Understanding Ketone Hydrodeoxygenation for the Production of Fuels and Feedstocks From Biomass

Preparation of the Ru/HZSM-5 catalyst and its catalytic performance for the 2-pentanone hydrodeoxygenation reaction

Using model compounds to explore the reaction path and suitable conditions for the hydrodeoxygenation of bio-oil.

The solvent determines the product in the hydrogenation of aromatic ketones using unligated RhCl3 as catalyst precursor

RhCl3-catalysed hydrogenation/hydrodeoxygenation of aromatic ketones produced alkylcyclohexanes in TFE and cyclohexyl alkyl alcohols in water at moderate temperatures. Rh-nanoparticles were found to be the true catalysts.

Recyclabl Metal (Ni, Fe) Cluster Designed Catalyst for Cellulose Pyrolysis to Upgrade Bio-Oil

A new recyclable catalyst for pyrolysis has been developed by combining calculations and experimental methods. In order to understand the properties of the new cluster designed catalysts, cellulose (a major component of plants) as a biomass model compound was pyrolyzed and catalyzed with different cluster designed catalysts. The NiaFeb (2 ≤ a + b ≤ 6) catalyst clusters structures were calculated by using Gaussian and Materials Studio software to determine the relationships between catalyst structure and bio-oil components, which is essential to design cluster designed catalysts that can improve bio-oil quality. GC-MS analysis of the bio-oil was used to measure the effects on the different catalyst interactions with cellulose. It was found that the NiFe cluster designed catalysts can increase the yield of bio-oil from 35.8% ± 0.9% to 41.1% ± 0.6% and change the bio-oil composition without substantially increasing the water content, while substantially decreasing the sugar concentration from 40.1% ± 1.3% to 27.5% ± 0.9% and also producing a small amount of hydrocarbon compounds. The catalyst with a high Ni ratio also had high Gibbs free energy, ΔG, likely also influencing the decrease of sugar and acid while increasing the ketone concentrations. These results indicate the theoretical calculations can enhance the design next-generation cluster designed catalysts to improve bio-oil composition based upon experiments.

Titania supported synergistic palladium single atoms and nanoparticles for room temperature ketone and aldehydes hydrogenation

Selective reduction of ketone/aldehydes to alcohols is of great importance in green chemistry and chemical engineering. Highly efficient catalysts are still demanded to work under mild conditions, especially at room temperature. Here we present a synergistic function of single-atom palladium (Pd₁) and nanoparticles (Pd_NPs) on TiO₂ for highly efficient ketone/aldehydes hydrogenation to alcohols at room temperature. Compared to simple but inferior Pd₁/TiO₂ and Pd_NPs/TiO₂ catalysts, more than twice activity enhancement is achieved with the Pd_1+NPs/TiO₂ catalyst that integrates both Pd₁ and Pd NPs on mesoporous TiO₂ supports, obtained by a simple but large-scaled spray pyrolysis route. The synergistic function of Pd₁ and Pd_NPs is assigned so that the partial Pd₁ dispersion contributes enough sites for the activation of C=O group while Pd_NPs site boosts the dissociation of H₂ molecules to H atoms. This work not only contributes a superior catalyst for ketone/aldehydes hydrogenation, but also deepens the knowledge on their hydrogenation mechanism and guides people to engineer the catalytic behaviors as needed.

Ceria Promoted Cu-Ni/SiO2 Catalyst for Selective Hydrodeoxygenation of Vanillin

A ceria (CeO2) promoted Cu-Ni bimetallic catalyst supported on SiO2 (Cu-Ni/CeO2-SiO2) was prepared and evaluated for catalytic hydrodeoxygenation (HDO) of vanillin. Silica supported monometallic Cu and Ni catalysts and bimetallic Cu-Ni catalyst (Cu/SiO2, Ni/SiO2, and Cu-Ni/SiO2), without a ceria promoter, were also synthesized and tested for the same application. The highest conversion of vanillin was achieved with the Cu-Ni/CeO2-SiO2 catalyst. Vanillyl alcohol was the sole product in the initial 2 h, followed by the formation of 2-methoxy-4-methylphenol, which was observed. Characterization of the synthesized catalysts revealed the presence of overlapping crystalline phases of CuO, NiO, and CeO2 on the Cu-Ni/CeO2-SiO2 surface. We extended our study to find out the results of using CeO2 as the support of the Cu-Ni bimetallic catalyst (Cu-Ni/CeO2). Partial incorporation of Cu and Ni cations into the ceria lattice took place, leading to the decrease of specific surface area and a concomitant compromise in the conversion. In the case of the Cu-Ni/CeO2-SiO2 catalyst, the higher conversion was accredited to the facile formation of Cu+ active centers by the synergistic interaction between Ce+4/Ce+3 and Cu+2/Cu+ redox couples and the incorporation of oxygen vacancies on the catalyst surface.

Catalytic coupling of biomass-derived aldehydes into intermediates for biofuels and materials

Catalytic upgrading of biomass-based aldehydes into chain-extended intermediates for downstream applications in biofuels, fine chemicals, and renewable materials, is reviewed.

Transition metal triflate catalyzed conversion of alcohols, ethers and esters to olefins

Herein, we report an efficient transition metal triflate catalyzed approach to convert biomass-based compounds, such as monoterpene alcohols, sugar alcohols, octyl acetate and tea tree oil, to their corresponding olefins in high yields. The reaction proceeds through C–O bond cleavage under solvent-free conditions, where the catalytic activity is determined by the oxophilicity and the Lewis acidity of the metal catalyst. In addition, we demonstrate how the oxygen containing functionality affects the formation of the olefins. Furthermore, the robustness of the used metal triflate catalysts, Fe(OTf)₃ and Hf(OTf)₄, is highlighted by their ability to convert an over 2400-fold excess of 2-octanol to octenes in high isolated yields.

In this work, we report an efficient solvent-free metal triflate catalyzed conversion of various biomass-based alcohols, ethers and esters to olefins.

The Conversion of Starch and Sugars into Branched C10 and C11 Hydrocarbons

Oligosaccharides, such as starch, cellulose, and hemicelluloses, are abundant and easily obtainable bio-derived materials that can potentially be used as precursors for fuels and chemical feedstocks. To access the pertinent molecular building blocks (i.e., 5- or 6-carbon containing sugar units) located within these biopolymers and transform them into useful fuel precursors, oligosaccharide depolymerization followed by chain extension is required. This chain extension can readily be performed via a Garcia-Gonzalez-like approach using β-diketones under mild conditions to provide fuel precursors containing an increased carbon atom content that meets fuel requirements. In a subsequent step, ring opening and hydrodeoxygenation chemistry of these species allows for the preparation of branched alkanes under relatively mild conditions. This approach can be applied to monomeric sugars (glucose and xylose), oligosaccharides (starch), and potentially to hydrolyzed dedicated energy crops to allow the conversion of real biomass into fuel type molecules.

Recyclable montmorillonite-supported thiazolium ionic liquids for high-yielding and solvent-free upgrading of furfural and 5-hydroxymethylfurfural to C10 and C12 furoins

Six Na⁺/montmorillonite (MMT) – supported thiazolium (TM) ionic liquids (ILs) have been synthesized and employed to catalyze the highly selective condensation of furfural (FF) and 5-hydroxymethylfurfural (HMF) into C₁₀ and C₁₂ furoins, respectively.