Organometallic Ni pincer complexes for the electrocatalytic production of hydrogen

Exploring ligand-centered electrocatalytic H2O reduction: hydrogen generation with a soluble Ni(II) octabutoxyphthalocyanine complex

A nickel(II) octabutoxyphthalocyanine complex demonstrating ligand-centered redox activity and pH dependence is reported and investigated as an electrocatalyst for hydrogen evolution from water. Spectro- and electrochemical methods were implemented to further elucidate the nature of the pH dependence and catalytic mechanism.

Accessing Ni(0) to Ni(IV) via nickel-carbon-phosphorus bond reorganization

Two-electron oxidation of a NiIIPh(PCP) pincer complex initiates phosphine ligand insertion, generating an η6-arylphosphonium moiety coordinated to NiII. The reaction is fully reversible under reducing conditions. X-ray crystallography, NMR/EPR spectroscopy, electrochemistry, and DFT calculations support the proposed Ni-C-P bond reorganization mechanisms, which access oxidation states from Ni0 to NiIV.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Experimental Electrochemical Potentials of Nickel Complexes

Nickel-catalyzed cross-coupling and photoredox catalytic reactions has found widespread utilities in organic synthesis. Redox processes are key intermediate steps in many catalytic cycles. As a result, it is pertinent to measure and document the redox potentials of various nickel species as precatalysts, catalysts, and intermediates. The redox potentials of a transition-metal complex are governed by its oxidation state, ligand, and the solvent environment. This article tabulates experimentally measured redox potentials of nickel complexes supported on common ligands under various conditions. This review article serves as a versatile tool to help synthetic organic and organometallic chemists evaluate the feasibility and kinetics of redox events occurring at the nickel center, when designing catalytic reactions and preparing nickel complexes.

1 Introduction

1.1 Scope

1.2 Measurement of Formal Redox Potentials

1.3 Redox Potentials in Nonaqueous Solution

2 Redox Potentials of Nickel Complexes

2.1 Redox Potentials of (Phosphine)Ni Complexes

2.2 Redox Potentials of (Nitrogen)Ni Complexes

2.3 Redox Potentials of (NHC)Ni Complexes

Electrochemical behaviors of a pincer-type NNN-Fe complex and catalytic H2 evolution activity

We describe electrochemical reactivity of a pincer-type [NNN-Fe(tBuNC)3](ClO4)2 complex. Upon electron reduction, the Fe(i) species experienced disproportionation to Fe(0) and Fe(ii). An electron-reduced Fe center dissociated a tBuNC ligand to make an open coordination site, where a proton could be transferred. The low-spin Fe center, assisted by isocyanide and a pyridine-based NNN-pincer ligand, catalyzed efficiently the proton reduction reaction. Also, a Lewis basic amine site in the side 'arm' of the NNN-pincer ligand lowered the free energy for the protonation of an Fe center during the proton reduction process. DFT calculations provided insight into a plausible catalytic pathway.

Systematic Trends in the Electrochemical Properties of Transition Metal Hydride Complexes Discovered by Using the Ligand Acidity Constant Equation

Understanding the thermodynamics of paramagnetic transition metal hydride complexes, especially of the abundant 3d metals, is important in the design of electrocatalysts and organometallic catalysts. The pK_a^MeCN([MHL_n]⁺/[ML_n) of paramagnetic hydrides in MeCN are estimated for the first time using the ligand acidity constant (LAC) equation where contributions to the pK_a^MeCN from each ligand are simply added together, with the sum corrected for effects of charge and 5d metals. The pK_a^LAC-MeCN([MHL_n]⁺/ML_n) of over 200 hydride complexes MHL_n are used, along with their electrochemical potentials from the literature, in an uncommonly applied thermochemical cycle in order to reveal systematic trends in the redox couples M^III/II and M^V/IV (M = Cr, Mo, W), Mn^II/I, Re^VI/V and Re^IV/III, M^III/II and M^IV/III (M = Fe, Ru, Os), and M^III/II and M^II/I (M = Co, Rh, and Ir) and allow the estimation of the bond dissociation free energies BDFE(MH) of the unoxidized hydrides MHL_n and the prediction of the electrochemical potential for their oxidation. Density functional theory (DFT) calculations are used to validate the pK_a^LAC-MeCN values of hydrides of W^III, Mn^II, Fe^III, Ru^III, Co^II, and Ni^III. When a pK_a^LAC-MeCN is less than zero for a given complex [MHL_n]⁺, the oxidation of MHL_n is irreversible due to proton loss from the oxidized complex to the solvent. When pK_a^LAC-MeCN ≫ 0, the oxidation is reversible when there is no gross change in the coordination geometry upon a change in the redox state. Twenty paramagnetic hydrides prepared in bulk all have pK_a^LAC-MeCN > 8.

Chemical and Electrochemical Recycling of End-Use Poly(ethylene terephthalate) (PET) Plastics in Batch, Microwave and Electrochemical Reactors

This work describes new methods for the chemical recycling of end-use poly(ethylene terephthalate) (PET) in batch, microwave and electrochemical reactors. The reactions are based on basic hydrolysis of the ester moieties in the polymer framework and occur under mild reaction conditions with low-cost reagents. We report end-use PET depolymerization in refluxing methanol with added NaOH with 75% yield of terephthalic acid in batch after 12 h, while yields up to 65% can be observed after only 40 min under microwave irradiation at 85 °C. Using basic conditions produced in the electrochemical reduction of protic solvents, electrolytic experiments have been shown to produce 17% terephthalic acid after 1 h of electrolysis at −2.2 V vs. Ag/AgCl in 50% water/methanol mixtures with NaCl as a supporting electrolyte. The latter method avoids the use of caustic solutions containing high-concentration NaOH at the outset, thus proving the concept for a novel, environmentally benign method for the electrochemical recycling of end-use PET based on low-cost solvents (water and methanol) and reagents (NaCl and electricity).

H2 Evolution from a Thiolate-Bound Ni(III) Hydride

Terminal Ni^III hydrides are proposed intermediates in proton reduction catalyzed by both molecular electrocatalysts and metalloenzymes, but well-defined examples of paramagnetic nickel hydride complexes are largely limited to bridging hydrides. Herein, we report the synthesis of an S = 1/2, terminally bound thiolate-Ni^III-H complex. This species and its terminal hydride ligand in particular have been thoroughly characterized by vibrational and EPR techniques, including pulse EPR studies. Corresponding DFT calculations suggest appreciable spin leakage onto the thiolate ligand. The hyperfine coupling to the terminal hydride ligand of the thiolate-Ni^III-H species is comparable to that of the hydride ligand proposed for the Ni-C hydrogenase intermediate (Ni^III-H-Fe^II). Upon warming, the featured thiolate-Ni^III-H species undergoes bimolecular reductive elimination of H₂. Associated kinetic studies are discussed and compared with a structurally related Fe^III-H species that has also recently been reported to undergo bimolecular H-H coupling.

Prediction of pKa s of Late Transition-Metal Hydrides via a QM/QM Approach

Three implicit solvation models, the conductor-like polarizable continuum model (C-PCM), the conductor-like screening model (COSMO), and universal implicit solvent model (SMD), combined with a hybrid two layer QM/QM approach (ONIOM), were utilized to calculate the pK_a values, using a direct thermodynamic scheme, of a set of Group 10 transition metal (TM) hydrides in acetonitrile. To obtain the optimal combination of quantum methods for ONIOM calculations with implicit solvation models, the influence of factors, such as the choice of density functional and basis set, the atomic radii used to build a cavity in the solvent, and the size of the model system in an ONIOM scheme, was examined. Additionally, the impact of Grimme's empirical dispersion correction and exact exchange was also investigated. The results were calibrated by experimental data. This investigation provides insight about effective models for the prediction of thermodynamic properties of TM-containing complexes with bulky ligands. © 2019 Wiley Periodicals, Inc.

CuI SNS triazole and imidazole pincers as electrocatalyst precursors for the production of solar fuels

This work reports the first example of mono-nuclear Cu pincers with SNS ligation acting as electrocatalyst precursors for the electrochemical conversion of carbon dioxide to CO and H₂ in protic organic media.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Nickel(ii) PE1CE2P pincer complexes (E = O, S) for electrocatalytic proton reduction

The catalytic activity of a series of nickel complexes with different phosphinite/thiophosphinite ligands for electrocatalytic proton reduction strongly depends on the nature of the pincer ligands.

Effect of ligand substituents on nickel and copper [N4] complexes: electronic and redox behavior, and reactivity towards protons

The ligand substituents have a major effect on the redox potentials, catalytic efficiency and robustness of the complexes in HER.

Electrocatalytic proton reduction by an air-stable nickel(ii)-thiolato PNN pincer complex

We report an air-stable nickel(ii)-thiolato PNN pincer complex [(PNN)NiII(SC6H4Me)]+[MeC6H4SO3]- (PNN = 2-((di-tert-butylphosphinomethyl-6-diethylaminomethyl)pyridine)) which is capable of reducing protons at an overpotential of 0.54 V at low acid concentrations. The proton reduction can be catalysed using weak or strong acids such as acetic acid and trifluoroacetic acid respectively. In contrast, the chloro and nitrate derivatives of the nickel pincer complex behave as poorer catalysts. A mechanism accounting for the role of the ligand in proton reduction is also briefly outlined.

Hydride & dihydrogen complexes of earth abundant metals: structure, reactivity, and applications to catalysis

Recent developments in the chemistry of hydride and dihydrogen complexes of iron, cobalt, and nickel are summarized. Applications in homogeneous catalysis are emphasized.

Sonogashira (Cu and amine free) and Suzuki coupling in air catalyzed via nanoparticles formed in situ from Pd(ii) complexes of chalcogenated Schiff bases of 1-naphthaldehyde and their reduced forms

The activation of the coupling reactions with the Pd(ii)-complexes (0.05–0.01 mol% loading) is significant in 1–2 h under mild conditions.

Brønsted-Lowry Acid Strength of Metal Hydride and Dihydrogen Complexes

Transition metal hydride complexes are usually amphoteric, not only acting as hydride donors, but also as Brønsted-Lowry acids. A simple additive ligand acidity constant equation (LAC for short) allows the estimation of the acid dissociation constant Ka(LAC) of diamagnetic transition metal hydride and dihydrogen complexes. It is remarkably successful in systematizing diverse reports of over 450 reactions of acids with metal complexes and bases with metal hydrides and dihydrogen complexes, including catalytic cycles where these reactions are proposed or observed. There are links between pKa(LAC) and pKa(THF), pKa(DCM), pKa(MeCN) for neutral and cationic acids. For the groups from chromium to nickel, tables are provided that order the acidity of metal hydride and dihydrogen complexes from most acidic (pKa(LAC) -18) to least acidic (pKa(LAC) 50). Figures are constructed showing metal acids above the solvent pKa scales and organic acids below to summarize a large amount of information. Acid-base features are analyzed for catalysts from chromium to gold for ionic hydrogenations, bifunctional catalysts for hydrogen oxidation and evolution electrocatalysis, H/D exchange, olefin hydrogenation and isomerization, hydrogenation of ketones, aldehydes, imines, and carbon dioxide, hydrogenases and their model complexes, and palladium catalysts with hydride intermediates.

A case study of proton shuttling in palladium catalysis

Thanks to mechanistic studies, the catalytic performance of SCS indenediide Pd pincer complexes has been spectacularly enhanced using catechol additives as proton shuttles.

The mechanism of alkynoic acid cycloisomerization with SCS indenediide Pd pincer complexes has been investigated experimentally and computationally. These studies confirmed the cooperation between the Pd center and the backbone of the pincer ligand, and revealed the involvement of a second molecule of substrate. It acts as a proton shuttle in the activation of the acid, it directs the nucleophilic attack of the carboxylic acid on the π-coordinated alkyne and it relays the protonolysis of the resulting vinyl Pd species. A variety of H-bond donors have been evaluated as external additives, and polyols featuring proximal hydroxyl groups, in particular catechol derivatives, led to significant catalytic enhancement. The impact of 4-nitrocatechol and 1,2,3-benzenetriol is particularly striking on challenging substrates such as internal 4- and 5-alkynoic acids. Endo/exo selectivities up to 7.3/1 and 60-fold increase in reactivity were achieved.

Non-precious metal complexes with an anionic PCP pincer architecture

This perspective article provides an overview of the advancements in the field of non-precious metal complexes featuring anionic PCP pincer ligands with the inclusion of aliphatic systems. It covers research from the beginning in 1976 until late 2015 and provides a summary of key developments in this area, which is, to date, limited to the metals nickel, cobalt, iron, and molybdenum. While the research in nickel PCP complexes is already quite extensive, the chemistry of cobalt, iron, and molybdenum PCP complexes is comparatively sparse. With other non-precious metals such as copper, manganese, chromium or vanadium no PCP complexes are known as yet. In the case of nickel PCP complexes already many catalytic applications such as Suzuki-Miyaura coupling, C-S cross coupling, Kharasch and Michael additions, hydrosilylation of aldehydes and ketones, cyanomethylation of aldehydes, and hydroamination of nitriles were reported. While iron PCP complexes were found to be active catalysts for the hydrosilylation of aldehydes and ketones as well as the dehydrogenation of ammonia-borane, cobalt PCP complexes were not applied to any catalytic reactions. Surprisingly, only one molybdenum PCP complex is reported, which was capable of cleaving dinitrogen to give a nitride complex. This perspective underlines that the combination of cheap and abundant metals such as nickel, cobalt, and iron with PCP pincer ligands may result in the development of novel, versatile, and efficient catalysts for atom-efficient catalytic reactions.

Ambiguous electrocatalytic CO2 reduction behaviour of a nickel bis(aldimino)pyridine pincer complex

The electrochemical properties of two Ni(NNN)X₂ pincer complexes are reported where X = Cl or Br and NNN is N,N′-(2,6-diisopropylphenyl)bis-aldiminopyridine.

Structural and electronic trends for five coordinate 1st row transition metal complexes: Mn(ii) to Zn(ii) captured in a bis(iminopyridine) framework

A series of divalent bis(iminopyridine) complexes {2,6-[PhCN(tBu₂C₆H₃)]₂C₅H₃N}MBr₂ provided a unique system for investigating the correlation of experimental structure and electronic structure analysis.

Efficient electro/photocatalytic water reduction using a [NiII(N2Py3)]2+ complex

A nickel-based electro/photocatalyst acts efficiently toward water reduction with a remarkable TON of 3500. Involvement of the ligand-reduced [Ni^IL˙] species is proposed.

Copper complexes as catalyst precursors in the electrochemical hydrogen evolution reaction

Two copper complexes were investigated with respect to their activity in the electrocatalysed hydrogen evolution reaction. The complexes are precursors for highly active copper(0) and Cu₂O deposits.

Electrocatalytic Reduction of Carbon Dioxide with a Well-Defined PN3 -Ru Pincer Complex

A well-defined PN³ -Ru pincer complex (5) bearing a redox-active bipyridine ligand with an aminophosphine arm has been established as an effective and stable molecular electrocatalyst for CO₂ reduction to CO and HCOOH with negligible formation of H₂ in a H₂ O/MeCN mixture.

Rapid oxidative hydrogen evolution from a family of square-planar nickel hydride complexes

One-electron oxidation in a family of square planar nickel hydride complexes leads to facile H₂ evolution.

A series of square-planar nickel hydride complexes supported by bis(phosphinite) pincer ligands with varying substituents (–OMe, –Me, and –Bu^t) on the pincer backbone have been synthesized and completely characterized by NMR spectroscopy, IR spectroscopy, elemental analysis, and X-ray crystallography. Their cyclic voltammograms show irreversible oxidation peaks (peak potentials from 101 to 316 mV vs. Fc⁺/Fc) with peak currents consistent with overall one-electron oxidations. Chemical oxidation by the one-electron oxidant Ce(NBu₄)₂(NO₃)₆ was studied by NMR spectroscopy, which provided quantitative evidence for post-oxidative H₂ evolution leading to a solvent-coordinated nickel(ii) species with the pincer backbone intact. Bulk electrolysis of the unsubstituted nickel hydride (3a) showed an overall one-electron stoichiometry and gas chromatographic analysis of the headspace gas after electrolysis further confirmed stoichiometric production of dihydrogen. Due to the extremely high rate of the post-oxidative chemical process, electrochemical simulations have been used to establish a lower limit of the bimolecular rate constant (k_f > 10⁷ M^–1 s^–1) for the H₂ evolution step. To the best of our knowledge, this is the fastest known oxidative H₂ evolution process observed in transition metal hydrides. Quantum chemical calculations based on DFT indicate that the one-electron oxidation of the nickel hydride complex provides a strong chemical driving force (–90.3 kcal mol^–1) for the production of H₂ at highly oxidizing potentials.