Base-Free Oxidation of Alcohols to Esters at Room Temperature and Atmospheric Conditions using Nanoscale Co-Based Catalysts

Synthesis and Characterization of MOF-Derived Structures: Recent Advances and Future Perspectives

Due to their facile tunability, metal-organic frameworks (MOFs) are employed as precursors and templates to construct advanced functional materials with unique and desired chemical, physical, mechanical, and morphological properties. By tuning MOF precursor composition and manipulating conversion processes, various MOF-derived materials commonly known as MOF derivatives can be constructed. The possibility of controlled and predictable properties makes MOF derivatives a preferred choice for numerous advanced technological applications. The innovative synthetic designs besides the plethora of interdisciplinary characterization approaches applicable to MOF derivatives provide the opportunity to perform a myriad of experiments to explore the performance and offer key insight to develop the next generation of advanced materials. Though there are many published works of literature describing various synthesis and characterization techniques of MOF derivatives, it is still not clear how the synthesis mechanism works and what are the best techniques to characterize these materials to probe their properties accurately. In this review, the recent development in synthesis techniques and mechanisms for a variety of MOF derivates such as MOF-derived metal oxides, porous carbon, composites/hybrids, and sulfides is summarized. Furthermore, the details of characterization techniques and fundamental working principles are summarized to probe the structural, mechanical, physiochemical, electrochemical, and electronic properties of MOF and MOF derivatives. The future trends and some remaining challenges in the synthesis and characterization of MOF derivatives are also discussed.

Thermally activated structural phase transitions and processes in metal-organic frameworks

The structural knowledge of metal-organic frameworks is crucial to the understanding and development of new efficient materials for industrial implementation. This review classifies and discusses recent advanced literature reports on phase transitions that occur during thermal treatments on metal-organic frameworks and their characterisation. Thermally activated phase transitions and procceses are classified according to the temperaturatures at which they occur: high temperature (reversible and non-reversible) and low temperature. In addition, theoretical calculations and modelling approaches employed to better understand these structural phase transitions are also reviewed.

Ni, Co-Embedded MOF-Derived N-Doped Bimetallic Porous Carbon for Adsorption-Photocatalytic Degradation of Organic Dyes and Antibiotics

An efficient protocol for photocatalytic degradation of organic dyes and antibiotics has been successfully established via MOF-derived (MOF = metal-organic framework) Ni, Co-embedded N-doped bimetallic porous carbon nanocomposites (NiCo/NC). Such a NiCo/NC nanocomposite features well-distributed structures, suitable specific surface areas, and more active sites determined by various characterization analyses. The catalyst exhibits higher photocatalytic performance and stability toward the liquid-phase degradation of methylene blue (MB) under visible light irradiation for 60 min, after the adsorption-desorption equilibrium and the thorough degradation into H2O and CO2. Radical quenching experiments further confirmed the dominant effect of electron holes h+ and superoxide radical anions ·O2- for the MB photodegradation process. NiCo/NC was also appropriate for the degradation of Rhodamine B, methyl orange, tetracycline hydrochloride, and norfloxacin. Moreover, NiCo/NC is robust, and its photocatalytic activity is basically maintained after 8 cycles. This work is expected to provide additional information for the design of MOF-derived carbon material with more excellent properties and lay the foundation for further industrial applications.

Ni3+ -Rich Ni/NiOx @C Nanocapsules Below 4 nm Constructed by Low-Temperature Graphitization of Self-Assembled Few-Layer Coordination Polymers toward Efficient Alkaline Hydrogen Evolution Electrocatalysis

Low-cost and eco-friendly Ni/NiO heterojunctions have been theoretically proven to be the ideal candidate for stepwise electrocatalysis of alkaline hydrogen evolution reaction, attributed to the preferred OHad adsorption by incompletely filled d orbitals of NiO phase and favorable Had adsorption energy of Ni phase. Nevertheless, most Ni/NiO compounds reported so far fail to exhibit excellent catalytic activity, possibly due to the lack of efficient electron transport, limited interfacial active sites, and unregulated Nin+ ratios. To address the above bottlenecks, herein, the ultrasmall Ni/NiOx @C nanocapsules (<5 nm) are directly constructed by graphitization of four-layer Ni-based coordination polymers at record low temperatures of 400 °C. Ascribed to the accelerated electron and mass transfer by the carbon nano-onions coated around Ni/NiOx heterojunctions, the extreme rise in interfaces and Ni3+ defects with t6 2ge1 g electronic configuration owed to the ultrasmall size, the Ni/NiOx @C nanocapsules exhibit the highest catalytic activity and the lowest overpotential of η10 = 80 mV among various Ni/NiO materials (measured on the glassy carbon electrode). This work not only constructs an industrialized high-efficiency electrocatalyst toward alkaline HER, but also provides a novel strategy for the constant-scale preparation of multicomponent transition metals-based nanocrystals below 4 nm.

Cobalt Encapsulated in Nitrogen-Doped Graphite-like Shells as Efficient Catalyst for Selective Oxidation of Arylalkanes

Selective oxidation of ethylbenzene to acetophenne is an important process in both organic synthesis and fine chemicals diligence. The cobalt-based catalysts combined with nitrogen-doped carbon have received great attention in ethylbenzene (EB) oxidation. Here, a series of cobalt catalysts with metallic cobalt nanoparticles (NPs) encapsulated in nitrogen-doped graphite-like carbon shells (Co@NC) have been constructed through the one-pot pyrolysis method in the presence of different nitrogen-containing compounds (urea, dicyandiamide and melamine), and their catalytic performance in solvent-free oxidation of EB with tert-butyl hydrogen peroxide (TBHP) as an oxidant was investigated. Under optimized conditions, the UCo@NC (urea as nitrogen source) could afford 95.2% conversion of EB and 96.0% selectivity to acetophenone, and the substrate scalability was remarkable. Kinetics show that UCo@NC contributes to EB oxidation with an apparent activation energy of 32.3 kJ/mol. The synergistic effect between metallic cobalt NPs and nitrogen-doped graphite-like carbon layers was obviously observed and, especially, the graphitic N species plays a key role during the oxidation reaction. The structure-performance relationship illustrated that EB oxidation was a free radical reaction through 1-phenylethanol as an intermediate, and the possible reaction mechanistic has been proposed.

Cobalt nanoparticles-catalyzed aerobic oxygenation and esterification of alkynes via C≡C bonds cleavage

An unprecedented efficient protocol is developed for the oxidative cleavage of C≡C bonds in alkynes to produce structure-diverse esters using heterogeneous cobalt nanoparticles as catalyst with molecular oxygen as the oxidant. A diverse set of mono- and multisubstituted aromatic and aliphatic alkynes can be effectively cleaved and converted into the corresponding esters. Characterization analysis and control experiments indicate high surface area and pore volume, as well as nanostructured nitrogen-doped graphene-layer coated cobalt nanoparticles are possibly responsible for excellent catalytic activity. Mechanistic studies reveal that ketones derived from alkynes under oxidative conditions are formed as intermediates, which subsequently are converted to esters through a tandem sequential process. The catalyst can be recycled up to five times without significant loss of activity.

New Insights into N-Doped Porous Carbons as Both Heterogeneous Catalysts and Catalyst Supports: Opportunities for the Catalytic Synthesis of Valuable Compounds

Among the vast class of porous carbon materials, N-doped porous carbons have emerged as promising materials in catalysis due to their unique properties. The introduction of nitrogen into the carbonaceous matrix can lead to the creation of new sites on the carbon surface, often associated with pyridinic or pyrrolic nitrogen functionalities, which can facilitate various catalytic reactions with increased selectivity. Furthermore, the presence of N dopants exerts a significant influence on the properties of the supported metal or metal oxide nanoparticles, including the metal dispersion, interactions between the metal and support, and stability of the metal nanoparticles. These effects play a crucial role in enhancing the catalytic performance of the N-doped carbon-supported catalysts. Thus, N-doped carbons and metals supported on N-doped carbons have been revealed to be interesting heterogeneous catalysts for relevant synthesis processes of valuable compounds. This review presents a concise overview of various methods employed to produce N-doped porous carbons with distinct structures, starting from diverse precursors, and showcases their potential in various catalytic processes, particularly in fine chemical synthesis.

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. This Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

Opportunities from Metal Organic Frameworks to Develop Porous Carbons Catalysts Involved in Fine Chemical Synthesis

In the last decade, MOFs have been proposed as precursors of functional porous carbons with enhanced catalytic performances by comparison with other traditional carbonaceous catalysts. This area is rapidly growing mainly because of the great structural diversity of MOFs offering almost infinite possibilities. MOFs can be considered as ideal platforms to prepare porous carbons with highly dispersed metallic species or even single-metal atoms under strictly controlled thermal conditions. This review briefly summarizes synthetic strategies to prepare MOFs and MOF-derived porous carbons. The main focus relies on the application of the MOF-derived porous carbons to fine chemical synthesis. Among the most explored reactions, the oxidation and reduction reactions are highlighted, although some examples of coupling and multicomponent reactions are also presented. However, the application of this type of catalyst in the green synthesis of biologically active heterocyclic compounds through cascade reactions is still a challenge.

Electro-Synthesis of Organic Compounds with Heterogeneous Catalysis

Electro-organic synthesis has attracted a lot of attention in pharmaceutical science, medicinal chemistry, and future industrial applications in energy storage and conversion. To date, there has not been a detailed review on electro-organic synthesis with the strategy of heterogeneous catalysis. In this review, the most recent advances in synthesizing value-added chemicals by heterogeneous catalysis are summarized. An overview of electrocatalytic oxidation and reduction processes as well as paired electrocatalysis is provided, and the anodic oxidation of alcohols (monohydric and polyhydric), aldehydes, and amines are discussed. This review also provides in-depth insight into the cathodic reduction of carboxylates, carbon dioxide, CC, C≡C, and reductive coupling reactions. Moreover, the electrocatalytic paired electro-synthesis methods, including parallel paired, sequential divergent paired, and convergent paired electrolysis, are summarized. Additionally, the strategies developed to achieve high electrosynthesis efficiency and the associated challenges are also addressed. It is believed that electro-organic synthesis is a promising direction of organic electrochemistry, offering numerous opportunities to develop new organic reaction methods.

Enhanced Adsorption-Photocatalytic Degradation of Organic Pollutants via a ZIF-67-Derived Co-N Codoped Carbon Matrix Catalyst

Stable and efficient photocatalytic degradation of organic pollutants has been achieved via a ZIF-67-derived Co-embedded N-doped nanoporous carbon material catalyst (Co-N/C). The catalyst features a well-distributed structure, suitable specific surface area, and more active sites according to the various characterization analyses. The photocatalytic activity of Co-N/C was evaluated by the degradation of the target pollutant Rhodamine B (RhB). As a result, RhB could establish an adsorption-desorption equilibrium in the dark within 30 min and was thoroughly degraded into H2O and CO2 by Co-N/C under 500 W visible light irradiation in 40 min. Moreover, radical-quenching experiments and reactive oxygen species monitoring were performed to further probe the plausible photodegradation mechanism of RhB. Co-N/C is also appropriate for other alternative dyes and antibiotics affording ideal removal efficiencies. After the reaction, Co-N/C could be facilely separated by an external magnetic field and reused for eight reaction cycles without obvious deactivation of its photocatalytic properties. This study is expected to provide an instructive guideline for the design of efficient and recyclable composite photocatalysts derived from metal-organic frameworks for a broad range of environmental remediation processes.

Solvent-Free Hydrogenation of 5-Hydroxymethylfurfural and Furfural to Furanyl Alcohols and their Self-Condensation Polymers

2,5-Bis(hydroxymethyl)furan (BHMF) as well as furfuryl alcohol (FFA) are considered as highly valuable biomass-derived alcohols resembling aromatic monomers in polymer synthesis. Herein, a series of cobaltic nitrogen-doped carbon (Co-NC) catalysts calcinated at different temperatures were synthesized and tested for the solvent-free hydrogenation of 5-hydroxymethylfurfural (HMF) to prepare BHMF. It was found that the Co-NC catalyst calcinated at 600 °C (Co-NC-600) exhibited a superior catalytic activity in the hydrogenation reaction mainly due to the doping of graphitic N, which probably facilitated the polarization of H₂ to afford H⁺ and H^- . Consequently, Co-NC-600 offered a high BHMF/FFA yield greater than 90 % with a nearly complete conversion of HMF/furfural (FF) at the optimal conditions (80 °C, 4 h, and 5 MPa H₂ ). After the hydrogenation reaction, Co-NC catalyst was facilely recycled by magnetic separation, and the obtained BHMF/FFA was then successfully transformed into hypercrosslinked polymers with an excellent CO₂ /H₂ storage capacity comparable to aromatic hydroxymethyl polymers. Therefore, this is a novel and facile two-step pathway for the conversion of biomass-derived HMF/FF towards functional polymers from both industrial and environmental perspectives.

Controllable Assembly of Vanadium-Containing Polyoxoniobate-Based Materials and Their Electrocatalytic Activity for Selective Benzyl Alcohol Oxidation

During the controllable synthesis of two vanadium-containing Keggin-type polyoxoniobates (PONbs), [Ni(en)₂]₅[PNb₁₂O₄₀(VO)₅](OH)₅·18H₂O (1) and [Ni(en)₃]₅[PNb₁₂O₄₀(VO)₂]∙17H₂O (2, en = ethylenediamine) are realized by changing the vanadium source and hydrothermal temperature. Compounds 1 and 2 have been thoroughly characterized by single-crystal X-ray diffraction analysis, FT-IR spectra, X-ray photoelectron spectrum (XPS), powder X-ray diffraction (PXRD), etc. Compound 1 contains a penta-capped Keggin-type polyoxoniobate {PNb₁₂O₄₀(VO)₅}, which is connected by adjacent [Ni(en)₂]²⁺ units into a three-dimensional (3D) organic-inorganic framework, representing the first nickel complexes connected vanadoniobate-based 3D material. Compound 2 is a discrete di-capped Keggin-type polyoxoniobate {PNb₁₂O₄₀(VO)₂} with [Ni(en)₃]²⁺ units as counter cations. Compounds 1 and 2 have poor solubility in common solvents and can keep stable in the pH range of 4 to 14. Notably, both 1 and 2 as electrode materials are active for the selective oxidation of benzyl alcohol to benzaldehyde. Under ambient conditions without adding an alkaline additive, compound 1 as a noble metal free electrocatalyst can achieve 92% conversion of benzyl alcohol, giving a Faraday efficiency of 93%; comparatively, 2 converted 79% of the substrate with a Faraday efficiency of 84%. The control experiments indicate that both the alkaline polyoxoniobate cluster and the capped vanadium atoms play an important role during the electrocatalytic oxidation process.

Metal Embedded Porous Carbon for Efficient CO2 Cycloaddition under Mild Conditions

Nitrogen-doped porous carbon material was generated via thermal pyrolysis of zeolitic imidazole frameworks (ZIFs). The structure of the ZIF templates was tuned, so that the obtained product was an N-doped porous carbon-containing encapsulated metal nanoparticle. The hierarchical structural and unique properties of pyrolyzed materials are involved in further application, including catalysis. The as-synthesized porous carbon materials were applied as a catalyst for CO2 fixation on cyclic carbonates under near ambient pressure without solvent and co-catalyst. The zinc dispersion in highly porous carbon material, deriving from ZIF-8, exhibited a superior catalytic performance among the synthesized materials. The acid sites (Zn species) and the incorporated basic sites (N-species) present in the porous carbon material are essential for a high affinity for gas adsorption and CO2 conversion. Additionally, the catalyst was found to be very robust and stable during recycling studies as the catalytic performance remained high for seven cycles.

Efficient iron single-atom catalysts for selective ammoxidation of alcohols to nitriles

Zeolitic imidazolate frameworks derived Fe₁-N-C catalysts with isolated single iron atoms have been synthesized and applied for selective ammoxidation reactions. For the preparation of the different Fe-based materials, benzylamine as an additive proved to be essential to tune the morphology and size of ZIFs resulting in uniform and smaller particles, which allow stable atomically dispersed Fe-N₄ active sites. The optimal catalyst Fe₁-N-C achieves an efficient synthesis of various aryl, heterocyclic, allylic, and aliphatic nitriles from alcohols in water under very mild conditions. With its chemoselectivity, recyclability, high efficiency under mild conditions this new system complements the toolbox of catalysts for nitrile synthesis, which are important intermediates with many applications in life sciences and industry.

1T-Phase molybdenum sulfide/cobalt oxide nanopillars hybrid nanostructure coupled with nitrogen-doped carbon thin-film as high efficiency electrocatalyst for oxygen evolution

High efficient and durable catalysts are always needed to lower the kinetic barriers as well as prolong the service life associated with oxygen evolution reaction (OER). Herein, a sequential synthetic strategy is considered to prepare a hierarchical nanostructure, in which each component can be configured to achieve their full potential so that endows the resulting nanocatalyst a good overall performance. In order to realize this, well-organized cobalt oxide (Co₃O₄) nanopillars are firstly grown onto ultrathin 1T-molybdenum sulfide (1T-MoS₂) to obtain high surface area electrocatalyst, providing electron transfer pathways and structural stability. After that, zeolitic imidazolate framework-67 (ZIF-67) derived carbonization film is further in situ deposited on the surface of nanopillars to generate plentiful active sites, thereby accelerating OER kinetics. Based on the combination of different components, the electron transfer capability, catalytic activity and durability are optimized and fully implemented. The obtained nanocatalyst (defined as 1T-MoS₂/Co₃O₄/CN) exhibits the superior OER catalytic ability with the overpotential of 202 mV and Tafel slope of 57 mV·dec^-1 at 10 mA·cm^-2 in 0.1 M KOH, and good durability with a minor chronoamperometric decay of 9.15 % after 60,000 s of polarization.

Metal–Organic Frameworks (MOFs) and Materials Derived from MOFs as Catalysts for the Development of Green Processes

This review will be centered around the work that has been reported on the development of metal–organic frameworks (MOFs) serving as catalysts for the conversion of carbon dioxide into short-chain hydrocarbons and the generation of clean energies starting from biomass. MOFs have mainly been used as support for catalysts or to prepare catalysts derived from MOFs (as sacrifice template), obtaining interesting results in the hydrogenation or oxidation of biomass. They have presented a good performance in the hydrogenation of CO2 into light hydrocarbon fuels. The common patterns to be considered in the performance of the catalysts are the acidity of MOFs, metal nodes, surface area and the dispersion of the active sites, and these parameters will be discussed in this review.

Sustainable aerobic oxidative coupling of thiols and amines for selective formation of sulfenamides using MOF-derived cobalt nanoparticles supported on N-doped carbon

A heterogeneous catalyst system has been developed for the aerobic oxidative coupling of thiols with amines for the selective formation of various sulfenamides with ZIF-67-derived cobalt-based N-doped carbon catalysts.

ZIF-Derived Metal/N-Doped Porous Carbon Nanocomposites: Efficient Catalysts for Organic Transformations

Recently, zeolitic imidazolate framework (ZIF)-derived metal/N-doped porous carbon nanocomposites (M@NCs) have emerged as a class of appealing heterogeneous catalysts applied in organic synthesis, and the striking features mainly involve low-cost...

Nanoparticles and single atoms of cobalt synergistically enabled low-temperature reductive amination of carbonyl compounds

Low-temperature and selective reductive amination of carbonyl compounds is a highly promising approach to access primary amines. However, it remains a great challenge to conduct this attractive route efficiently over earth-abundant metal-based catalysts. Herein, we designed several Co-based catalysts (denoted as Co@C–N(x), where x represents the pyrolysis temperature) by the pyrolysis of the metal–organic framework ZIF-67 at different temperatures. Very interestingly, the prepared Co@C–N(800) could efficiently catalyze the reductive amination of various aldehydes/ketones to synthesize the corresponding primary amines with high yields at 35 °C. Besides non-noble metal and mild temperature, the other unique advantage of the catalyst was that the substrates with different reduction-sensitive groups could be converted into primary amines selectively because the Co-based catalyst was not active for these groups at low temperature. Systematic analysis revealed that the catalyst was composed of graphene encapsulated Co nanoparticles and atomically dispersed Co–N_x sites. The Co particles promoted the hydrogenation step, while the Co–N_x sites acted as acidic sites to activate the intermediate (Schiff base). The synergistic effect of metallic Co particles and Co–N_x sites is crucial for the excellent performance of the catalyst Co@C–N(800). To the best of our knowledge, this is the first study on efficient synthesis of primary amines via reductive amination of carbonyl compounds over earth-abundant metal-based catalysts at low temperature (35 °C).

An earth-abundant Co-based catalyst, Co@C–N(800), could efficiently catalyze the reductive amination of carbonyl compounds into primary amines at 35 °C owing to the synergistic effect of Co nanoparticles and atomically dispersed Co–N_x sites.

Hydrogenation of phenol to cyclohexanol using carbon encapsulated Ni–Co alloy nanoparticles

Highly active NiCo alloy nanoparticles for phenol hydrogenation to cyclohexanol were developed.

Hydrogen-Catalyzed Acid Transformation for the Hydration of Alkenes and Epoxy Alkanes over Co-N Frustrated Lewis Pair Surfaces

Hydrogen (H₂) is widely used as a reductant for many hydrogenation reactions; however, it has not been recognized as a catalyst for the acid transformation of active sites on solid surface. Here, we report the H₂-promoted hydration of alkenes (such as styrenes and cyclic alkenes) and epoxy alkanes over single-atom Co-dispersed nitrogen-doped carbon (Co-NC) via a transformation mechanism of acid-base sites. Specifically, the specific catalytic activity and selectivity of Co-NC are superior to those of classical solid acids (acidic zeolites and resins) per micromole of acid, whereas the hydration catalysis does not take place under a nitrogen atmosphere. Detailed investigations indicate that H₂ can be heterolyzed on the Co-N bond to form H^δ--Co-N-H^δ+ and then be converted into OH^δ--Co-N-H^δ+ accompanied by H₂ generation via a H₂O-mediated path, which significantly reduces the activation energy for hydration reactions. This work not only provides a novel catalytic method for hydration reactions but also removes the conceptual barriers between hydrogenation and acid catalysis.

Ethanol Dehydrogenation to Acetaldehyde over Co@N-Doped Carbon

Cobalt and nitrogen co-doped carbon materials (Co@CN) have recently attracted significant attention as highly efficient noble-metal-free catalysts exhibiting a large application range. In a similar research interest, and taking into account the ever-increasing importance of bioethanol as a renewable raw material, here, we report the results on ethanol dehydrogenation to acetaldehyde over Co@NC catalysts. The catalyst samples were synthesized by a variety of affordable techniques, ensuring generation of various types of Co species incorporated in carbon, such as subnanosized cobalt sites and nano-sized particles of metallic cobalt and cobalt oxides. The catalytic activity was tested under both oxidative and non-oxidative gas-phase conditions at 200–450 °C using a fixed-bed flow reactor. The non-oxidative conditions proved to be much more preferable for the target reaction, competing, however, with ethanol dehydration to ethylene. Under specified reaction conditions, ethanol conversion achieved a level of 66% with 84% selectivity to acetaldehyde at 400 °C. The presence of molecular oxygen in the feed led mainly to deep oxidation of ethanol to COx, giving acetaldehyde in a comparatively low yield. The potential contribution of carbon itself and supported cobalt forms to the observed reaction pathways is discussed.

Base-free catalytic aerobic oxidation of mercaptans over MOF-derived Co/CN catalyst with controllable composition and structure

The oxidation of mercaptans under mild and base-free conditions is of vital importance in terms of economy and environment for petroleum processing industry. Here, we developed a series of MOF-derived cobalt-based nitrogen-doped (N-doped) carbon (Co/CN-x) catalysts for the base-free catalytic oxidation of mercaptans. The optimal Co/CN-900 showed excellent catalytic activity for the oxidation of mercaptans under base-free conditions, yielding complete conversion of various mercaptans and > 99.0% selectivity of disulfides. The high performance can be contributed to the advantages of hierarchical pore structure for the diffusion and migration of substrates, self-carrying alkalinity for the formation of mercaptide anion, abundant active Co sites for catalytic oxidation of mercaptans as well as the synergistic effects between the Co nanoparticles (NPs) and N-doped carbon supports. Furthermore, a possible mechanism for base-free catalytic oxidation of mercaptans over Co/CN-x catalysts is proposed based on a set of control experiments and density functional theory (DFT) calculations.

Nitrogen-Doped Carbon Composites with Ordered Macropores and Hollow Walls

Metal-organic frameworks provide versatile templates for the fabrication of various metal/carbon materials, but most of the derived composites possess only microspores, limiting the accessibility of embedded active sites. Herein, we report the construction of cobalt/nitrogen-doped carbon composites with a three-dimensional (3D) ordered macroporous and hollow-wall structure (H-3DOM-Co/NC) using a single-crystal ordered macropore (SOM)-ZIF-8@ZIF-67 as precursor. During the pyrolysis, the interconnected macroporous structure of SOM-ZIF-8@ZIF-67 is mostly preserved, whereas the pore wall achieves a solid-to-hollow transformation with Co nanoparticles formed in the hollow walls. The 3D-ordered macroporous carbon skeleton may effectively promote long-range mass transfer and the hollow wall can facilitate local accessibility of active sites. This unique structure can greatly boost its catalytic activity in the selective hydrogenation of biomass-derived furfural to cyclopentanol, much superior to its counterparts without this well-designed hierarchically porous structure.

Aerobic oxidation and oxidative esterification of alcohols through cooperative catalysis under metal-free conditions

The ABNO@PMO-IL-Br material obtained by anchoring 9-azabicyclo[3.3.1]nonane-3-one N-oxyl (keto-ABNO) within the mesopores of periodic mesoporous organosilica with bridged imidazolium groups is a robust bifunctional catalyst for the metal-free aerobic oxidation of numerous primary and secondary alcohols under oxygen balloon reaction conditions. The catalyst, furthermore, can be successfully employed in the first metal-free self-esterification of primary aliphatic alcohols affording valued esters.

Metal organic framework-templated fabrication of exposed surface defect-enriched Co3O4 catalysts for efficient toluene oxidation

Exposed surface defect-enriched Co₃O₄ catalysts derived from metal organic framework (MOF) were fabricated by the promotion of surface Mn species for toluene oxidation. The incorporation of Mn species into Co₃O₄ surface lattice could give rise to the local lattice distortion in spinel structure, resulting in highly exposed surface defect rather than bulk defect. More Co³⁺ species were also exposed on the surface of MnO_x/Co₃O₄ samples owing to the electron transfer from Co to Mn species by the occupation of surface Mn in octahedral Co³⁺ sites. Accordingly, the low-temperature reducibility and high mobility of lattice oxygen were significantly improved in virtue of the highly exposed surface defect and predominately surface Co³⁺ sites, thus promoting the catalytic activity and stability for toluene oxidation. Moreover, the toluene conversion decreased with the increase of weight hourly space velocity (WHSV). In situ DRIFTS results confirmed the continuous oxidation process for toluene degradation, and the conversion of benzoate into maleic anhydride should be the rate-controlling step.

A Multifunctional Au/CeO2-Mg(OH)2 Catalyst for One-Pot Aerobic Oxidative Esterification of Aldehydes with Alcohols to Alkyl Esters

Au nanoparticles bound to crystalline CeO2 nanograins that were dispersed on the nanoplate-like Mg(OH)2, denoted as Au/CeO2-Mg(OH)2, were developed as the highly active and selective multifunctional heterogeneous catalyst for direct oxidative esterification of aldehydes with alcohols to produce alkyl esters under base-free aerobic conditions using oxygen or air as the green oxidants. Au/CeO2-Mg(OH)2 converted 93.3% of methacrylaldehyde (MACR) to methyl methacrylate (MMA, monomer of poly(methyl methacrylate)) with 98.2% selectivity within 1 h, and was repeatedly used over eight recycle runs without regeneration. The catalyst was extensively applied to other aldehydes and alcohols to produce desirable alkyl esters. Comprehensive characterization analyses revealed that the strong metal-support interaction (SMSI) among the three catalytic components (Au, CeO2, and Mg(OH)2), and the proximity and strong contact between Au/CeO2 and the Mg(OH)2 surface were prominent factors that accelerated the reaction toward a desirable oxidative esterification pathway. During the reaction, MACR was adsorbed on the surface of CeO2-Mg(OH)2, upon which methanol was simultaneously activated for esterifying the adsorbed MACR. Hemiacetal-form intermediate species were subsequently produced and oxidized to MMA on the surface of the electron-rich Au nanoparticles bound to partially reduced CeO2-x with electron-donating properties. The present study provides new insights into the design of SMSI-induced supported-metal-nanoparticles for the development of novel, multifunctional, and heterogeneous catalysts.

Hierarchical CeO2@N-C Ultrathin Nanosheets for Efficient Selective Oxidation of Benzylic Alcohols in Water

A monodisperse CeO₂@N-C ultrathin nanosheet self-assembled hierarchical structure (USHR) has been prepared by metal-organic framework template methods. The uniform coating of nitrogen-doped carbon (N-C) layers could play an important role in the adsorption and activation of benzylic alcohol. The unique 3D hierarchical structure self-assembled by ultrathin nanosheets provided enough active sites for the catalytic reaction. Therefore, the CeO₂@N-C USHR can afford excellent catalytic performance for selective oxidation of benzylic alcohols in water.

Engineering of mono-dispersed mesoporous TiO2 over 1-D nanorods for water purification under visible light irradiation

Herein we synthesized a novel structure of mesoporous TiO₂ decorated on 1D ZnO nanorods for environmental remediation. The effect of mesoporous TiO₂ over 1D nanorods were investigated. The phase transitions of nanocomposite were confirmed by powder diffraction analysis. The morphological investigation of synthesized TiO₂/ZnO catalyst revealed that the TiO₂ are in porous in nature which covered the surface of 1D nanorods. The size of mesoporous TiO₂ nanoparticles was about 10-15 nm. The chemical composition and elemental mapping results clearly evident that the presence of ZnO and TiO₂ is distributed uniformly on ZnO nanorods. TiO₂/ZnO nanocomposite shows enhanced activity which degrades in 14 min under visible light irradiation. TiO₂/ZnO catalyst with 5 wt % exhibited the high photocatalytic activity (0.1882 min^-1). It is proposed that a synergistic interaction between ZnO and TiO₂ leads to a charge separation which leads to the enhanced activity.

CoPd Nanoalloys with Metal-Organic Framework as Template for Both N-Doped Carbon and Cobalt Precursor: Efficient and Robust Catalysts for Hydrogenation Reactions

In this work, a series of metal-organic framework (MOF)-derived CoPd nanoalloys have been prepared. The nanocatalysts exhibited excellent activities in the hydrogenation of nitroarenes and alkenes in green solvent (ethanol/water) under mild conditions (H₂ balloon, room temperature). Using ZIF-67 as template for both carbon matrix and cobalt precursor coating with a mesoporous SiO₂ layer, the catalyst CoPd/NC@SiO₂ was smoothly constructed. Catalytic results revealed a synergistic effect between Co and Pd components in the hydrogenation process due to the enhanced electron density. The mesoporous SiO₂ shell effectively prevented the sintering of hollow carbon and metal NPs at high temperature, furnishing the well-dispersed nanoalloy catalysts and better catalytic performance. Moreover, the catalyst was durable and showed negligible activity decay in recycling and scale-up experiments, providing a mild and highly efficient way to access amines and arenes.

PCl3-mediated transesterification and aminolysis of tert-butyl esters via acid chloride formation

A PCl3-mediated conversion of tert-butyl esters into esters and amides in one-pot under air is developed. This novel protocol is highlighted by the synthesis of skeletons of bioactive molecules and gram-scale reactions. Mechanistic studies revealed that this transformation involves the formation of an acid chloride in situ, which is followed by reactions with alcohols or amines to afford the desired products.