Steric Modifications Tune the Regioselectivity of the Alkane Oxidation Catalyzed by Non-Heme Iron Complexes

Iron-Catalyzed Oxidation of 1-Phenylethanol and Glycerol With Hydrogen Peroxide in Water Medium: Effect of the Nitrogen Ligand on Catalytic Activity and Selectivity

The iron(II) complexes [Fe(bpy)₃](OTf)₂ (bpy = 2,2'-bipyridine; OTf = CF₃SO₃) (1) and [Fe(bpydeg)₃](OTf)₂ (bpydeg = N⁴,N⁴-bis(2-(2-methoxyethoxy)ethyl) [2,2'-bipyridine]-4,4'-dicarboxamide) (2), the latter being a newly synthesized ligand, were employed as catalyst precursors for the oxidation of 1-phenylethanol with hydrogen peroxide in water, using either microwave or conventional heating. With the same oxidant and medium the oxidation of glycerol was also explored in the presence of 1 and 2, as well as of two similar iron(II) complexes bearing tridentate ligands, i.e., [Fe(terpy)₂](OTf)₂ (terpy = 2, 6-di(2-pyridyl)pyridine) (3) and [Fe(bpa)₂](OTf)₂ (bpa = bis(2-pyridinylmethyl)amine) (4): in most reactions the major product formed was formic acid, although with careful tuning of the experimental conditions significant amounts of dihydroxyacetone were obtained. Addition of heterocyclic amino acids (e.g., picolinic acid) increased the reaction yields of most catalytic reactions. The effect of such additives on the evolution of the catalyst precursors was studied by spectroscopic (NMR, UV-visible) and ESI-MS techniques.

Ligand Taxonomy for Bioinorganic Modeling of Dioxygen-Activating Non-Heme Iron Enzymes

Novel functions emerge from novel structures. To develop efficient catalytic systems for challenging chemical transformations, chemists often seek inspirations from enzymatic catalysis. A large number of iron complexes supported by nitrogen-rich multidentate ligands have thus been developed to mimic oxo-transfer reactivity of dioxygen-activating metalloenzymes. Such efforts have significantly advanced our understanding of the reaction mechanisms by trapping key intermediates and elucidating their geometric and electronic properties. Critical to the success of this biomimetic approach is the design and synthesis of elaborate ligand systems to balance the thermodynamic stability, structural adaptability, and chemical reactivity. In this Concept article, representative design strategies for biomimetic atom-transfer chemistry are discussed from the perspectives of "ligand builders". Emphasis is placed on how the primary coordination sphere is constructed, and how it can be elaborated further by rational design for desired functions.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

cis-Dioxorhenium(V/VI) Complexes Supported by Neutral Tetradentate N4 Ligands. Synthesis, Characterization, and Spectroscopy

A series of cis-dioxorhenium(V) complexes containing chiral tetradentate N₄ ligands, including cis-[Re^V(O)₂(pyxn)]⁺ (1; pyxn = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)cyclohexane-1,2-diamine), cis-[Re^V(O)₂(6-Me₂pyxn)]⁺ (cis-2), cis-[Re^V(O)₂(R,R-pdp)]⁺ (3; R,R-pdp = 1,1'-bis((R,R)-2-pyridinylmethyl)-2,2'-bipyrrolidine), cis-[Re^V(O)₂(R,R-6-Me₂pdp)]⁺ (4), and cis-[Re^V(O)₂(bqcn)]⁺ (5; bqcn = N,N'-dimethyl-N,N'-di(quinolin-8-yl)cyclohexane-1,2-diamine), were synthesized. Their structures were established by X-ray crystallography, showing Re-O distances in the range of 1.740(3)-1.769(8) Å and O-Re-O angles of 121.4(2)-124.8(4)°. Their cyclic voltammograms in MeCN (0.1 M [NBu₄]PF₆) display a reversible Re^VI/V couple at E_1/2 = 0.39-0.49 V vs SCE. In aqueous media, three proton-coupled electron transfer reactions corresponding to Re^VI/V, Re^V/III, and Re^III/II couples were observed at pH 1. The Pourbaix diagrams of 1·OTf, 3·OTf, and 5·OTf have been examined. The electronic absorption spectra of the cis-dioxorhenium(V) complexes show three absorption bands at around 800 nm (600-1730 dm³ mol^-1 cm^-1), 580 nm (1700-5580 dm³ mol^-1 cm^-1), and 462-523 nm (3170-6000 dm³ mol^-1 cm^-1). Reaction of 1 with Lewis acids (or protic acids) gave cis-[Re^V(O)(OH)(pyxn)]²⁺ (1·H⁺), in which the Re-O distances are lengthened to 1.788(5) Å. Complex cis-2 resulted from isomerization of trans-2 at elevated temperature. cis-[Re^VI(O)₂(pyxn)](PF₆)₂ (1'·(PF₆)₂) was obtained by constant-potential electrolysis of 1·PF₆ in MeCN (0.1 M [NBu₄]PF₆) at 0.56 V vs SCE; it displays shorter Re-O distances (1.722(4), 1.726(4) Å) and a smaller O-Re-O angle (114.88(18)°) relative to 1 and shows a d-d transition absorption band at 591 nm (ε = 77 dm³ mol^-1 cm^-1). With a driving force of ca. 75 kcal mol^-1, 1' oxidizes hydrocarbons with weak C-H bonds (75.5-76.3 kcal mol^-1) via hydrogen atom abstraction. DFT and TDDFT calculations on the electronic structures and spectroscopic properties of the cis-dioxorhenium(V/VI) complexes were performed.

From DNA to catalysis: a thymine-acetate ligated non-heme iron(III) catalyst for oxidative activation of aliphatic C-H bonds

A non-heme, iron(III)/THA(thymine-1-acetate) catalyst together with H2O2 as an oxidant is efficient in oxidative C-H activation of alkanes. Although having a higher preference for tertiary C-H bonds, the catalyst also oxidizes aliphatic secondary C-H bonds into carbonyl compounds with good to excellent conversions. Based on the site selectivity of the catalyst and our mechanistic studies the reaction proceeds via an Fe-oxo species without long lived carbon centered radicals.

Readily Accessible Bulky Iron Catalysts exhibiting Site Selectivity in the Oxidation of Steroidal Substrates

Bulky iron complexes are described that catalyze the site-selective oxidation of alkyl C-H bonds with hydrogen peroxide under mild conditions. Steric bulk at the iron center is introduced by appending trialkylsilyl groups at the meta-position of the pyridines in tetradentate aminopyridine ligands, and this effect translates into high product yields, an enhanced preferential oxidation of secondary over tertiary C-H bonds, and the ability to perform site-selective oxidation of methylenic sites in terpenoid and steroidal substrates. Unprecedented site selective oxidation at C6 and C12 methylenic sites in steroidal substrates is shown to be governed by the chirality of the catalysts.

C-H Bond Oxidation Catalyzed by an Imine-Based Iron Complex: A Mechanistic Insight

A family of imine-based nonheme iron(II) complexes (LX)2Fe(OTf)2 has been prepared, characterized, and employed as C-H oxidation catalysts. Ligands LX (X = 1, 2, 3, and 4) stand for tridentate imine ligands resulting from spontaneous condensation of 2-pycolyl-amine and 4-substituted-2-picolyl aldehydes. Fast and quantitative formation of the complex occurs just upon mixing aldehyde, amine, and Fe(OTf)2 in a 2:2:1 ratio in acetonitrile solution. The solid-state structures of (L1)2Fe(OTf)(ClO4) and (L3)2Fe(OTf)2 are reported, showing a low-spin octahedral iron center, with the ligands arranged in a meridional fashion. (1)H NMR analyses indicate that the solid-state structure and spin state is retained in solution. These analyses also show the presence of an amine-imine tautomeric equilibrium. (LX)2Fe(OTf)2 efficiently catalyze the oxidation of alkyl C-H bonds employing H2O2 as a terminal oxidant. Manipulation of the electronic properties of the imine ligand has only a minor impact on efficiency and selectivity of the oxidative process. A mechanistic study is presented, providing evidence that C-H oxidations are metal-based. Reactions occur with stereoretention at the hydroxylated carbon and selectively at tertiary over secondary C-H bonds. Isotopic labeling analyses show that H2O2 is the dominant origin of the oxygen atoms inserted in the oxygenated product. Experimental evidence is provided that reactions involve initial oxidation of the complexes to the ferric state, and it is proposed that a ligand arm dissociates to enable hydrogen peroxide binding and activation. Selectivity patterns and isotopic labeling studies strongly suggest that activation of hydrogen peroxide occurs by heterolytic O-O cleavage, without the assistance of a cis-binding water or alkyl carboxylic acid. The sum of these observations provides sound evidence that controlled activation of H2O2 at (LX)2Fe(OTf)2 differs from that occurring in biomimetic iron catalysts described to date.

Molecular iron complexes as catalysts for selective C–H bond oxygenation reactions

This feature article summarises recent developments in homogeneous C–H bond oxygenation catalysed by molecular iron complexes.

Cobalt aminodiphosphine complexes as catalysts in the oxidation of n-octane

New cobalt “PNP” aminodiphosphine complexes have been prepared and characterised. They show good catalytic activity in the oxidation of n-octane to C8 oxygenates using tert-butyl hydroperoxide as an oxidant.

Recent Advances in the Selective Oxidation of Alkyl C-H Bonds Catalyzed by Iron Coordination Complexes

Selective and stereoretentive oxidation of alkyl C-H bonds has been described over the last decade by employing biologically inspired iron coordination complexes as catalysts and hydrogen peroxide as oxidant. Examples of catalyst dependent C-H site selectivity have started to appear. The current paper describes an account of these findings.

H2 oxidation versus organic substrate oxidation in non-heme iron mediated reactions with H2O2

A mixture of α-[Fe(CF₃SO₃)₂(BPMCN)] and H₂O₂ is able to oxidize H₂. However, the presence of acetic acid enhances organic substrate oxidation.

A DFT and ONIOM study of C–H hydroxylation catalyzed by nitrobenzene 1,2-dioxygenase

The DFT and ONIOM calculations show that C–H hydroxylation by nitrobenzene 1,2-dioxygenase proceeds through a HO–Fe^VO intermediate.

Hydrocarbon oxidation catalyzed by a cheap nonheme imine-based iron(ii) complex

An imine-based iron complex, prepared in situ from iron(ii), pyridine-2-carbaldehyde and 2-aminomethylpyridine, effectively catalyzes hydrocarbon oxidation at low loadings.

An iron catalyst for oxidation of alkyl C-H bonds showing enhanced selectivity for methylenic sites

Many are called but few are chosen: A nonheme iron complex catalyzes the oxidation of alkyl C-H bonds by using H(2)O(2) as the oxidant, showing an enhanced selectivity for secondary over tertiary C-H bonds (see scheme).