Noninvasive Spatiotemporal Profiling of the Processes of Impregnation and Drying within Mo/Al2O3 Catalyst Bodies by a Combination of X-ray Absorption Tomography and Diagonal Offset Raman Spectroscopy

Oxidative Dehydrogenation of Ethane with CO2 over Mo/LDO Catalyst: The Active Species of Mo Controlled by LDO

A series of the layered double oxides supported molybdenum oxide catalysts were synthesized and evaluated in the oxidative dehydrogenation of ethane with CO2 (CO2-ODHE). The 22.3 wt% Mo/LDO catalyst delivered a 92.3%selectivity to ethylene and a 7.9% ethane conversion at relatively low temperatures. The molybdenum oxide catalysts were fully characterized by XRD, BET, SEM, TEM, UV–vis, Raman TG, and XPS. Isolated [MoO4]2− dominated on the surface of the fresh 12.5 wt% Mo/LDO catalyst. With the increase of the Mo content, the Mo species transformed from [MoO4]2− to [Mo7O24]6− and [Mo8O26]4− on the 22.3 wt% and 30.1 wt% Mo/LDO catalysts, respectively. The redox mechanism was proposed and three Mo species including [MoO4]2−, [Mo7O24]6−, and [Mo8O26]4− showed quite different functions in the CO2-ODHE reaction: [MoO4]2−, with tetrahedral structure, preferred the non-selective pathway; [Mo7O24]6−, with an octahedral construction, promoted the selective pathway; and the existence of [Mo8O26]4− reduced the ability to activate ethane. This work provides detailed insights to further understand the relationship between structure–activity and the role of surface Mo species as well as their aggregation state in CO2-ODHE.

Controlled Thermal Conversion Strategy to Provide Metal-Organic Framework-Supported Composite Catalysts

Metal-organic framework (MOF)-supported metal/metal compound nanoparticles (NPs) have emerged as a new class of composite catalysts. However, huge challenges prevail in placing such NPs in the MOF pores because of the poor solubility of metal/metal oxides, limited availability of suitable precursors, metastable attribute of given metal ions, and lower thermal stability of MOFs compared to conventional porous materials. Based on the difference between the thermal stability of the precursor and MOFs, we successfully developed a controlled thermal conversion (CTC) method to load cobalt(II) oxide (CoO) NPs into the framework of MOF (MIL-101) to conveniently obtain a composite catalyst, CoO@MIL-101, which is a very rare example of pure CoO NP-loaded composite catalyst that shows excellent catalytic activity in the selective oxidation of benzyl alcohol. This CTC strategy opens up a pathway for impregnating MOF supports with specific NPs, which is further confirmed by preparing the first CuBr@MOF-type composite catalyst.

Investigation of MoOx/Al2O3 under Cyclic Operation for Oxidative and Non-Oxidative Dehydrogenation of Propane

A MoOx/Al2O3 catalyst was synthesised and tested for oxidative (ODP) and non-oxidative (DP) dehydrogenation of propane in a reaction cycle of ODP followed by DP and a second ODP run. Characterisation results show that the fresh catalyst contains highly dispersed Mo oxide species in the +6 oxidation state with tetrahedral coordination as [MoVIO4]2− moieties. In situ X-ray Absorption Spectroscopy (XAS) shows that [MoVIO4]2− is present during the first ODP run of the reaction cycle and is reduced to MoIVO2 in the following DP run. The reduced species are partly re-oxidised in the subsequent second ODP run of the reaction cycle. The partly re-oxidised species exhibit oxidation and coordination states that are lower than 6 but higher than 4 and are referred to as MoxOy. These species significantly improved propene formation (relatively 27% higher) in the second ODP run at similar propane conversion activity. Accordingly, the initial tetrahedral [MoVIO4]2− present during the first ODP run of the reaction cycle is active for propane conversion; however, it is unselective for propene. The reduced MoIVO2 species are relatively less active and selective for DP. It is suggested that the MoxOy species generated by the reaction cycle are active and selective for ODP. The vibrational spectroscopic data indicate that the retained surface species are amorphous carbon deposits with a higher proportion of aromatic/olefinic like species.