Baeyer–Villiger Oxidation Using Hydrogen Peroxide

Highly Selective Electrochemical Baeyer-Villiger Oxidation through Oxygen Atom Transfer from Water

The Baeyer-Villiger oxidation of ketones is a crucial oxygen atom transfer (OAT) process used for ester production. Traditionally, Baeyer-Villiger oxidation is accomplished by thermally oxidizing the OAT from stoichiometric peroxides, which are often difficult to handle. Electrochemical methods hold promise for breaking the limitation of using water as the oxygen atom source. Nevertheless, existing demonstrations of electrochemical Baeyer-Villiger oxidation face the challenges of low selectivity. We report in this study a strategy to overcome this challenge. By employing a well-known water oxidation catalyst, Fe2O3, we achieved nearly perfect selectivity for the electrochemical Baeyer-Villiger oxidation of cyclohexanone. Mechanistic studies suggest that it is essential to produce surface hydroperoxo intermediates (M-OOH, where M represents a metal center) that promote the nucleophilic attack on ketone substrates. By confining the reactions to the catalyst surfaces, competing reactions (e.g., dehydrogenation, carboxylic acid cation rearrangements, and hydroxylation) are greatly limited, thereby offering high selectivity. The surface-initiated nature of the reaction is confirmed by kinetic studies and spectroelectrochemical characterizations. This discovery adds nucleophilic oxidation to the toolbox of electrochemical organic synthesis.

Organocatalytic activation of hydrogen peroxide: towards green and sustainable oxidations

The advent of organocatalysis provided an additional option in every researcher's arsenal, towards the development of elegant and sustainable protocols for various organic transformations. Oxidation reactions are considered to be key in organic synthesis since oxygenated functionalities appear in many natural products. Hydrogen peroxide is categorized as a green oxidant, since its only by-product is water, offering novel opportunities for the development of green and sustainable protocols. In this review article, we intend to present recent developments in the field of the organocatalytic activation of hydrogen peroxide, providing useful insight into the applied oxidative protocols. At the same time, we will present some interesting mechanistic studies, providing information on the oxygen transfer processes.

Mechanism and dynamics of Baeyer-Villiger oxidation of furfural to maleic anhydride in presence of H2O2 and Au clusters

CONTEXT

The increasing demand for fuels and chemicals in the world has prompted the exploration of various forms of renewable energy resources. Using C5-based furfural as the platform to replace the fossil energy resources is greatly attractive because of its abundance and environmental friendliness. Here we study the activity, selectivity, and possible reaction pathways for the Baeyer-Villiger oxidation of furfural over small Au clusters using hydrogen peroxide as oxidant. Furfural reacts with hydrogen peroxide in the presence of the catalysts with 93% selectivity towards maleic anhydride. Natural population analysis, frontier molecular orbital analysis, and spectroscopic analysis are used to illustrate the interaction mechanism between C5H4O2, H2O2, and Au. Reaction pathways leading to the formation of maleic anhydride are also explored. The reaction of C5H4O2 with H2O2 in the absence of a catalyst bears a relatively high transition state energy barrier of 2.98 eV for the first step involving absorption of H atom of H2O2 on the -OH group of C5H4O2. This is in agreement with the blank experiment where there were rare oxidation products observed in the absence of the metal cluster catalysts. On the other hand, transition state energies in the presence of the Au metal clusters are lower and the most feasible pathway is where the substrate and H2O2 co-bind on the Au catalyst and H2O2 molecule transfers an oxygen to the substrate, leading to the cleavage of the O-O bond.

METHODS

DFT calculations were done with B3PW91 functional. 6-311G(df, p) basis set was used for C, O, and H and aug-cc-pVDZ-PP was used for gold atoms. Gaussian 09 software was used for the calculations. Multiwfn 3.7 dev was used for the quantum theory of atoms-in-molecules (QTAIM) investigations.

The Al-Containing Silicates Modified with Organic Ligands and SnO2 Nanoparticles for Catalytic Baeyer-Villiger Oxidation and Aerobic Carboxylation of Carbonyl Compounds

The Baeyer-Villiger Oxidation (BVO) of ketones and aldehydes produce lactones and formates, while aerobic carboxylation of aldehydes manufactures carboxylic acids, both having high added value. This work prepared a series of Al-containing silicates modified with organic ligands and SnO₂ nanoparticles, which were then employed as catalyst in BVO and carboxylation. Characterizations revealed the morphology of the synthesized catalyst was changed from micron-sized thin sheets to smaller blocks, and then to uniform nanoparticles (size of 50 nm) having the doped SnO₂ nanoparticles with a size of 29 nm. All catalysts showed high BET surface areas featuring silt-like mesopores. In determining the priority of BVO and carboxylation, an influence evaluation of the parameters showed the order to be substrate > oxidant > solvent > catalyst. Cyclic aliphatic ketones were suitable for BVO, but linear aliphatic and aromatic aldehydes for carboxylation. Coordination of (S)-binaphthol or doping of Sn into catalyst showed little influence on BVO under m-CPBA, but the Sn-doped catalyst largely increased BVO under (NH₄)₂S₂O₈ and H₂O₂. Calculations revealed that the catalyst containing both Al and Sn could give BVO intermediates lower energies than the Sn-beta zeolite model. The present system exhibited merits including wider substrate scope, innocuous catalytic metal, greener oxidant, as well as lower catalyst cost.

Functionalizable and Chemically Recyclable Thermoplastics from Chemoselective Ring-Opening Polymerization of Bio-renewable Bifunctional α-Methylene-δ-valerolactone

It is a highly attractive strategy to develop chemically recyclable polymers to establish a circular plastic economy. Despite the recent advancements, chemically recyclable polymers still face challenges including high energy cost for polymer preparation or recycling, poor monomer recovery selectivity and efficiency as well as undesired material performance. In this contribution, we present the chemoselective controlled ring-opening polymerization of bio-renewable bifunctional α-methylene-δ-valerolactone (MVL) to produce exclusive functionalizable polyester using strong base/urea binary catalysts. The obtained polyester with high molar mass exhibits good tensile strength comparable to that of some commodity plastics. Remarkably, the obtained polyester can be depolymerized to recover pristine monomer with a 96 % yield by thermolysis, thus successfully establishing a closed-loop life cycle.

Mechanical Insights into Activation of Peroxides by Quinones: Formation of Oxygen-Centered Radicals or Singlet Oxygen

In this work, the mechanism of the activation of peroxides by quinones has been investigated through quantum chemical calculations. Hydrogen peroxide (H₂O₂), peroxomonosulfate (PMS), peracetic acid (PAA), and CH₃OOH were chosen as the model peroxides and p-benzoquinone (p-BQ) and tetrachloro-1,4-benzoquinone (TCBQ) as the model quinones. The nucleophilic attack of peroxides can occur on the carbonyl and olefinic carbons of quinones. For p-BQ, the nucleophilic attack of HO₂^-, CH₃OO^-, PMS, and PAA might prefer to occur on the carbonyl carbons, which have more positive atomic charges. Then, further transformation could not be induced from the addition of HO₂^- and CH₃OO^- to p-BQ. Comparatively, singlet oxygen (¹O₂) could be generated in the cases of PMS and PAA. For TCBQ, the chlorine atoms cause the olefinic carbons to carry more positive atomic charges, and then, HO₂^- preferred to add to the olefinic carbons, which might induce the formation of the hydroxyl radical (^•OH). The activation of PMS by TCBQ was similar to that by p-BQ, with the kinetical feasibility of ¹O₂ formation. These findings may provide some theoretical insights into the reaction of peroxides with quinones, especially into the interconnection between the substitutes and the formation of oxygen-centered radicals (e.g., ^•OH) and ¹O₂.

Di(hydroperoxy)adamantane adducts: synthesis, characterization and application as oxidizers for the direct esterification of aldehydes

The di(hydroperoxy)adamantane adducts of water (1) and phosphine oxides p-Tol₃PO·(HOO)₂C(C₉H₁₄) (2), o-Tol₃PO·(HOO)₂C(C₉H₁₄) (3), and Cy₃PO·(HOO)₂C(C₉H₁₄) (4), as well as a CH₂Cl₂ adduct of a phosphole oxide dimer (8), have been created and investigated by multinuclear NMR spectroscopy, and by Raman and IR spectroscopy. The single crystal X-ray structures for 1-4 and 8 are reported. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the di(hydroperoxy)adamantane adducts. The Raman ν(O-O) stretching bands of 1-4 prove that the peroxo groups are present in the solids. Selected di(hydroperoxy)alkane adducts, in combination with AlCl₃ as catalyst, have been applied for the direct oxidative esterification of n-nonyl aldehyde, benzaldehyde, p-methylbenzaldehyde, p-bromobenzaldehyde, and o-hydroxybenzaldehyde to the corresponding methyl esters. The esterification takes place in an inert atmosphere, under anhydrous and oxygen-free conditions, within a time frame of 45 minutes to 5 hours at room temperature. Hereby, two oxygen atoms per adduct assembly are active with respect to the quantitative transformation of the aldehyde into the ester.

A Unifying Bioinspired Synthesis of (-)-Asperaculin A and (-)-Penifulvin D

The first syntheses of the isomeric dioxafenestrene natural products (−)-asperaculin A and (−)-penifulvin D are reported. Each target is formed selectively by choice of oxidant in a final divergent bioinspired Baeyer–Villiger (BV) reaction. Density functional theory calculations reveal that electrostatic interactions between the oxidant leaving group and the lactone motif accounts for a reversal of selectivity with H₂O₂/H₃O⁺ compared to peracids. Synthetic features include forging the polycyclic carbon framework with a diastereoselective meta-photocycloaddition biased by an ether substituent at the aryl α-position. The encumbered tertiary alcohol was installed by cyanation of a ketone intermediate followed by nonaqueous hydrolysis of the resulting delicate cyanohydrin.

How neutral nitrogen-containing compounds are oxidized in oxidative-denitrogenation of liquid fuel with TiO2@carbon

Oxidative-denitrogenation (ODN) of indole (IND) and methyl-substituted INDs (methyl-INDs), representative neutral nitrogen-containing compounds (NCCs), was carried out with TiO₂@C and H₂O₂ as heterogeneous catalyst and oxidant, respectively, under ultrasound irradiation. The oxidation of INDs progressed through radical formation, as evidenced by electron spin resonance and radical scavenger experiments. The oxidized position of INDs in the ODN process was checked via characterization of the obtained products. It was observed that the oxidation finally occurred on the carbon rather than on the nitrogen atom of INDs, unlike the oxidation of basic NCCs (e.g., oxidation on the nitrogen atom, as respective N-oxides were formed) and sulfur-containing compounds. To understand the relative reactivity and oxidation position, electron density (ED) on the nitrogen atom of the studied INDs and relative stability of representative intermediates/products were calculated. It could be confirmed that ED on the nitrogen atom of the INDs is very important in the oxidation of INDs since the ODN reactivity of INDs was enhanced with increasing ED on the nitrogen atom of the investigated INDs. Moreover, theoretical analyses of the relative stability of substrate and intermediates/products (especially for IND) can explain the route for the observed final products in ODN. In other words, oxygen on the nitrogen atom, obtained via the first step of oxidation (electrophilic addition of an active oxygen atom on nitrogen), moves to the nearby carbon atom, because of the relative stability of the intermediates and products.

Di(hydroperoxy)cycloalkane Adducts of Triarylphosphine Oxides: A Comprehensive Study Including Solid-State Structures and Association in Solution

Four new di(hydroperoxy)cycloalkane adducts (Ahn adducts) of p-Tol₃PO (1) and o-Tol₃PO (2), namely, p-Tol₃PO·(HOO)₂C(CH₂)₅ (3), o-Tol₃PO·(HOO)₂C(CH₂)₅ (4), p-Tol₃PO·(HOO)₂C(CH₂)₆ (5), and o-Tol₃PO·(HOO)₂C(CH₂)₆ (6), have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The ³¹P NMR data are in accordance with hydrogen bonding of the di(hydroperoxy)alkanes to the P═O groups of the phosphine oxides. Due to their high solubility in organic solvents, natural abundance ¹⁷O NMR spectra of 1-6 could be recorded, providing the signals for the P═O groups and additionally the two different oxygen nuclei in the O-OH groups in the adducts 3-6. The association and mobility of 3-6 were explored by ¹H DOSY (diffusion ordered spectroscopy) NMR, which indicated persistent hydrogen bonding of the adducts in solution. Competition experiments with phosphine oxides allowed ranking of the affinities of the di(hydroperoxy)cycloalkanes for the different phosphine oxide carriers. On the basis of variable temperature ³¹P NMR investigations, the Gibbs energies of activation ΔG^‡ for the adduct dissociation processes of 3-6 at different temperatures, as well as the enthalpy ΔH^‡ and entropy ΔS^‡ of activation, have been determined. IR spectroscopy of 3-6 corroborated the hydrogen bonding, and in the Raman spectra, the ν(O-O) stretching bands have been identified, confirming the presence of peroxy groups in the solid materials. The high solubilities in selected organic solvents have been quantified.

Phosphorous-Doped Graphitic Material as a Solid Acid Catalyst for Microwave-Assisted Synthesis of β-Ketoenamines and Baeyer-Villiger Oxidation

Synthesis of phosphorous-doped graphitic materials (P-Gc) using phytic acid as a precursor was done in a microwave oven in a cost- and time-effective green way. The material was used as a solid acid catalyst for microwave (MW)-assisted synthesis of β-ketoenamines and Baeyer-Villiger (BV) oxidation. In the case of BV oxidation, hydrogen peroxide (H2O2) was used as a green oxidant. For β-ketoenamines, in most cases, 100% conversion with an ∼95% yield was achieved in ethyl acetate medium. In solvent-free conditions, the yield of β-ketoenamines was ∼75%. A kinetic study suggested that the resonance stabilization of the positive reaction center happens in the transition state for β-ketoenamine synthesis. In BV oxidation, cyclic ketones were converted to their corresponding cyclic esters in good to high yields (∼80% yield) in a shorter reaction time (6-20 min). As per our knowledge, this is the first report of BV oxidation catalyzed by a heteroatom-doped graphitic material. For BV oxidation, the phosphoric acid functional groups present in P-Gc might increase the electrophilicity of the carbonyl group of the ketones to compensate for the weakness of H2O2 as a nucleophile and a spiro-bisperoxide intermediate has been identified in high-resolution mass spectrometry.

Hydrogen peroxide adducts of triarylphosphine oxides

Five new hydrogen peroxide adducts of phosphine oxides (p-Tol₃PO·H₂O₂)₂ (1), (o-Tol₃PO·H₂O₂)₂ (2), (o-Tol₂PhPO·H₂O₂)₂ (3), (p-Tol₃PO)₂·H₂O₂ (4), and (o-TolPh₂PO)₂·H₂O₂ (5), and the water adduct (o-Tol₂PhPO·H₂O)₂ (6) have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the hydrogen peroxide. The mono- versus dimeric nature of the adduct assemblies has been investigated by DOSY NMR experiments. Raman spectroscopy of the symmetric adducts and the ν(O-O) stretching bands confirm the presence of hydrogen-bonded hydrogen peroxide in the solid materials. The solubilities in organic solvents have been quantified. Due to the high solubilities of 1-6 in organic solvents their ¹⁷O NMR spectra could be recorded in natural abundance, providing well-resolved signals for the P[double bond, length as m-dash]O and O-O groups. The adducts 1-5 have been probed regarding their stability in solution at 105 °C. The decomposition of the adduct 1 takes place by loss of the active oxygen atoms in two steps.

Flavinium and Alkali-Metal Assembly on Sulfated Chitin: A Heterogeneous Supramolecular Catalyst for H2 O2 -Mediated Oxidation

Heterogeneous multiple-catalyst assemblies were developed in which the flavinium cation and Na or Li cations were easily immobilized on a chitin-derived anionic polymeric scaffold through noncovalent ionic interactions. The supramolecular flavinium catalysts were successfully employed in the environmentally friendly heterogeneous Baeyer-Villiger oxidation and sulfoxidation by H₂ O₂ . Owing to the cooperative catalytic effect of flavinium, alkali metal, and sulfated chitin, the supramolecular flavinium assembly showed higher catalytic activity for the Baeyer-Villiger oxidation of cyclic ketones than the corresponding homogeneous flavinium catalyst. Because the ionic assembly was stable under the reaction conditions, the catalyst could be readily recovered by simple filtration and reused.

Aqueous microdroplets containing only ketones or aldehydes undergo Dakin and Baeyer-Villiger reactions

The Dakin and Baeyer-Villiger (BV) oxidation reactions require addition of peroxides as oxidants and an acid or a base as a catalyst. Reaction times range from hours to days to obtain target products. Previously, we reported that hydrogen peroxide (H₂O₂) is spontaneously generated in water microdroplets without any added chemicals or applied electrical potential. Here, we report that the Dakin and BV reactions occur in modest yields within milliseconds in aqueous microdroplets at room-temperature without the addition of external peroxides and catalysts. H₂O₂ generation is the result of the special environment of the microdroplet surface, which promotes water autoionization. We find that increasing the content of water and decreasing the droplet size improve the product yield of the Dakin and BV reactions, supporting the contention that the amount of H₂O₂ generated in aqueous microdroplets could induce the two reactions and the reactions occur at or near the air-water interface of the microdroplet surface.

Phosphothreonine (pThr)-Based Multifunctional Peptide Catalysis for Asymmetric Baeyer-Villiger Oxidations of Cyclobutanones

Biologically inspired phosphothreonine (pThr)-embedded peptides that function as chiral Brønsted acid catalysts for enantioselective Baeyer-Villiger oxidations (BV) of cyclobutanones with aqueous H₂O₂ are reported herein. Complementary to traditional BINOL-derived chiral phosphoric acids (CPAs), the functional diversity of the peptidic scaffold provides the opportunity for multiple points of contact with substrates via hydrogen bonding, and the ease of peptide synthesis facilitates rapid diversification of the catalyst structure, such that numerous unique peptide-based CPA catalysts have been prepared. Utilizing a hypothesis-driven design, we identified a pThr-based catalyst that contains an N-acylated diaminopropionic acid (Dap) residue, which achieves high enantioselectivity with catalyst loadings as low as 0.5 mol%. The power of peptide-based multi-site binding is further exemplified through reversal in the absolute stereochemical outcome upon repositioning of the substrate-directing group (ortho- to meta). Modifications to the i+3 residue (^LDap to ^LPhe) lead to an observed enantiodivergence without inversion of any stereogenic center on the peptide catalyst, due to noncovalent interactions. Structure-selectivity and ¹H-¹H-ROESY studies revealed that the proposed hydrogen bonding interactions are essential for high levels of enantioinduction. The ability for the phosphopeptides to operate as multifunctional oxidation catalysts expands the scope of pThr catalysts and provides a framework for the future selective diversification of more complex substrates, including natural products.

Selective synthesis and stabilization of peroxides via phosphine oxides

MEKPO (methyl ethyl ketone peroxide) and other peroxides can be synthesized selectively and stabilized as hydrogen-bonded phosphine oxide adducts.

“Top” or “bottom” switches of a cyclohexanone monooxygenase controlling the enantioselectivity of the sandwiched substrate

Single mutation F432I/L or L435A/G remarkably reversed the (−)-selectivity of WT CHMO_Acineto.

Aerobic Baeyer-Villiger Oxidation Catalyzed by a Flavin-Containing Enzyme Mimic in Water

Direct incorporation of molecular oxygen into small organic molecules has attracted much attention for the development of new environmentally friendly oxidation processes. In line with this approach, bioinspired systems mimicking enzyme activities are of particular interest since they may perform catalysis in aqueous media. Demonstrated herein is the incorporation of a natural flavin cofactor (FMN) into the specific microenvironment of a water-soluble polymer which allows the efficient reduction of the FMN by NADH in aqueous solution. Once reduced, this artificial flavoenzyme can then activate molecular dioxygen under aerobic conditions and result in the Baeyer-Villiger reaction at room temperature in water.

Selective and Sensitive Sensing of Hydrogen Peroxide by a Boronic Acid Functionalized Metal-Organic Framework and Its Application in Live-Cell Imaging

A new boronic acid functionalized Zr(IV) metal-organic framework having the capability of sensing H₂O₂ in live cells is reported. The Zr-MOF bears a UiO-66 structure and contains 2-boronobenzene-1,4-dicarboxylic acid (BDC-B(OH)₂) as a framework linker. The activated Zr-UiO-66-B(OH)₂ compound (called 1') is highly selective for the fluorogenic detection of H₂O₂ in HEPES buffer at pH 7.4, even in the presence of interfering ROS (ROS = reactive oxygen species) and other biologically relevant analytes. The fluorescent probe was found to display extraordinary sensitivity for H₂O₂ (detection limit 0.015 μM) in HEPES buffer, which represents a lower value in comparison to those of the MOF probes documented so far for sensing H₂O₂ using other analytical methods. Taking advantage of its high selectivity and sensitivity for H₂O₂ in HEPES buffer, the probe was successfully employed for the imaging of intracellular H₂O₂. Imaging studies with MDAMB-231 cells revealed the emergence of bright blue fluorescence after loading with probe 1' and subsequent treatment with H₂O₂ solution.

Overriding Traditional Electronic Effects in Biocatalytic Baeyer-Villiger Reactions by Directed Evolution

Controlling the regioselectivity of Baeyer-Villiger (BV) reactions remains an ongoing issue in organic chemistry, be it by synthetic catalysts or enzymes of the type Baeyer-Villiger monooxygenases (BVMOs). Herein, we address the challenging problem of switching normal to abnormal BVMO regioselectivity by directed evolution using three linear ketones as substrates, which are not structurally biased toward abnormal reactivity. Upon applying iterative saturation mutagenesis at sites lining the binding pocket of the thermostable BVMO from Thermocrispum municipale DSM 44069 (TmCHMO) and using 4-phenyl-2-butanone as substrate, the regioselectivity was reversed from 99:1 (wild-type enzyme in favor of the normal product undergoing 2-phenylethyl migration) to 2:98 in favor of methyl migration when applying the best mutant. This also stands in stark contrast to the respective reaction using the synthetic reagent m-CPBA, which provides solely the normal product. Reversal of regioselectivity was also achieved in the BV reaction of two other linear ketones. Kinetic parameters and melting temperatures revealed that most of the evolved mutants retained catalytic activity, as well as thermostability. In order to shed light on the origin of switched regioselectivity in reactions of 4-phenyl-2-butanone and phenylacetone, extensive QM/MM and MD simulations were performed. It was found that the mutations introduced by directed evolution induce crucial changes in the conformation of the respective Criegee intermediates and transition states in the binding pocket of the enzyme. In mutants that destabilize the normally preferred migration transition state, a reversal of regioselectivity is observed. This conformational control of regioselectivity overrides electronic control, which normally causes preferential migration of the group that is best able to stabilize positive charge. The results can be expected to aid future protein engineering of BVMOs.

Partial oxidation of alkanes by dioxiranes formed in situ at low temperature

Partial oxidation catalysts capable of efficiently operating at low temperatures may limit the over-oxidation of alkane substrates and thereby improve selectivity. This work focuses on examining alkane oxidation using completely metal-free organocatalysts, dioxiranes. The dioxiranes employed here are synthesized by oxidation of a ketone using a terminal oxidant, such as hydrogen peroxide. Our work generates the dioxirane in situ, so that the process can be catalytic with respect to the ketone. To date, we have demonstrated selective partial oxidation of adamantane using ketone catalysts resulting in yields upwards of 60% towards 1-adamantanol with greater than 99% selectivity. Furthermore, we have demonstrated that changing the electrophilic character of the ketone R groups to contain more electron-donating ligands facilitates the dioxirane ring formation and improves overall oxidation yields. Isotopic labelling studies using H₂¹⁸O₂ show the preferential incorporation of an ¹⁸O label into the parent ketone, providing evidence for a dioxirane intermediate formed in situ The isotopic labelling studies, along with solvent effect studies, suggest the formation of peracetic acid as a reactive intermediate.This article is part of a discussion meeting issue 'Providing sustainable catalytic solutions for a rapidly changing world'.

Manipulating the stereoselectivity of the thermostable Baeyer–Villiger monooxygenase TmCHMO by directed evolution

The thermostable Baeyer–Villiger monooxygenase TmCHMO and evolved mutants are viable catalysts in stereoselective reactions of structurally different ketones.

“Release and catch” catalysis by tungstate species for the oxidative cleavage of olefins

In the presence of tungstate species supported on zinc-modified tin dioxide (W/Zn–SnO₂), oxidative cleavage of olefins and related compounds using H₂O₂ efficiently proceeds through a “release and catch” catalytic mechanism.

First chemo-enzymatic synthesis of the (R)-Taniguchi lactone and substrate profiles of CAMO and OTEMO, two new Baeyer-Villiger monooxygenases

ABSTRACT

This study investigates the substrate profile of cycloalkanone monooxygenase and 2-oxo-Δ³-4,5,5-trimethylcyclopentenylacetyl-coenzyme A monooxygenase, two recently discovered enzymes of the Baeyer-Villiger monooxygenase family, used as whole-cell biocatalysts. Biooxidations of a diverse set of ketones were performed on analytical scale: desymmetrization of substituted prochiral cyclobutanones and cyclohexanones, regiodivergent oxidation of terpenones and bicyclic ketones, as well as kinetic resolution of racemic cycloketones. We demonstrated the applicability of the title enzymes in the enantioselective synthesis of (R)-(-)-Taniguchi lactone, a building block for the preparation of various natural product analogs such as ent-quinine.

GRAPHICAL ABSTRACT

Self-assembled ion-pair organocatalysis--asymmetric Baeyer-Villiger oxidation mediated by flavinium-cinchona alkaloid dimer

An ion-pair catalyst generated by assembly of a chiral flavinium and a cinchona alkaloid dimer for use in asymmetric Baeyer-Villiger oxidation is presented. Ion-pair formation is essential for enhancing the catalytic activity and stereoselectivity. The catalyst is applicable to structurally diverse 3-substituted cyclobutanones, providing good to excellent enantioselectivities (up to 98 : 2 e.r.). This study provides the first example of self-assembly of a flavin derivative and a base to form a chiral reaction site that enables a highly stereoselective reaction to occur.

Rearrangements of organic peroxides and related processes

This review is the first to collate and summarize main data on named and unnamed rearrangement reactions of peroxides. It should be noted, that in the chemistry of peroxides two types of processes are considered under the term rearrangements. These are conventional rearrangements occurring with the retention of the molecular weight and transformations of one of the peroxide moieties after O-O-bond cleavage. Detailed information about the Baeyer-Villiger, Criegee, Hock, Kornblum-DeLaMare, Dakin, Elbs, Schenck, Smith, Wieland, and Story reactions is given. Unnamed rearrangements of organic peroxides and related processes are also analyzed. The rearrangements and related processes of important natural and synthetic peroxides are discussed separately.

Synthesis of hupehenols A, B, and E from protopanaxadiol

A unified semisynthesis approach from protopanaxadiol to hupehenols A, B, and E was described. The synthesis provided the primary SAR and the possibility of further medicinal development of hupehenols.

Oxidation of a P-C Bond under Mild Conditions

The reactivity of phosphenium dication [(Ph3P)2C-P-NiPr2](2+), 1(2+), towards pyridine N-oxide (O-py) has been investigated. The resulting oxophosphonium dication [(Ph3P)2C(NiPr2)P(O)(O-py)](2+), 2(2+), was surprisingly stabilized by a less nucleophilic O-py ligand instead of pyridine (py). This compound was then identified as an analogue of the elusive Criegee intermediate as it underwent oxygen insertion into the P-C bond through a mechanism usually observed for Baeyer-Villiger oxidations. This oxygen insertion appears to be the first example of a Baeyer-Villiger oxidation involving O-py.