Using Catalytic and Surface-Enhanced Raman Spectroscopy-Active Gold Nanoshells to Understand the Role of Basicity in Glycerol Oxidation

High-Throughput Synthesis of Nanogap-Rich Gold Nanoshells Using Dual-Channel Infusion System

Gold nanoshells have been actively applied in industries beyond the research stage because of their unique optical properties. Although numerous methods have been reported for gold nanoshell synthesis, the labor-intensive and time-consuming production process is an issue that must be overcome to meet industrial demands. To resolve this, we report a high-throughput synthesis method for nanogap-rich gold nanoshells based on a core silica support (denoted as SiO2@Au NS), affording a 50-fold increase in scale by combining it with a dual-channel infusion pump system. By continuously dropping the reactant solution through the pump, nanoshells with closely packed Au nanoparticles were prepared without interparticle aggregation. The thickness of the gold nanoshells was precisely controlled at 2.3-17.2 nm by regulating the volume of the reactant solution added dropwise. Depending on the shell thickness, the plasmonic characteristics of SiO2@Au NS prepared by the proposed method could be tuned. Moreover, SiO2@Au NS exhibited surface-enhanced Raman scattering activity comparable to that of gold nanoshells prepared by a previously reported low-throughput method at the same reactant ratio. The results indicate that the proposed high-throughput synthesis method involving the use of a dual-channel infusion system will contribute to improving the productivity of SiO2@Au NS with tunable plasmonic characteristics.

Plasmonic photocatalytic degradation of tebuconazole and 2,4-dichlorophenoxyacetic acid by Ag nanoparticles-decorated TiO2 tracked by SERS analysis

Chemical oxidation technologies have been notably used for the mineralization of organic pollutants from aqueous effluents, been especially relevant for the degradation of pesticides. In this context, both tebuconazole (TEB) and 2,4-dichlorophenoxyacetic acid (2,4-D) pesticides were photodegraded by a combined catalyst of TiO2 and silver nanoparticles irradiated by UV-A light (λmax = 368 nm), and the experiments were tracked by surface-enhanced Raman scattering (SERS) spectroscopy. For 2,4-D, the degradation of about 70% was observed after almost 200 min, while for TEB, a decrease of 80% of the initial concentration was observed after approximately 100 min. The SERS monitoring allowed the proposal of some by-products, such as oxidized aliphatic chain and triazole from TEB besides glycolic, glyoxylic and dihydroxyacetic acids from 2,4-D. Their toxicities were predicted through ECOSAR software, verifying that most of them were not harmful to populations of fish, Daphnia and green algae. Thus, the performed oxidative process was efficient in the photodecomposition of TEB and 2,4-D pesticides, inclusive in terms of the decreasing of the toxicity of contaminated effluents.

An Overview of Glycerol Electrooxidation Mechanisms on Pt, Pd and Au

In the most recent decade, glycerol electrooxidation (GEOR) has attracted extensive research interest for valorization of glycerol: the conversion of glycerol to value-added products. These reactions at platinum, palladium, and gold electrodes have a lot of uncertainty in their reaction mechanisms, which has generated some controversies. This review gathers many reported experimental results, observations and proposed reaction mechanisms in order to draw a full picture of GEOR. A particular focus is the clarification of two propositions: Pd is inferior to Pt in cleaving the C-C bonds of glycerol during the electrooxidation and the massive production of CO₂ at high overpotentials is due to the oxidation of the already-oxidized carboxylate products. It is concluded that the inferior C-C bond cleavability with Pd electrodes, as compared with Pt electrodes, is due to the inefficiency of deprotonation, and the massive generation of CO₂ as well as other C1/C2 side products is partially caused by the consumption of OH^- at the anodes, as a lower pH reduces the amount of carboxylates and favors the C-C bond scission. A reaction mechanism is proposed in this review, in which the generation of side products are directly from glycerol ("competition" between each side product) rather than from the further oxidation of C2/C3 products. Additionally, GEOR results and associated interpretations for Ni electrodes are presented, as well as a brief review on the performances of multi-metallic electrocatalysts (most of which are nanocatalysts) as an introduction to these future research hotpots.

Shining light on the solid–liquid interface: in situ/operando monitoring of surface catalysis

Many industrially important chemical transformations occur at the interface between a solid catalyst and liquid reactants. In situ and operando spectroscopies offer unique insight into the reactivity of such catalytically active solid–liquid interfaces.

Enhanced photocatalysis and biomolecular sensing with field-activated nanotube-nanoparticle templates

The development of new catalysts for oxidation reactions is of central importance for many industrial processes. Plasmonic catalysis involves photoexcitation of templates/chips to drive and enhance oxidation of target molecules. Raman-based sensing of target molecules can also be enhanced by these templates. This provides motivation for the rational design, characterization, and experimental demonstration of effective template nanostructures. In this paper, we report on a template comprising silver nanoparticles on aligned peptide nanotubes, contacted with a microfabricated chip in a dry environment. Efficient plasmonic catalysis for oxidation of molecules such as p-aminothiophenol results from facile trans-template charge transfer, activated and controlled by application of an electric field. Raman detection of biomolecules such as glucose and nucleobases are also dramatically enhanced by the template. A reduced quantum mechanical model is formulated, comprising a minimum description of key components. Calculated nanotube-metal-molecule charge transfer is used to understand the catalytic mechanism and shows this system is well-optimized.

Plasmonic nanomaterials offer new frontiers as photocatalysis and sensor materials, yet elucidating factors controlling each is a challenge. Here, authors examine the role of electric fields in photocatalysis and biomolecule sensing abilities of peptide-nanotubesupported silver nanoparticles.

Surface-enhanced Raman spectroscopic detection of molecular chemo- and plasmo-catalysis on noble metal nanoparticles

The in situ detection of reactions catalyzed by metal NPs is challenging because the underlying chemical transformations occur at interfaces. Surface-enhanced Raman scattering (SERS), a surface-selective, sensitive and label-free vibrational spectroscopic technique, is ideally suited for monitoring of heterogeneous catalysis with high chemical specificity. A major limitation in the past, however, was that small, catalytically active metal NPs do not exhibit the high plasmonic activity required for SERS. This feature article focuses on the design, synthesis and use of bifunctional NPs with both catalytic and plasmonic activity for in situ SERS detection of reactions catalyzed by metal NPs. We focus on model reactions induced by chemical reducing agents such as hydride or molecular hydrogen as well as on plasmon-induced photo-catalysis including both photo-oxidation and photo-reduction. Finally, we highlight the concept of photo-recycling on halide-containing silver surfaces for unprecedented multi-electron reduction chemistry.

Amplification of surface-enhanced Raman scattering by the oxidation of capping agents on gold nanoparticles

Surface-enhanced Raman spectroscopy is a powerful analytical method, and is especially useful for the detection of nitrogen- and sulfur-containing organic substances in trace amounts. SERS substrates with high enhancement factors can be produced via the aggregation of gold nanoparticles, leading to the formation of ‘hot spots’ – regions of highest electric field intensity and Raman scattering enhancement. Thus, the availability of gold surfaces in ‘hot spots’ for the adsorption of analyte molecules strongly influences the enhancement factor of a substrate. We studied the kinetics of oxidation of dyes with hydrogen peroxide in the presence of citrate-capped gold nanoparticles and discovered the amplification of surface-enhanced Raman scattering, probably due to the oxidation of citrate ligands and the additional adsorption of dye molecules onto vacant spots on the gold surface. Maximum amplification was observed with 3% (v/v) hydrogen peroxide in the reaction medium. Under optimized conditions, model analytes can be detected at concentrations as low as 1 × 10⁻⁹ M, which is ten times lower than the detection limit without hydrogen peroxide addition.

The intensity of a surface-enhanced Raman scattering signal can be amplified by the peroxide-induced oxidation of citrate capping agents on gold nanoparticles.

Gold nanoparticle-loaded filter paper: a recyclable dip-catalyst for real-time reaction monitoring by surface enhanced Raman scattering

We report a robust and recyclable 'dip-catalyst' based on a gold nanoparticle (Au NP)-loaded filter paper composite, prepared by a simple dip-coating process using concentrated Au NP suspensions in toluene. While acting as catalysts, the composites display excellent surface enhanced Raman scattering (SERS) efficiency, allowing the real-time monitoring of chemical reactions.

POSS-derived solid acid catalysts with excellent hydrophobicity for highly efficient transformations of glycerol

New POSS-derived acid catalysts were synthesized, which proved to be highly efficient, and steadily reused for glycerol transformations.

Preparation of THPC-generated silver, platinum, and palladium nanoparticles and their use in the synthesis of Ag, Pt, Pd, and Pt/Ag nanoshells

Seed nanoparticles of Ag, Pt, and Pd (typically ≤4 nm in diameter) were synthesized using tetrakis(hydroxymethyl)phosphonium chloride (THPC) as reducing agent and utilized to prepare Ag, Pt, and Pd nanoshells, as well as hybrid Pt/Ag nanoshells, on silica cores.

Characterisation of gold catalysts

Au-based catalysts have established a new important field of catalysis, revealing specific properties in terms of both high activity and selectivity for many reactions.

The role of chemisorbed hydroxyl species in alkaline electrocatalysis of glycerol on gold

The mechanism of energy conversion in a direct glycerol fuel cell (DGFC) is governed by the anode supported heterogeneous steps of glycerol electro-oxidation. In aerated alkaline electrolytes, glycerol also participates in a base catalyzed process, which can release certain species mixing with the anode catalyzed surface products. As a result, selective probing of the surface catalytic reactions involving such systems can be difficult. The present work addresses this issue for a gold anode by using the analytical capability of cyclic voltammetry (CV). In addition, surface plasmon resonance measurements are used to optically probe the adsorption characteristics of the electrolyte species. The net exchange current of the oxidation process and the transfer coefficient of the rate determining step are evaluated by analyzing the CV data. The interfacial reactions and their products on Au are identified by measuring the number of electrons released during the electro-oxidation of glycerol. The results indicate that these reactions are facilitated by the surface bound hydroxyl species on Au (chemisorbed OH(-) and faradaically formed Au-OH). By comparing the findings for stationary and rotating electrodes, it is shown that, convective mass transport is critical to maintaining efficient progression of the consecutive oxidation steps of glycerol. In the absence of hydrodynamic support, the main surface products of glycerol oxidation appear to be glyceraldehyde, glycerate and malonate, formed through a net six-electron route. In the presence of controlled convection, a ten-electron process is activated, where mesaxolate is the likely additional product.

Catalytic oxidation of cinnamyl alcohol using Au-Ag nanotubes investigated by surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) enables ultrasensitive detection of adsorbed species at the catalyst surface. However, it is quite difficult to combine catalytic and SERS activities on the same material. Here we report the application of well-defined Au-Ag nanotubes as both SERS substrates and catalysts for the oxidation of cinnamyl alcohol. The species adsorbed on the catalyst surfaces at different reaction times were analyzed by SERS. The bimetallic nanotubes prepared via a simple galvanic replacement reaction are highly active in the oxidation of cinnamyl alcohol, but do not avoid a radical-chain reaction and the cleavage of the carbon-carbon double bond. A comparison between changes in bulk composition and the nature of adsorbed species at the surface of the catalyst over time suggests that cinnamaldehyde is formed on the catalyst surface (metal-catalyzed oxidation) and benzaldehyde is probably formed in the bulk solution via a radical-chain pathway. In the presence of 2,6-di-tert-butyl-4-methylphenol, the radical-chain reaction is suppressed and the oxidation reaction produces cinnamaldehyde.

Sailing into uncharted waters: recent advances in the in situ monitoring of catalytic processes in aqueous environments

This review presents recent advances inin situstudies of catalytic processes in the aqueous environment with an outlook of mesoscale imaging.

Controlling the Catalytic Efficiency on the Surface of Hollow Gold Nanoparticles by Introducing an Inner Thin Layer of Platinum or Palladium

The efficiency of heterogeneous catalysis of electron-transfer reactions on the surface of gold nanoshells was changed by adding an inner platinum or palladium nanoshell in the double-shell nanocatalysts. The reduction of 4-nitrothiophenol (4NTP) by borohydride was studied as a model reaction. To confirm the heterogeneous catalytic mechanism, the nanocatalysts were assembled into a monolayer on the surface of a quartz substrate using the Langmuir-Blodgett technique, and the 4NTP was allowed to bind to the surface of gold through a strong thiol bond. The stages of the reduction reaction of 4NTP on the surface of gold were successfully followed by time-resolved surface-enhanced Raman spectroscopy. Palladium was found to increase the catalytic efficiency of the gold surface due to the presence of a new Fermi level of the palladium-gold alloy, while platinum decreased its catalytic efficiency due to the electron-withdrawing effect of platinum atoms, which resulted from the difference in their electrochemical reduction potentials.

Volcano-shape glycerol oxidation activity of palladium-decorated gold nanoparticles

Activity and selectivity of glycerol oxidation were highly dependent upon Pd surface coverage of Pd-on-Au bimetallic catalysts.