Cyclic aromatic systems with hypervalent centers

Supramolecular trapping of a cationic all-metal σ-aromatic {Bi4} ring

Aromaticity in organic molecules is well defined, but its role in metal-only rings remains controversial. Here we introduce a supramolecular stabilization approach of a cationic {Bi4} rhomboid within the symmetric charge sphere of two bowl-shaped dianionic calix[4]pyrrolato indinates. Crystallographic and spectroscopic characterization, quantum chemical analysis and magnetically induced ring currents indicate σ-aromaticity in the formally tetracationic 16-valence electron [Bi4]4+ ring. Computational screening for other p-block elements identifies the planar rhomboid as the globally preferred structure for 16-valence electron four-atomic clusters. The aromatic [Bi4]4+ is isoelectronic to the [Al4]4-, a motif previously observed as antiaromatic in Li3[Al4]- in the gas phase. Thus, subtle factors such as charge isotropy seem to decide over aromaticity or antiaromaticity, advising for caution in debates based on the Hückel model-a concept valid for second-row elements but less deterministic for the heavier congeners.

CHAL336 Benchmark Set: How Well Do Quantum-Chemical Methods Describe Chalcogen-Bonding Interactions?

We present the CHAL336 benchmark set-the most comprehensive database for the assessment of chalcogen-bonding (CB) interactions. After careful selection of suitable systems and identification of three high-level reference methods, the set comprises 336 dimers each consisting of up to 49 atoms and covers both σ- and π-hole interactions across four categories: chalcogen-chalcogen, chalcogen-π, chalcogen-halogen, and chalcogen-nitrogen interactions. In a subsequent study of DFT methods, we re-emphasize the need for using proper London dispersion corrections when treating noncovalent interactions. We also point out that the deterioration of results and systematic overestimation of interaction energies for some dispersion-corrected DFT methods does not hint at problems with the chosen dispersion correction but is a consequence of large density-driven errors. We conclude this work by performing the most detailed DFT benchmark study for CB interactions to date. We assess 109 variations of dispersion-corrected and dispersion-uncorrected DFT methods and carry out a detailed analysis of 80 of them. Double-hybrid functionals are the most reliable approaches for CB interactions, and they should be used whenever computationally feasible. The best three double hybrids are SOS0-PBE0-2-D3(BJ), revDSD-PBEP86-D3(BJ), and B2NCPLYP-D3(BJ). The best hybrids in this study are ωB97M-V, PW6B95-D3(0), and PW6B95-D3(BJ). We do not recommend using the popular B3LYP functional nor the MP2 approach, which have both been frequently used to describe CB interactions in the past. We hope to inspire a change in computational protocols surrounding CB interactions that leads away from the commonly used, popular methods to the more robust and accurate ones recommended herein. We would also like to encourage method developers to use our set for the investigation and reduction of density-driven errors in new density functional approximations.

Design, synthesis, and photophysics of bi- and tricyclic fused pyrazolines

A three series of bi-cyclic and tri-cyclic functionalised pyrazoline fluorophores with high quantum yields and positive solvato(fluoro)chromism were designed and synthesised by improved method.

Coordination of a Central Atom by Multiple Intramolecular Pnicogen Bonds

A central pnicogen Z atom (Z = Sb, As) is covalently attached to the O atom of three -O(CH₂)_nX chains where X represents either an aldehyde or amine group. The chain can fold around so that the basic X group can engage in a noncovalent pnicogen bond with the central Z. The formation of up to three pnicogen bonds is energetically favored. The amine appears to engage in stronger pnicogen bonds than does the aldehyde, and bonds to Sb are favored over As, but there is little dependence on the length of the chain. The formation of each successive pnicogen bond reduces the magnitude of the σ-holes surrounding the Z atom, which tends to weaken the attraction for the basic end of the chain.

Not Only Hydrogen Bonds: Other Noncovalent Interactions

In this review, we provide a consistent description of noncovalent interactions, covering most groups of the Periodic Table. Different types of bonds are discussed using their trivial names. Moreover, the new name “Spodium bonds” is proposed for group 12 since noncovalent interactions involving this group of elements as electron acceptors have not yet been named. Excluding hydrogen bonds, the following noncovalent interactions will be discussed: alkali, alkaline earth, regium, spodium, triel, tetrel, pnictogen, chalcogen, halogen, and aerogen, which almost covers the Periodic Table entirely. Other interactions, such as orthogonal interactions and π-π stacking, will also be considered. Research and applications of σ-hole and π-hole interactions involving the p-block element is growing exponentially. The important applications include supramolecular chemistry, crystal engineering, catalysis, enzymatic chemistry molecular machines, membrane ion transport, etc. Despite the fact that this review is not intended to be comprehensive, a number of representative works for each type of interaction is provided. The possibility of modeling the dissociation energies of the complexes using different models (HSAB, ECW, Alkorta-Legon) was analyzed. Finally, the extension of Cahn-Ingold-Prelog priority rules to noncovalent is proposed.

Evaluating aryl esters as bench-stable C(1)-ammonium enolate precursors in catalytic, enantioselective Michael addition–lactonisations

An evaluation of a range of aryl, alkyl and vinyl esters as prospective C(1)-ammonium enolate precursors in enantioselective Michael addition–lactonisation processes with (E)-trifluoromethylenones using isothiourea catalysis is reported.

Chemical Bonding in Transition Metal Nitride Os3N3 + Cluster: 6π Inorganic Benzene and δ2δ*1δ*1 Aromaticity

Inorganic benzene-like clusters with a planar hexagonal ring are of interest in chemistry, as are new types of aromaticity, multifold aromaticity, and in particular δ aromaticity beyond carbon-based organic systems. Here we report on a computational study of chemical bonding in a binary Os₃N₃ ⁺ D _3h (⁷A₂″) cluster. This transition metal nitride cluster assumes a perfectly planar, heteroatomic, hexagonal geometry. An array of quantum chemistry tools is exploited to elucidate the electronic, structural, and bonding properties of D _3h Os₃N₃ ⁺ cluster, which include canonical molecular orbitals, adaptive natural density partitioning, natural bond orbital analysis, orbital composition calculations, and nucleus-independent chemical shifts. The computational data collectively support the bonding picture of 2-fold π/δ aromaticity: 6π electrons delocalized over all Os/N centers versus an Os-based 4δ framework in the unique δ²δ*¹δ*¹ configuration. The π sextet renders this heteroatomic cluster an inorganic analog of benzene. Transition metal-based inorganic benzenes are unknown in the literature, to our knowledge. The triplet 4δ electron-counting is a rare case of d-orbital aromaticity and δ-aromaticity, following the reversed 4n Hückel rule for aromaticity in a triplet system. This bonding picture is concrete, differing fundamentally from a recent study on the relevant system.

Asymmetric Synthesis of Allenyl α-Amino Amides by an Isothiourea Catalyzed Enantioselective [2,3]-Sigmatropic Rearrangement

Highly efficient catalytic asymmetric [2,3]-sigmatropic rearrangements of propargyl ammonium salts have been accomplished under mild reaction conditions. In the presence of the chiral isothiourea catalyst, a wide range of allenyl α-amino amide derivatives were obtained in generally good yields (up to 99%) with excellent enantioselectivities (up to 96% ee).

An isothiourea-catalyzed asymmetric formal [4 + 2] cycloaddition of in situ generated azoalkenes with C1 ammonium enolates

An efficient isothiourea-catalyzed stereoselective formal [4 + 2] cycloaddition of α-chloro cyclic hydrazones with carboxylic acids has been developed.

Enantioselective Synthesis of 3,5,6-Substituted Dihydropyranones and Dihydropyridinones using Isothiourea-Mediated Catalysis

The scope of dihydropyranone and dihydropyridinone products accessible by isothiourea-catalyzed processes has been expanded and explored through the use of 2-N-tosyliminoacrylates and 2-aroylacrylates in a Michael addition-lactonization/lactamization cascade reaction. Notably, to ensure reproducibility it is essential to use homoanhydrides as ammonium enolate precursors with 2-aroyl acrylates, while carboxylic acids can be used with 2-N-tosyliminoacrylates, delivering a range of 3,5,6-substituted dihydropyranones and dihydropyridinones with high enantioselectivity (typically >90 % ee). The derivatization of the heterocyclic core of a 3,5,6-substituted dihydropyranone through hydrogenation is also reported.

Crystal structure of (2Z)-2-{(5Z)-5-[3-fluoro-2-(4-phenylpiperidin-1-yl)benzylidene]-4-oxo-3-(p-tolyl)-1,3-thiazolidin-2-ylidene}-N-(p-tolyl)ethanethioamide dimethyl sulfoxide monosolvate

The title compound, C₃₇H₃₄FN₃OS₂·C₂H₆OS, was obtained by the Knoevenagel condensation. The thia­zolidine ring is essentially planar (r.m.s. deviation = 0.025 Å) and forms dihedral angles of 4.2 (3), 68.60 (14) and 39.57 (15)° with the attached thio­amide group, p-tolyl group benzene ring and fluoro-substituted benzene ring, respectively. The exocyclic double bonds are in a Z configuration. In the crystal, the dimethyl sulfoxide solvent mol­ecule is connected to the main mol­ecule via an N—H⋯O hydrogen bond. Weak C—H⋯O hydrogen bonds link the components of the structure into a two-dimensional network parallel to (10-1). Weak intra­molecular C—H⋯S hydrogen bonds are also observed. The crystal is an inversion twin with a ratio of twin components 0.78 (2):0.22 (6).

Asymmetric Isothiourea-Catalysed Formal [3+2] Cycloadditions of Ammonium Enolates with Oxaziridines

A highly enantioselective Lewis base-catalysed formal [3+2] cycloaddition of ammonium enolates and oxaziridines to give stereodefined oxazolidin-4-ones in high yield is described. Employing an enantioenriched oxaziridine in this process leads to a matched/mis-matched effect with the isothiourea catalyst and allowed the synthesis of either syn- or anti-stereodefined oxazolidin-4-ones in high d.r., yield and ee. Additionally, the oxazolidin-4-one products have been derivatised to afford functionalised enantioenriched building blocks.

Synthesis and biological evaluation of 2-picolylamide-based diselenides with non-bonded interactions

In this paper, we report the synthesis and biological evaluation of picolylamide-based diselenides with the aim of developing a new series of diselenides with O···Se non-bonded interactions. The synthesis of diselenides was performed by a simple and efficient synthetic route. All the products were obtained in good yields and their structures were determined by 1H-NMR, 13C-NMR and HRMS. All these new compounds showed promising activities when tested in different antioxidant assays. These amides exhibited strong thiol peroxidase-like (TPx) activity. In fact one of the compounds showed 4.66 times higher potential than the classical standard i.e., diphenyl diselenide. The same compound significantly inhibited iron (Fe)-induced thiobarbituric acid reactive species (TBARS) production in rat's brain homogenate. In addition, the X-ray structure of the most active compound showed non-bonded interaction between the selenium and the oxygen atom that are in close proximity and may be responsible for the increased antioxidant activity. The present study provides evidence about the possible biochemical influence of nonbonding interactions on organochalcogens potency.

Exploring the scope of the isothiourea-mediated synthesis of dihydropyridinones

The exploration and expansion of the scope of the isothiourea-mediated synthesis of dihydropyridinones is presented.

Structural Conformers of (1,3-Dithiol-2-ylidene)ethanethioamides: The Balance between Thioamide Rotation and Preservation of Classical Sulfur-Sulfur Hypervalent Bonds

The reaction of N-(2-phthalimidoethyl)-N-alkylisopropylamines and S2Cl2 gave 4-N-(2-phthalimidoethyl)-N-alkylamino-5-chloro-1,2-dithiol-3-thiones that quantitatively cycloadded to dimethyl or diethyl acetylenedicarboxylate to give stable thioacid chlorides, which in turn reacted with one equivalent of aniline or a thiole to give thioanilides or a dithioester. Several compounds of this series showed atropisomers that were studied by a combination of dynamic NMR, simulation of the signals, conformational analysis by DFT methods, and single crystal X-ray diffraction, showing a good correlation between the theoretical calculations, the experimental values of energies, and the preferred conformations in the solid state. The steric hindering of the crowded substitution at the central amine group was found to be the reason for the presence of permanent atropisomers in this series of compounds and the cause of a unique disposition of the thioxo group at close-to-right angles with respect to the plane defined by the 1,3-dithiole ring in the dithiafulvene derivatives, thus breaking the sulfur-sulfur hypervalent bond that is always found in this kind of compounds.

Stereodivergent organocatalytic intramolecular Michael addition/lactonization for the asymmetric synthesis of substituted dihydrobenzofurans and tetrahydrofurans

A stereodivergent asymmetric Lewis base catalyzed Michael addition/lactonization of enone acids into substituted dihydrobenzofuran and tetrahydrofuran derivatives is reported. Commercially available (S)-(-)-tetramisole hydrochloride gives products with high syn diastereoselectivity in excellent enantioselectivity (up to 99:1 d.r.syn/anti , 99 % eesyn ), whereas using a cinchona alkaloid derived catalyst gives the corresponding anti-diastereoisomers as the major product (up to 10:90 d.r.syn/anti , 99 % eeanti ).