Redox-Induced Solid−Solid Phase Transformation of TCNQ Microcrystals into Semiconducting Ni[TCNQ]2(H2O)2 Nanowire (Flowerlike) Architectures: A Combined Voltammetric, Spectroscopic, and Microscopic Study

Increased Crystallization of CuTCNQ in Water/DMSO Bisolvent for Enhanced Redox Catalysis

Controlling the kinetics of CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) crystallization has been a major challenge, as CuTCNQ crystallizing on Cu foil during synthesis in conventional solvents such as acetonitrile simultaneously dissolves into the reaction medium. In this work, we address this challenge by using water as a universal co-solvent to control the kinetics of crystallization and growth of phase I CuTCNQ. Water increases the dielectric constant of the reaction medium, shifting the equilibrium toward CuTCNQ crystallization while concomitantly decreasing the dissolution of CuTCNQ. This allows more CuTCNQ to be controllably crystallized on the surface of the Cu foil. Different sizes of CuTCNQ crystals formed on Cu foil under different water/DMSO admixtures influence the solvophilicity of these materials. This has important implications in their catalytic performance, as water-induced changes in the surface properties of these materials can make them highly hydrophilic, which allows the CuTCNQ to act as an efficient catalyst as it brings the aqueous reactants in close vicinity of the catalyst. Evidently, the CuTCNQ synthesized in 30% (v/v) water/DMSO showed superior catalytic activity for ferricyanide reduction with 95% completion achieved within a few minutes in contrast to CuTCNQ synthesized in DMSO that took over 92 min.

Design and fabrication of green and sustainable vapochromic cellulose fibers embedded with natural anthocyanin for detection of toxic ammonia

Exposure to colorless ammonia gas may lead to damage in human organs or even death. Herein, we describe facile fabrication of an environmentally-friendly, portable, reversible, and sensitive solid-state colorimetric cellulose (Cell)/anthocyanin (Anth) vapochromic sensor that exhibits instant visual color change to both gaseous and aqueous phases of ammonia. The naturally occurring anthocyanin can be easily extracted from the red-cabbage plant and applied as a direct dyestuff onto viscose fibers in the presence of potassium aluminum sulfate as mordant to generate nanoparticles of mordant/anthocyanin coordinated complex. Thus, upon exposure to aqueous ammonia, an instant color change of the smart (Cell-Anth) diagnostic assays, from purple to colorless, was noted and quantitatively probed via both CIE Lab coordinates and UV-Vis spectral measurements. Importantly, the fabricated (Cell-Anth) viscose fabric showed rapid responses, fraction of second, with a good limit of detection (LOD) in the range of 200-1200 mg L^-1. This receptor also demonstrated ratiometric changes in the UV-Vis absorbance spectra, giving a hypsochromic shift from 611 to 375 nm upon increasing the total content of ammonia in an aqueous media. The morphologies of Cell-Anth fabrics as well as particle size of the generated mordant/dye complex on the fabric surface have been characterized by transmission electron microscopic (TEM), scan electron microscopy (SEM), energy-dispersive X-ray patterns (EDX) and Fourier-transform infrared spectroscopic (FT-IR). The comfortability of the dyed cellulose fibers was also investigated in terms of their bend length, air-permeability and colorfastness properties. Significantly, the present study offers a promising onsite vapochromic device that enables detection of ammonia in either aqueous or gas phase in various environments and products.

A new platform for development of photosystem I based thin films with superior photocurrent: TCNQ charge transfer salts derived from ZIF-8

The transmembrane photosynthetic protein complex Photosystem I (PSI) is highly sought after for incorporation into biohybrid photovoltaic devices due to its remarkable photoactive electrochemical properties, chiefly driving charge separation with ∼1 V potential and ∼100% quantum efficiency. In pursuit of these integrated technologies, three factors must be simultaneously tuned, namely, direct redox transfer steps, three-dimensional coordination and stabilization of PSI aggregates, and interfacial connectivity with conductive pathways. Building on our recent successful encapsulation of PSI in the metal-organic framework ZIF-8, herein we use the zinc and imidazole cations from this precursor to form charge transfer complexes with an extremely strong organic electron acceptor, TCNQ. Specifically, the PSI-Zn-H2mim-TCNQ charge transfer salt complex was drop cast on ITO to form dense films. Subsequent voltammetric cycling induced cation exchange and electrochemical annealing of the film was used to enhance electron conductivity giving rise to a photocurrent in the order of 15 μA cm-2. This study paves the way for a myriad of future opportunities for successful integration of this unique class of charge transfer salt complexes with biological catalysts and light harvesters.

Electrochemically Directed Synthesis of Cobalt(II) and Nickel(II) TCNQF21–/2– Coordination Polymers: Solubility and Substituent Effects in the TCNQFn (n=0, 1, 2, 4) Series of Complexes

The reversible diffusion controlled cyclic voltammetry for the reduction of TCNQF­n0/1–/2– (where n=0, 1, 2, 4) changes significantly on addition of Co2+ and Ni2+ transition metal ions (M2+) because the kinetics associated with electrocrystallisation of the resulting coordination polymers [M(TCNQF2)2(H2O)2] and [M(TCNQF2)] are rapid on the voltammetric time scale. The voltammetry of solutions containing M2+ and TCNQF­2 was undertaken in acetonitrile (0.1M Bu4NPF6) at both GC and ITO electrodes. New one electron reduced TCNQF2 materials prepared via electrochemically directed synthesis were shown to have the formula [M(TCNQF2)2(H2O)2], assessed by vibrational (IR and Raman) spectroscopy, elemental analysis and thermogravimetric analysis. The solubility of [Ni(TCNQF2)2(H2O)2] (Ksp=8.29×10−11 M3) was significantly higher than the [Co(TCNQF2)2(H2O)2] (Ksp=1.43×10−11M3). Cyclic voltammetric data suggest the electrocrystallisation of two phases of [Ni(TCNQF2)2(H2O)2] occurs, which is not evident for [Co(TCNQF2)2(H2O)2]. Electrocrystallisation of the highly insoluble [M(TCNQF2)] was achieved at low M2+ and TCNQF2 concentrations. A comparison with published data on the voltammetry of TCNQF­n (n=0, 1, 2 and 4) for the series of TCNQF­n (n=0, 1, 2 and 4) containing M2+ is provided. An assessment of the electronic impact of the fluorine substituent of the underlying redox reactions also is established. Predictions are made for the voltammetric behaviour expected for the other transition metal cations with reduced TCNQFn derivatives.

X4TCNQ2− dianions: versatile building blocks for supramolecular systems

A new synthetic approach has led to the incorporation of TCNQ and F₄TCNQ dianions into a wide variety of structures.

Structural, Spectroscopic, and Electrochemical Characterization of Semi-Conducting, Solvated [Pt(NH3)4](TCNQ)2·(DMF)2 and Non-Solvated [Pt(NH3)4](TCNQ)2

The demand for catalysts that are highly active and stable for electron-transfer reactions has been boosted by the discovery that [Pt(NH3)4](TCNQF4)2 (TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) is an efficient catalyst. In this work, we prepare and characterize the two related [Pt(NH3)4]2+ complexes, [Pt(NH3)4](TCNQ)2·(DMF)2 (1) and [Pt(NH3)4](TCNQ)2 (2). Reaction of [Pt(NH3)4](NO3)2 with LiTCNQ in a mixed solvent (methanol/dimethylformamide, 4 : 1 v/v) gives [Pt(NH3)4](TCNQ)2·(DMF)2 (1), whereas the same reaction in water affords [Pt(NH3)4](TCNQ)2 (2). 2 has been previously reported. Both 1 and 2 have now been characterized by single-crystal X-ray crystallography, Fourier-transform (FT)IR, Raman and UV-vis spectroscopy, and electrochemistry. Structurally, in 1, the TCNQ1− anions form infinite stacks with a separation between adjacent anions within the stack alternating between 3.12 and 3.42 Å. The solvated structure 1 differs from the non-solvated form 2 in that pairs of TCNQ1− anions are clearly displaced from each other. The conductivities of pressed pellets of 1 and 2 are both in the semi-conducting range at room temperature. 2 can be electrochemically synthesized by reduction of a TCNQ-modified electrode in contact with an aqueous solution of [Pt(NH3)4](NO3)2 via a nucleation growth mechanism. Interestingly, we discovered that 1 and 2 are not catalysts for the ferricyanide and thiosulfate reaction. Li+ and tetraalkylammonium salts of TCNQ1−/2− and TCNQF41−/2− were tested for potential catalytic activity towards ferricyanide and thiosulfate. Only TCNQF41−/2− salts were active, suggesting that the dianion redox level needs to be accessible for efficient catalytic activity and explaining why 1 and 2 are not good catalysts. Importantly, the origin of the catalytic activity of the highly active [Pt(NH3)4](TCNQF4)2 catalyst is now understood, enabling other families of catalysts to be developed for important electron-transfer reactions.

Three alkaline-earth metal complexes with 3D networks constructed from a 7,7,8,8-tetracyanoquinodimethane ligand: synthesis, structure and electrochemical properties

Three new 7,7,8,8-tetracyanoquinodimethane (TCNQ) alkaline-earth metal complexes, namely {[M2(TCNQ)3(H2O)6]·TCNQ}n (M = Ca (1), Sr (2) and Ba (3)) have been synthesized by salt elimination reactions. X-ray crystallographic analysis reveals that complexes 1, 2 and 3 are isomorphic featuring a unique 3D structure. Cyclic and differential pulse voltammograms for complexes 1-3 show a reversible one-electron oxidation and a reversible one-electron reduction within the electrochemical window of CH3CN. Their electrochemical HOMO-LUMO gap and reversibility are examined.

Two-step electrochemically directed synthesis of Pr4N(TCNQ)n (n=1, 2): preparation, structure, and properties of a magnetically isolated dimer and a quasi-one-dimensional chain

Solid-state electrochemistry of a tetracyanoquinodimethane (TCNQ)-modified electrode in contact with a tetrapropylammonium cation (Pr(4)N(+)) electrolyte showed two electron-transfer steps to give Pr(4)N(TCNQ)(2) (1) and Pr(4)N(TCNQ) (2) rather than the traditional one-electron step to directly give Pr(4)N(TCNQ). Two thermodynamically stable Pr(4)N(+)-TCNQ stoichiometries, 1 and 2, were synthesized and characterized. The degree of charge transfer (ρ) calculated from the crystal structure is -0.5 for the TCNQ moieties in 1 and -1.0 for those in 2. Raman spectra for Pr(4)N(TCNQ)(2) show only one resonance for the extracyclic C=C stretching at 1423 cm(-1), which lies approximately midway between that of TCNQ at 1454 cm(-1) and TCNQ(-) at 1380 cm(-1). Both the magnetic susceptibility and EPR spectra are temperature-dependent, with a magnetic moment close to that for one unpaired electron per (TCNQ)(2) unit in 1, whereas 2 is almost diamagnetic. Pressed discs of both complexes show conductivity (1-2×10(-5) S cm(-1)) in the semiconductor range. For 1, the position of zero current for the steady-state voltammograms implies 50% of TCNQ(-) and 50% TCNQ(0) is present in solution, thereby supporting a dissociation of (TCNQ)(2)(-) in solution, but is indicative of only TCNQ(-) being present for 2.