Four-coordinate organoboron compounds with a π-conjugated chelate ligand for optoelectronic applications

Boron Complexes with Propiolamidinato Ligands: Synthesis, Structure, and Photophysical Properties

Two series of boron derivatives with propiolamidinato ligands, [BPh2{C(C≡CAr)(NR)2}] (Ar = Ph, p-MeOPh, p-FPh, p-Me2NPh, or phen; R = iPr or p-tolyl), were synthesized and structurally characterized. The corresponding propiolamidine (or propargylamidine) proligands have been obtained through sustainable methods. One is the catalytic hydroalkynylation of diisopropylcarbodiimide with different terminal alkynes, using simple ZnEt2 as a precatalyst. Alternatively, to obtain propiolamidines with aromatic groups on the nitrogen atoms, the formation of lithiated derivatives of terminal alkynes by reaction with n-BuLi in air and at room temperature, and subsequent addition to the di-p-tolylcarbodiimide, under the same conditions and using 2-MeTHF as a sustainable solvent, has been used for the first time. After reaction with BPh3, the corresponding boron amidinates were obtained, which are emissive in the solution state. The influence of the different substituents introduced into the ligands on the photophysical properties of the boron compounds has been studied. One of the obtained compounds can be used as a ratiometric fluorescent pH sensor in the acidic range.

Direct C-H electrophilic borylation with (C6F5)2B-NTf2 to generate B-N dibenzo[a,h]pyrenes

The borylation of aryl substituted pyridines is an effective way of preparing B-N doped conjugated organic frameworks. Trihaloborane Lewis acids are often employed for this protocol, and may require further functionalization to replace the remaining halides on boron. We report a new, fully characterized, electrophilic borylating agent, (C6F5)2B(κ2-NTf2), that smoothly incorporates a -B(C6F5)2 unit into the model substrate 2-phenylpyridine. To demonstrate its utility in preparing more complex B-N doped structures, we use it to prepare seven examples of the 6a,13a-diaza-7,14-dibora-dibenzo[a,h]pyrene framework, with substituents of varying donor properties. The structural, redox, and photophysical properties of this new family of B-N doped polycyclic hydrocarbon compounds were probed experimentally and computationally.

Difluoroboron Complexes Based on Benzimidazole-Phenolates as Blue Emitters

Novel four-coordinated boron complexes (1-5) were synthesized via a reaction between BF3·CH3OH and benzimidazole-phenolate ligands (L1-L5), which are N,O-donors. These complexes exhibit intense blue emission in the solution and solid states accompanied by notable fluorescence quantum yields (ΦF). The study of the structure-property relation, through theoretical and experimental approaches, revealed a distinctive trend where compounds incorporating electron-donating substituents (methyl and ethoxy groups) in the phenolate moiety manifest shifts in emission wavelengths across the blue spectrum, concomitant with an increase in ΦF. Furthermore, the incorporation of an aromatic ring into the benzimidazole moiety considerably intensifies the rate of radiative relaxation from excited states. Notably, in the solid phase, either as a crystalline powder or loaded into polymer films, these modified complexes maintain or even surpass ΦF values observed in molecular solutions, ranging from 0.18 to 0.57, depending on the substitution. This characteristic makes these compounds attractive for applications in optoelectronics. All of the compounds were characterized using 1H, 13C, 11B, and 19F NMR, elemental analysis, and the molecular structures were corroborated through single-crystal X-ray diffraction analysis. Computational calculations via time-dependent density functional theory further elucidate the tunability of optical bandgaps through group substitution on ligands, aligning well with experimental observations.

Luminescent hexagonal microtubes prepared through water-induced self-assembly of a polymorphic organoboron compound: formation mechanism and waveguide behaviour

Tetra-coordinated organoboron (TCOB) compounds are promising candidates for developing high-performance optical devices due to their excellent optoelectronic performance. Fabricating TCOB-based nanomaterials of controlled and defined morphology through rapid and easy-to-execute protocols can significantly accelerate their practical utility in the aforesaid applications. Herein, we report water-induced self-assembly (WISA) to convert a polymorphic TCOB complex (HNBI-B, derived from a 2-(2'-hydroxy-naphthyl)-benzimidazole precursor) into two unique nanomorphologies viz. nanodiscoids (NDs) and fluorescent microtubes with hexagonal cross-sections (HMTs). Detailed electron microscopic investigations revealed that oriented assembly and fusion of the initially formed NDs yield the blue emissive HMTs (SSQY = 26.7%) that exhibited highly promising photophysical behaviour. For example, the HMTs outperformed all the crystal polymorphs of HNBI-B obtained from CHCl3, EtOAc and MeOH in emissivity and also exhibited superior waveguide behaviour, with a much lower optical loss coefficient α' = 1.692 dB mm-1 compared to the rod-shaped microcrystals of HNBI-B obtained from MeOH (α' = 1.853 dB mm-1). Thus, this work reports rapid access to high performance optical nanomaterials through WISA, opening new avenues for creating useful nanomaterial morphologies with superior optical performance.

Spiroborate-Based Host Materials with High Triplet Energies and Ambipolar Charge-Transport Properties

Organic light-emitting diodes (OLEDs) receive considerable attention because of their commercial use in flat panel displays. Herein, highly efficient spiroborate-based host materials are reported for use in blue OLEDs. Our designed spiroborates (SBOX) were simple to synthesize and exhibited high triplet excitation energies, narrow S-T gaps, and balanced charge carrier mobilities. A blue OLED containing one of the designed spiroborates, SBON, as a host exhibited a high external quantum efficiency (27.6 %) and low turn-on voltage (3.7 V) compared to those observed using 3,3'-di(9H-carbazol-9-yl)-1,1'-biphenyl (17.6 % and 4.5 V, respectively), indicating their potential as host materials in OLEDs.

Multicomponent synthesis of chromophores – The one-pot approach to functional π-systems

Multicomponent reactions, conducted in a domino, sequential or consecutive fashion, have not only considerably enhanced synthetic efficiency as one-pot methodology, but they have also become an enabling tool for interdisciplinary research. The highly diversity-oriented nature of the synthetic concept allows accessing huge structural and functional space. Already some decades ago this has been recognized for life sciences, in particular, lead finding and exploration in pharma and agricultural chemistry. The quest for novel functional materials has also opened the field for diversity-oriented syntheses of functional π-systems, i.e. dyes for photonic and electronic applications based on their electronic properties. This review summarizes recent developments in MCR syntheses of functional chromophores highlighting syntheses following either the framework forming scaffold approach by establishing connectivity between chromophores or the chromogenic chromophore approach by de novo formation of chromophore of interest. Both approaches warrant rapid access to molecular functional π-systems, i.e. chromophores, fluorophores, and electrophores for various applications.

Synthesis and Properties of B4 N4 -Heteropentalenes Fused with Polycyclic Hydrocarbons

Hybrid molecules of π-conjugated carbon rings and BN-heterocyclic rings (h-CBNs) fused with each other have been a rare class of compounds due to the limited availability of their synthetic methods. Here we report the synthesis of new h-CBNs featuring a B₄ N₄ -heteropentalene core and polycyclic aromatic hydrocarbon wings. Using 1,2-azaborinine derivatives as a building block, we developed a rational synthetic protocol that allows the formation of a B₄ N₄ ring in a stepwise manner, resulting in the fully fused ABA-type triblock molecules. Thus, three derivatives of 1 bearing naphthalene (1_Naph ), anthracene (1_Anth ), or phenanthrene (1_Phen ) wings fused with the B₄ N₄ core were synthesized and characterized. Among them, 1_Phen , which displays the highest triplet-state energy, was found to serve a host material for phosphorescent OLED devices, for which a maximum external quantum efficiency of 13.7 % was recorded. These findings may promote the synthesis of various types of h-CBNs aiming at new properties arising from the synergy of two different π-electronic systems.

Lamellar assembly and nanostructures of amphiphilic boron(iii) diketonates through suitable non-covalent interactions

Cooperative assemblies of amphiphilic boron(iii) diketonate compounds, which are found to be driven by the formation of non-covalent π–π and hydrophobic interactions in THF–water solution, result in the construction of nanosheet of lamellar packing.

External environment sensitive circularly polarized luminescence properties of a chiral boron difluoride complex

A chiral Schiff-base boron difluoride complex bearing a diethylamino group was synthesized. Its photophysical properties were investigated and compared with those of its non-substituted analogue. The complex was found to exhibit solvatofluorochromism with bluish-white emission in moderately polar solvents and intense blue emission in nonpolar solvent. Circularly polarized luminescence (CPL) properties were also examined and it was found that the absolute value of the luminescence dissymmetry factor (g lum) increases significantly in the KBr-dispersed pellet state compared to the solution state. Notably, CPL intensity of the complex enhanced approximately three times upon addition of CH3SO3H in CH2Cl2. Density functional theory (DFT) calculations were conducted to further understand the photophysical properties.

Two-in-One Approach toward White-Light Emissions of Dimeric B/N Lewis Pairs by Tuning the Ortho-Substitution Effect

A new family of dimeric B/N Lewis pairs with sterically tunable substitutions has been accomplished using the Two-in-One design strategy. Their structures are characteristic of doubly B/N-containing cores, and the electronic interactions between B and N centers can be modulated by the steric effects of ortho-substitutions from methyl groups. Interestingly, unique white-light emissions were achieved for 2M'2BNM and 1M2BNM, ascribed to the integration of two triarylborane species (B_sp²- and B_sp³-hybridization) into one single molecule.

Multi-colour circularly polarized luminescence properties of chiral Schiff-base boron difluoride complexes

A series of chiral Schiff-base boron difluoride complexes was synthesized and their photophysical properties were examined. These complexes showed multi-colour (blue, yellow and red) photoluminescence in solution and in the solid state with good emission quantum yield (Φ) depending on the π-systems of the ligands. The chiral complexes exhibited circularly polarized luminescence (CPL) with an absolute luminescence dissymmetry factor (g_lum) of up to the 1.3 × 10^-3 in solution and 1.9 × 10^-2 in the drop-cast film state. Density functional theory (DFT) and time-dependent (TD) DFT calculations were conducted to further understand the photophysical properties.

Four-Coordinate Monoboron Complexes with 8-Hydroxyquinolin-5-Sulfonate: Synthesis, Crystal Structures, Theoretical Studies, and Luminescence Properties

8-Hydroxyquinolin-5-sulfonic acid (8HQSA) was combined with 3-pyridineboronic acid (3PBA) or 4-pyridineboronic acid (4PBA) to give two zwitterionic monoboron complexes in crystalline form. The compounds were characterized by elemental analysis, single-crystal X-ray diffraction studies, and IR, 1H NMR, UV-Visible, and luminescence spectroscopy. The analyses revealed compounds with boron atoms adopting tetrahedral geometry. In the solid state, the molecular components are linked by charge-assisted (B)(O-H···−O(S) and N+-H···O(S) hydrogen bonds aside from C-H···O contacts and π···π interactions, as shown by Hirshfeld surface analyses and 2D fingerprint plots. The luminescence properties were characterized in terms of the emission behavior in solution and the solid state, showing emission in the bluish-green region in solution and large positive solvatofluorochromism, caused by intramolecular charge transfer. According to TD-DFT calculations at the M06-2X/6-31G(d) level of theory simulating an ethanol solvent environment, the emission properties are originated from π-π * and n-π * HOMO-LUMO transitions.

Isomer Selective Thermosalience and Luminescence Switching in Organic Crystals

Organic crystals that respond to external stimuli are interesting for the design of smart materials. Here, we show that molecular engineering can transform simple naphthalidenimine-boron complexes─known for their exciting photophysical properties─into functional materials that exhibit thermosalience and thermal-luminescence switching. Detailed crystallographic and spectroscopic investigations revealed the role of subtle molecular parameters in deciphering charge-transfer interactions, which in turn imparted dynamic properties to the crystals. The simultaneous observation of thermally induced jumping and luminescence switching makes these crystals ideal for optoelectronic applications.

Synthesis, photophysical, electrochemical, and non-linear optical properties of triaryl pyrazole based B-N coordinated boron compounds

We report here a set of triaryl pyrazole based B-N coordinated boron compounds ( 11 - 17 ) synthesized by electrophilic aromatic borylation strategy. All the pyrazole boron compounds were thoroughly characterized using multinuclear NMR spectroscopy, LCMS, and single crystal X-ray diffraction analysis (for 12 - 17 ). The photoluminescence measurements of 11 - 17 revealed that the emission peak maxima were tuned based on the substitution on Nphenyl. The photophysical and electrochemical properties were further supported by theoretical calculations. Z-scan based investigations at 515 nm pump wavelength showed that B-N coordination led to enhancement of nonlinear absorption (two-photon absorption (TPA)) in these compounds if an electron deficient moiety is attached. It has also been observed that an appropriate choice of moiety allows to optimally maneuver the molecular polarizability of the π-system and consequently, assists in controlling the third-order nonlinear optical response.

2,2'-Bipyridine derived doubly B ← N fused bisphosphine-chalcogenides, [C5H3N(BF2){NCH2P(E)Ph2}]2 (E = O, S, Se): tuning of structural features and photophysical studies

2,2'-Bipyridine based bisphosphine [C₅H₃N{N(H)CH₂PPh₂}]₂ (1) and its bischalcogenide derivatives [C₅H₃N{N(H)CH₂P(E)Ph₂}]₂ (2, E = O; 3, E = S; 4, E = Se) were synthesized, and further reacted with BF₃·Et₂O/Et₃N to form doubly B ← N fused compounds [C₅H₃N(BF₂){NCH₂P(E)Ph₂}]₂ (5, E = O; 6, E = S; 7, E = Se) in excellent yields. The influence of the PE bonds on the electronic properties of the doubly B ← N fused systems and their structural features were investigated in detail, supported by extensive experimental and computational studies. Compound 6 exhibited a very high quantum yield of ϕ = 0.56 in CH₂Cl₂, whereas compound 7 showed a least quantum yield of ϕ = 0.003 in acetonitrile. Density functional theory (DFT) calculations demonstrated that the LUMO/HOMO of compounds 5-7 mostly delocalized over the entire π-conjugated frameworks. The involvement of PE bonds in the HOMO energy level of these compounds follows the order: PO < PS < PSe. Time-correlated single photon counting (TCSPC) experiments of compounds 5-7 revealed the singlet lifetime of 4.26 ns for 6, followed by 4.03 ns for 5 and a lowest value of 2.18 ns (τ₁) and 0.47 ns (τ₂) with a double decay profile for 7. Our findings provide important strategies for the design of highly effective B ← N bridged compounds and tuning their photophysical properties by oxidizing phosphorus with different chalcogens. Compounds 5 and 6 have been employed as green emitters (λ_em = 515 nm) in fluorescent organic light-emitting diodes (OLEDs). For compound 5, doped into the poly(9-vinylcarbazole) (PVK) matrix with 5 wt% doping concentration, nearly 90 Cd m^-2 luminance with 0.022% external quantum efficiency (EQE) was achieved. The best performance was observed for compound 6 doped into PVK by 1 wt% having a maximum luminance of 350 Cd m^-2 and a similar EQE value.

Photochromic dithienylethene-containing four-coordinate boron(III) compounds with a spirocyclic scaffold

A new series of four-coordinate boron compounds bearing a photochromic dithienylethene-containing C^C ligand and an ancillary N^C ligand have been successfully designed and synthesised. These compounds exhibit reversible photochromism upon photoexcitation with percentage conversions of 71-96% and readily tuneable photocycloreversion quantum yields by convenient modification of the ancillary ligand to turn on the thermally activated upconversion from the lower-lying unreactive excited state to the higher-lying photoreactive excited state.

Synthesis and Characterization of Far-Red Emissive Boron-Based Triads Showing Large Stokes Shifts: Optical, TRANES, and Electrochemical Studies

Herein, we report the design and synthesis of far-red emissive boryl-thiophene-BODIPY triads 1-3. The π-conjugation length and electronic communication between borane and BODIPY moieties are tuned by judiciously varying the size of the oligothiophene spacer in these triads (1, terthiophene; 2, quarterthiophene; and 3, pentathiophene). Conjugates 1-3 showed intriguing triple emissions in the blue to far-red regions. Detailed optical, time-resolved decay kinetics, time-resolved area-normalized emission spectra (TRANES), fluoride binding, and computational studies suggest that the multiple emissions in these triads are due to an inefficient transfer of energy from the boryl-oligothiophene to the BODIPY unit. In addition, all of the conjugates showed a ratiometric fluorescence response to fluoride ions.

Hydroboration of vinyl halides with mesitylborane: a direct access to (mesityl)(alkyl)haloboranes

The direct access to (mesityl)(alkyl)haloboranes (Mes(Alk)BX) (X = Br, Cl) from mesitylborane dimer and vinyl halides is presented. The involved hydroboration reaction results in the transfer of the halogen atom from the carbon of the starting material to the boron in the final product. The reactivity of the obtained Mes(Alk)BX has been evaluated for the synthesis of the bipyridyl boronium cations and 2-arylpyridine derived boron N^C-chelates. The formation mechanism of Mes(Alk)BX is apprended by DFT-calculations which shows that their formation involves two concomitant pathways derived from the regioslectivity of the hydroboration reaction.

Bis-borylated arylisoquinoline-derived dyes with a central aromatic core: towards efficient fluorescent singlet-oxygen photosensitizers

Polycyclic aromatic hydrocarbon chromophores that show an ideal bipartition between fluorescence and singlet oxygen production have been developed.

Organoboron molecules and polymers for organic solar cell applications

Organic solar cells (OSCs) are emerging as a new photovoltaic technology with the great advantages of low cost, light-weight, flexibility and semi-transparency. They are promising for portable energy-conversion products and building-integrated photovoltaics. Organoboron chemistry offers an important toolbox to design novel organic/polymer optoelectronic materials and to tune their optoelectronic properties for OSC applications. At present, organoboron small molecules and polymers have become an important class of organic photovoltaic materials. Power conversion efficiencies (PCEs) of 16% and 14% have been realized with organoboron polymer electron donors and electron acceptors, respectively. In this review, we summarize the research progress in various kinds of organoboron photovoltaic materials for OSC applications, including organoboron small molecular electron donors, organoboron small molecular electron acceptors, organoboron polymer electron donors and organoboron polymer electron acceptors. This review also discusses how to tune their opto-electronic properties and active layer morphology for enhancing OSC device performance. We also offer our insight into the opportunities and challenges in improving the OSC device performance of organoboron photovoltaic materials.

An Air- and Water-Stable B4 N4 -Heteropentalene Serving as a Host Material for a Phosphorescent OLED

Replacement of the carbon-carbon bonds of antiaromatic compounds with polar boron-nitrogen bonds often provides isoelectronic BN compounds with excellent thermodynamic stability and interesting photophysical properties. By this element-substitution strategy, we synthesized a new B₄ N₄ -heteropentalene derivative, 1, which is fully substituted with mesityl groups. Owing to kinetic protection by the sterically bulky substituents, 1 is remarkably stable toward air and even water. Single-crystal X-ray analysis of 1 revealed the bonding characteristics of the B₄ N₄ -heteropentalene structure. In a glassy matrix, 1 emitted short-wavelength phosphorescence with an onset at 350 nm, indicating that the triplet energy is substantially high. DFT calculations reasonably explained the ground- and excited-state electronic structures of 1 as well as its emission properties. Motivated by the high-energy triplet state of 1, we used it as a host material to fabricate a phosphorescent organic light-emitting diode with an external quantum efficiency of 15 %.

Parent B2 N2 -Perylenes with Different BN Orientations

Introducing BN units into polycyclic aromatic hydrocarbons expands the chemical space of conjugated materials with novel properties. However, it is challenging to achieve accurate synthesis of BN-PAHs with specific BN positions and orientations. Here, three new parent B₂ N₂ -perylenes with different BN orientations are synthesized with BN-naphthalene as the building block, providing systematic insight into the effects of BN incorporation with different orientations on the structure, (anti)aromaticity, crystal packing and photophysical properties. The intermolecular dipole-dipole interaction shortens the π-π stacking distance. The crystal structure, (anti)aromaticity, and photophysical properties vary with the change of BN orientation. The revealed BN doping effects may provide a guideline for the synthesis of BN-PAHs with specific stacking structures, and the synthetic strategy employed here can be extended toward the synthesis of larger BN-embedded PAHs with adjustable BN patterns.

Advances in the Supramolecular Chemistry of Tetracoordinate Boron-Containing Organic Molecules into Organogels and Mesogens

Boron-containing organic compounds are well accepted as a class of compounds having excellent photophysical properties. In addition to the unique photophysical properties, the ease of synthesis and structural robustness make tetracoordinate boron complexes ideal for a variety of applications. While significant light has been thrown on their luminescence properties, there is no collective attention to their supramolecular chemistry. In this mini review, we discuss the progress made in the supramolecular chemistry of these compounds which includes their utility as building blocks for liquid crystalline materials and gels largely driven by various non-covalent interactions like H-bonding, CH-π interactions, BF-π interactions and Van der Waals forces. The organoboron compounds presented here are prepared from easy-to-synthesize chelating units such as imines, diiminates, ketoiminates and diketonates. Moreover, the presence of heteroatoms such as nitrogen, oxygen and sulfur, and the presence of aromatic rings facilitate non-covalent interactions which not only favor their formation but also helps to stabilize the self-assembled structures.

A Cyclic Iminoborane-NHC Adduct: Synthesis, Reactivity, and Bonding Analysis

Lewis-base coordinated iminoborane adducts, in contrast to their isoelectronic analogue imines, remain largely unexplored given the lack of efficient synthetic strategies for generating robust compounds. Herein, we report the preparation of a cyclic amino iminoborane carbene complex 2 obtained in quantitative yield by adding NHC to the 1,8-(trimethylsilyl)aminonaphthalene complex of boron 1 to induce the elimination of trimethylsilyl chloride (TMSCl). The iminoborane-NHC adduct 2 shows unprecedented thermal stability both in the solid and solution phases, due to the rigid, pre-established geometry of the 1,8-diaminonaphthalene scaffold. Theoretical calculations reveal an exceptionally strong iminoborane-NHC bond as a consequence of the enhanced boron-center acidity in combination with the lower steric and electronic shielding. We show that the chemical bond can be understood as donor-acceptor interaction, leading to a different kind of electronic situation of the B═N π-bond. The high conjugation between the p_z-lone pair of the tricoordinated sp² hybridized N atom and the B═N π-system results in a particularly long B═N double bond distance. Taking advantage of the pendant lone pair of the dicoordinated sp² hybridized N atom, the iminoborane-NHC adduct gives access to NHC-stabilized borenium cation 3 through the reaction with trimethylsilyl triflate (Me₃SiOTf) or to the gallium adduct 4 by reacting with GaCl₃. Incorporating an iminoborane functional group into a π-conjugated system brings a new bonding situation for broadening the scope of BN-containing polyaromatic systems.

Modular Synthesis of Pentagonal and Hexagonal Ring-Fused NBN-Phenalenes Leading to an Excited-State Aromatization-Induced Structural Planarization Molecular Library

Although polycyclic aromatic hydrocarbons (PAHs) with a nitrogen-boron-nitrogen (NBN) moiety have recently attracted tremendous interest due to their intriguing electronic and optoelectronic properties, all of the NBN-fused π-systems reported to date are called NBN-dibenzophenalenes and were synthesized by electrophilic aromatic substitution. The synthesis of NBN-phenalenes remains challenging, and transition-metal catalysis has never been utilized to construct NBN-embedded π-scaffolds. Herein, a palladium-catalyzed cyclization/bicyclization strategy was developed for the synthesis of diverse pentagonal and hexagonal ring-fused NBN-phenalenes and half-NBN-phenalenes. All of the NBN-embedded π-scaffolds presented in our paper are fluorescent in both solution and the solid state. Further investigations showed that the five-membered NBN rings exhibit the properties of traditional luminogens, while those with a six-membered NBN ring generally undergo photoinduced structural planarization (PISP) and exhibit different colors and quantum yields of fluorescence with different concentrations in solution. Time-resolved spectroscopy and TD-DFT calculations revealed that excited-state aromatization is the driving force for PISP in hexagonal ring-fused NBN-π systems, leading to the formation of excimers. Notably, the scope of PISP compounds is still quite limited, and PISP has never been observed in NBN-π systems before. These hexagonal ring-fused NBN-π systems constitute a novel PISP molecular library and appear to be a new class of aggregation-induced excimer emission (AIEE) materials. Finally, the AIEE behavior of these six-membered NBN rings was applied to the detection of nitro explosives, achieving excellent sensitivity. In general, this work provides a new viewpoint for synthesizing NBN-fused π-systems and understanding the excited-state motion of luminogens.

Controlling selectivity in N-heterocycle directed borylation of indoles

Electrophilic borylation of indoles with BX₃ (X = Cl or Br) using directing groups installed at N1 can proceed at the C2 or the C7 position. The six membered heterocycle directing groups utilised herein, pyridines and pyrimidine, result in indole C2 borylation being the dominant outcome (in the absence of a C2-substituent). In contrast, C7 borylation was achieved using five membered heterocycle directing groups, such as thiazole and benzoxazole. Calculations on the borylation of indole substituted with a five (thiazole) and a six (pyrimidine) membered heterocycle directing group indicated that borylation proceeds via borenium cations with arenium cation formation having the highest barrier in both cases. The C7 borylated isomer was calculated to be the thermodynamically favoured product with both five and six membered heterocycle directing groups, but for pyrimidine directed indole borylation the C2 product was calculated to be the kinetic product. This is in contrast to thiazole directed indole borylation with BCl₃ where the C7 borylated isomer is the kinetic product too. Thus, heterocycle ring size is a useful way to control C2 vs. C7 selectivity in N-heterocycle directed indole C-H borylation.

New luminescent tetracoordinate boron complexes: an in-depth experimental and theoretical characterisation and their application in OLEDs

New luminescent 2-iminopyrrolyl boron complexes with different BX2 moieties are extensively studied via complementary experimental and theoretical methodologies, including application in OLEDs.

Complexation of 2,7-diazapyrene with boron for structural and electronic tuning

Complexation of tetra(hydroxyphenyl)-2,7-diazapyrene with boron provided the boron complexes as anti- and syn-isomers. The structural difference induces self-association behaviour of the syn-isomer and isomerisation of the anti-isomer in the solution and solid states.

Boron(iii) β-diketonate-based small molecules for functional non-fullerene polymer solar cells and organic resistive memory devices

A class of acceptor-donor-acceptor chromophoric small-molecule non-fullerene acceptors, 1-4, with difluoroboron(iii) β-diketonate (BF2bdk) as the electron-accepting moiety has been developed. Through the variation of the central donor unit and the modification on the peripheral substituents of the terminal BF2bdk acceptor unit, their photophysical and electrochemical properties have been systematically studied. Taking advantage of their low-lying lowest unoccupied molecular orbital energy levels (from -3.65 to -3.72 eV) and relatively high electron mobility (7.49 × 10-4 cm2 V-1 s-1), these BF2bdk-based compounds have been employed as non-fullerene acceptors in organic solar cells with maximum power conversion efficiencies of up to 4.31%. Moreover, bistable resistive memory characteristics with charge-trapping mechanisms have been demonstrated in these BF2bdk-based compounds. This work not only demonstrates for the first time the use of a boron(iii) β-diketonate unit in constructing non-fullerene acceptors, but also provides more insights into designing organic materials with multi-functional properties.

Boron: Its Role in Energy-Related Processes and Applications

Boron's unique position in the Periodic Table, that is, at the apex of the line separating metals and nonmetals, makes it highly versatile in chemical reactions and applications. Contemporary demand for renewable and clean energy as well as energy-efficient products has seen boron playing key roles in energy-related research, such as 1) activating and synthesizing energy-rich small molecules, 2) storing chemical and electrical energy, and 3) converting electrical energy into light. These applications are fundamentally associated with boron's unique characteristics, such as its electron-deficiency and the availability of an unoccupied p orbital, which allow the formation of a myriad of compounds with a wide range of chemical and physical properties. For example, boron's ability to achieve a full octet of electrons with four covalent bonds and a negative charge has led to the synthesis of a wide variety of borate anions of high chemical and electrochemical stability-in particular, weakly coordinating anions. This Review summarizes recent advances in the study of boron compounds for energy-related processes and applications.

Synthesis and Tunable Optical Properties of C,N-Chelated Borate Luminophores Derived from Potassium Acyltrifluoroborates

A new class of borate luminophores has been synthesized by a simple two-step reaction using potassium acyltrifluoroborates (KATs) as starting materials. The hydrazones obtained from reactions between KATs and 2-hydrazinopyridines followed by a cyclization resulted in the unprecedented formation of C,N-chelated six-membered bora-heterocycles. Under consideration of the results of DFT and TD-DFT calculations, four luminophores based on such bora-heterocycles are designed and synthesized, which exhibit a tunable fluorescence range from blue to red in the solid state. Moreover, one of the luminophores exhibits mechanofluorochromism from blue to yellow/green. As a result of the aforementioned mechanochromism of one of these luminophores, white-color emission was achieved by simply mixing the four luminophores.

Luminescent halogen-substituted 2-(N-arylimino)pyrrolyl boron complexes: the internal heavy-atom effect

New luminescent halogen-substituted 2-iminopyrrolyl boron complexes exhibited an internal-heavy atom effect depending on the position of the halogen atom, and activity in OLEDs.