Control of copper(I) iodide architectures by ligand design: angular versus linear bridging ligands

Halogen-Modulated 2D Coordination Polymers for Efficient Hydrogen Peroxide Photosynthesis under Air and Pure Water Conditions

H2 O2 is a widely used eco-friendly oxidant and a potential energy carrier. Photocatalytic H2 O2 production from water and O2 is an ideal approach with the potential to address the current energy crisis and environmental issues. Three zig-zag two-dimensional coordination polymers (2D CPs), named CuX-dptz, were synthesized by a rapid and facile method at room temperature, showing preeminent H2 O2 photoproduction performance under pure water and open air without any additives. CuBr-dptz exhibits a H2 O2 production rate high up to 1874 μmol g-1  h-1 , exceeding most reported photocatalysts under this condition, even comparable to those supported by sacrificial agents and O2 . The coordination environment of Cu can be modulated by halogen atoms (X=Cl, Br, I), which in turn affects the electron transfer process and finally determines the reaction activity. This is the first time that 2D CPs have been used for photocatalytic H2 O2 production in such challenging conditions, which provides a new pathway for the development of portable in situ H2 O2 photosynthesis devices.

Isomers of Terpyridine as Ligands in Coordination Polymers and Networks Containing Zinc(II) and Cadmium(II)

The use of divergent 4,2′:6′,4″- and 3,2′:6′,3″-terpyridine ligands as linkers and/or nodes in extended coordination assemblies has gained in popularity over the last decade. However, there is also a range of coordination polymers which feature 2,2′:6′,2″-terpyridine metal-binding domains. Of the remaining 45 isomers of terpyridine, few have been utilized in extended coordination arrays. Here, we provide an overview of coordination polymers and networks containing isomers of terpyridine and either zinc(II) and cadmium(II). Although the motivation for investigations of many of these systems is their luminescent behavior, we have chosen to focus mainly on structural details, and we assess to what extent assemblies are reproducible. We also consider cases where there is structural evidence for competitive product formation. A point that emerges is the lack of systematic investigations.

Cu(I)-I-2,4-diaminopyrimidine Coordination Polymers with Optoelectronic Properties as a Proof of Concept for Solar Cells

Two coordination polymers with formulas [CuI(dapym)]_n and [Cu₂I₂(dapym)]_n (dapym = 2,4-diaminopyrimidine) have been synthesized in water at room temperature. According to the stoichiometry used, mono (1D) and the two-dimensional (2D) structures can be obtained. Both are made up of Cu₂I₂ double chains. Their high insolubility in the reaction medium also makes it possible to obtain them on a nanometric scale. Their structural flexibility and short Cu-Cu distances provoke interesting optoelectronic properties and respond to physical stimuli such as pressure and temperature, making them interesting for sensor applications. The experimental and theoretical studies allow us to propose different emission mechanisms with different behaviors despite containing the same organic ligand. These behaviors are attributed to their structural differences. The emission spectra versus pressure and temperature suggest competencies between different transitions, founding critical Cu₂I₂ environments, i.e., symmetric in the 1D compound and asymmetric for the 2D one. The intensity in the 2D compound's emission increases with decreasing temperature, and this behavior can be rationalized with a structural constriction that decreases the Cu-Cu and Cu-I distances. However, compound 1D exhibits a contrary behavior that may be related to a change of the organic ligand's molecular configuration. These changes imply that a more significant Π-Π interaction counteracts the contraction in distances and angles when the temperature decreased. Also, the experimental conductivity measurements and theoretical calculations show a semiconductor behavior. The absorption of the 1D compound in UV, its intense emission at room temperature, and the reduction to nanometric size have allowed us to combine it homogeneously with ethyl vinyl acetate (EVA), creating a new composite material. The external quantum efficiency of this material in a Si photovoltaic mini-module has shown that this compound is an active species with application in solar cells since it can move the photons of the incident radiation (UV region) to longer wavelengths.

Slight ligand modifications within multitopic linear hydroxamates promotes connectivity differences in Cu(ii) 1-D coordination polymers

Two novel hydroxamic acids have been used in constructing two 1-D coordination polymers. Slight structural differences promote connectivity changes upon Cu(ii) metalation as rationalised using DFT calculations and Hirschfeld surface analysis.

Copper(i)–iodide cluster structures as functional and processable platform materials

This review provides a complete overview of the progress towards implementation of CuI-nanoclusters in functional materials and devices.

The terpyridine isomer game: from chelate to coordination network building block

The first 4,2':6',4''-terpyridine (4,2':6',4''-tpy) containing coordination polymer was reported over 20 years ago and in the last decade, there has been increased interest in the use of ditopic 4,2':6',4''-tpy ligands as linkers in coordination polymers and 2D-networks. Functionalization in the 4'-position of 4,2':6',4''-tpy is synthetically straightforward, giving access to a large suite of building blocks. Less well explored is the coordination chemistry of 3,2':6',3''-tpy ligands which exhibit greater conformational flexibility than 4,2':6',4''-tpy. One approach to making the transition from 2D- to 3D-networks is to utilize tetratopic bis(4,2':6',4''-tpy) and bis(3,2':6',3''-tpy) ligands which act as 4-connecting nodes. In this highlight, we survey recent progress towards a better understanding of the design principles associated with the use of ditopic and tetratopic 4,2':6',4''-tpy and 3,2':6',3''-tpy containing ligands and their roles both as linkers and nodes in coordination assemblies.

Crystal-engineering and luminescence studies of 1,3,5-tris(3-pyridylethynyl)benzene or 1,3,5-tris(4-pyridylethynyl)benzene with copper(i) iodides

The interlocking of 1-D frameworks into the 28-membered rings of the adjacent chains generates a novel 1-D (1-D → 1-D) polyrotaxane framework of 3.

Structural characterization and optical properties of two copper(i)-iodide BODIPY coordination polymers

BODIPY chromophores with pyridyl or pyrimidinyl substituents exhibit strong solid-state fluorescence which is quenched in CuI coordination polymers.

Supramolecular Interactions Modulating Electrical Conductivity and Nanoprocessing of Copper-Iodine Double-Chain Coordination Polymers

Two coordination polymers (CPs), based on Cu(I)-I double zig-zag chains bearing isonicotinic acid or 3-chloroisonicotinic acid as terminal ligands with molecular recognition capabilities, have been synthesized and fully characterized. Both compounds present extended networks with supramolecular interactions directed by the formation of H-bonds between the complementary carboxylic groups, giving supramolecular sheets. The chloro substituent allows establishing additional Cl···Cl supramolecular interactions that reinforce the stability of the supramolecular sheets. These CPs are semiconductor materials; however, the presence of chlorine produces slight changes in the I-Cu-I chains, generating a worse overlap in the Cu-I orbitals, thus determining a decrease in its electrical conductivity value. These experimental results have also been corroborated by theoretical calculations using the study of the morphology of the density of states and 3D orbital isodensities, which determine that conductivity is mostly produced through the Cu-I skeleton and is less efficient in the case of the chloro derivative compound. A fast and efficient bottom-up approach based on the self-assembly of the initial building blocks and the low solutibility of these CPs has proved very useful for the production of nanostructures.

Directed adenine functionalization for creating complex architectures for material and biological applications

In this feature article, targeted design strategies are outlined for modified adenine nucleobase derivatives in order to construct metal-mediated discrete complexes, ring-expanded purine skeletons, linear and catenated coordination polymers, shape-selective MOFs, and purine-capped nanoparticles, with a wide range of applications from gas and solvent adsorption to bioimaging agents and anticancer metallodrugs. The success of such design strategies could be ascribed to the rich chemistry of purine and pyrimidine derivatives, versatile coordination behavior, ability to bind a host of metal ions, which could be further tuned by the introduction of additional functionalities, and their inherent propensity to hydrogen bond and exhibit π-π interactions. These noncovalent interactions produce stable frameworks and network solids that are useful as advanced materials, and the biocompatibility of these ligand complexes provides an impetus for assessing novel biological applications.

Crystal structure of catena-poly[[bis-(N-acethyl-thio-morpholine-κS)copper(I)]-μ-iodido]

The reaction of copper(I) iodide with N-acetyl-thio-morpholine (L, C6H11NOS) in aceto-nitrile results in a coordination polymer with composition [CuI(L)2] n . The CuI atom is coordinated by two S atoms and two I atoms, adopting a distorted tetra-hedral environment. The μ2-bridging mode of the I atoms gives rise to chains extending parallel to [010]. C-H⋯O hydrogen-bonding inter-actions between the chains lead to a three-dimensional network.

Stereochemically Distinct Cyclotetrasiloxanes Containing 3-Pyridyl Moieties and Their Functional Coordination Polymers

Synthesis of new cyclotetrasiloxane scaffolds containing peripherally functionalized 3-pyridyl moieties, [MeSiO(CH═CH(3)Py)]4 (L(1)) and [MeSiO(CH2CH2(3)Py)]4 (L(2)), and their reactivity studies with certain d(10) metal ions are reported. The ligand L(1) is obtained by the Heck-coupling reaction of tetramethyl tetravinyl tetrasiloxane (D4(vi)) and 3-bromopyridine in the presence of the Pd(0) catalysts. The as-synthesized ligand L(1) shows the presence of three stereoisomers, cis-trans-cis (L(1A)), cis-cis-trans (L(1B)), and all-trans (L(1C)), which are quantitatively separated by column chromatography. Subsequent reduction of L(1A), L(1B), and L(1C) with triethylsilane in the presence of catalytic amounts of Pd/C leads to the formation of the ligands L(2A), L(2B), and L(2C) with retention of stereochemistry due to the precursor moieties. Treatment of ZnI2 with L(1A) gives a one-dimensional coordination framework [(L(1A))4(ZnI2)2]∞, 1. These 1D-chains are further connected by π-π stacking interactions between the pyridyl groups of the adjacent chains leading to the formation of a three-dimensional network with the topology of a PtS net. The reaction of silver nitrate with ligand L(1B) gives a chain like one-dimensional cationic coordination polymer {[(L(1B))4Ag2]·2NO3·H2O·CH3OH }∞, 2, consisting of two different kinds of 32-membered macrocycles. Treatment of the all-trans ligand L(2C) with copper(I) iodide salt results in the formation of a cubane-type Cu4I4 cluster MOF [(L(2C))4Cu4I4]∞, 3, in a two-dimensional 4-connected uninodal sql/Shubnikov tetragonal plane net topology represented by the Schläfli symbol {4(4).6(2)}. This MOF displays a thermochromic luminescence behavior due to Cu4I4 clusters showing an orange emission at 298 K and a blue emission at 77 K.

Syntheses, characterization, and magnetic properties of novel divalent Co/Ni coordination polymers based on a V-shaped pyridine ligand and dicarboxylate acids

Syntheses, structures, and properties of compounds 1–3 were investigated in detail. In addition, a magnetism study of compound 3 indicates that there are antiferromagnetic interactions between Co atoms.

Reversible stimulus-responsive Cu(i) iodide pyridine coordination polymer

A coordination polymer based on CuI double chains with substituted pyrimidine is a dynamic and reversible material very sensible to both physical and chemical stimuli.

Metals, macrocycles and molecular assemblies - macrocyclic complexes in metallo-supramolecular chemistry

In this tutorial review the use of macrocyclic complexes as building blocks in a selection of supramolecular systems is discussed with emphasis on the properties, such as enhanced stabilities, that cyclic ligands and their complexes may impart on the resulting assemblies. An aim of the review is to exemplify the versatility of macrocyclic ligand complexes for use as components in a range of both discrete and polymeric systems. The use of macrocyclic systems for controlling CuI aggregation, as scaffolds for metal-cluster formation, as the cyclic components in interlocked catenane and rotaxane structures, for constructing assemblies based on macrocycle exo-coordination, for forming columnar stacks, as well as their roles as both structural and redox centres in a range of coordination polymer types are all presented.

catena-Poly[[bis-(acetato-κO)aqua-copper(II)]-μ-5-(pyridin-3-yl)pyrimidine-κN:N]

In the title compound, [Cu(CH₃CO₂)₂(C₉H₇N₃)(H₂O)]_n, the Cu^II ion is penta­coordinated in a square-pyramidal geometry. The N atoms of the two chelating symmetry-related 5-(pyridin-3-yl)pyrimidine ligands and the O atoms of the two monodentate acetate anions are nearly coplanar, with a mean deviation from the least-squares plane of 0.157 (2) Å and the Cu^II ion is displaced by 0.050 (3) Å from this plane towards the apical water O atom. Bridging through the bis-monodentate 5-(pyridin-3-yl)pyrimidine ligand forms a one-dimensional coordination polymer extending parallel to [010]. In the crystal, O—H⋯O hydrogen bonds link the mol­ecules into a two-dimensional supra­molecular structure parallel to (100). The crystal studied was an inversion twin with a 0.57 (3):0.43 (3) domain ratio.

Inhibiting copper(I) iodide aggregate assembly in the solid state via macrocyclic encapsulation

Three CuI complexes of diimine-bearing macrocyclic ligands are described. Reaction of CuI with macrocycles of different ring size gives rise to differing degrees of aggregation of (CuI)(n) in the solid state. X-Ray diffraction studies reveal that whereas macrocycles with smaller ring sizes give rise to simple mononuclear CuI diimine complexes, a macrocycle of larger ring size affords a dinuclear (CuI)(2) moiety, encompassed within the ligand ring. Thus, the macrocycle can be seen to determine the extent of CuI aggregation in the solid state.