Photoelectrochemical Generation of Hydrogen from Water Using a CdSe Quantum Dot-Sensitized Photocathode

Design of MOF-Derived NiO-Carbon Nanohybrids Photocathodes Sensitized with Quantum Dots for Solar Hydrogen Production

Nickel oxide (NiO) is a promising p-type material for a wide range of optoelectronic devices, as well as photocathode for photoelectrochemical (PEC) water splitting. However, traditional NiO photoelectrodes exhibit a wide bandgap (3.6 eV), intrinsic poor electrical conductivity, and low surface area, leading to low PEC systems performance. Herein, the authors explore a Ni-based metal-organic framework (MOF) template method to obtain hierarchical hollow spheres of carbon/NiO nanostructure by successive carbonization and oxidation treatments. After sensitization with core and core-shell quantum dots (QDs), the optimized NiO-photocathode exhibits a maximum current density of -93.6 µA cm^-2 at 0 V versus RHE (reversible hydrogen electrode) in neutral pH (6.8) and -285 µA cm^-2 at -0.4 V versus RHE. Compared to pure NiO and single-core CdSe QDs, a 2.2-fold increase in photocurrent can be obtained. The improvement in the performance of this hybrid is not only due to the high surface area for loading QDs and light scattering, but also to the presence of a highly conductive carbon matrix that promotes fast charge transfer. The proposed MOFs-based NiO/carbon photocathode sensitized with QDs can be an effective strategy to improve the efficiency of metal oxide-based PEC systems for hydrogen generation.

Photoelectrochemical hydrogen evolution using CdTexS1-x quantum dots as sensitizers on NiO photocathodes

The design of active photocathodes for the hydrogen evolution reaction (HER) is a crucial step in the development of dye-sensitized photoelectrochemical cells (DS-PECs) aimed at solar-assisted water splitting. In the present work, we report on the use of orange CdTexS1-x quantum dots (QDs) with an average diameter of ca. 3.5 nm, featuring different capping agents (MAA, MPA, and MSA) for the sensitization of electrodes based on nanostructured NiO. Photoelectrochemical characterization of the resulting NiO|QDs electrodes in the presence of [CoIII(NH3)5Cl]Cl2 as an irreversible electron acceptor elects MAA-capped QDs as the most active sample to achieve substantial photocurrent densities thanks to both improved surface coverage and injection ability. Functionalization of the NiO|QDs electrodes with either heterogeneous Pt or the molecular nickel bis(diphosphine) complex (1) as the hydrogen evolving catalysts (HECs) yields active photocathodes capable of promoting hydrogen evolution upon photoirradiation (maximum photocurrent densities of -16(±2) and -20(±1) μA·cm-2 for Pt and 1 HECs, respectively, at 0 V vs. NHE, 70-80% faradaic efficiency, maximum IPCE of ca. 0.2%). The photoelectrochemical activity is limited by the small surface concentration of the QD sensitizers on the NiO surface and the competitive light absorption by the NiO material which suggests that the match between dye adsorption and the available surface area is critical to achieving efficient hydrogen evolution by thiol-capped QDs.

Antigen down format photoelectrochemical analysis supported by fullerene functionalized Sn3O4

Herein, a smart competitive-type photoelectrochemical (PEC) sensor based on an antigen-down (Ag-down) format for procalcitonin (PCT) detection is proposed. A fullerene sensitized flower-like Sn₃O₄ nano-structure is used as the photoactive platform, and FeS₂ is labeled on the secondary antibody as a signal adjusting element. The sensor exhibits excellent sensitivity and great stability.

Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction

As one of the most critical approaches to resolve the energy crisis and environmental concerns, carbon dioxide (CO₂ ) photoreduction into value-added chemicals and solar fuels (for example, CO, HCOOH, CH₃ OH, CH₄ ) has attracted more and more attention. In nature, photosynthetic organisms effectively convert CO₂ and H₂ O to carbohydrates and oxygen (O₂ ) using sunlight, which has inspired the development of low-cost, stable, and effective artificial photocatalysts for CO₂ photoreduction. Due to their low cost, facile synthesis, excellent light harvesting, multiple exciton generation, feasible charge-carrier regulation, and abundant surface sites, semiconductor quantum dots (QDs) have recently been identified as one of the most promising materials for establishing highly efficient artificial photosystems. Recent advances in CO₂ photoreduction using semiconductor QDs are highlighted. First, the unique photophysical and structural properties of semiconductor QDs, which enable their versatile applications in solar energy conversion, are analyzed. Recent applications of QDs in photocatalytic CO₂ reduction are then introduced in three categories: binary II-VI semiconductor QDs (e.g., CdSe, CdS, and ZnSe), ternary I-III-VI semiconductor QDs (e.g., CuInS₂ and CuAlS₂ ), and perovskite-type QDs (e.g., CsPbBr₃ , CH₃ NH₃ PbBr₃ , and Cs₂ AgBiBr₆ ). Finally, the challenges and prospects in solar CO₂ reduction with QDs in the future are discussed.

Electrochemical and Photoelectrochemical Properties of Nickel Oxide (NiO) With Nanostructured Morphology for Photoconversion Applications

The cost-effective production of chemicals in electrolytic cells and the conversion of the radiation energy into electrical energy in photoelectrochemical cells (PECs) require the use of electrodes with large surface area, which possess either electrocatalytic or photoelectrocatalytic properties. In this context nanostructured semiconductors are electrodic materials of great relevance because of the possibility of varying their photoelectrocatalytic properties in a controlled fashion via doping, dye-sensitization or modification of the conditions of deposition. Among semiconductors for electrolysers and PECs the class of the transition metal oxides (TMOs) with a particular focus on NiO interests for the chemical-physical inertness in ambient conditions and the intrinsic electroactivity in the solid state. The latter aspect implies the existence of capacitive properties in TMO and NiO electrodes which thus act as charge storage systems. After a comparative analysis of the (photo)electrochemical properties of nanostructured TMO electrodes in the configuration of thin film the use of NiO and analogs for the specific applications of water photoelectrolysis and, secondly, photoelectrochemical conversion of carbon dioxide will be discussed.

A heavy metal-free CuInS2 quantum dot sensitized NiO photocathode with a Re molecular catalyst for photoelectrochemical CO2 reduction

Heavy metal-free CuInS₂ QDs as a photosensitizer and a Re molecular catalyst have been successfully employed to co-sensitize a NiO photocathode for CO₂ reduction into CO.

Interface Engineering of Colloidal CdSe Quantum Dot Thin Films as Acid-Stable Photocathodes for Solar-Driven Hydrogen Evolution

Colloidal semiconductor quantum dot (CQD)-based photocathodes for solar-driven hydrogen evolution have attracted significant attention because of their tunable size, nanostructured morphology, crystalline orientation, and band gap. Here, we report a thin film heterojunction photocathode composed of organic PEDOT:PSS as a hole transport layer, CdSe CQDs as a semiconductor light absorber, and conformal Pt layer deposited by atomic layer deposition (ALD) serving as both a passivation layer and cocatalyst for hydrogen evolution. In neutral aqueous solution, a PEDOT:PSS/CdSe/Pt heterogeneous photocathode with 200 cycles of ALD Pt produces a photocurrent density of -1.08 mA/cm² (AM-1.5G, 100 mW/cm²) at a potential of 0 V versus reversible hydrogen electrode (RHE) ( j₀) in neutral aqueous solution, which is nearly 12 times that of the pristine CdSe photocathode. This composite photocathode shows an onset potential for water reduction at +0.46 V versus RHE and long-term stability with negligible degradation. In the acidic electrolyte (pH = 1), where the hydrogen evolution reaction is more favorable but stability is limited because of photocorrosion, a thicker Pt film (300 cycles) is shown to greatly improve the device stability and a j₀ of -2.14 mA/cm² is obtained with only 8.3% activity degradation after 6 h, compared with 80% degradation under the same conditions when the less conformal electrodeposition method is used to deposit the Pt layer. Electrochemical impedance spectroscopy and time-resolved photoluminescence results indicate that these enhancements stem from a lower bulk charge recombination rate, higher interfacial charge-transfer rate, and faster reaction kinetics. We believe that these interface engineering strategies can be extended to other colloidal semiconductors to construct more efficient and stable heterogeneous photoelectrodes for solar fuel production.

Recent Advances in Sensitized Photocathodes: From Molecular Dyes to Semiconducting Quantum Dots

The increasing demand for sustainable and environmentally benign energy has stimulated intense research to establish highly efficient photo-electrochemical (PEC) cells for direct solar-to-fuel conversion via water splitting. Light absorption, as the initial step of the catalytic process, is regarded as the foundation of establishing highly efficient PEC systems. To make full use of visible light, sensitization on photoelectrodes using either molecular dyes or semiconducting quantum dots provides a promising method. In this field, however, there remain many fundamental issues to be solved, which need in-depth study. Here, fundamental knowledge of PEC systems is introduced to enable readers a better understanding of this field. Then, the development history and current state in both molecular dye- and quantum dot-sensitized photocathodes for PEC water splitting are discussed. A systematical comparison between the two systems has been made. Special emphasis is placed on the research of quantum dot-sensitized photocathodes, which have shown superiority in both efficiency and durability towards PEC water splitting at the present stage. Finally, the opportunities and challenges in the future for sensitized PEC water-splitting systems are proposed.

ITO nanoparticle film as a hole-selective layer for PbS-sensitized photocathodes

This study opened a new door to fabricate semiconductor sensitized photocathodes using ITO as the holes transfer layer.

Ultrafine ZnO quantum dot-modified TiO2 composite photocatalysts: the role of the quantum size effect in heterojunction-enhanced photocatalytic hydrogen evolution

The role of the quantum size effect in heterojunction-enhanced photocatalytic hydrogen evolution was investigated in the ultrafine ZnO QD-modified TiO₂ nanowire model.

Electrocatalytic Metal-Organic Frameworks for Energy Applications

With the global energy demand expected to increase drastically over the next several decades, the development of a sustainable energy system to meet this increase is paramount. Renewable energy sources can be coupled with electrochemical conversion processes to store energy in chemical bonds. To promote these difficult transformations, electrocatalysts that operate at high conversion rates and efficiency are required. Metal-organic frameworks (MOFs) have emerged as a promising class of materials; however, the insulating nature of MOFs has limited their application as electrocatalysts. The recent development of conductive MOFs has led to several electrocatalytic MOFs that display activity comparable to that of the best-performing heterogeneous catalysts. Although many electrocatalytic MOFs exhibit low activity and stability, the few successful examples highlight the possibility of MOF electrocatalysts as replacements for noble-metal-based catalysts in commercial energy-converting devices. We review herein the use of pristine MOFs as electrocatalysts to facilitate important energy-related reactions.

Size dependence of efficiency of PbS quantum dots in NiO-based dye sensitised solar cells and mechanistic charge transfer investigation

Quantum dots (QDs) are very attractive materials for solar cells due to their high absorption coefficients, size dependence and easy tunability of their optical and electronic properties due to quantum confinement. Particularly interesting are PbS QDs owing to their broad spectral absorption until long wavelengths, their easy processability and low cost. Here, we used control of the PbS QD size to understand charge transfer processes at the interfaces of a NiO semiconductor and explain the optimal QD size in photovoltaic devices. Towards this goal, we have synthesized a series of PbS QDs with different diameters (2.8 nm to 4 nm) and investigated charge transfer dynamics by time resolved spectroscopy and their ability to act as sensitizers in nanocrystalline NiO based solar cells using the cobalt tris(4,4'-ditert-butyl-2,2'-bipyridine) complex as a redox mediator. We found that PbS QDs with an average diameter of 3.0 nm show the highest performance in terms of efficient charge transfer and light harvesting efficiency. Our study showed that hole injection from the PbS QDs to the NiO valence band (VB) is an efficient process even with low injection driving force (-0.3 eV) and occurs in 6-10 ns. Furthermore we found that direct electrolyte reduction (photoinduced electron transfer to the cobalt redox mediator) also occurs in parallel to the hole injection with a rate constant of similar magnitude (10-20 ns). In spite of its large driving force, the rate constant of the oxidative quenching of PbS by Co(iii) diminishes more steeply than hole injection on NiO when the diameter of PbS increases. This is understood as the consequence of increasing the trap states that limit electron shift. We believe that our detailed findings will advance the future design of QD sensitized photocathodes.

Semiconductor quantum dot-sensitized rainbow photocathode for effective photoelectrochemical hydrogen generation

The present study reports the fabrication of CdSe quantum dot (QD)-sensitized photocathodes on NiO-coated indium tin oxide (ITO) electrodes and their H₂-generating ability upon light irradiation. A well-established spin-coating method was used to deposit CdSe QD stock solution onto the surface of NiO/ITO electrodes, thereby leading to the construction of various CdSe QD-sensitized photocathodes. The present report includes the construction of rainbow photocathodes by spin-coating different-sized QDs in a sequentially layered manner, thereby creating an energetically favorable gradient for charge separation. The resulting rainbow photocathodes with forward energetic gradient for charge separation and subsequent electron transfer to a solution-based hydrogen-evolving catalyst (HEC) exhibit good light-harvesting ability and enhanced photoresponses compared with the reverse rainbow photocathodes under white LED light illumination. Under minimally optimized conditions, a photocurrent density of as high as 115 μA⋅cm^-2 and a Faradaic efficiency of 99.5% are achieved, which is among the most effective QD-based photocathode water-splitting systems.

Catalytic Light-Driven Generation of Hydrogen from Water by Iron Dithiolene Complexes

The development of active, robust systems for light-driven hydrogen production from aqueous protons based on catalysts and light absorbers composed solely of earth abundant elements remains a challenge in the development of an artificial photosynthetic system for water splitting. Herein, we report the synthesis and characterization of four closely related Fe bis(benzenedithiolate) complexes that exhibit catalytic activity for hydrogen evolution when employed in systems with water-soluble CdSe QDs as photosensitizer and ascorbic acid as a sacrificial electron source under visible light irradiation (520 nm). The complex with the most electron-donating dithiolene ligand exhibits the highest activity, the overall order of activity correlating with the reduction potential of the formally Fe(III) dimeric dianions. Detailed studies of the effect of different capping agents and the extent of surface coverage of these capping agents on the CdSe QD surfaces reveal that they affect system activity and provide insight into the continued development of such systems containing QD light absorbers and molecular catalysts for H2 formation.

Electronic Processes within Quantum Dot-Molecule Complexes

The subject of this review is the colloidal quantum dot (QD) and specifically the interaction of the QD with proximate molecules. It covers various functions of these molecules, including (i) ligands for the QDs, coupled electronically or vibrationally to localized surface states or to the delocalized states of the QD core, (ii) energy or electron donors or acceptors for the QDs, and (iii) structural components of QD assemblies that dictate QD-QD or QD-molecule interactions. Research on interactions of ligands with colloidal QDs has revealed that ligands determine not only the excited state dynamics of the QD but also, in some cases, its ground state electronic structure. Specifically, the article discusses (i) measurement of the electronic structure of colloidal QDs and the influence of their surface chemistry, in particular, dipolar ligands and exciton-delocalizing ligands, on their electronic energies; (ii) the role of molecules in interfacial electron and energy transfer processes involving QDs, including electron-to-vibrational energy transfer and the use of the ligand shell of a QD as a semipermeable membrane that gates its redox activity; and (iii) a particular application of colloidal QDs, photoredox catalysis, which exploits the combination of the electronic structure of the QD core and the chemistry at its surface to use the energy of the QD excited state to drive chemical reactions.

Infra-red photoresponse of mesoscopic NiO-based solar cells sensitized with PbS quantum dot

Sensitized NiO based photocathode is a new field of investigation with increasing scientific interest in relation with the development of tandem dye-sensitized solar cells (photovoltaic) and dye-sensitized photoelectrosynthetic cells (solar fuel). We demonstrate herein that PbS quantum dots (QDs) represent promising inorganic sensitizers for NiO-based quantum dot-sensitized solar cells (QDSSCs). The solar cell sensitized with PbS quantum dot exhibits significantly higher photoconversion efficiency than solar cells sensitized with a classical and efficient molecular sensitizer (P1 dye = 4-(Bis-{4-[5-(2,2-dicyano-vinyl)-thiophene-2-yl]-phenyl}-amino)-benzoic acid). Furthermore, the system features an IPCE (Incident Photon-to-Current Efficiency) spectrum that spreads into the infra-red region, reaching operating wavelengths of 950 nm. The QDSSC photoelectrochemical device works with the complexes tris(4,4′-ditert-butyl-2,2′-bipyridine)cobalt(III/II) redox mediators, underscoring the formation of a long-lived charge-separated state. The electrochemical impedance spectrocopy measurements are consistent with a high packing of the QDs upon the NiO surface, the high density of which limits the access of the electrolyte and results in favorable light absorption cross-sections and a significant hole lifetime. These notable results highlight the potential of NiO-based photocathodes sensitized with quantum dots for accessing and exploiting the low-energy part of the solar spectrum in photovoltaic and photocatalysis applications.

Hole-Accepting-Ligand-Modified CdSe QDs for Dramatic Enhancement of Photocatalytic and Photoelectrochemical Hydrogen Evolution by Solar Energy

Solar H2 evolution of CdSe QDs can be significantly enhanced simply by introducing a suitable hole-accepting-ligand for achieving efficient hole extraction and transfer at the nanoscale interfaces, which opens an effective pathway for dissociation of excitons to generate long-lived charge separation, thus improving the solar-to-fuel conversion efficiency.

1D ZnO/BiVO4 heterojunction photoanodes for efficient photoelectrochemical water splitting

In this paper, a novel ZnO nanorods (NRs)/BiVO₄ heterojunction has been successfully prepared as a photoanode for photoelectrochemical (PEC) water splitting.

General applicability of nanocrystalline Ni2P as a noble-metal-free cocatalyst to boost photocatalytic hydrogen generation

The Ni₂P cocatalyst can boost hydrogen generation over TiO₂, CdS, and C₃N₄ photocatalysts, which demonstrates its good catalytic property and general applicability.

A novel g-C3N4 based photocathode for photoelectrochemical hydrogen evolution

Novel and stable g-C₃N₄ based photocathode was designed and prepared with excellent activity for PEC hydrogen production without external co-catalyst.

Surface Properties and Photocatalytic Activities of the Colloidal ZnS:Mn Nanocrystals Prepared at Various pH Conditions

Water-dispersible ZnS:Mn nanocrystals (NC) were synthesized by capping the surface with mercaptoacetic acid (MAA) molecules at three different pH conditions. The obtained ZnS:Mn-MAA NC products were physically and optically characterized by corresponding spectroscopic methods. The UV-Visible absorption spectra and PL emission spectra showed broad peaks at 310 and 590 nm, respectively. The average particle sizes measured from the HR-TEM images were 5 nm, which were also supported by the Debye-Scherrer calculations using the X-ray diffraction (XRD) data. Moreover, the surface charges and the degrees of aggregation of the ZnS:Mn-MAA NCs were determined by electrophoretic and hydrodynamic light scattering methods, indicating formation of agglomerates in water with various sizes (50–440 nm) and different surface charge values accordingly the preparation conditions of the NCs (−7.59 to −24.98 mV). Finally, the relative photocatalytic activities of the ZnS:Mn-MAA NCs were evaluated by measuring the degradation rate of methylene blue (MB) molecule in a pseudo first-order reaction condition under the UV-visible light irradiation. As a result, the ZnS:Mn-MAA NC prepared at the pH 7 showed the best photo-degradation efficiency of the MB molecule with the first-order rate constant (k_obs) of 2.0 × 10⁻³·min⁻¹.