Electronic Structure of Nitric Oxide Adducts of Bis(diaryl-1,2-dithiolene)iron Compounds: Four-Membered Electron-Transfer Series [Fe(NO)(L)2]z (z = 1+, 0, 1−, 2−)

Heteroligand Metal Complexes with Extended Redox Properties Based on Redox-Active Chelating Ligands of o-Quinone Type and Ferrocene

A combination of different types of redox-active systems in one molecule makes it possible to create coordination compounds with extended redox abilities, combining molecular and electronic structures determined by the features of intra- and intermolecular interactions between such redox-active centres. This review summarizes and analyses information from the literature, published mainly from 2000 to the present, on the methods of preparation, the molecular and electronic structure of mixed-ligand coordination compounds based on redox-active ligands of the o-benzoquinone type and ferrocenes, ferrocene-containing ligands, the features of their redox properties, and some chemical behaviour.

Nitric oxide activation facilitated by cooperative multimetallic electron transfer within an iron-functionalized polyoxovanadate-alkoxide cluster

Cooperative multimetallic electron transfer to accommodate substrate binding.

A series of NO-bound, iron-functionalized polyoxovanadate–alkoxide (FePOV–alkoxide) clusters have been synthesized, providing insight into the role of multimetallic constructs in the coordination and activation of a substrate. Upon exposure of the heterometallic cluster to NO, the vanadium-oxide metalloligand is oxidized by a single electron, shuttling the reducing equivalent to the {FeNO} subunit to form a {FeNO}⁷ species. Four NO-bound clusters with electronic distributions ranging from [VV3VIV2]{FeNO}⁷ to [VIV5]{FeNO}⁷ have been synthesized, and characterized via¹H NMR, infrared, and electronic absorption spectroscopies. The ability of the FePOV–alkoxide cluster to store reducing equivalents in the metalloligand for substrate coordination and activation highlights the ultility of the metal-oxide scaffold as a redox reservoir.

Nitric oxide activation by distal redox modulation in tetranuclear iron nitrosyl complexes

A series of tetranuclear iron complexes displaying a site-differentiated metal center was synthesized. Three of the metal centers are coordinated to our previously reported ligand, based on a 1,3,5-triarylbenzene motif with nitrogen and oxygen donors. The fourth (apical) iron center is coordinatively unsaturated and appended to the trinuclear core through three bridging pyrazolates and an interstitial μ4-oxide moiety. Electrochemical studies of complex [LFe3(PhPz)3OFe][OTf]2 revealed three reversible redox events assigned to the Fe(II)4/Fe(II)3Fe(III) (-1.733 V), Fe(II)3Fe(III)/Fe(II)2Fe(III)2 (-0.727 V), and Fe(II)2Fe(III)2/Fe(II)Fe(III)3 (0.018 V) redox couples. Combined Mössbauer and crystallographic studies indicate that the change in oxidation state is exclusively localized at the triiron core, without changing the oxidation state of the apical metal center. This phenomenon is assigned to differences in the coordination environment of the two metal sites and provides a strategy for storing electron and hole equivalents without affecting the oxidation state of the coordinatively unsaturated metal. The presence of a ligand-binding site allowed the effect of redox modulation on nitric oxide activation by an Fe(II) metal center to be studied. Treatment of the clusters with nitric oxide resulted in binding of NO to the apical iron center, generating a {FeNO}(7) moiety. As with the NO-free precursors, the three reversible redox events are localized at the iron centers distal from the NO ligand. Altering the redox state of the triiron core resulted in significant change in the NO stretching frequency, by as much as 100 cm(-1). The increased activation of NO is attributed to structural changes within the clusters, in particular, those related to the interaction of the metal centers with the interstitial atom. The differences in NO activation were further shown to lead to differential reactivity, with NO disproportionation and N2O formation performed by the more electron-rich cluster.

Spectroscopic and computational characterization of the NO adduct of substrate-bound Fe(II) cysteine dioxygenase: insights into the mechanism of O2 activation

Cysteine dioxygenase (CDO) is a mononuclear nonheme iron(II)-dependent enzyme critical for maintaining appropriate cysteine (Cys) and taurine levels in eukaryotic systems. Because CDO possesses both an unusual 3-His facial ligation sphere to the iron center and a rare Cys-Tyr cross-link near the active site, the mechanism by which it converts Cys and molecular oxygen to cysteine sulfinic acid is of broad interest. However, as of yet, direct experimental support for any of the proposed mechanisms is still lacking. In this study, we have used NO as a substrate analogue for O2 to prepare a species that mimics the geometric and electronic structures of an early reaction intermediate. The resultant unusual S = (1)/2 {FeNO}(7) species was characterized by magnetic circular dichroism, electron paramagnetic resonance, and electronic absorption spectroscopies as well as computational methods including density functional theory and semiempirical calculations. The NO adducts of Cys- and selenocysteine (Sec)-bound Fe(II)CDO exhibit virtually identical electronic properties; yet, CDO is unable to oxidize Sec. To explore the differences in reactivity between Cys- and Sec-bound CDO, the geometries and energies of viable O2-bound intermediates were evaluated computationally, and it was found that a low-energy quintet-spin intermediate on the Cys reaction pathway adopts a different geometry for the Sec-bound adduct. The absence of a low-energy O2 adduct for Sec-bound CDO is consistent with our experimental data and may explain why Sec is not oxidized by CDO.

Influence of thiolate ligands on reductive N-O bond activation. Probing the O2(-) binding site of a biomimetic superoxide reductase analogue and examining the proton-dependent reduction of nitrite

Nitric oxide (NO) is frequently used to probe the substrate-binding site of "spectroscopically silent" non-heme Fe(2+) sites of metalloenzymes, such as superoxide reductase (SOR). Herein we use NO to probe the superoxide binding site of our thiolate-ligated biomimetic SOR model [Fe(II)(S(Me(2))N(4)(tren))](+) (1). Like NO-bound trans-cysteinate-ligated SOR (SOR-NO), the rhombic S = 3/2 EPR signal of NO-bound cis-thiolate-ligated [Fe(S(Me(2))N(4)(tren)(NO)](+) (2; g = 4.44, 3.54, 1.97), the isotopically sensitive ν(NO)(ν((15)NO)) stretching frequency (1685(1640) cm(-1)), and the 0.05 Å decrease in Fe-S bond length are shown to be consistent with the oxidative addition of NO to Fe(II) to afford an Fe(III)-NO(-) {FeNO}(7) species containing high-spin (S = 5/2) Fe(III) antiferromagnetically coupled to NO(-) (S = 1). The cis versus trans positioning of the thiolate does not appear to influence these properties. Although it has yet to be crystallographically characterized, SOR-NO is presumed to possess a bent Fe-NO similar to that of 2 (Fe-N-O = 151.7(4)°). The N-O bond is shown to be more activated in 2 relative to N- and O-ligated {FeNO}(7) complexes, and this is attributed to the electron-donating properties of the thiolate ligand. Hydrogen-bonding to the cysteinate sulfur attenuates N-O bond activation in SOR, as shown by its higher ν(NO) frequency (1721 cm(-1)). In contrast, the ν(O-O) frequency of the SOR peroxo intermediate and its analogues is not affected by H-bonds to the cysteinate sulfur or other factors influencing the Fe-SR bond strength; these only influence the ν(Fe-O) frequency. Reactions between 1 and NO(2)(-) are shown to result in the proton-dependent heterolytic cleavage of an N-O bond. The mechanism of this reaction is proposed to involve both Fe(II)-NO(2)(-) and {FeNO}(6) intermediates similar to those implicated in the mechanism of NiR-promoted NO(2)(-) reduction.

Efficient transfer of either one or two dithiolene ligands from nickel to ruthenium: synthesis and crystal structures of [Ru(SCR=CPhS)(2)(PPh(3))] and [RuCl(2)(SCR=CPhS)(PPh(3))(2)] (R = Ph, H)

High yields of two different types of ruthenium dithiolene complex have been obtained by reactions that involve transfer of the dithiolene ligands from the nickel complexes [Ni(SCR=CPhS)(2)] (R = Ph, H) to [RuCl(2)(PPh(3))(3)]. At room temperature one dithiolene is rapidly transferred to yield [RuCl(2)(SCR=CPhS)(PPh(3))(2)], whereas under thermal conditions (refluxing toluene) two dithiolene ligands are incorporated to give [Ru(SCR=CPhS)(2)(PPh(3))]. The crystal structures of the ruthenium bis(dithiolene) complexes indicate that the dithiolene ligands are bonded in the monoanionic form, whereas in the monodithiolene complexes the dithioketone canonical form of the dithiolene ligand is more in evidence, as shown by the average C-S and C=C bond distances in the ligands. This is consistent with both complexes containing Ru(II) centers. The synthesis of the mixed-ligand bis(dithiolene) complex [Ru(SCH=CPhS)(S(2)C(2)Ph(2))(PPh(3))] has been achieved and it is shown that the bis(dithiolene) complexes undergo relatively slow scrambling of the dithiolene ligands in solution. The complex [Ru(SCH=CFcS)(2)(PPh(3))], containing two ferrocenyl-substituted dithiolene ligands, was also prepared, but attempts to establish the degree of electrochemical communication between them were hampered by instability and the irreversible nature of the redox processes.

Spectroelectrochemistry and DFT Analysis of a New {RuNO}n Redox System with Multifrequency EPR Suggesting Conformational Isomerism in the {RuNO}7 State

The compound [Ru(NO)(bpym)(terpy)](PF6)3, bpym = 2,2'-bipyrimidine and terpy = 2,2':6',2"-terpyridine, with a {RuNO}6 configuration (angle Ru-N-O 175.2(4) degrees ) was obtained from the structurally characterized precursor [Ru(NO2)(bpym)(terpy)](PF6), which shows bpym-centered reduction and metal-centered oxidation, as evident from EPR spectroscopy. The relatively labile [Ru(NO)(bpym)(terpy)](3+), which forms a structurally characterized acetonitrile substitution product [Ru(CH3CN)(bpym)(terpy)](PF6)2 upon treatment with CH3OH/CH3CN, is electrochemically reduced in three one-electron steps of which the third, leading to neutral [Ru(NO)(bpym)(terpy)], involves electrode adsorption. The first-two reduction processes cause shifts of nu(NO) from 1957 via 1665 to 1388 cm(-1), implying a predominantly NO-centered electron addition. UV-vis-NIR Spectroscopy shows long-wavelength ligand-to-ligand charge transfer absorptions for [Ru(II)(NO(-I))(bpym)(terpy)]+ in the visible region, whereas the paramagnetic intermediate [Ru(NO)(bpym)(terpy)](2+) exhibits no distinct absorption maximum above 309 nm. EPR spectroscopy of the latter at 9.5, 95, and 190 GHz shows the typical invariant pattern of the {RuNO}7 configuration; however, the high-frequency measurements at 4 and 10 K reveal a splitting of the g1 and g2 components, which is tentatively attributed to conformers resulting from the bending of RuNO. DFT calculations support the assignments of oxidation states and the general interpretation of the electronic structure.