Catalytic Transformations of Birch Kraft Pulp

An endoxylanase rapidly hydrolyzes xylan into major product xylobiose via transglycosylation of xylose to xylotriose or xylotetraose

Here, we proposed an effective strategy to enhance a novel endoxylanase (Taxy11) activity and elucidated an efficient catalysis mechanism to produce xylooligosaccharides (XOSs). Codon optimization and recruitment of natural propeptide in Pichia pastoris resulted in achievement of Taxy11 activity to 1405.65 ± 51.24 U/mL. Analysis of action mode reveals that Taxy11 requires at least three xylose (xylotriose) residues for hydrolysis to yield xylobiose. Results of site-directed mutagenesis indicate that residues Glu¹¹⁹, Glu²¹⁰, and Asp⁵³ of Taxy11 are key catalytic sites, while Asp²⁰³ plays an auxiliary role. The novel mechanism whereby Taxy11 catalyzes conversion of xylan or XOSs into major product xylobiose involves transglycosylation of xylose to xylotriose or xylotetraose as substrate, to form xylotetraose or xylopentaose intermediate, respectively. Taxy11 displayed highly hydrolytic activity toward corncob xylan, producing 50.44 % of xylobiose within 0.5 h. This work provides a cost-effective and sustainable way to produce value-added biomolecules XOSs (xylobiose-enriched) from agricultural waste.

5-Hydroxymethylfurfural (HMF) Production from Real Biomasses

The present paper reviews recent advances on the direct synthesis of 5-hydroxymethylfurfural (HMF) from different kinds of raw biomasses. In particular, in the paper HMF production from: (i) edible biomasses; (ii) non-edible lignocellulosic biomasses; (iii) food wastes (FW) have been reviewed. The different processes and catalytic systems have been reviewed and their merits, demerits and requirements for commercialisation outlined.

Potential and challenges of zeolite chemistry in the catalytic conversion of biomass

This review emphasizes the progress, potential and future challenges in zeolite catalysed biomass conversions and relates these to concepts established in existing petrochemical processes.

Critical design of heterogeneous catalysts for biomass valorization: current thrust and emerging prospects

Catalysis in the heterogeneous phase plays a crucial role in the valorization of biorenewable substrates with controlled reactivity, efficient mechanical process separation, greater recyclability and minimization of environmental effects.

Production of renewable hexanols from mechanocatalytically depolymerized cellulose by using Ir-ReOx /SiO2 catalyst

Hexanols were produced in high yield by conversion of cellulose over Ir-ReOx /SiO2 (molar ratio Re/Ir=2) catalyst in biphasic reaction system (n-decane+H2 O). The cellulose was depolymerized by mechanocatalysis with the aid of H2 SO4 . The influence of solvent amount, reaction temperature and hydrogen pressure was systematically investigated and the highest yield of hexanols reached 60 % under the conditions of n-decane/water ∼2 (v/v), 413 K, 10 MPa H2 for 24 h. Mechanocatalytic depolymerization of cellulose with the aid of H2 SO4 or HCl and the use of sufficient n-decane were very crucial for the production of hexanols. H2 SO4 not only catalyzed cellulose to water-soluble oligosaccharides but also promoted the hydrogenolysis activity of Ir-ReOx /SiO2 catalyst. The role of n-decane was to extract hexanols and to suppress over-hydrogenolysis of hexanols to n-hexane.

Recent advances in the production of polyols from lignocellulosic biomass and biomass-derived compounds

This review summarizes the recent advances in biomass upgrading for polyol production with an emphasis on the formation of glycols.

Tuning the acid/metal balance of carbon nanofiber-supported nickel catalysts for hydrolytic hydrogenation of cellulose

Carbon nanofibers (CNFs) are a class of graphitic support materials with considerable potential for catalytic conversion of biomass. Earlier, we demonstrated the hydrolytic hydrogenation of cellulose over reshaped nickel particles attached at the tip of CNFs. The aim of this follow-up study was to find a relationship between the acid/metal balance of the Ni/CNFs and their performance in the catalytic conversion of cellulose. After oxidation and incipient wetness impregnation with Ni, the Ni/CNFs were characterized by various analytical methods. To prepare a selective Ni/CNF catalyst, the influences of the nature of oxidation agent, Ni activation, and Ni loading were investigated. Under the applied reaction conditions, the best result, that is, 76 % yield in hexitols with 69 % sorbitol selectivity at 93 % conversion of cellulose, was obtained on a 7.5 wt % Ni/CNF catalyst prepared by chemical vapor deposition of CH(4) on a Ni/γ-Al(2)O(3) catalyst, followed by oxidation in HNO(3) (twice for 1 h at 383 K), incipient wetness impregnation, and reduction at 773 K under H(2). This preparation method leads to a properly balanced Ni/CNF catalyst in terms of Ni dispersion and hydrogenation capacity on the one hand, and the number of acidic surface-oxygen groups responsible for the acid-catalyzed hydrolysis on the other.