Ligand influences of the structures of molybdenum oxide networks

Hybrid bronzes: mixed-valence organic-inorganic metal oxides as a tunable material platform

We demonstrate that mixed-valence layered organic-inorganic metal oxides of the form (L)zHxMO3 (L = neutral ligand; M = Mo, W; z = 0.5, 1; 0 < x < 2), which we call hybrid bronzes, can be readily synthesized through mild solution-state self-assembly reactions to integrate the stability and electronic utility of inorganic metal oxide bronzes with the chemical diversity and functionality of organic molecules. We use single-crystal and powder X-ray diffraction coupled with X-ray, electronic, and vibrational spectroscopies to show that the products of aqueous pre-, mid-, or post-synthetic reduction are mixed-valence versions of highly crystalline layered hybrid oxides. Pillaring, bilayered, or canted bilayered arrangements of molecular arrays relative to inorganic sheets are dictated by judicious choice of organic ligands that can also incorporate chemical, redox, or photoactive handles. Significantly, bond-valence sum analysis and diffuse reflectance spectroscopy indicate relatively delocalized electronic behavior and four-point variable-temperature electrical transport measurements show that hybrid bronzes have comparable conductivity to their all-inorganic parent compounds. This work establishes a solution-processable, inexpensive, air- and water-stable, and non-toxic material family whose electronic bands can be readily tuned and doped, thereby positioning hybrid bronzes to address myriad material challenges.

Synthesis and structural characterization of a new heterometallicmolybdate coordination polymer based on a µ3-bridging amino alcohol

The reaction of Na2MoO4·2H2O with 2-amino-2-(hydroxymethyl)propane-1,3-diol (LH) in water at room temperature results in the formation of the heterometallic coordination polymer [Mo2O6L2(Na2(H2O)4)]·2H2O 1 (L = 2-amino-3-hydroxy-2-(hydroxymethyl)propan-1-olato). The structure of 1 consists of a neutral (Mo2O6) unit located on an inversion center. The Mo atoms exhibit hexa-coordination and are bonded to two terminal and two bridging oxido ligands, an alkoxide oxygen and the amine N atoms of an anionic ligand L– resulting in the formation of an edge-sharing {Mo2O8N2} bioctahedron. The Na+ cations of a centrosymmetric bis(μ2-aqua)-bridged (Na2(H2O)4)2+ unit are penta-coordinated and bonded to two symmetry related L– ligands via the oxygen atoms of their OH groups. The µ3-bridging tetradentate binding mode of L– results in the formation of a two-dimensional heterometallic coordination polymer. The constituents of 1 viz. (Mo2O6), (L)–, (Na2(H2O)4)2+ and lattice water molecules are interlinked with the aid of three varieties of hydrogen bonding interactions. The corresponding tungstate reported recently has been obtained through a similar synthetic protocol and is isostructural.

Heterogeneous catalysis with an organic–inorganic hybrid based on MoO3 chains decorated with 2,2′-biimidazole ligands

Polymeric [MoO₃(2,2′-biimidazole)]·H₂O outperforms other one-dimensional MoO₃-ligand hybrid materials as a heterogeneous and recyclable catalyst for (bio)olefin epoxidation and sulfoxidation.

Simple Hybrids Based on Mo or W Oxides and Diamines: Structure Determination and Catalytic Properties

Abstract

Crystalline hybrid catalysts based on molybdenum or tungsten oxide and aliphatic diamines were synthesized via simple, eco-friendly reproducible methodologies, starting from commercially available and relatively inexpensive organic and inorganic precursors, and using water as solvent under mild conditions. The crystal structures of the obtained fine powdered solids were solved ab initio from powder X-ray diffraction data. The type of organic component (1,2-diaminoethane, 1,2-diaminopropane, 1,3-diaminopropane) may play a structure-directing role. On the other hand, different metals (M = Mo, W) may lead to isostructural one-dimensional hybrids of the type MO3(L) with the same bidentate diamine ligand L. The prepared catalysts were investigated for the liquid phase oxidation of saturated and unsaturated hydrocarbons (cis-cyclooctene, cyclooctane), using different types of oxidants (O2, H2O2, tert-butyl hydroperoxide). Differences in catalytic performances associated with distinct structural features were investigated.

Graphic Abstract

A Comparative Study of Molybdenum Carbonyl and Oxomolybdenum Derivatives Bearing 1,2,3-Triazole or 1,2,4-Triazoles in Catalytic Olefin Epoxidation

The molybdenum(0)-carbonyl-triazole complexes [Mo(CO)₃(L)₃] [L = 1,2,3-triazole (1,2,3-trz) or 1,2,4-triazole (1,2,4-trz)] have been prepared and examined as precursors to molybdenum(VI) oxide catalysts for the epoxidation of cis-cyclooctene. Reaction of the carbonyl complexes with the oxidant tert-butyl hydroperoxide (TBHP) (either separately or in situ) gives oxomolybdenum(VI) hybrid materials that are proposed to possess one-dimensional polymeric structures in which adjacent oxo-bridged dioxomolybdenum(VI) moieties are further linked by bidentate bridging triazole (trz) ligands. A pronounced ligand influence on catalytic performance was found and the best result (quantitative epoxide yield within 1 h at 70 °C) was obtained with the 1,2,3-triazole oxomolybdenum(VI) hybrid. Both molybdenum oxide-triazole compounds displayed superior catalytic performance in comparison with the known hybrid materials [MoO₃(trz)_0.5], which have different structures based on organic-inorganic perovskite-like layers. With aqueous H₂O₂ as the oxidant instead of TBHP, all compounds were completely soluble and active. A pronounced ligand influence on catalytic performance was only found for the hybrids [MoO₃(trz)_0.5], and only the 1,2,4-trz compound displayed reaction-induced self-precipitation behavior. An insight into the type of solution species that may be involved in the catalytic processes with these compounds was obtained by separately treating [MoO₃(1,2,4-trz)_0.5] with excess H₂O₂, which led to the crystallization of the complex (NH₄)_1.8(H₃O)_0.2[Mo₂O₂(μ₂-O)(O₂)₄(1,2,4-trz)]·H₂O. The single-crystal X-ray investigation of this complex reveals an oxo-bridged dinuclear structure with oxodiperoxo groups being further linked by a single triazole bridge.

On the Border between Low-Nuclearity and One-Dimensional Solids: A Unique Interplay of 1,2,4-Triazolyl-Based {CuII5(OH)2} Clusters and MoVI-Oxide Matrix

A pentanuclear Cu^II₅-hydroxo cluster possessing an unusual linear-shaped configuration was formed and crystallized under hydrothermal conditions as a result of the unique cooperation of bridging 1,2,4-triazole ligand ( trans-1,4-cyclohexanediyl-4,4'-bi(1,2,4-triazole) ( tr₂ cy)), Mo^VI-oxide, and CuSO₄. This structural motif can be rationalized by assuming in situ generation of {Cu₂Mo₆O₂₂}^4- anions, which represent heteroleptic derivatives of γ-type [Mo₈O₂₆]^4- further interlinked by [Cu₃(OH)₂]⁴⁺ cations through [ N- N] bridges. The framework structure of the resulting compound [Cu₅(OH)₂( tr₂ cy)₂Mo₆O₂₂]·6H₂O (1) is thus built up from neutral heterometallic {Cu₅(OH)₂Mo₆O₂₂} _n layers pillared with tetradentate tr₂ cy. Quantum-chemical calculations demonstrate that the exclusive site of the parent γ-[Mo₈O₂₆]^4- cluster into which Cu^II inserts corresponds with the site that has the lowest defect ("MoO₂ vacancy") formation energy, demonstrating how the local metal-polyoxomolybdate chemistry can express itself in the final crystal structure. Magnetic susceptibility measurements of 1 show strong antiferromagnetic coupling within the Cu₅ chain with exchange parameters J₁ = -500(40) K (-348(28) cm^-1), J₂ = -350(10) K (-243(7) cm^-1) and g = 2.32(2), χ² = 6.5 × 10^-4. Periodic quantum-chemical calculations reproduce the antiferromagnetic character of 1 and connect it with an effective ligand-mediated spin coupling mechanism that comes about from the favorable structural arrangement between the Cu centers and the OH^-, O^2-, and tr₂ cy bridging ligands.

High-yield synthesis and catalytic response of chainlike hybrid materials of the [(MoO3)m(2,2′-bipyridine)n] family

MoO₃/2,2′-bipyridine hybrids have been prepared (hydro)thermally from [MoO₃(2,2′-bipy)] and compared as catalysts in styrene oxide ethanolysis and olefin epoxidation.

Bicapped Keggin polyoxomolybdates: discrete species and experimental and theoretical investigations on the electronic delocalization in a chain compound

Monomeric and 1D reduced Keggin polyoxometalates have been isolated as black crystals soluble in DMSO; DFT calculations allowed the explanation of the magnetic behavior.

Significant enhancement of conductance of a hybrid layered molybdate semiconductor by light or heat

Introduction of the viologen cation, a well-known electron acceptor, into molybdate layers led to a dramatic change in the conductance of the 2D hybrid material in the process of photo-induced and thermo-induced coloration.

“Pinwheel” subunit-directed polyoxometalate-based hybrid compound [Cu(bimb)2]2[β-Mo8O26] with both helixes and chiral layers

An unprecedented hybrid octamolybdate-based compound with both chiral and helical structure, consisting of a pair of enantiomorphous chiral “pinwheel” subunits, has been synthesized and its photocatalytic properties have been investigated.

Crystal Structure and Catalytic Behavior in Olefin Epoxidation of a One-Dimensional Tungsten Oxide/Bipyridine Hybrid

The tungsten oxide/2,2'-bipyridine hybrid material [WO3(2,2'-bpy)]·nH2O (n = 1-2) (1) has been prepared in near quantitative yield by the reaction of H2WO4, 2,2'-bpy, and H2O in the mole ratio of ca. 1:2:700 at 160 °C for 98 h in a rotating Teflon-lined digestion bomb. The solid-state structure of 1 was solved and refined through Rietveld analysis of high-resolution synchrotron X-ray diffraction data collected for the microcrystalline powder. The material, crystallizing in the orthorhombic space group Iba2, is composed of a one-dimensional organic-inorganic hybrid polymer, ∞(1)[WO3(2,2'-bpy)], topologically identical to that found in the previously reported anhydrous phases [MO3(2,2'-bpy)] (M = Mo, W). While in the latter the N,N'-chelated 2,2'-bpy ligands of adjacent corner-shared {MO4N2} octahedra are positioned on the same side of the 1D chain, in 1 the 2,2'-bpy ligands alternate above and below the chain. The catalytic behavior of compound 1 for the epoxidation of cis-cyclooctene was compared with that for several other tungsten- or molybdenum-based (pre)catalysts, including the hybrid polymer [MoO3(2,2'-bpy)]. While the latter exhibits superior performance when tert-butyl hydroperoxide (TBHP) is used as the oxidant, compound 1 is superior when aqueous hydrogen peroxide is used, allowing near-quantitative conversion of the olefin to the epoxide. With H2O2, compounds 1 and [MoO3(2,2'-bpy)] act as sources of soluble active species, namely, the oxodiperoxo complex [MO(O2)2(2,2'-bpy)], which is formed in situ. Compounds 1 and [WO(O2)2(2,2'-bpy)] (2) were further tested in the epoxidation of cyclododecene, trans-2-octene, 1-octene, (R)-limonene, and styrene. The structure of 2 was determined by single-crystal X-ray diffraction and found to be isotypical with the molybdenum analogue.