desalination process and focus on how these materials can help overcome these challenges. It will also provide a comprehensive review of studies that have reported the successful incorporation of ILs, DESs, and GO into membranes to fabricate adsorptive membranes for desalination. Additionally, the paper will highlight both the current and anticipated challenges in this field, as well as present prospects, and provide recommendations for further advancements.

Structural Properties of HEHN- and HAN-Based Ionic Liquid Mixtures: A Polarizable Molecular Dynamics Study

Molecular dynamics simulations of binary mixtures comprising 2-hydroxyethylhydrazinium nitrate (HEHN) and hydroxylammonium nitrate (HAN) were conducted using the polarizable APPLE&P force field to investigate fundamental properties of multimode propulsion (MMP) propellants. Calculated densities as a function of temperature were in good agreement with experiments and similar simulations. The structural properties of neat HEHN and HAN-HEHN provided insights into their inherent, protic nature. Radial distribution functions (RDFs) identified key hydrogen bonding sites located at N-H···O and O-H···O within a first solvation shell of approximately 2 Å. Angular distribution functions further affirmed the relatively strong nature of the hydrogen bonds with nearly linear directionality. The increased hydroxylammonium cation (HA+) mole fraction shows the influence of competitively strong hydrogen bonds on the overall hydrogen bond network. Dominant spatial motifs via three-dimensional distribution functions along with nearly nanosecond-long hydrogen bond lifetimes highlight the local bonding environment that may precede proton transfer reactions.

Evaluation of a Phosphinate Functionalized Ionic Liquid for the Separation of Nb and Ta from Nitric Acid Feed Conditions

A 'green' single-step separation process, involving a phosphonium phosphinate functionalized ionic liquid (FIL) in C8mim·NTf2, has been developed for highly encouraging improvements in the mutual separation of Nb and Ta with a maximum separation factor of ∼48 at 2 M nitric acid. The separation factor in C4mim·NTf2 was found to be somewhat lower compared to that seen in C8mim·NTf2. In C8mim·NTf2, the extraction proceeded via the neutral NbOF3(R4P+)(R2POO-) and TaOF3(R4P+)(R2POO-) species predominated by a 'solvation' mechanism at 2 M HNO3, where both the cationic and anionic parts of the FIL took part in the metal ion extraction. However, in the case of C4mim·NTf2, the extraction proceeded via a cation exchange mechanism involving the mono-positive species viz. [NbO(R2POO-)2]+IL, [TaO(R2POO-)2]+IL. Only the phosphinate group of the FIL was directly involved in the binding to the metal ion. The charge neutrality was maintained by the exchange of the C4mim+ ion from the ionic liquid phase to the aqueous phase. The processes were spontaneous, exothermic involving outer sphere complexation. The radiolytic stabilities of the C8mim·NTf2-based solvent systems were poorer than those of the solvents based on C4mim·NTf2. Aqueous solutions of EDTA-guanidine carbonate or DTPA-guanidine carbonate showed promising back extraction ability though three contacts of these organic phases were required for more than 99.99% stripping of the metal ion. The reusability of these solvent systems was evaluated. After four consecutive cycles, a maximum of only 8% reduction in the extraction efficiency of Ta was noticed, while for Nb it was less than 4% for Nb.

Microstructures of Choline Amino Acid based Biocompatible Ionic Liquids

Bio-compatible ionic liquids (Bio-ILs) represent a class of solvents with peculiar properties and exhibit huge potential for their applications in different fields of chemistry. Ever since they were discovered, researchers have used bio-ILs in diverse fields such as biomass dissolution, CO2 sequestration, and biodegradation of pesticides. This review highlights the ongoing research studies focused on elucidating the microscopic structure of bio-ILs based on cholinium cation ([Ch]+ ) and amino acid ([AA]- ) anions using the state-of-the-arta b i n i t i o ${ab\hskip0.25eminitio}$ and classical molecular dynamics (MD) simulations. The microscopic structure associated with these green ILs guides their suitability for specific applications. ILs of this class differ in the side chain of the amino acid anions, and varying the side chain significantly affects the structure of these ILs and thus helps in tuning the efficiency of biomass dissolution. This review demonstrates the central role of the side chain on the morphology of choline amino acid ([Ch][AA]) bio-ILs. The seemingly matured field of bio-ILs and their employment in various applications still holds significant potential, and the insights on their microscopic structure would steer the field of target specific application of these green ILs.

Selective Complexation and Separation of Uranium(VI) from Thorium(IV) with New Tetradentate N,O-Hybrid Diamide Ligands: Synthesis, Extraction, Spectroscopy, and Crystallographic Studies

An unmet challenge in the thorium-uranium fuel cycle is the efficient separation of uranium from thorium. Herein, two new tetradentate N,O-hybrid ligands, N,N'-diethyl-N,N'-di-p-tolyl-2,2'-bipyridine-6,6'-dicarboxamide (Et-Tol-BPDA) and N,N'-diethyl-N,N'-di-p-tolyl-2,2'-bipyrimidine-4,4'-dicarboxamide (Et-Tol-BPymDA), comprising a bipyridine or bipyrimidine core and amide moieties were designed and synthesized for selectively complexing and separating U(VI) from Th(IV). The high U(VI)/Th(IV) extraction selectivity was achieved by Et-Tol-BPDA (SF_U/Th = 33 at 3 M HNO₃) and Et-Tol-BPymDA (SF_U/Th = 73 at 3 M HNO₃) in nitric acid solutions. The extraction process for U(VI) or Th(IV) with these two ligands primarily proceeded through the solvation mechanism, as evidenced by slope analyses. Thermodynamic studies for the extraction of U(VI) and Th(IV) revealed a spontaneous process. Results from UV-vis spectroscopic titration and slope analyses demonstrated that U(VI) and Th(IV) each form a 1:1 complex with the two ligands both in the monophasic organic solution and the biphasic extraction system. The stability constants of the 1:1 complexes of Et-Tol-BPDA or Et-Tol-BPymDA with U(VI) were found to be larger than those with Th(IV), which coincide well with the high U(VI)/Th(IV) extraction selectivity. The solid-state structures of Et-Tol-BPDA, Et-Tol-BPymDA, and 1:1 complexes of the two ligands with U(VI) or Th(IV) were analyzed by X-ray diffraction technique. The results from this work implicate the potential of bipyridine- and bipyrimidine-derived diamide ligands for uranium/thorium separation.

Up/Down Tuning of Poly(ionic liquid)s in Aqueous Two-Phase Systems

Thermally induced reversible up/down migration of poly(ionic liquid)s (PILs) in aqueous two-phase systems (ATPSs) was achieved for the first time in this study. Novel ATPSs were fabricated using azobenzene (Azo)- and benzyl (Bn)-modified PILs, and their upper and lower phases could be easily tuned using the grafting degree (GD) of the Azo and Bn groups. Bn-PIL with higher GD_Bn could go up into the upper phase and Azo-PIL come down to the lower phase when the temperature increased (>65 °C); this behavior was reversed at lower temperatures. Moreover, a reversible two-phase/single-phase transition was realized under UV irradiation. Experimental and simulation results revealed that the difference in the hydration capacity between Bn-PIL and Azo-PIL accounted for their unique phase-separation behavior. A versatile platform for fabricating ATPSs with tunable stimuli-responsive behavior can be realized based on our findings, which can broaden their applications in the fields of smart separation systems and functional material development.

Ligand Effect on Physicochemical Properties of Ionic Liquid

In the solvent extraction process, the importance of an extractant (or ligand) and a diluent is inferred from their respective physicochemical properties. We have brought together all the recent results reported on the mixture of different extractants dissolved in a well-known ionic liquid diluent: 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₄ mim][NTf₂ ]) in the form of a review and aimed to emphasize the role of ligand polarity and structure on the physicochemical properties of an ionic liquid (IL) diluent. Some of the most important properties such as dynamic viscosity (η), absolute density ( ρ ${{\rm{{\rm \rho} }}}$ ), energy of activation (E_a ), coefficient of thermal expansion (α), phase separation time (PST), refractive index (n), etc., have been discussed meticulously in the paper. The effect of ligand structure on the aggregation behaviour of IL phase and the physicochemical properties of gamma irradiated solvent phases containing different ligands and their solution with IL phase also have been deliberated in detail.

Simple, Fast, and Selective Dissolution of Eu2O3 in an Ionic Liquid as a Sustainable Paradigm for Lanthanide-Actinide Separations in Radioactive Waste Remediation

The liquid-liquid extraction (LLE) process for lanthanide-actinide separation from the nuclear fuel cycle has several drawbacks such as, the requirement of cooling for decay heat control, the handling of large volumes of toxic volatile organic compounds (VOCs), and secondary waste generation. Alternatively reprocessing without spent fuel cooling is done by pyroprocessing, which uses high-temperature corrosive molten salts and requires elevated temperature, and is an energy-intensive process. In recent years, some of the shortcomings of both LLE and pyroprocessing are overcome by the use of room temperature ionic liquids (RTILs) as the solvents. In the present work, an attempt was made to exploit the potential of the neoteric, less-corrosive, low-VOC RTILs toward direct dissolution-based separations at ambient conditions. The present paper involves the selective dissolution of Eu₂O₃ in an RTIL, i.e., C₄mim·NTf₂ containing 2-thenoyltrifluoroacetone (HTTA) within ca. 30 min at ambient conditions; while the dissolution of AmO₂ and UO₂ were found to be very poor, making this an attractive method for lanthanide-actinide separation, a key step in radioactive waste management, i.e., an actinide partitioning and transmutation strategy. The quantitative dissolution of Eu₂O₃ from simulated spent nuclear fuel with different Eu₂O₃ loading was also shown. Water plays a crucial role in deciding the kinetics of dissolution and amount of the dissolved oxide. The combination of X-ray absorption, fluorescence, and UV-vis spectroscopic studies suggested the formation of the dehydrated anionic complex Ln(TTA)₄^- to play pivotal role in the oxide dissolution process. The structure of the complex was analyzed by density functional theory and extended X-ray absorption fine structure. The mechanism of oxide dissolution was proposed and electrochemical studies were performed to understand the possible recovery option using electrodeposition of the dissolved Eu³⁺.

A comparative study on the uptake of lanthanides from acidic feeds using extraction chromatography resins containing N,N,N',N'-tetra-n-alkyl diglycolamides with varying alkyl chain lengths in an ionic liquid

A comparative study on the uptake of several rare earth element (REE) ions viz. La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III) and Dy(III) was carried out from nitric acid feeds using four extraction chromatography resins which contained the diglycolamide (DGA) ligands, N,N,N',N'-tetra-n-alkyldiglycolamide with n-pentyl (TPDGA), n-hexyl (THDGA), n-octyl (TODGA) and n-decyl (TDDGA) groups taken in a room temperature ionic liquid (C₄mim·NTf₂). The uptake of the lanthanides followed the trend: La(III) < Ce(III) < Pr(III) < Nd(III) < Sm(III) < Gd(III) < Dy(III), which is similar to their ionic potential values and the uptake trend of the resins was TPDGA > THDGA > TODGA > TDDGA. The uptake of the metal ions was very high (>10⁴ g/mL) for all the lanthanide ions and was found to increase with increasing nitric acid concentrations. Based on the encouraging batch data, column studies were carried out with all the four extraction chromatography resins with the lanthanide ions used in this work. The column studies were carried out with both individual lanthanide ions and their mixtures. While the loading studies were carried out with 80 mg/L solutions of the metal ions (with respect to each of those) in the mixture of REEs, the elution studies were carried out using a solution of 0.05 M EDTA in 1 M guanidine carbonate. For the column studies involving individual REEs, 550 mg/L solutions were used. The elution profiles appeared to be sharp as >95% elution of the metal ions was accomplished in only 3 mL of the eluent which amounted to only 1.6 bed volumes which is highly impressive. When the studies were carried out with the mixture of the lanthanide ions, the breakthrough of Dy(III) was last while that of La(III) was seen at much lower volumes which was dependent on the nature of the extractant in the resins.

Investigation of the role of hydrogen bonding in ionic liquid-like salts with both N- and S-soft donors

Ionic liquid or not: hydrogen bonds such as the relatively rare N–H⋯S hydrogen bond lead in ionic liquid forming ion combinations to higher melting temperatures and lower decomposition points.

Dynamic Wetting of Ionic Liquid Drops on Hydrophobic Microstructures

Ionic liquids (ILs)─salts in a liquid state─play a crucial role in various applications, such as green solvents for chemical synthesis and catalysis, lubricants, especially for micro- and nanoelectromechanical systems, and electrolytes in solar cells. These applications critically rely on unique or tunable bulk properties of ionic liquids, such as viscosity, density, and surface tension. Furthermore, their interactions with different solid surfaces of various roughness and structures may uphold other promising applications, such as combustion, cooling, and coating. However, only a few systematic studies of IL wetting and interactions with solid surfaces exist. Here, we experimentally and theoretically investigate the dynamic wetting and contact angles (CA) of water and three kinds of ionic liquid droplets on hydrophobic microstructures of surface roughness (r = 2.61) and packing fraction (ϕ = 0.47) formed by micropillars arranged in a periodic pattern. The results show that, except for water, higher-viscosity ionic liquids have greater advancing and receding contact angles with increasing contact line velocity. Water drops initially form a gas-trapping, CB wetting state, whereas all three ionic liquid drops are in a Wenzel wetting state, where liquids penetrate and completely wet the microstructures. We find that an existing model comparing the global surface energies between a CB and a Wenzel state agrees well with the observed wetting states. In addition, a molecular dynamic model well predicts the experimental data and is used to explain the observed dynamic wetting for the ILs and superhydrophobic substrate. Our results further show that energy dissipation occurs more significantly in the three-phase contact line region than in the liquid bulk.

Insights into the spontaneous multi-scale supramolecular assembly in an ionic liquid-based extraction system

Herein, we report a four-step mechanism for the spontaneous multi-scale supramolecular assembly (MSSA) process in a two-phase system concerning an ionic liquid (IL). The complex ions, elementary building blocks (EBBs), [EBB]_n clusters and macroscopic assembly (MA) sphere are formed step by step. The porous large-sized [EBB]_n clusters in the glassy state can hardly stay in the IL phase and they transfer to the IL-water interface due to both electroneutrality and amphiphilicity. Then, the clusters undergo random collision in the interface driven by the Marangoni effect and capillary force thereafter. Finally, a single MA sphere can be formed owing to supramolecular interactions. To our knowledge, this is the first example realizing spontaneous whole-process supramolecular assembly covering microscopic, mesoscopic and macroscopic scales in extraction systems. The concept of multi-scale selectivity (MSS) is therefore suggested and its mechanism is revealed. The selective separation and solidification of metal ions can be realized in a MSSA-based extraction system depending on MSS. In addition, insights into the physicochemical characteristics of ILs from microscopic, mesoscopic to macroscopic scales are provided, and especially, the solvation effect of ILs on the large-sized clusters leading to the phase-splitting is examined. It is quite important that the polarization of uranyl in its complex, the growing of uranyl clusters in an IL as well as the glassy material of uranyl are investigated systematically on the basis of both experiment and theoretical calculations in this work.

Stability of composite polymeric beads containing a calix[4]arene-mono-crown-6 ligand for radio-cesium separation

Bis-octyloxy-calix[4]arene-mono-crown-6 (BOCMC) is a selective ligand for Cs(I) cation, and has been used in solvent extraction method for its separation from acidic feed. Looking at the various advantages and ease of extraction chromatography separation method, an attempt was made to prepare stable composite beads containing BOCMC entrapped in a suitable polymeric matrix. Therefore, an attempt was made to prepare a series of composite polymeric beads containing BOCMC in polysulfone (PS), polyether sulfone (PES) and sodium alginate polymeric matrix. Preparations of the beads were attempted by dissolving the solid BOCMC in the polymer solution, and also by using the ligand solution in isodecanol/dodecane and ionic liquids and then mixing in the polymeric solution. Every attempt failed to get the desired quality of beads in PES and sodium alginate matrix. However, very good quality and stable beads were obtained when 25 mM ligand solution dissolved in C₈mim.Tf₂N ionic liquid was used in PS matrix. Detail study for the extraction chromatography separation of Cs(I) was studied with BOCMC/C₈mim.Tf₂N/PS composite beads. Detail investigations on the preparation, characterization, reusability and radiation stability of these beads have been studied and reported in details.

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

Mechanistic Approach to Reveal Interaction of Uranyl Ions in Alkyltriphenylphosphonium Bromide-Based Deep Eutectic Solvent

Speciation is known to control fundamental aspects of metal processing and electrochemical behavior such as solubility and redox potentials. Deep eutectic solvents (DESs) are an emerging class of green, low-cost and designer solvents and are being explored as alternatives for recycling nuclear fuel and critical materials. However, there is a lack of knowledge about the behavior of metals in them. Here, for the first time, we synthesized three new DESs based on alkyltriphenylphosphonium bromide (C_nPPh3Br), with varied alkyl chain lengths (n), as the hydrogen-bond acceptor along with decanoic acid (DA) as the hydrogen-bond donor and explored the redox speciation of uranyl nitrate. The changes in the Fourier transform infrared and NMR spectra helped elucidate the formation of hydrogen bonds in DES. The absorption maxima of uranyl in DES was red-shifted by 10 nm compared to the free uranyl, with concomitant increase in intensity and luminescence lifetime, which suggested a strong interaction of uranyl nitrate with DES. Cyclic voltammetry was probed to understand the redox thermodynamics, transport properties, and heterogeneous electron transfer kinetics of the irreversible electron transfer of uranyl ions in the three DESs. Electrochemical and spectroscopic techniques together with density functional theory calculations unlocked microscopic insights into the solvation and speciation of UO₂²⁺ ions in three DESs and also the associated unusual trends observed in the physical properties of the DESs. The hydrogen-bonded structure of DES plays a crucial role in the redox behavior of the UO₂²⁺ ion due to its strong potent complexation with its components. The basic findings of the present work can have far-reaching consequences for the extraction, electrochemical separation, and future development of redox-based separation processes in the nuclear fuel cycle.

Unravelling the origin of long-term stability for Cs+ and Sr2+ solidification inside sodalite

Cesium (Cs⁺) and strontium (Sr²⁺) ions are the main fission byproducts in the reprocessing of spent nuclear fuels for nuclear power plants. Their long half-live period (30.17 years for ¹³⁷Cs and 28.80 years for ⁹⁰Sr) makes them very dangerous radionuclides. Hence the solidification of Cs⁺ and Sr²⁺ is of paramount importance for preventing them from entering the human food chain through water. Despite tremendous efforts for solidification, the long-term stability remains a great challenge due to the experimental limitation and lack of good evaluation indicators for such long half-life radionuclides. Using density functional theory (DFT), we investigate the origin of long-term stability for the solidification of Cs⁺ and Sr²⁺ inside sodalite and establish that the exchange energy and the diffusion barrier play an important role in gaining the long-term stability both thermodynamically and kinetically. The acidity/basicity, solvation, temperature, and diffusion effect are comprehensively studied. It is found that solidification of Cs⁺ and Sr²⁺ is mainly attributed to the solvation effect, zeolitic adsorption ability, and diffusion barriers. The present study provides theoretical evidence to use geopolymers to adsorb Cs⁺ and Sr²⁺ and convert the adsorbed geopolymers to zeolites to achieve solidification of Cs⁺ and Sr²⁺ with long-term stability.

Assessing MP2 frozen natural orbitals in relativistic correlated electronic structure calculations

The high computational scaling with the basis set size and the number of correlated electrons is a bottleneck limiting applications of coupled cluster algorithms, in particular for calculations based on two- or four-component relativistic Hamiltonians, which often employ uncontracted basis sets. This problem may be alleviated by replacing canonical Hartree-Fock virtual orbitals by natural orbitals (NOs). In this paper, we describe the implementation of a module for generating NOs for correlated wavefunctions and, in particular, second order Møller-Plesset perturbation frozen natural orbitals (MP2FNOs) as a component of our novel implementation of relativistic coupled cluster theory for massively parallel architectures [Pototschnig et al. J. Chem. Theory Comput. 17, 5509, (2021)]. Our implementation can manipulate complex or quaternion density matrices, thus allowing for the generation of both Kramers-restricted and Kramers-unrestricted MP2FNOs. Furthermore, NOs are re-expressed in the parent atomic orbital (AO) basis, allowing for generating coupled cluster singles and doubles NOs in the AO basis for further analysis. By investigating the truncation errors of MP2FNOs for both the correlation energy and molecular properties-electric field gradients at the nuclei, electric dipole and quadrupole moments for hydrogen halides HX (X = F-Ts), and parity-violating energy differences for H₂Z₂ (Z = O-Se)-we find MP2FNOs accelerate the convergence of the correlation energy in a roughly uniform manner across the Periodic Table. It is possible to obtain reliable estimates for both energies and the molecular properties considered with virtual molecular orbital spaces truncated to about half the size of the full spaces.