The Influence of the Second and Outer Coordination Spheres on Rh(diphosphine)2 CO2 Hydrogenation Catalysts

Synthesis and anti-microbial activity of a new series of bis(diphosphine) rhenium(V) dioxo complexes

Rhenium-based metallodrugs have recently been highlighted as promising candidates for new antibiotics to combat multi-drug resistant (MDR) pathogens. A new class of rhenium(V) dioxo complexes were prepared from readily accessible diphosphine ligands, and have been shown to possess potent activity against Staphylococcus aureus (S. aureus) and Candida albicans (C. albicans) alongside low human cell toxicity.

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as "P₂N₂" ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P^R₂N^R'₂)₂]²⁺ complexes are electrocatalysts for both the oxidation and production of H₂. Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P^R₂N^R'₂)₂]²⁺ complexes for the oxidation and production of H₂, catalysts with diphosphine ligands containing pendant amines have also been demonstrated for several metals for many different reactions, both in solution and immobilized on surfaces. The impact of pendant amines in catalyst design continues to expand.

Group 6 transition metal-based molecular complexes for sustainable catalytic CO2 activation

CO2 activation is one of the key steps towards CO2 mitigation. In this context, the group 6 transition metal-based molecular catalysts can lead the way.

CO2 hydrogenation over functional nanoporous polymers and metal-organic frameworks

CO₂ is one of the major environmental pollutants and its mitigation is attracting huge attention over the years due to continuous increase in this greenhouse gas emission in the atmosphere. Being environmentally hazardous and plentiful presence in nature, CO₂ utilization as C1 resource into fuels and feedstock is very demanding from the green chemistry perspectives. To accomplish this CO₂ utilization issue, functional organic materials like porous organic polymers (POPs), covalent organic frameworks (COFs) as well as organic-inorganic hybrid materials like metal-organic frameworks (MOFs), having characteristics of large surface area, high thermal stability and tunability in the porous nanostructures play significant role in designing the suitable catalyst for the CO₂ hydrogenation reactions. Although CO₂ hydrogenation is a widely studied and emerging area of research, till date review exclusively focused on designing POPs, COFs and MOFs bearing reactive functional groups is very limited. A thorough literature review on this matter will enrich our knowledge over the CO₂ hydrogenation processes and the catalytic sites responsible for carrying out these chemical transformations. We emphasize recent state-of-the art developments in POPs/COFs/MOFs having unique functionalities and topologies in stabilizing metallic NPs and molecular complexes for the CO₂ reduction reactions. The major differences between MOFs and porous organics are critically summarized in the outlook section with the aim of the future benefit in mitigating CO₂ emission from ambient air.

Transfer Hydrogenation from 2-propanol to Acetophenone Catalyzed by [RuCl2(η6-arene)P] (P = monophosphine) and [Rh(PP)2]X (PP = diphosphine, X = Cl−, BF4−) Complexes

The reduction of ketones through homogeneous transfer hydrogenation catalyzed by transition metals is one of the most important routes for obtaining alcohols from carbonyl compounds. The interest of this method increases when opportune catalytic precursors are able to perform the transformation in an asymmetric fashion, generating enantiomerically enriched chiral alcohols. This reaction has been extensively studied in terms of catalysts and variety of substrates. A large amount of information about the possible mechanisms is available nowadays, which has been of high importance for the development of systems with excellent outcomes in terms of conversion, enantioselectivity and Turn Over Frequency. On the other side, many mechanistic aspects are still unclear, especially for those catalytic precursors which have shown only moderate performances in transfer hydeogenation. This is the case of neutral [RuCl2(η6-arene)(P)] and cationic [Rh(PP)2]X (X = anion; P and PP = mono- and bidentate phosphine, respectively) complexes. Herein, a summary of the known information about the Transfer Hydrogenation catalyzed by these complexes is provided with a continuous focus on the more relevant mechanistic features.

Catalytic hydrogenation of CO2 at a structurally rigidified cobalt center

Catalytic hydrogenation of CO₂ occurs at a cobalt center supported by a rigidified PNP ligand revealing higher catalytic performance.

Improving Photocatalysis for the Reduction of CO2 through Non-covalent Supramolecular Assembly

We report the enhancement of photocatalytic performance by introduction of hydrogen-bonding interactions to a Re bipyridine catalyst and Ru photosensitizer system (ReDAC/RuDAC) by the addition of amide substituents, with carbon monoxide (CO) and carbonate/bicarbonate as products. This system demonstrates a more-than-3-fold increase in turnover number (TON_CO = 100 ± 4) and quantum yield (Φ_CO = 23.3 ± 0.8%) for CO formation compared to the control system using unsubstituted Ru photosensitizer (RuBPY) and ReDAC (TON_CO = 28 ± 4 and Φ_CO = 7 ± 1%) in acetonitrile (MeCN) with 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH) as sacrificial reductant. In dimethylformamide (DMF), a solvent that disrupts hydrogen bonds, the ReDAC/RuDAC system showed a decrease in catalytic performance while the control system exhibited an increase, indicating the role of hydrogen bonding in enhancing the photocatalysis for CO₂ reduction through supramolecular assembly. The similar properties of RuDAC and RuBPY demonstrated in lifetime measurements, spectroscopic analysis, and electrochemical and spectroelectrochemical studies revealed that the enhancement in photocatalysis is due not to differences in intrinsic properties of the catalyst or photosensitizer, but to hydrogen-bonding interactions between them.

Rh(i) and Ru(ii) phosphaamidine and phosphaguanidine (1,3-P,N) complexes and their activity for CO2 hydrogenation

Phosphaamidine metal complexes Rh₂Cl₂[Ph₂PC(Ph)[double bond, length as m-dash]NPh]₂μ-CO (1), RuCl₂[Ph₂PC(Ph)[double bond, length as m-dash]N(Ph)]₂ (2), [Rh{ⁱPr₂PC(Ph)[double bond, length as m-dash]NⁱPr}(COD)]BF₄ (3), and RuCl₂[ⁱPr₂PC(Ph)[double bond, length as m-dash]NⁱPr](DMSO)₂ (4) are prepared by combining phosphaamidines Ph₂P-C(Ph)[double bond, length as m-dash]NPh and ⁱPr₂P-C(Ph)[double bond, length as m-dash]NⁱPr (1,3-P,N) with their corresponding metal ions. Complexes 1 and 2 are stable in air while 3 and 4 are stable under inert conditions. For further comparison of structure and stability, a Ru(ii) phosphaguanidine complex, RuCl₂[Me₂NC(PPh₂)[double bond, length as m-dash]NⁱPr](DMSO)₂ (6) was prepared. Complex 6 is stable in air and in the presence of water. The structures of the phosphaamidine and phosphaguanidine complexes, determined using single crystal X-ray diffraction, revealed P,N bidentate coordination. While all five complexes have some activity as precatalysts, complex 6 was the most active.

Metal vs. ligand protonation and the alleged proton-shuttling role of the azadithiolate ligand in catalytic H2 formation with FeFe hydrogenase model complexes

Real-time spectroscopic observation of electron transfer-induced protonation reactivity elucidates the role of the second sphere basic site in a H₂ evolution catalyst.

Electron and proton transfer reactions of diiron complexes [Fe₂adt(CO)₆] (1) and [Fe₂adt(CO)₄(PMe₃)₂] (4), with the biomimetic azadithiolate (adt) bridging ligand, have been investigated by real-time IR- and UV-vis-spectroscopic observation to elucidate the role of the adt-N as a potential proton shuttle in catalytic H₂ formation. Protonation of the one-electron reduced complex, 1^–, occurs on the adt-N yielding 1H and the same species is obtained by one-electron reduction of 1H⁺. The preference for ligand vs. metal protonation in the Fe₂(i,0) state is presumably kinetic but no evidence for tautomerization of 1H to the hydride 1Hy was observed. This shows that the adt ligand does not work as a proton relay in the formation of hydride intermediates in the reduced catalyst. A hydride intermediate 1HHy⁺ is formed only by protonation of 1H with stronger acid. Adt protonation results in reduction of the catalyst at much less negative potential, but subsequent protonation of the metal centers is not slowed down, as would be expected according to the decrease in basicity. Thus, the adtH⁺ complex retains a high turnover frequency at the lowered overpotential. Instead of proton shuttling, we propose that this gain in catalytic performance compared to the propyldithiolate analogue might be rationalized in terms of lower reorganization energy for hydride formation with bulk acid upon adt protonation.

Evaluating the impacts of amino acids in the second and outer coordination spheres of Rh-bis(diphosphine) complexes for CO2 hydrogenation

The influence of a biologically inspired second and outer coordination sphere on Rh-bis(diphosphine) CO₂ hydrogenation catalysts was explored.

Incorporation of redox-inactive cations promotes iron catalyzed aerobic C-H oxidation at mild potentials

The synthesis and characterization of the Schiff base complexes Fe(ii) (2M) and Fe(iii)Cl (3M), where M is a K+ or Ba2+ ion incorporated into the ligand, are reported. The Fe(iii/ii) redox potentials are positively shifted by 440 mV (2K) and 640 mV (2Ba) compared to Fe(salen) (salen = N,N'-bis(salicylidene)ethylenediamine), and by 70 mV (3K) and 230 mV (3Ba) compared to Fe(Cl)(salen), which is likely due to an electrostatic effect (electric field) from the cation. The catalytic activity of 3M towards the aerobic oxidation of allylic C-H bonds was explored. Prior studies on iron salen complexes modified through conventional electron-donating or withdrawing substituents found that only the most oxidizing derivatives were competent catalysts. In contrast, the 3M complexes, which are significantly less oxidizing, are both active. Mechanistic studies comparing 3M to Fe(salen) derivatives indicate that the proximal cation contributes to the overall reactivity in the rate determining step. The cationic charge also inhibits oxidative deactivation through formation of the corresponding Fe2-μ-oxo complexes, which were isolated and characterized. This study demonstrates how non-redox active Lewis acidic cations in the secondary coordination sphere can be used to modify redox catalysts in order to operate at milder potentials with a minimal impact on the reactivity, an effect that was unattainable by tuning the catalyst through traditional substituent effects on the ligand.

Molecular Cobalt Complexes with Pendant Amines for Selective Electrocatalytic Reduction of Carbon Dioxide to Formic Acid

We report here on a new series of CO₂-reducing molecular catalysts based on Earth-abundant elements that are very selective for the production of formic acid in dimethylformamide (DMF)/water mixtures (Faradaic efficiency of 90 ± 10%) at moderate overpotentials (500-700 mV in DMF measured at the middle of the catalytic wave). The [CpCo(P^R₂N^R'₂)I]⁺ compounds contain diphosphine ligands, P^R₂N^R'₂, with two pendant amine residues that act as proton relays during CO₂-reduction catalysis and tune their activity. Four different P^R₂N^R'₂ ligands with cyclohexyl or phenyl substituents on phosphorus and benzyl or phenyl substituents on nitrogen were employed, and the compound with the most electron-donating phosphine ligand and the most basic amine functions performs best among the series, with turnover frequency >1000 s^-1. State-of-the-art benchmarking of catalytic performances ranks this new class of cobalt-based complexes among the most promising CO₂-to-formic acid reducing catalysts developed to date; addressing the stability issues would allow further improvement. Mechanistic studies and density functional theory simulations confirmed the role of amine groups for stabilizing key intermediates through hydrogen bonding with water molecules during hydride transfer from the Co center to the CO₂ molecule.

Evaluating the role of acidic, basic, and polar amino acids and dipeptides on a molecular electrocatalyst for H2 oxidation

Outer coordination sphere interactions reduce the overpotential for H₂ oxidation catalysts (brown ellipse) compared to those that have –COOH groups but don't have stabilizing interactions (blue ellipse).

Polymer coordination promotes selective CO2 reduction by cobalt phthalocyanine

Cobalt phthalocyanine (CoPc) is a known electrocatalyst for the carbon dioxide reduction reaction (CO2RR) that, when adsorbed onto edge-plane graphite (EPG) electrodes, shows modest activity and selectivity for CO production along with co-generation of H2. In contrast, electrodes modified with CoPc immobilized in a poly-4-vinylpridine (P4VP) film show dramatically enhanced activity and selectivity compared to those modified with CoPc alone. CoPc-P4VP films display a faradaic efficiency of ∼90% for CO, with a turnover frequency of 4.8 s-1 at just -0.75 V vs. RHE. Two properties of P4VP contribute to enhancing the activity of CoPc: (1) the ability of individual pyridine residues to coordinate to CoPc and (2) the high concentration of uncoordinated pyridine residues throughout the film which may enhance the catalytic activity of CoPc through secondary and other outer coordination sphere effects. Electrodes modified with polymer-free, five-coordinate CoPc(py) films (py = pyridine) and with CoPc catalysts immobilized in non-coordinating poly-2-vinylpyridine films were prepared to independently investigate the role that each property plays in enhancing CO2RR performance of CoPc-P4VP. These studies show that a synergistic relationship between the primary and outer coordination sphere effects is responsible for the enhanced catalytic activity of CoPc when embedded in the P4VP membrane.

Insight into the electronic effect of phosphine ligand on Rh catalyzed CO2 hydrogenation by investigating the reaction mechanism

The effect of the outer coordination sphere of the diphosphine ligand on the catalytic efficiency of [Rh(PCH₂X^RCH₂P)₂]⁺ (X^R = CH₂, N–CH₃, CF₂) catalyzed CO₂ hydrogenation was studied. It was found that the hydricity of the metal hydride bond determined the activation energy of the rate determining step of the reaction.

Photoswitching a molecular catalyst to regulate CO2 hydrogenation

Attaching azobenzene across a Rh CO₂ hydrogenation catalyst results in a complex that switches structure, controlling the rate of CO₂ hydrogenation.