Fate of amoxicillin in mixed-culture bioreactors and its effects on microbial growth and resistance to silver ions

An Efficient Strategy for Enhancing the Adsorption of Antibiotics and Drugs from Aqueous Solutions Using an Effective Limestone-Activated Carbon-Alginate Nanocomposite

Based on the adsorption performance of a porous nanocomposite with limestone (LS), activated carbon (AC) and sodium alginate (SG), a unique, multifunctional LS-AC-SG nanocomposite absorbent was designed and prepared for extracting antibiotics and drugs from aqueous solutions. The composite exhibited the following advantages: quick and simple to prepare, multifunctionality and high efficiency. Amoxicillin (AMX) and diclofenac (DCF) were chosen as the conventional antibiotic and the drug, respectively. The prepared nanocomposite's physicochemical characteristics were calculated through numerous characterization methods. The structure of the surface was made up of interconnected pores that can easily confine pollutants. The surface area was measured to be 27.85 m2/g through BET analysis. The results show that the maximum absorption capacity of amoxicillin and diclofenac was 99.6% and 98.4%, respectively, at a contact time of 40 min. The maximum removal of amoxicillin and diclofenac was reached at pH = 2. Adsorption analysis revealed that adsorption isotherm and kinetic data matched the pseudo-first-order kinetic and the Langmuir isotherm models. The results imply that the synthesized nanocomposites have the capacity to remove amoxicillin (AMX) and diclofenac (DCF) from aqueous solutions.

Removal of Antibiotics from Aqueous Solutions by a Carbon Adsorbent Derived from Protein-Waste-Doped Biomass

Antibiotic pollution in water is an urgent environmental problem. A novel carbon adsorbent derived from powdery puffed waterfowl feather (PPWF)-doped Phragmites australis (PA) was proposed for enhancing the removal of antibiotics from water in this study. Amoxicillin (AMX) and cephalexin (CEX) were selected as typical antibiotics. PPWF-doped (FPAC) and -undoped (PAC) carbon adsorbents were developed to test the adsorption capacities and mechanisms of AMX and CEX. Characterization techniques such as N₂ adsorption/desorption, Fourier transform infrared, X-ray diffraction, scanning electron microscopy, elemental analysis, and Boehm titration were used to determine the properties of adsorbents. Results showed that more microporous structure and surface functional groups are exhibited in FPAC compared to PAC. The nitrogen-containing functional groups were introduced in FPAC. Adsorption capacities at different contact times, pH, and initial concentration were investigated by batch experiments. The AMX and CEX maximum adsorption capacities of FPAC are 25.2 and 30.1% higher than those of PAC, respectively. The kinetic data were well represented by the pseudo-second-order model for AMX and CEX adsorption. The equilibrium data agreed well with the Langmuir model for AMX adsorption and the Freundlich model for CEX adsorption. The adsorption mechanism of AMX and CEX was chemisorption, such as electrostatic attraction and covalent bonding.

Flow cytometry applications in water treatment, distribution, and reuse: A review

Ensuring safe and effective water treatment, distribution, and reuse requires robust methods for characterizing and monitoring waterborne microbes. Methods widely used today can be limited by low sensitivity, high labor and time requirements, susceptibility to interference from inhibitory compounds, and difficulties in distinguishing between viable and non-viable cells. Flow cytometry (FCM) has recently gained attention as an alternative approach that can overcome many of these challenges. This article critically and systematically reviews for the first time recent literature on applications of FCM in water treatment, distribution, and reuse. In the review, we identify and examine nearly 300 studies published from 2000 to 2018 that illustrate the benefits and challenges of using FCM for assessing source-water quality and impacts of treatment-plant discharge on receiving waters, wastewater treatment, drinking water treatment, and drinking water distribution. We then discuss options for combining FCM with other indicators of water quality and address several topics that cut across nearly all applications reviewed. Finally, we identify priority areas in which more work is needed to realize the full potential of this approach. These include optimizing protocols for FCM-based analysis of waterborne viruses, optimizing protocols for specifically detecting target pathogens, automating sample handling and preparation to enable real-time FCM, developing computational tools to assist data analysis, and improving standards for instrumentation, methods, and reporting requirements. We conclude that while more work is needed to realize the full potential of FCM in water treatment, distribution, and reuse, substantial progress has been made over the past two decades. There is now a sufficiently large body of research documenting successful applications of FCM that the approach could reasonably and realistically see widespread adoption as a routine method for water quality assessment.

Degradation of antibiotic activity during UV/H2O2 advanced oxidation and photolysis in wastewater effluent

Trace levels of antibiotics in treated wastewater effluents may present a human health risk due to the rise of antibacterial activity in the downstream environments. Advanced oxidation has a potential to become an effective treatment technology for transforming trace antibiotics in wastewater effluents, but residual or newly generated antibacterial properties of transformation products are a concern. This study demonstrates the effect of UV photolysis and UV/H2O2 advanced oxidation on transformation of 6 antibiotics, each a representative of a different structural class, in pure water and in two different effluents and reports new or confirmatory photolysis quantum yields and hydroxyl radical rate constants. The decay of the parent compound was monitored with HPLC/ITMS, and the corresponding changes in antibacterial activity were measured using bacterial inhibition assays. No antibacterially active products were observed following treatment for four of the six antibiotics (clindamycin, ciprofloxacin, penicillin-G, and trimethoprim). The remaining two antibiotics (erythromycin and doxycycline) showed some intermediates with antibacterial activity at low treatment doses. The antibacterially active products lost activity as the UV dose increased past 500 mJ/cm(2). Active products were observed only in wastewater effluents and not in pure water, suggesting that complex secondary reactions controlled by the composition of the matrix were responsible for their formation. This outcome emphasizes the importance of bench-scale experiments in realistic water matrices. Most importantly, the results indicate that photosensitized processes during high dose wastewater disinfection may be creating antibacterially active transformation products from some common antibiotics.

Antimicrobial silver: uses, toxicity and potential for resistance

This review gives a comprehensive overview of the widespread use and toxicity of silver compounds in many biological applications. Moreover, the bacterial silver resistance mechanisms and their spread in the environment are discussed. This study shows that it is important to understand in detail how silver and silver nanoparticles exert their toxicity and to understand how bacteria acquire silver resistance. Silver ions have shown to possess strong antimicrobial properties but cause no immediate and serious risk for human health, which led to an extensive use of silver-based products in many applications. However, the risk of silver nanoparticles is not yet clarified and their widespread use could increase silver release in the environment, which can have negative impacts on ecosystems. Moreover, it is shown that silver resistance determinants are widely spread among environmental and clinically relevant bacteria. These resistance determinants are often located on mobile genetic elements, facilitating their spread. Therefore, detailed knowledge of the silver toxicity and resistance mechanisms can improve its applications and lead to a better understanding of the impact on human health and ecosystems.

Simultaneous removal and evaluation of organic substrates and NH3-N by a novel combined process in treating chemical synthesis-based pharmaceutical wastewater

A full-scale novel combined anaerobic/micro-aerobic and two-stage aerobic biological process is used for the treatment of an actual chemical synthesis-based pharmaceutical wastewater containing amoxicillin. The anaerobic system is an up-flow anaerobic sludge blanket (UASB), the micro-aerobic system is a novel micro-aerobic hydrolysis acidification reactor (NHAR) and the two-stage aerobic process comprised cyclic activated sludge system (CASS) and biological contact oxidation tank (BCOT). The influent wastewater was high in COD, NH(3)-N varying daily 4016-13,093 mg-COD L(-1) and 156.4-650.2 mg-NH(3)-N L(-1), amoxicillin varying weekly between 69.1 and 105.4 mg-amoxicillin L(-1), respectively; Almost all the COD, NH(3)-N, amoxicillin were removed by the biological combined system, with removal percentages 97%, 93.4% and 97.2%, respectively, leaving around 104 mg-COD L(-1), 9.4 mg-NH(3)-N L(-1) and 2.6±0.8 mg-amoxicillin L(-1) in the final clarifier effluent. The performance evaluation of the wastewater treatment plant (WWTP) by mathematical statistic methods shown that at most of time effluent can meet the higher treatment discharge standard. In addition, the fate of amoxicillin in the full-scale WWTP and the amoxicillin removal rate of each different removal routes in UASB, NHAR, CASS, BCOT and final clarifier processes are investigated in this paper. The results show that biodegradation, adsorption and hydrolysis are the major mechanisms for amoxicillin removal.