Diagnosis and quantification of glycerol assimilating denitrifying bacteria in an integrated fixed-film activated sludge reactor via 13C DNA stable-isotope probing

Comparing methanol and glycerol as carbon sources for mainstream partial denitrification/anammox in an IFAS process

This study explored the implementation of mainstream partial denitrification with anammox (PdNA) in the second anoxic zone of a wastewater treatment process in an integrated fixed film activated sludge (IFAS) configuration. A pilot study was conducted to compare the use of methanol and glycerol as external carbon sources for an IFAS PdNA startup, with a goal to optimize nitrogen removal while minimizing carbon usage. The study also investigated the establishment of anammox bacteria on virgin carriers in IFAS reactors without the use of seeding, and it is the first IFAS PdNA startup to use methanol as an external carbon source. The establishment of anammox bacteria was confirmed in both reactors 102 days after startup. Although the glycerol-fed reactor achieved a higher steady-state maximum ammonia removal rate because of anammox bacteria (1.6 ± 0.3 g/m2/day) in comparison with the methanol-fed reactor (1.2 ± 0.2 g/m2/day), both the glycerol- and methanol-fed reactors achieved similar average in situ ammonia removal rates of 0.39 ± 0.2 g/m2/day and 0.40 ± 0.2 g/m2/day, respectively. Additionally, when the upstream ammonia versus NOx (AvN) control system maintained an ideal ratio of 0.40-0.50 g/g, the methanol-fed reactor attained a lower average effluent TIN concentration (3.50 ± 1.2 mg/L) than the glycerol-fed reactor (4.43 ± 1.6 mg/L), which was prone to elevated nitrite concentrations in the effluent. Overall, this research highlights the potential for PdNA in IFAS configurations as an efficient and cost-saving method for wastewater treatment, with methanol as a viable carbon source for the establishment of anammox bacteria. PRACTITIONER POINTS: Methanol is an effective external carbon source for an anammox startup that avoids the need for costly alternative carbon sources. The methanol-fed reactor demonstrated higher TIN removal compared with the glycerol-fed reactor because of less overproduction of nitrite. Anammox bacteria was established in an IFAS reactor without seeding and used internally stored carbon to reduce external carbon addition. Controlling the influent ammonia versus NOx (AvN) ratio between 0.40 and 0.50 g/g allowed for low and stable TIN effluent conditions.

Discovery of a novel potential polyphosphate accumulating organism without denitrifying phosphorus uptake function in an enhanced biological phosphorus removal process

Enhanced biological phosphorus removal (EBPR) is an effective process for phosphorus removal from wastewater. In this study, two lab-scale sequencing batch reactors (SBR) were used to perform EBPR process, in which genus Propioniciclava was unexpectedly accumulated and its relative abundance was over 70 %. A series of tests were conducted to explore the role of Propioniciclava in the two EBPR systems. The two systems performed steadily throughout the study, and the phosphorus removal efficiencies were 96.6 % and 93.5 % for SBR1 and SBR2, respectively. The stoichiometric analysis related to polyphosphate accumulating organisms (PAOs) indicated that polyphosphate accumulating metabolism (PAM) was achieved in the anaerobic phase. It appeared that the Propioniciclava-dominated systems could not perform denitrifying phosphorus removal. Instead, phosphorus was released under anoxic conditions without carbon sources. According to the genomic information from Integrated Microbial Genomes (IMG) database, Propioniciclava owns ppk1, ppk2 and ppx genes that are associated with phosphorus release and uptake functions. By phylogenetic investigation of communities by reconstruction of unobserved states 2 (PICRUSt2) analysis, the abundance of genes related to phosphorus metabolism was much higher than that of genes related to denitrification. Therefore, Propioniciclava was presumed to be a potential PAO without denitrifying phosphorus uptake function. In addition to Propioniciclava, Tessaracoccus and Thiothrix were also enriched in both systems. Overall, this study proposes a novel potential PAO and broadens the understanding of EBPR microbial communities.

Carbon source shaped microbial ecology, metabolism and performance in denitrification systems

The limited information on microbial interactions and metabolic patterns in denitrification systems, especially those fed with different carbon sources, has hindered the establishment of ecological linkages between microscale connections and macroscopic reactor performance. In this work, denitrification performance, metabolic patterns, and ecological structure were investigated in parallel well-controlled bioreactors with four representative carbon sources, i.e., methanol, glycerol, acetate, and glucose. After long-term acclimation, significant differences were observed among the four bioreactors in terms of denitrification rates, organic utilization, and heterotrophic bacterial yields. Different carbon sources induced the succession of denitrifying microbiota toward different ecological structures and exhibited distinct metabolic patterns. Methanol-fed reactors showed distinctive microbial carbon utilization pathways and a more intricate microbial interaction network, leading to significant variations in organic utilization and metabolite production compared to other carbon sources. Three keystone taxa belonging to the Verrucomicrobiota phylum, SJA-15 order and the Kineosphaera genus appeared as network hubs in the methanol, glycerol, and acetate-fed systems, playing essential roles in their ecological functions. Several highly connected species were also identified within the glucose-fed system. The close relationship between microbial metabolites, ecological structures, and system performances suggests that this complex network relationship may greatly contribute to the efficient operation of bioreactors.

Impacts of organics on the microbial ecology of wastewater anammox processes: Recent advances and meta-analysis

Anaerobic ammonium oxidation (anammox) represents a promising technology for wastewater nitrogen removal. Organics management is critical to achieving efficient and stable performance of anammox or integrated processes, e.g., denitratation-anammox. The aim of this systematic review is to synthesize the state-of-the-art knowledge on the multifaceted impacts of organics on wastewater anammox community structure and function. Both exogenous and endogenous organics are discussed with respect to their effects on the biofilm/granule structure and function, as well as the interactions between anammox bacteria (AnAOB) and a broad range of coexisting functional groups. A global core community consisting of 19 taxa is identified and a co-occurrence network is constructed by meta-analysis on the 16S rDNA sequences of 149 wastewater anammox samples. Correlations between core taxa, keystone taxa, and environmental factors, including COD, nitrogen loading rate (NLR) and C/N ratio are obtained. This review provides a holistic understanding of the microbial responses to different origins and types of organics in wastewater anammox reactors, which will facilitate the design and operation of more efficient anammox-based wastewater nitrogen removal process.

Achieving efficient nitrite accumulation in glycerol-driven partial denitrification system: Insights of influencing factors, shift of microbial community and metabolic function

Partial denitrification (PD), which could provide sufficient nitrite for subsequent anaerobic ammonium oxidation, is a novel strategy for mainstream nitrogen removal. In this study, the performance of using glycerol as electron donor for nitrite accumulation in PD process was evaluated. Results showed that a C/N of 4.5 was effective for nitrite production (average nitrite accumulation rate: 34.32 mg N h^-1 gMLVSS^-1; average nitrate-to-nitrite transformation ratio (NTR): 91.1%) with pH ranging from 6.0 to 9.0. Also, a stable nitrite accumulation was achieved in long-term operation with the average NTR of 80.1%. Mechanism investigation found that the denitrifying bacteria Saccharibacteria (77.9%) was enriched in glycerol-driven reactors. Moreover, the enzymatic activity as well as the encoding genes (i.e. narG, narH and napA) involved in nitrate reduction were much higher than that for nitrite reduction (i.e. nirK), and this disparity was responsible for the efficient nitrite accumulation in glycerol-driven PD system.

Metagenomic evidence reveals denitrifying community diversity rather than abundance drives nitrate removal in stormwater biofilters amended with different organic and inorganic electron donors

Various sole and mixed electron donors were tested to promote the denitrification rate and nitrate removal efficiency in biofilter systems with high phosphate and ammonia removal efficiency (92.6% and 95.3% respectively). Compared to sole electron donors, complex organic carbon (bits of wood and straw) substantially improved the denitrification rate and nitrate removal efficiency (from 6.3%-18.5% to35.4%) by shifting the denitrifying microbial community composition, even though the relative abundance of functional genes mediating denitrification decreased. The mixed electron donor combining complex organic carbon with sulfur, iron and CH₄ further promoted nitrate removal efficiency by 37.2%. The significantly higher abundance and diversity of bacteria mediating organic carbon decomposition in the treatments with complex organic carbon indicated the continuous production of organic carbon with small molecular weights, which provided sustainable and effective electron donor for denitrification. However, sole sulfur or iron did not effectively promote the denitrification rate and nitrogen removal efficiency, even though the related microbial community had been formed.

Discrepant roles of a quorum quenching bacterium (Rhodococcus sp. BH4) in growing dual-species biofilms

Quorum quenching (QQ) is a promising alternative method for biofilm control. However, a largely unexplored issue is the mechanism through which QQ bacteria interact with biofilm-forming bacteria. Here, we explore inter-species interactions during biofilm development (using 96-well polystyrene plates in a static incubator) between the QQ bacterium Rhodococcus sp. BH4 and sludge bacteria. Experimental results revealed that strain BH4 provoked both competitive (76%) and cooperative (24%) interactions (P < 0.05) in dual-species biofilms after 24 h of incubation (mature biofilm), implying that signal destruction by strain BH4 was strain-dependent. Besides hike in the biofilm biomass (~21%), amount of extracellular polymeric substances (EPS) (25-30 times) and particle size (3.5 times) in the Serratia sp. JSB1 biofilm were increased by str. BH4. This suggests that strain BH4 may only have quenching effects against certain bacteria, and that such effects are overlooked at the community level. Taken together, present results imply that in a given biofilm community, not all QS-bacteria interact similarly with Rhodococcus sp. BH4, either because QS-bacteria are tolerant of strain BH4 or QS-bacteria have more than one mechanism for biofilm development. Overall, the QQ-strategy alone seems ineffective at controlling biofilm development, although it may be used in combination with other strategies.

Characterizations of dissolved organic matter and bacterial community structures in rice washing drainage (RWD)-based synthetic groundwater denitrification

In this study, characteristics of dissolved organic matter (DOM) and bacterial community structure in rice washing drainage (RWD)-based groundwater denitrification systems inoculated with and without seeding sludge were investigated. Complete nitrate removal was achieved with a maximum denitrification rate of 64.1 mg NO₃^--N·(gVSS·h)^-1. Analysis of three-dimension fluorescence excitation-emission matrix (FEEM) identified three main compositions of DOM associated with tryptophan protein-like, aromatic protein-like, and polycarboxylate humic acid-like substances in the inoculated system, while one composition associated with tryptophan protein-like substance in the un-inoculated system. Illumina sequencing analysis revealed a distinguished bacterial community structure in two systems over time. Notably, the microbial diversity was significant lower in the un-inoculated system than that in the system inoculated with seeding sludge. The predominant phyla shifted from Proteobacteria (49.2%), Bacteroidetes (20.5%) and Chloroflexi (14.8%) in the seeding sludge to Bacteroidetes (56.3%) and Proteobacteria (37.7%) after the RWD addition in the inoculated system. With RWD as sole microbe source, temporal changes in the bacterial structure from Proteobacteria (99.4%) and Bacteroidetes (5.3%) to Proteobacteria (88.8%) and Bacteroidetes (10.3%) were observed in the un-inoculated system. Specific comparison down to the genus level showed the dominant denitrifying bacteria of Thiobacillus, Anaerolineaceae and Methylophilaceae in the seeding sludge. Ideonella, Cloacibacterium and Enterobacter were dominant after the RWD addition in the inoculated system, while Stenotrophomonas and Enterobacter were dominant genera when RWD as sole bacteria source in the un-inoculated system. This finding indicates that both RWD addition and inoculation had strong impacts on bacterial community structure.

Effect of carbon sources on nitrous oxide emission in a modified Ludzak Ettinger process

Effect of methanol and glycerol on nitrous oxide (N2O) emission in two laboratory-scale modified Ludzak Ettinger (MLE) processes was investigated during three distinct periods: dissolved oxygen (DO) control by intermittent aeration with a DO controller, and high and low aeration rates. N2O consumption rate in an anoxic tank and aeration mode influenced N2O emission rates from the MLE processes. In the DO control period, N2O emission rate from the glycerol-fed MLE process was higher than the methanol-fed counterpart, likely caused by a higher N2O consumption rate in an anoxic tank of the methanol-fed process. During the period of a higher aeration rate, N2O emission rates from both processes were comparable. In contrast, during the period of a lower aeration rate, N2O emission rate from the methanol-fed MLE process was higher than that from the glycerol-fed counterpart likely because of a higher degree of nitrite accumulation, corroborated by statistical analysis. N2O consumption activities of biomasses fed with the different carbon sources were distinct. However, the high activity did not necessarily result in a decrease in N2O emission rate from an aerobic tank and the effect of nitrite on the emission was stronger under the tested conditions.

Environmental performance of an integrated fixed-film activated sludge (IFAS) reactor treating actual municipal wastewater during start-up phase

The present study summarizes the start-up performance and lessons learned during the start-up and optimization of a pilot-scale plant employing integrated fixed film activated sludge (IFAS) process treating actual municipal wastewater. A comprehensive start-up was tailored and implemented to cater for all the challenges and problems associated with start-up. After attaining desired suspended biomass (2,000-3,000 mg/L) and sludge age (∼7 days), the average biological oxygen demand (BOD) and chemical oxygen demand (COD) removals were observed as 77.3 and 70.9%, respectively, at optimized conditions, i.e. hydraulic retention time (HRT), 6.9 h; return sludge rate, 160%. The influent concentrations of COD, BOD, total suspended solids, NH3-N, total nitrogen and total phosphorus were found to be in the range of 157-476 mg/L, 115-283 mg/L, 152-428 mg/L, 23.2-49.3 mg/L, 30.1-52 mg/L and 3.6-7.8 mg/L, respectively, and the minimum effluent concentrations were achieved as ∼49 mg/L, 23 mg/L, 35 mg/L, 2.2 mg/L, 3.4 mg/L and 2.8 mg/L, respectively, at optimum state. The present system was found effective in the removal of pathogenic bacteria (Escherichia coli, 79%; Salmonella spp., 97.5%; Shigella spp., 92.9%) as well as coliforms (total coliforms, 97.65%; faecal coliforms, 80.35%) without any disinfection unit. Moreover it was observed that the time required for the stabilization of the plant was approximately 3 weeks if other parameters (sludge age, HRT and dissolved oxygen) are set to optimized values.

Microbial ecology of denitrification in biological wastewater treatment

Globally, denitrification is commonly employed in biological nitrogen removal processes to enhance water quality. However, substantial knowledge gaps remain concerning the overall community structure, population dynamics and metabolism of different organic carbon sources. This systematic review provides a summary of current findings pertaining to the microbial ecology of denitrification in biological wastewater treatment processes. DNA fingerprinting-based analysis has revealed a high level of microbial diversity in denitrification reactors and highlighted the impacts of carbon sources in determining overall denitrifying community composition. Stable isotope probing, fluorescence in situ hybridization, microarrays and meta-omics further link community structure with function by identifying the functional populations and their gene regulatory patterns at the transcriptional and translational levels. This review stresses the need to integrate microbial ecology information into conventional denitrification design and operation at full-scale. Some emerging questions, from physiological mechanisms to practical solutions, for example, eliminating nitrous oxide emissions and supplementing more sustainable carbon sources than methanol, are also discussed. A combination of high-throughput approaches is next in line for thorough assessment of wastewater denitrifying community structure and function. Though denitrification is used as an example here, this synergy between microbial ecology and process engineering is applicable to other biological wastewater treatment processes.

Use of stable isotope probing to assess the fate of emerging contaminants degraded by white-rot fungus

The widespread of emerging contaminants in the environment and their potential impact on humans is a matter of concern. White-rot fungi are cosmopolitan organisms able to remove a wide range of pharmaceuticals and personal care products (PPCP) through cometabolism (i.e. laccases and peroxidases) or detoxification mechanisms (i.e. cytochrome P450 system). However, the use of PPCP as carbon source for these organisms is largely unexplored. Here, we used carbon stable isotope tracer experiments to assess the fate of anti-inflammatory diclofenac (DCF) and UV filter benzophenone-3 (BP3) during degradation by Trametes versicolor. The comparison between carbon isotopic composition of emitted carbon dioxide from 13C-labelled DCF ([acetophenyl ring-13C6]-DCF) and 13C-BP3 ([phenyl-13C6]-BP3) versus their 12C-homologue compounds showed mineralization of about 45% and 10% of the 13C contained in their respective molecules after 9 days of incubation. The carbon isotopic composition of the bulk biomass and the application of amino acid-stable isotope probing (SIP) allowed distinguishing between incorporation of 13C from BP3 into amino acids, which implies the use of this emerging contaminant as carbon source, and major intracellular accumulation of 13C from DCF without implying the transformation of its labelled phenyl ring into anabolic products. A mass balance of 13C in different compartments over time provided a comprehensive picture of the fate of DCF and BP3 across their different transformation processes. This is the first report assessing biodegradation of PPCP by SIP techniques and the use of emerging contaminants as carbon source for amino acid biosynthesis.

Electron competition among nitrogen oxides reduction during methanol-utilizing denitrification in wastewater treatment

Limited availability of carbon sources has been regarded as an important factor leading to N2O accumulation during denitrification in wastewater treatment. By varying the carbon (methanol) loading rate to a methanol utilizing denitrifying culture in the presence of various electron acceptors (nitrate, nitrite, N2O and their combinations), this study quantitatively investigated the electron distribution among different nitrogen oxide reductases during denitrification. The results showed that electron competition occurs under not only carbon limiting but also carbon abundant conditions. The electron distribution among the nitrogen oxide reductases is affected by the carbon loading rate, with a lower fraction of electrons distributed to the N2O reductase with reduced carbon loading rate. N2O accumulation occurs when the electron flux going to nitrite reduction is higher than that going to N2O reduction. The study also showed that, for the culture investigated, the carbon to nitrogen ratio is not a key factor leading to N2O accumulation.

Waste gas biofiltration: advances and limitations of current approaches in microbiology

As confidence in gas biofiltration efficacy grows, ever more complex malodorant and toxic molecules are ameliorated. In parallel, for many countries, emission control legislation becomes increasingly stringent to accommodate both public health and climate change imperatives. Effective gas biofiltration in biofilters and biotrickling filters depends on three key bioreactor variables: the support medium; gas molecule solubilization; and the catabolic population. Organic and inorganic support media, singly or in combination, have been employed and their key criteria are considered by critical appraisal of one, char. Catabolic species have included fungal and bacterial monocultures and, to a lesser extent, microbial communities. In the absence of organic support medium (soil, compost, sewage sludge, etc.) inoculum provision, a targeted enrichment and isolation program must be undertaken followed, possibly, by culture efficacy improvement. Microbial community process enhancement can then be gained by comprehensive characterization of the culturable and total populations. For all species, support medium attachment is critical and this is considered prior to filtration optimization by water content, pH, temperature, loadings, and nutrients manipulation. Finally, to negate discharge of fungal spores, and/or archaeal and/or bacterial cells, capture/destruction technologies are required to enable exploitation of the mineralization product CO(2).

Enhancing nitrogen removal in an Orbal oxidation ditch by optimization of oxygen supply: practice in a full-scale municipal wastewater treatment plant

Seven different aeration modes, in which oxygen supply was changed by adjusting the number of aerators, were designed and applied in a full-scale municipal wastewater treatment plant with Orbal oxidation ditch to investigate the influence of dissolved oxygen (DO) on nitrogen removal performance. The full-scale experiment results of 574 days showed that nitrogen removal efficiency depended on the degree of nitrification and denitrification in the outer channel, which was the largest contributor for TN removal in the Orbal oxidation ditch. Appropriate aeration control in the outer channel was essential to balance nitrification and denitrification in the Orbal oxidation ditch. When DO was as low as about 0.2 mg/L in the outer channel, the highest TN removal efficiency of 75% was obtained. Microbial analysis confirmed that aerobic and anaerobic bacteria coexisted in the outer channel. The greater species diversity and more intensive activities of these bacteria in aeration Mode V may be responsible for the higher TN removal efficiency compared with Mode III. These results suggest that different aerated conditions in the Orbal oxidation ditch might have a significant effect on microbial community characteristics and nitrogen removal efficiencies.