Cyano-bridged Homodinuclear Copper(II) Complexes

Antisymmetric Spin Exchange in a μ-1,2-Peroxodicopper(II) Complex with an Orthogonal Cu-O-O-Cu Arrangement and S = 1 Spin Ground State Characterized by THz-EPR

A unique type of Cu₂/O₂ adduct with orthogonal (close to 90°) Cu-O-O-Cu arrangement has been proposed for initial stages of O₂ binding at biological type III dicopper sites, and targeted ligand design has now allowed us to emulate such an adduct in a pyrazolate-based μ-η¹ :η¹-peroxodicopper(II) complex (2) with Cu-O-O-Cu torsion φ of 87°, coined ^⊥ P intermediate. Full characterization of 2, including X-ray diffraction (d _O-O = 1.452 Å) and Raman spectroscopy (ν̃_O-O = 807 cm^-1), completes a series of closely related Cu₂/O₂ intermediates featuring μ-η¹ :η¹-peroxodicopper(II) cores with φ ranging from 55° (A, cis-peroxo ^C P; Brinkmeier A.et al., J. Am. Chem. Soc.2021, 143, 10361) via 87° (2, ^⊥ P type) up to 104° (B, approaching trans-peroxo ^T P; Kindermann N.et al., Angew. Chem., Int. Ed.2015, 54, 1738). SQUID magnetometry revealed ferromagnetic interaction of the Cu^II ions and a triplet (S _t = 1) ground state in 2. Frequency-domain THz-EPR has been employed to quantitatively investigate the spin systems of 2 and B. Magnetic transitions within the triplet ground states confirmed their substantial zero-field splittings (ZFS) suggested by magnetometry. Formally forbidden triplet-to-singlet transitions at 56 (2) and 157 cm^-1 (B), which are in agreement with the exchange coupling strengths J _iso inferred from SQUID data, are reported for the first time for coupled dicopper(II) complexes. Rigorous analysis by spin-Hamiltonian-based simulations attributed the corresponding nonzero transition probabilities and the ZFS to substantial antisymmetric (Dzyaloshinskii-Moriya) exchange d and provided robust values and orientations for the d , J , and g tensors. These interactions can be correlated with the Cu-O-O-Cu geometries, revealing a linear increase of J _iso with the Cu-O-O-Cu torsion and a strong linear decrease with the Cu-O-O angle. Relevance of the ^⊥ P intermediate for O₂ activation at type III dicopper sites and a potential role of antisymmetric exchange in the concomitant intersystem crossing are proposed.

How to create giant Dzyaloshinskii-Moriya interactions? Analytical derivation and ab initio calculations on model dicopper(II) complexes

This paper is a theoretical "proof of concept" on how the on-site first-order spin-orbit coupling (SOC) can generate giant Dzyaloshinskii-Moriya interactions in binuclear transition metal complexes. This effective interaction plays a key role in strongly correlated materials, skyrmions, multiferroics, and molecular magnets of promising use in quantum information science and computing. Despite this, its determination from both theory and experiment is still in its infancy and existing systems usually exhibit very tiny magnitudes. We derive analytical formulas that perfectly reproduce both the nature and the magnitude of the Dzyaloshinskii-Moriya interaction calculated using state-of-the-art ab initio calculations performed on model bicopper(II) complexes. We also study which geometrical structures/ligand-field forces would enable one to control the magnitude and the orientation of the Dzyaloshinskii-Moriya vector in order to guide future synthesis of molecules or materials. This article provides an understanding of its microscopic origin and proposes recipes to increase its magnitude. We show that (i) the on-site mixings of 3d orbitals rule the orientation and magnitude of this interaction, (ii) increased values can be obtained by choosing more covalent complexes, and (iii) huge values (∼1000 cm^-1) and controlled orientations could be reached by approaching structures exhibiting on-site first-order SOC, i.e., displaying an "unquenched orbital momentum."

Exchange couplings and quantum phases in two dissimilar arrays of similar copper dinuclear units

X-ray structure and EPR spectra of two dinuclear copper compounds allow us to study spin entanglement and quantum phase transitions. Their different 3D arrays and interdinuclear exchange paths produce important effects.

Ultrasensitive Optical Chemosensor for Cu(II) Detection

Herein, the main objective of this research is to design and synthesize a novel optical chemosensor, 2,6-Bis(4-dimethylaminophenyl)-4-(dicyanomethylene)-cyclohexane-1,1-dicarbo-nitrile (BDC), for detection of one of the most significant metal ions Cu(II). This novel fluorescent chemosensor exhibits unique optical properties with large Stokes shift (about 170 nm) approximately. The fluorescence and UV–vis absorption performance among the BDC probe and Cu(II) ions were examined in 1:9 (v/v) methanol–HEPES buffer (pH = 7.2) solution. Also, BDC displays high selectivity for Cu(II) concerning other cations. Moreover, this probe provides high selectivity and sensitivity based on their fluorescence properties and recognition abilities within a detection limit of the Cu(II) contents (LOD 2.3 x 10⁻⁷ M). The suggested mechanism of BDC sensor is attributed to the chelation process with Cu(II), to establish a 1:1 metal-ligand ratio complex with a binding constant (K_bind = 7.16 x 10⁴ M⁻¹). The detection process is accompanied by quenching the main emission peak of the BDC at 571 nm. All the experimental data were collected to investigate the effects of several important parameters such as reversibility and the concentration limits. Besides, we study the interference of various metal ions on selectivity and detection capacity of this significant Cu (II) ion. This novel chemosensor shows ultrasensitive, fast tracing of Cu(II) in the physiological pH range (pH 7.2) and therefore may propose a novel promising method for the investigation of the biological functions of Cu(II) in living cells.

Copper cyanide polymers with controllable dimensions modulated by rigid and flexible bis-(imidazole) ligands: synthesis, crystal structure and fluorescence properties

Five controllable dimensions copper cyanide polymers have been synthesized by adjusting the steric configurations of imidazole ligands, which exhibit certain thermal stability and fluorescence properties.

Developing a magnetic metal organic framework of copper bearing a mixed azido/butane-1,4-dicarboxylate bridge: magnetic and gas adsorption properties

A magnetic metal organic framework {[Cu(but-1,4-dc)0.5(N3)(H2O)]·H2O}n (MFUM-1(Cu)) (but-1,4-dc = butane-1,4-dicarboxylate) was synthesized and characterized structurally and magnetically. In MFUM-1(Cu), each CuII ion has a distorted octahedral geometry with an obvious Jahn-Teller distortion, where the coordination environment is composed of mixed EO-azido/aliphatic based carboxylate/H2O threefold bridges. These bridges extend the structure of MFUM-1(Cu) in two dimensions by covalent connectivity and form square-shaped channels. Also, a study was done to determine the effectiveness of sonochemical synthesis for the preparation of nano-sheets of MFUM-1(Cu) and subsequently the influence of particle size on physical properties such as magnetic behavior and thermal stability. The particles were characterized by elemental analyses, infrared spectroscopy (IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and powder X-ray diffraction (PXRD) analyses. The effects of parameters such as concentration, solvent, and reaction time on the size distribution, morphology, and yield of product were carefully studied. The magnetic properties of MFUM-1(Cu) and corresponding nano-structure were examined which indicated metamagnetism with strong intrachain ferromagnetic coupling versus the weak interchain antiferromagnetic coupling. Finally, the application of MFUM-1(Cu) in the separation of carbon dioxide from nitrogen and also from methane was theoretically investigated. High calculated selectivity of CO2 over N2 and CH4 reveals the potential application of MFUM-1(Cu) in practical systems of gas separation.

Copper(II) Complexes with Bulky N-Substituted Diethanolamines: High-Field Electron Paramagnetic Resonance, Magnetic, and Catalytic Studies in Oxidative Cyclohexane Amidation

The novel coordination compounds [Cu₂(H ^tBuDea)₂(OAc)₂] (1) and [Cu₂(H ⁿBuDea)₂Cl₂]· nH₂O (2) have been prepared through the reaction of the respective copper(II) salts with N- tert-butyldiethanolamine (H₂ ^tBuDea, for 1) or N-butyldiethanolamine (H₂ ⁿBuDea, for 2) in methanol solution. Crystallographic analysis reveals that, in spite of the common binuclear {Cu₂(μ-O)₂} core, the supramolecular structures of the complexes are drastically different. In 1 binuclear molecules are linked together by H-bonds into 1D chains, while in 2 the neighboring pairs of binuclear molecules are H-bonded, forming tetranuclear aggregates. Variable-temperature (1.8-300 K) magnetic susceptibility measurements of 1 and 2 show a dominant antiferromagnetic behavior. Both complexes are also studied by HF-EPR spectroscopy. While the interaction between Cu(II) centers in 1 can be described by a single coupling constant J = 130.1(3) cm^-1 (using H = JS₁ S₂), the crystallographically different {Cu₂(μ-O)₂} pairs in 2 are expected exchange from ferro- to antiferromagnetic behavior (with J ranging from -32 to 110 cm^-1, according to DFT calculations). Complexes 1 and 2 act as catalysts in the amidation of cyclohexane with benzamide, employing ^tBuOO ^tBu as oxidant. The maximum achieved conversion of benzamide (20%, after 24 h reaction time) was observed in the 1/ ^tBuOO ^tBu system. In the cases of ^tBuOO(O)CPh or ^tBuOOH oxidants, no significant amidation product was observed, while for ^tBuOO(O)CPh, the oxidative dehydrogenation of cyclohexane occurred, giving cyclohexene, to afford the allylic ester (cyclohex-2-en-1-yl benzoate) as the main reaction product.

Bispidines for radiopharmaceuticals

Radiometal based radiopharmaceuticals for imaging and therapy require selective ligands (bifunctional chelators, BFCs) that form metal complexes, which are inert against trans-chelation under physiological conditions, linked to a biological vector, directing them to the targeted tissue. Bispidine ligands with a very rigid backbone and widely variable donor sets are reviewed as an ideal class of BFCs, and recent applications are discussed.

Copper-Bispidine Complexes: Synthesis and Complex Stability Study

A new series of dicarboxylic derivatives of bispidines have been synthesized to develop novel copper(II) complexes suitable as imaging agents for positron emission tomography. For characterization purposes, copper complexes of bispidines were synthesized in the pure form and in quantitative yields by neutralization of ligands with malachite. The formation of complexes and their stoichiometries were studied by potentiometric titration, cyclic voltammetry, and spectroscopic methods. The stability constants were found to be fairly suitable for copper cation fixation inside dianionic chelate molecules.

Synthesis and transition metal coordination chemistry of a novel hexadentate bispidine ligand

With the hexadentate bispidine ligand, the Cu^II and Fe^II (red) complexes are hexacoordinated with a semi-coordinated py4, the Mn^II complex (green) is heptacoordinated.

Ferro- and antiferromagnetic coupling in a chlorido-bridged, tetranuclear Cu(ii) complex

A binuclear complex of copper(ii) chloride with a heptadentate bispidine-like ligand undergoes dimerisation in the solid state involving chloride bridging and leading to both ferro- and antiferromagnetic coupling of the Cu(ii) centres.