Selective Hydrogenation of Phenol Catalyzed by Palladium on High-Surface-Area Ceria at Room Temperature and Ambient Pressure

Thermally-Stable Single-Site Pd on CeO2 Catalyst for Selective Amination of Phenols to Aromatic Amines without External Hydrogen

Developing a new route to produce aromatic amines as key chemicals from renewable phenols is a benign alternative to current fossil-based routes like nitroaromatic hydrogenation, but is challenging because of the high dissociation energy of the Ar-OH bond and difficulty in controlling side reactions. Herein, an aerosolizing-pyrolysis strategy was developed to prepare high-density single-site cationic Pd species immobilized on CeO2 (Pd1/CeO2) with excellent sintering resistance. The obtained Pd1/CeO2 catalysts achieved remarkable selectivity of important aromatic amines (yield up to 76.2 %) in the phenols amination with amines without external hydrogen sources, while Pd nano-catalysts mainly afforded phenyl-ring-saturation products. The excellent catalytic properties of the Pd1/CeO2 are closely related to high-loading Pd single-site catalysts with abundant surface defect sites and suitable acid-base properties. This report provides a sustainable route for producing aromatic amines from renewable feedstocks.

Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

Solvothermal Fabrication of Mesoporous Pd Nano-Corals at Mild Temperature for Alkaline Hydrogen Evolution Reaction

Porous metallic nanomaterials exhibit interesting physical and chemical properties, and are widely used in various fields. Traditional fabrication techniques are limited to metallurgy, sintering, electrodeposition, etc., which limit the control of pore size and distribution, and make it difficult to achieve materials with high surface areas. On the other hand, the chemical preparation of metallic nanoparticles is usually carried out with strong reducing agents or at high temperature, resulting in the formation of dispersed particles which cannot evolve into porous metal. In this study, we reported the simple fabrication of coral-like mesoporous Pd nanomaterial (Pd NC) with a ligament size of 4.1 nm. The fabrication was carried out by simple solvothermal reduction at a mild temperature of 135 °C, without using any templates. The control experiments suggested that tetrabutylammonium bromide (TBAB) played a critical role in the Pd(II) reduction into Pd nanoclusters and their subsequent aggregation to form Pd NC, and another key point for the formation of Pd NC is not to use a strong reducing agent. In alkaline water electrolysis, the Pd NC outperforms the monodisperse Pd NPs and the state-of-the-art Pt (under large potentials) for H2 evolution reaction, probably due to its mesoporous structure and large surface area. This work reports a simple and novel method for producing porous metallic nanomaterials with a high utilization efficiency of metal atoms, and it is expected to contribute to the practical preparation of porous metallic nanomaterials by solvothermal reductions.

Boosting the catalytic performance of Al2O3-supported Pd catalysts by introducing CeO2 promoters

Maintaining the stability of noble metals is the key to the long-term stability of supported catalysts. In response to the instability of noble metal species at high temperatures, we developed a synergistic strategy of dual oxide supports. By designing and constructing ceria components with small sizes, we have achieved unity in the ability of catalytic materials to supply oxygen and stabilize metal species. In this study, we prepared Al2O3-CeO2-Pd (AlCePd) catalysts containing trace amounts of Ce through the hydrolysis of cerium acetate, which achieved 100% CO conversion at 160 °C. More importantly, the activity remained at its initial 100% in the long-term durability testing, demonstrating the high stability of AlCePd. In contrast, the CO conversion of the CeO2-Pd (CePd) catalyst decreased from 100% to 54% within 3 h. Through comprehensive studies, we found that this excellent catalytic performance stems from the stabilizing effect of an alumina support and the possible reverse oxygen spillover effect of small-sized ceria components, where small-sized ceria components provide active oxygen for independent Pd species, making it possible for the CO adsorbed on Pd to react with this oxygen species.

Hydrogen spillover and substrate-support hydrogen bonding mediate hydrogenation of phenol catalyzed by palladium on reducible metal oxides

Substrate-support interactions play an important role in the catalytic hydrogenation of phenolic compounds by ceria-supported palladium (Pd/CeO2). Here, we combine surface contrast solution NMR methods and reaction kinetic assays to investigate the role of substrate-support interactions in phenol (PhOH) hydrogenation catalyzed by titania-supported palladium (Pd/TiO2). We show that PhOH adsorbs on the catalyst via a weak hydrogen-bonding interaction between the -OH group of the substrate and one oxygen atom on the support. Interestingly, we observe that the addition of 20 mM inorganic phosphate results in a ∼2-fold destabilization of the PhOH-support interaction and a corresponding ∼2-fold inhibition of the catalytic reaction, suggesting an active role of the PhOH-TiO2 hydrogen bond in catalysis. A comparison of the data measured here with the results previously reported for a Pd/CeO2 catalyst indicates that the efficiency of the Pd-supported catalysts is correlated to the amount of PhOH hydrogen bonded to the metal oxide support. Since CeO2 and TiO2 have similar ability to uptake activated hydrogen from a noble metal site, these data suggest that hydrogen spillover is the main mechanism by which Pd-activated hydrogens are shuttled to the PhOH adsorbed on the surface of the support. Consistent with this hypothesis, Pd supported on a non-reducible metal oxide (silica) displays negligible hydrogenation activity. Therefore, we conclude that basic and reducible metal oxides are active supports for the efficient hydrogenation of phenolic compounds due to their ability to hydrogen bond to the substrate and mediate the addition of the activated hydrogens to the adsorbed aromatic ring.

Single-Atom Alloy Pd1Ag10/CeO2–ZrO2 as a Promising Catalyst for Selective Alkyne Hydrogenation

The effect of support on the performance of Pd1Ag10/Al2O3 and Pd1Ag10/CeO2–ZrO2 catalysts in the selective hydrogenation of diphenylacetylene (DPA) was studied. Characterization of the catalyst by DRIFTS-CO and HRTEM revealed the formation of a PdAg single-atom alloy (SAA) structure on the surface of PdAg nanoparticles, with Pd1 sites isolated by Ag atoms. It was found that the use of CeO2–ZrO2 as a carrier makes it possible to increase the activity of the Pd1Ag10 catalyst by a factor of three without loss of selectivity compared to the reference Pd1Ag10/Al2O3. According to the HRTEM data, this catalytic behavior can be explained by an increase in the dispersion of Pd1Ag10/CeO2–ZrO2 compared to its Pd1Ag10/Al2O3 counterpart. As evidenced by DRIFTS-CO data, the high selectivity of the Pd1Ag10/CeO2–ZrO2 sample presumably stems from the stability of the structure of isolated Pd1 sites on the surface of SAA Pd1Ag10/CeO2–ZrO2.

Secondary Amines from Catalytic Amination of Bio-Derived Phenolics over Pd/C and Rh/C: Effect of Operation Parameters

The production of renewable chemicals using lignocellulosic biomass has gained significant attention in green chemistry. Among biomass-derived chemicals, secondary amines have emerged as promising intermediates for synthetic applications. Here, we report a systematic study on the reductive amination of phenolics with cyclohexylamine using Pd/C and Rh/C as catalysts. The catalytic tests were performed in batch reactors under different reaction conditions (various: amine concentration (0.1–0.4 mol/L), hydrogen pressure (0–2.5 bar), temperature (80–160 °C), and substituted phenols (phenol, o-cresol, p-cresol, and methoxyphenol)) and using tert-amyl alcohol as a solvent. The experimental observations were consistent with a multi-step mechanism, where hydrogenation of phenol to cyclohexanone is followed by condensation of the ketone with cyclohexylamine to form an imine, which is finally hydrogenated to produce secondary amines. In addition, there was evidence of parallel self-condensation of the cyclohexylamine. The study also supported a limited dehydrogenation capacity of Rh/C, unlike Pd/C, which increases this capacity at higher temperatures generating a higher yield of cyclohexylaniline (up to 15%). The study of the alkylated phenols demonstrated that the nature and propensity of hydrogenation of the phenolic controls their amination. Kinetic analysis revealed reaction orders between 0.4 and 0.7 for H2, indicating its dissociative adsorption. Meanwhile, phenol’s order (between 1–1.8) suggests a single participation of this compound in the hydrogenation step. The order of 0.4 for cyclohexylamine suggests its participation as a surface-abundant species. The apparent activation energies derived from a power law approximation were of 37 kJ/mol and 10 kJ/mol on Pd/C and Rh/C, respectively.

Highly Active Bimetallic Single-Atom Alloy PdAg Catalysts on Cerium-Containing Supports in the Hydrogenation of Alkynes to Alkenes

Abstract

A study of a series of single-atom-alloy catalysts Pd1Ag3/Al2O3, Pd1Ag3/CeO2–Al2O3, and Pd1Ag3/CeO2–ZrO2 in the selective hydrogenation of diphenylacetylene (DPA) showed a significant (five-fold) increase in activity for the PdAg3/CeO2–ZrO2 sample in comparison with that of Pd1Ag3/Al2O3. It was especially noted that the increase in activity was not accompanied by a decrease in the selectivity for the target product. This catalytic behavior can be explained by two factors: (1) a more than twofold increase in the dispersity of the PdAg3/CeO2–ZrO2 catalyst and (2) a change in the electronic state of the nanoparticles, as determined from the results of an IR-spectroscopic study of adsorbed CO. The retention of the high selectivity of the synthesized catalysts indicated the stability of the structure of Pd1 monoatomic sites in the catalysts prepared by deposition on Ce-containing supports, which was also confirmed by the IR spectroscopy of adsorbed CO. The experimental results indicate that Ce-containing supports are promising for the synthesis of catalysts for the selective hydrogenation of substituted alkynes.

Solution NMR methods for structural and thermodynamic investigation of nanoparticle adsorption equilibria

Characterization of dynamic processes occurring at the nanoparticle (NP) surface is crucial for developing new and more efficient NP catalysts and materials. Thus, a vast amount of research has been dedicated to developing techniques to characterize sorption equilibria. Over recent years, solution NMR spectroscopy has emerged as a preferred tool for investigating ligand-NP interactions. Indeed, due to its ability to probe exchange dynamics over a wide range of timescales with atomic resolution, solution NMR can provide structural, kinetic, and thermodynamic information on sorption equilibria involving multiple adsorbed species and intermediate states. In this contribution, we review solution NMR methods for characterizing ligand-NP interactions, and provide examples of practical applications using these methods as standalone techniques. In addition, we illustrate how the integrated analysis of several NMR datasets was employed to elucidate the role played by support-substrate interactions in mediating the phenol hydrogenation reaction catalyzed by ceria-supported Pd nanoparticles.

Unique catalytic mechanisms of methanol dehydrogenation at Pd-doped ceria: A DFT+U study

Pd-doped ceria is highly active in promoting oxidative dehydrogenation (ODH) reactions and also a model single atom catalyst (SAC). By performing density functional theory calculations corrected by on-site Coulomb interactions, we systematically studied the physicochemical properties of the Pd-doped CeO₂(111) surface and the catalytic methanol to formaldehyde reaction on the surface. Two different configurations were located for the Pd dopant, and the calculated results showed that doping of Pd will make the surface more active with lower oxygen vacancy formation energies than the pristine CeO₂(111). Moreover, two different pathways for the dehydrogenation of CH₃OH to HCHO on the Pd-doped CeO₂(111) were determined, one of which is the conventional two-step process (stepwise pathway) with the O-H bond of CH₃OH being broken first followed by the C-H bond cleavage, while the other is a novel one-step process (concerted pathway) involving the two H being dissociated from CH₃OH simultaneously even with a lower energy barrier than the stepwise one. With electronic and structural analyses, we showed that the direct reduction of Pd⁴⁺ to Pd²⁺ through the transfer of two electrons can outperform the separated Ce⁴⁺ to Ce³⁺ processes with the help of configurational evolution at the Pd site, which is responsible for the existence of such one-step dehydrogenation process. This novel mechanism may provide an inspiration for constructing ceria-based SAC with unique ODH activities.

Reaction Rate Acceleration of Cooperative Catalytic Systems: Metal Nanoparticles and Lewis Acids in Arene Hydrogenation

Employing two distinct catalysts in one reaction medium synergistically is a powerful strategy for activating less reactive substrates. Although the approach has been well-developed in homogeneous conditions, it remains challenging and rare in heterogeneous catalysis, especially under gas-liquid-solid multiphase reaction conditions. Here, we describe the development of cooperative and synergistic catalyst systems of heterogeneous Rh-Pt bimetallic nanoparticle catalysts, Rh-Pt/DMPSi-Al₂ O₃ , and Sc(OTf)₃ in the liquid phase for the hydrogenation of arenes under very mild conditions. Dramatic rate acceleration was achieved with cooperative activation. Remarkably, more challenging substrates that contained strong electron-donating groups and sterically hindered substituents were smoothly hydrogenated. Mechanistic insights into the cooperative activation of an aromatic substrate by heterogeneous metal nanoparticles and a soluble Lewis acid was obtained by kinetic studies and by direct observation of ¹ H and ⁴⁵ Sc NMR spectra.

Reductive amination of phenol over Pd-based catalysts: elucidating the role of the support and metal nanoparticle size

The Pd-catalyzed reductive amination of phenol is sensitive to the support's nature, and to the atoms' coordination in palladium clusters.

Hydrogenation of phenol to cyclohexanol using carbon encapsulated Ni–Co alloy nanoparticles

Highly active NiCo alloy nanoparticles for phenol hydrogenation to cyclohexanol were developed.

Catalytic Pyrolysis of Lignin Model Compound (Ferulic Acid) over Alumina: Surface Complexes, Kinetics, and Mechanisms

Studies of the thermochemical properties of the important model compound of lignin-ferulic acid (FA) and its surface complexes are substantial for developing technologies for catalytic pyrolysis of renewable biomass into biofuels and lignin-derived chemicals as well as for bio-oil upgrading. In this work, the catalytic pyrolysis of ferulic acid over alumina was studied by temperature-programmed desorption mass spectrometry (TPD MS), in situ FT-IR spectroscopy, thermogravimetric analysis, and DFT calculations. We established that both the carboxyl group and the active groups (HO and CH3O) of the aromatic ring interact with the alumina surface. We calculated the kinetic parameters of formation of the main products of catalytic pyrolysis: 4-vinylguaiacol, guaiacol, hydroxybenzene, benzene, toluene, cresol, naphthalene, and PACs. Possible methods of their forming from the related surface complexes of FA are suggested.

Recent progress on selective hydrogenation of phenol toward cyclohexanone or cyclohexanol

Phenol is considered as an important platform molecule for synthesizing value-added chemical intermediates and products. To date, various strategies for phenol transformation have been developed, and among them, selective hydrogenation of phenol toward cyclohexanone (K), cyclohexanol (A) or the mixture KA oil has been attracted great interest because they are both the key raw materials for the synthesis of nylon 6 and 66, as well as many other chemical products, including polyamides. However, until now it is still challengeable to realize the industrilized application of phenol hydrogenation toward KA oils. To better understand the selective hydrogenation of phenol and fabricate the enabled nanocatalysts, it is necessary to summarize the recent progress on selective hydrogenation of phenol with different catalysts. In this review, we first summarize the selective hydrogenation of phenol toward cyclohexanone or cyclohexanol by different nanocatalysts, and simultaneously discuss the relationship among the active components, type of supports and their performances. Then, the possible reaction mechanism of phenol hydrogenation with the typical metal nanocatalysts is summarized. Subsequently, the possible ways for scale-up hydrogenation of phenol are discussed. Finally, the potential challenges and future developments of metal nanocatalysts for the selective hydrogenation of phenol are proposed.

Promoted catalytic hydrodechlorination for deep degradation of chlorophenols over Rh-La/SiO2 catalyst

Deep degradation of chlorophenols (CPs) into safe and ecofriendly cyclohexanol during catalytic hydrodechlorination (HDC), shows important practical significance and attractive prospect in the treatment of wastewater containing chlorophenols. An efficient Rh-La/SiO₂ catalyst was developed, by employing La as promoter. The presence of La in catalyst promoted catalytic performance of HDC significantly. Characterization results revealed that the interaction occurred between Rh and La in Rh-La/SiO₂ catalyst. This interaction accompanied with the high dispersion and finely particle size of active Rh, and generation of abundant Rh sites neighboring La atom. Kinetic study illustrated that Rh-La(1:1)/SiO₂ catalyst possessed the fastest kinetic constants, and minimized the apparent activation energies of 4-CP, phenol and cyclohexanone greatly. Complete degradation of 4-CP with a very high yield of cyclohexanol (> 98%) can be achieved at room temperature, making Rh-La(1:1)/SiO₂ catalyst to be a promising candidate for deep degradation of CPs during HDC and other Rh catalyzed hydrogenation reactions.

Catalytic Pyrolysis of Lignin Model Compounds (Pyrocatechol, Guaiacol, Vanillic and Ferulic Acids) over Nanoceria Catalyst for Biomass Conversion

Understanding the mechanisms of thermal transformations of model lignin compounds (MLC) over nanoscale catalysts is important for improving the technologic processes occurring in the pyrolytic conversion of lignocellulose biomass into biofuels and value-added chemicals. Herein, we investigate catalytic pyrolysis of MLC (pyrocatechol (P), guaiacol (G), ferulic (FA), and vanillic acids (VA)) over nanoceria using FT-IR spectroscopy, temperature-programmed desorption mass spectrometry (TPD MS), and thermogravimetric analysis (DTG/DTA/TG). FT-IR spectroscopic studies indicate that the active groups of aromatic rings of P, G, VA, and FA as well as carboxylate groups of VA and FA are involved in the interaction with nanoceria surface. We explore the general transformation mechanisms of different surface complexes and identify their decomposition products. We demonstrate that decomposition of carboxylate acid complexes occurs by decarboxylation. When FA is used as a precursor, this reaction generates 4-vinylguaiacol. Complexes of VA and FA formed through both active groups of the aromatic ring and decompose on the CeO2 surface to generate hydroxybenzene. The formation of alkylated products accompanies catalytic pyrolysis of acids due to processes of transalkylation on the surface.

Selective and leaching-resistant palladium catalyst on a porous polymer support for phenol hydrogenation

Selective hydrogenation of phenol is promising for the utilization of renewable lignocellulose and production of cyclohexanone that usually relies on petroleum, but it is challenging to simultaneously achieve high activity and selectivity. Herein, we report an amino-functionalized nanoporous polymer stabilized palladium nanoparticle catalyst, which is prepared via a one-pot co-polymerization method, as highly active and selective catalysts for the phenol hydrogenation, giving cyclohexanone selectivity over 99.5% with full conversion of phenol under mild reaction conditions without any soluble additives. Importantly, the palladium leaching was efficiently hindered, maintaining the catalytic performances in continuously recycle tests. In contrast, the commercial palladium catalysts exhibit much lower selectivity and obvious deactivation because of the palladium leaching.

Diastereoselective Rhodium-Catalyzed Hydrogenation of 2-Oxindoles and 3,4-Dihydroquinolones

The benzene ring of indolin-2-ones (2-oxindoles) and 3,4-dihydroquinol-2-ones was converted to a saturated cyclohexane ring by hydrogenation in the presence of the rhodium complex ^Cy(CAAC)Rh(cod)Cl. The stereoselectivity of the process was found to be high with respect to both external substituent R¹ within the saturated part of the heterocyclic ring and substituent X on the benzene ring. Twenty-one hexahydroindolin-2(3H)-ones (70-99% yield, dr = 83/17 to >99/1) and twelve octahydro-2(1H)-quinolinones (87-96% yield, dr = 64/36 to >99/1) were obtained with the major diastereoisomer exhibiting the hydrogen atoms in an all-cis arrangement. The high tolerance toward functional groups and the compatibility with existing stereogenic centers are key features of the hydrogenation protocol presented here.

An organogel library for solution NMR analysis of nanoparticle suspensions in non-aqueous samples

Surface contrast solution NMR methods (scNMR) are emerging as powerful tools to investigate the adsorption of small molecule ligands to the surface of nanoparticles (NP), returning fundamental insight into the kinetics and thermodynamics of sorption, as well as structural information on the adsorbed species. A prerequisite for the acquisition of high quality solution NMR data is the preparation of homogeneous and stable samples that return consistent NMR spectra and allow extensive signal averaging. Unfortunately, this condition does not apply to NMR samples containing NPs that often show a tendency to sediment and accumulate at the bottom of the NMR tube over the course of the experiment. We have recently shown that preparing NMR samples in an agarose gel matrix inhibits sedimentation and allows the characterization of small molecule-NP interactions by scNMR. Unfortunately, as the agarose gel only forms in aqueous solution, this sample preparation method cannot be used to stabilize NP suspensions in a non-aqueous environment. Here, we introduce a library of 48 organogels, based on low molecular-mass organic gelators (LMOGs), to prepare NMR samples of small molecule/NP systems in a wide range of organic solvents. In addition, we present a simple method that takes advantage of ¹H transverse relaxation (¹H-R₂) measurements to screen the library and identify the best gelator to characterize the small molecule-NP interaction of interest in the solvent of choice. We expect the results of this study will enable the preparation of homogeneous and stable samples of NPs in non-aqueous environments, therefore dramatically increasing the applicability of scNMR to the characterization of heterogeneous interactions and to the investigation of the role played by solvent molecules in regulating the kinetics and thermodynamics of sorption.

trans-Selective and Switchable Arene Hydrogenation of Phenol Derivatives

A trans-selective arene hydrogenation of abundant phenol derivatives catalyzed by a commercially available heterogeneous palladium catalyst is reported. The described method tolerates a variety of functional groups and provides access to a broad scope of trans-configurated cyclohexanols as potential building blocks for life sciences and beyond in a one-step procedure. The transformation is strategically important because arene hydrogenation preferentially delivers the opposite cis-isomers. The diastereoselectivity of the phenol hydrogenation can be switched to the cis-isomers by employing rhodium-based catalysts. Moreover, a protocol for the chemoselective hydrogenation of phenols to cyclohexanones was developed.

Synthesis of novel chemicals from cardanol as a product of cashew nutshell processing

The conversion of the worldwide chemical production from fossil to sustainable resources is currently one of the most urgent tasks for the chemical industry. Based on this approach cardanol, a mixture of phenols with C15-chains as substituents is produced in some countries of the tropical zone from the processing of cashew nutshells. The paper reports the specific transformation of the aromatic moiety in this cheap material, and thus, the development of a novel route to potential useful green bifunctional chemicals in gram scale. Accordingly, cardanol was converted successfully in three steps into hexane-1,6-diols. The evaluation of appropriate synthesis methods and suitable conditions for each of these reaction steps is presented as an essential topic of these investigations. The target compounds synthesized in the reaction sequence are potential building blocks for future biomass-based chemicals and monomers for green polymeric materials, surfactants, and lubricants.

Efficient activation of Pd/CeO2 catalyst by non-thermal plasma for complete oxidation of indoor formaldehyde at room temperature

Formaldehyde is a typical indoor air pollutant and its removal is essential to protect human health and meet environmental regulations. Efficient activation of Pd/CeO₂ catalyst by non-thermal plasma was investigated to achieve complete oxidation of formaldehyde at room temperature. The catalyst exhibited better activity and stability than conventional thermal reduced sample. Its HCHO conversion to CO₂ kept at over 80% during 300 min test at a gas hourly space velocity of 150, 000 mL/g/h and HCHO concentration of 100 ppm. While the conversion dropped from 70% to 50% within 300 min test for the sample reduced at 300 °C. Compared with thermal reduced catalyst, plasma reduced sample exhibited more abundant surface active oxygen species, smaller palladium particle size and narrower particle size distribution. Moreover, palladium particles were partial covered by ceria layer for thermal reduced sample. Although strong interaction between palladium and ceria could be formed, the loss of metallic palladium occurs and hence the oxygen activation and mobility abilities are blocked. In situ DRIFTs results suggested that the intermediates over Pd/CeO₂ catalyst were mainly formate, dioxymethylene and polyoxymethylene species, and the formate oxidation into CO₂ process was highly promoted in the presence of water.