Nanoparticulate Tungsten Oxide for Catalytic Epoxidations

Heterogeneous H2O2-based selective oxidations over zirconium tungstate α-ZrW2O8

Catalytic properties of a crystalline zirconium tungstate, ZrW2O8, the material known mainly for its isotropic negative coefficient of thermal expansion, have been assessed for the liquid-phase selective oxidation of a range of organic substrates comprising CC, OH, S and other functional groups using aqueous hydrogen peroxide as the green oxidant. Samples of ZrW2O8 were prepared by hydrothermal synthesis and characterised by N2 adsorption, PXRD, SEM, EDX, FTIR and Raman spectroscopic techniques. Studies by IR spectroscopy of adsorbed probe molecules (CO and CDCl3) revealed the presence of Brønsted acidic and basic sites on the surface of ZrW2O8. It was demonstrated that ZrW2O8 is able to activate H2O2 under mild conditions and accomplish the epoxidation of CC bonds in alkenes and unsaturated ketones, oxidation of thioethers to sulfoxides and sulfones, along with the oxidation of alcoholic functions to produce ketones and aldehydes. The oxidation of tetramethylethylene and α-terpinene over ZrW2O8 revealed the formation of peroxidation products, 2,3-dimethyl-3-butene-2-hydroperoxide and endoperoxide ascaridole, respectively, indicating the involvement of singlet oxygen in the oxidation process. The ZrW2O8 catalyst preserves its structure and morphology under the turnover conditions and does not suffer from metal leaching. It can be easily recovered, regenerated by calcination, and reused without the loss of activity and selectivity.

Catalytic activity imperative for nanoparticle dose enhancement in photon and proton therapy

Nanoparticle-based radioenhancement is a promising strategy for extending the therapeutic ratio of radiotherapy. While (pre)clinical results are encouraging, sound mechanistic understanding of nanoparticle radioenhancement, especially the effects of nanomaterial selection and irradiation conditions, has yet to be achieved. Here, we investigate the radioenhancement mechanisms of selected metal oxide nanomaterials (including SiO₂, TiO₂, WO₃ and HfO₂), TiN and Au nanoparticles for radiotherapy utilizing photons (150 kVp and 6 MV) and 100 MeV protons. While Au nanoparticles show outstanding radioenhancement properties in kV irradiation settings, where the photoelectric effect is dominant, these properties are attenuated to baseline levels for clinically more relevant irradiation with MV photons and protons. In contrast, HfO₂ nanoparticles retain some of their radioenhancement properties in MV photon and proton therapies. Interestingly, TiO₂ nanoparticles, which have a comparatively low effective atomic number, show significant radioenhancement efficacies in all three irradiation settings, which can be attributed to the strong radiocatalytic activity of TiO₂, leading to the formation of hydroxyl radicals, and nuclear interactions with protons. Taken together, our data enable the extraction of general design criteria for nanoparticle radioenhancers for different treatment modalities, paving the way to performance-optimized nanotherapeutics for precision radiotherapy.

Nanoparticles have recently received attention in radiation therapy since they can act as radioenhancers. In this article, the authors report on the dose enhancement capabilities of a series of nanoparticles based on their metal core composition and beam characteristics, obtaining designing criteria for their optimal performance in specific radiotreatments.

Insights into the effect of oxygen vacancies on the epoxidation of 1-hexene with hydrogen peroxide over WO3−x/SBA-15

The introduction of oxygen vacancies improved 1-hexene epoxidation performance over WO3−x/SBA-15 catalysts, which is attributed to the enhanced Lewis acidity of the active centers and the reduced energy barrier of the rate-determining step.

Synthesis of α,β- and β-Unsaturated Acids and Hydroxy Acids by Tandem Oxidation, Epoxidation, and Hydrolysis/Hydrogenation of Bioethanol Derivatives

We report a reaction platform for the synthesis of three different high‐value specialty chemical building blocks starting from bio‐ethanol, which might have an important impact in the implementation of biorefineries. First, oxidative dehydrogenation of ethanol to acetaldehyde generates an aldehyde‐containing stream active for the production of C₄ aldehydes via base‐catalyzed aldol‐condensation. Then, the resulting C₄ adduct is selectively converted into crotonic acid via catalytic aerobic oxidation (62 % yield). Using a sequential epoxidation and hydrogenation of crotonic acid leads to 29 % yield of β‐hydroxy acid (3‐hydroxybutanoic acid). By controlling the pH of the reaction media, it is possible to hydrolyze the oxirane moiety leading to 21 % yield of α,β‐dihydroxy acid (2,3‐dihydroxybutanoic acid). Crotonic acid, 3‐hydroxybutanoic acid, and 2,3‐dihydroxybutanoic acid are archetypal specialty chemicals used in the synthesis of polyvinyl‐co‐unsaturated acids resins, pharmaceutics, and bio‐degradable/ ‐compatible polymers, respectively.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

Whereas noble metal compounds have long been central in catalysis, Earth-abundant metal-based catalysts have in the same time remained undeveloped. Yet the efficacy of Earth-abundant metal catalysts was already shown at the very beginning of the 20th century with the Fe-catalyzed Haber-Bosch process of ammonia synthesis and later in the Fischer-Tropsch reaction. Nanoscience has revolutionized the world of catalysis since it was observed that very small Au nanoparticles (NPs) and other noble metal NPs are extraordinarily efficient. Therefore the development of Earth-abundant metals NPs is more recent, but it has appeared necessary due to their "greenness". This review highlights catalysis by NPs of Earth-abundant transition metals that include Mn, Fe, Co, Ni, Cu, early transition metals (Ti, V, Cr, Zr, Nb and W) and their nanocomposites with emphasis on basic principles and literature reported during the last 5 years. A very large spectrum of catalytic reactions has been successfully disclosed, and catalysis has been examined for each metal starting with zero-valent metal NPs followed by oxides and other nanocomposites. The last section highlights the catalytic activities of bi- and trimetallic NPs. Indeed this later family is very promising and simultaneously benefits from increased stability, efficiency and selectivity, compared to monometallic NPs, due to synergistic substrate activation.

Dispersed Vanadium in Three-Dimensional Dendritic Mesoporous Silica Nanospheres: Active and Stable Catalysts for the Oxidative Dehydrogenation of Propane in the Presence of CO2

The uniform monodispersed vanadium-doped three-dimensional dendritic mesoporous silica nanospheres (nV-MSNSs) were successfully synthesized in a heterogeneous oil-water biphase stratification reaction system and characterized by several state-of-the-art methods. The synthesized nV-MSNSs were applied to the oxidative dehydrogenation of the propane (ODHP) reaction with the presence of CO₂ and exhibited excellent catalytic performances. The results show that the vanadium loading (1.3-8.0 wt %) evidently influences the textural properties, oxidation state, and polymerization degree of vanadium species of nV-MSNSs. The specific surface area (S_BET), pore diameter (D_p), and pore volume (V_p) of nV-MSNSs decrease with the loading of vanadium species. The excessively high vanadium loading leads to the slight connection of nanospheres, but does not affect the assembly and growth of the three-dimensional (3D) dendritic channels. The percentage of highly dispersed vanadium V^V species gradually increases and attains the maximum value for 5.2V-MSNSs with the loading of vanadium and then decreases with further vanadium addition. The higher-polymerized VO_x species gradually generates above 5.2 wt % vanadium content for nV-MSNSs. The lower-polymerized VO_x species appear to be more active than the higher-polymerized VO_x species. Markedly, the 5.2V-MSNSs exhibit the highest catalytic activity with the initial propane conversion of 58% for the ODHP. The excellent catalytic performance can be maintained after eight reaction-regeneration cycles. The silica mesoporous frameworks can be well preserved in the reaction-regeneration cycles; meanwhile, the highly dispersed vanadium oxide also can be fully recovered after in situ regeneration. Hence, nV-MSNS catalysts exhibit outstanding activity and stability, and it would have a promising application in the DH of alkanes.

Catalytic formation of C(sp3)–F bonds via decarboxylative fluorination with mechanochemically-prepared Ag2O/TiO2 heterogeneous catalysts

Mechanochemically-prepared, Ag₂O-containing solid materials, are shown to be efficient heterogeneous catalysts for the synthesis of C(sp³)–F bonds via decarboxylative fluorination.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

This review presents the recent remarkable developments of efficient Earth-abundant transition-metal nanocatalysts.

Tungsten-promoted titania as solid acid for catalytic hydrolysis of waste bottle PET in supercritical CO2

Tungsten-promoted titania solid acid catalysts were synthesized by a hydrothermal method and used in the hydrolysis of waste bottle polyethylene terephthalate (PET) in supercritical CO₂.

Ordered mesoporous zirconium oxophosphate supported tungsten oxide solid acid catalysts: the improved Brønsted acidity for benzylation of anisole

A series of WO₃ supported on ordered mesoporous zirconium oxophosphate solid acid catalyst was employed in benzylation reaction.