From 1D Chain to 3D Framework Uranyl Diphosphonates: Syntheses, Crystal Structures, and Selective Ion Exchange

Regulating the Porosity of Uranyl Phosphonate Frameworks with Quaternary Ammonium: Structure, Characterization, and Fluorescent Temperature Sensors

Regulating the porosity of metal phosphonate frameworks is still challenging, even though this is not an issue for carboxylate-based metal-organic frameworks (MOFs). Quaternary ammonium cations are common template reagents widely used for structure control. However, it is not successful for uranyl phosphonate frameworks (UPFs) because the large volume sizes of templates make it challenging to enter the channels constructed by phosphonate ligands with small pore sizes and low dimensions. In this work, three new porous three-dimensional UPFs were synthesized using the phosphonate ligand and template reagents with the same geometry, namely, (TEA)₂(UO₂)₃(TppmH₄)₂·2H₂O (UPF-106), (TPA)₂(UO₂)₃(TppmH₄)₂ (UPF-107), and (TBA)₂(UO₂)₅(TppmH₂)₂(H₂O)₂·4H₂O (UPF-108). The porosity of the UPFs in this work showed a positive relation with the sizes of the template ammonium cations. Thermogravimetric analysis and infrared and ultraviolet spectroscopy were performed. The variable-temperature fluorescence spectra of the three compounds showed that the fluorescence intensity has an excellent relation to temperature with a potential application as fluorescence temperature sensors.

State-of-the-art progress for the selective crystallization of actinides, synthesis of actinide compounds and their functionalization

Crystallization and immobilization of actinides to form actinide compounds are of significant importance for the extraction and reutilization of nuclear waste in the nuclear industry. In this paper, the state-of-art progress in the crystallization of actinides are summarized, as well as the main functionalization of the actinide compounds, i.e., as adsorbents for heavy metal ions and organic pollutant in waste management, as (photo)catalysts for organic degradation and conversion, including degradation of organic dyes and antibiotics, dehydrogenation of N-heterocycles, CO₂ cycloaddition, selective alcohol oxidation and selective oxidation of sulfides. This review will give a comprehensive summary about the synthesis and application exploration of solid actinide crystalline salts and actinide-based metal organic frameworks in the past decades. Finally, the future perspectives and challenges are proposed in the end to give a promising direction for future investigation.

Lanthanide-uranyl phosphonates constructed from diethyl ((phenylsulfonyl)methyl)phosphonate

Lanthanide-uranyl phosphonates possess intriguing crystal structures and huge application prospects, but the construction of these materials remains challenging. In this work, we demonstrate that new uranyl and lanthanide-uranyl sulfonylphosphonates with elegant crystal structures and photophysical properties can be assembled hydrothermally by employing the heterofunctional diethyl phosphonate (diethyl ((phenylsulfonyl)methyl)phosphonate, Et₂L) as a precursor ligand, which provides an effective strategy for the construction of lanthanide-uranyl phosphonates.

3D Uranyl Organic Frameworks Supported by Rigid Octadentate Carboxylate Ligand: Synthesis, Structure Diversity, and Luminescence Properties

Seven three dimensional (3D) uranyl organic frameworks (UOFs), formulated as [NH₄ ][(UO₂ )₃ (HTTDS)(H₂ O)] (1), [(UO₂ )₄ (HTTDS)₂ ](HIM)₆ (2, IM=imidazole), [(UO₂ )₄ (TTDS)(H₂ O)₂ (Phen)₂ ] (3, Phen=1,10-phenanthroline), [Zn(H₂ O)₄ ]_0.5 [(UO₂ )₃ (HTTDS)(H₂ O)₄ ] (4), and {(UO₂ )₂ [Zn(H₂ O)₃ ]₂ (TTDS)} (5), {Zn(UO₂ )₂ (H₂ O)(Dib)_0.5 (HDib)(HTTDS)} (6, Dib=1,4-di(1H-imidazol-1-yl)benzene) and [Na]{(UO₂ )₄ [Cu₃ (u₃ -OH)(H₂ O)₇ ](TTDS)₂ } (7) have been hydrothermally prepared using a rigid octadentate carboxylate ligand, tetrakis(3,5-dicarboxyphenyl)silicon(H₈ TTDS). These UOFs have different 3D self-assembled structures as a function of co-ligands, structure-directing agents and transition metals. The structure of 1 has an infinite ribbon formed by the UO₇ pentagonal bipyramid bridged by carboxylate groups. With further introduction of auxiliary N-donor ligands, different structure of 2 and 3 are formed, in 2 the imidazole serves as space filler, while in 3 the Phen are bound to [UO₂ ]²⁺ units as co-ligands. The second metal centers were introduced in the syntheses of 4-7, and in all cases, they are part of the final structures, either as a counterion (4) or as a component of framework (5-7). Interesting, in 7, a rare polyoxometalate [Cu₃ (μ₃ -OH)O₇ (O₂ CR)₄ ] cluster was found in the structure. It acts as an inorganic building unit together with the dimer [(UO₂ )₂ (O₂ CR)₄ ] unit. Those uranyl carboxylates were sufficiently determined by single crystal X-ray diffraction, and their topological structures and luminescence properties were analyzed in detail.

Controlling the secondary assembly of porous anionic uranyl-organic polyhedra through organic cationic templates

Herein, we report a new uranyl-organic polyhedron U₄L₄ (L = BTPCA) assembled from uranyl and a semirigid tritopic ligand. By adjusting the carbon chain length of organic templates, two complexes can be obtained based on the diverse secondary assembly of U₄L₄ cages. The mechanism of different arrangements of U₄L₄ cages induced by organic templates was explored in detail.

Robust and Flexible Thioantimonate Materials for Cs+ Remediation with Distinctive Structural Transformation: A Clear Insight into the Ion-Exchange Mechanism

It is imperative yet challenging to efficiently sequester the ¹³⁷Cs⁺ ion from aqueous solutions because of its highly environmental mobility and extremely high radiotoxicity. The systematical clarification for underlying mechanism of Cs⁺ removal and elution at the molecular level is rare. Here, efficient Cs⁺ capture is achieved by a thioantimonate [MeNH₃]₃Sb₉S₁₅ (FJSM-SbS) with high capacity, fast kinetics, wide pH durability, excellent β and γ radiation resistances, and facile elution. The Cs⁺ removal is not significantly impacted by coexisting Na⁺, K⁺, Ca²⁺, Mg²⁺, and Sr²⁺ ions which is beneficial to the remediation of Cs⁺-contaminated real waters. Importantly, the mechanism is directly illuminated by revealing an unprecedented single-crystal to single-crystal structural transformation upon Cs⁺ uptake and elution processes. The superior Cs⁺ removal results from an unusual synergy from strong affinity of soft S^2- with Cs⁺, easily exchangeable [MeNH₃]⁺ cations, and the flexible and robust framework of FJSM-SbS with open windows as trappers.

Variability of Uranyl Carboxylates from Rigid Terophenyldicarboxylic Acid Ligands

Three uranyl carboxylates, namely, (UO₂)(L¹)(H₂O)_0.5 (1), [(UO₂)(L²)(H₂O)]·2H₂O (2), and [(UO₂)(L²)(H₂O)]·(CH₃CN) (3), were synthesized hydrothermally from 2',3',5',6'-tetramethyl-(1,1':4',1″-terphenyl)-4,4″-dicarboxylic acid (H₂L¹) and 2',5'-dimethyl-(1,1':4',1″-terphenyl)-3,3″-dicarboxylic acid (H₂L²), which are all steric carboxylic acid ligands but vary with the carboxylic acid group position and methyl group number. It is found that compound 1 displays a three-dimensional 8-fold-interpenetrated net with channels running along the c direction. Compounds 2 and 3 are isostructural, and all display two-dimensional-layered crystal structures but contain different guest molecules. The photophysical measurements reveal that compounds 1 and 2, which contain disordered water molecules, are luminescence-quenched, whereas compound 3 containing acetonitrile molecules is luminescent.

The presence of mixed-valent silver in the uranyl phenylenediphosphonate framework

A 2-D silver uranyl phosphonate presents both Ag⁺ and Ag⁰ atoms in the free space between the adjacent layers and the incorporation of the mixed-valent silver sites results in the quenching of the fluorescent emission.

Structural Tuning and Sensitization of Uranyl Phosphonates by Incorporation of Countercations into the Framework

By the introduction of terephthalic acid, tetramethylammonium chloride, and Zn²⁺ ions, three new uranyl triphosphonates with varying crystal structures, namely, [H₃O][(UO₂)₂(HL)]·H₂O (1), [NMe₄][(UO₂)₂(HL)(H₂O)]·H₂O (2), and [(UO₂)₃Zn(H₂L)₂(H₂O)₂]·3H₂O (3), where H₆L = benzene-1,3,5-triyltris(methylene) triphosphonic acid, have been successfully synthesized and characterized by means of powder and single crystal XRD, IR, EA, TGA, UV-vis, and luminescence. These three compounds all possess three-dimensional framework structures with hydrium, tetramethylammonium, and Zn²⁺ as the respective countercations. The uranium(VI) center luminescence of compounds 1 and 2 is completely quenched. However, the incorporation of Zn²⁺ into the matrix of uranyl phosphonate in the case of compound 3 results in the emerging of the typical intense vibronic emissions of U(VI), demonstrating that zinc phosphonate can behave as sensitizer of uranyl phosphonates. The quenching and sensitization mechanism were also discussed.

Li6Na3Sr14Al11P22O90: an oxo-centered Al3cluster based phosphate constructed from two types of (3,6)-connected kgd layers

A novel aluminophosphate Li₆Na₃Sr₁₄Al₁₁P₂₂O₉₀containing an anti-Lowenstein's rule Al–O–Al linkage consists of two types of (3,6)-connected kgd layers [Al(Al₃O)(PO₄)₇]²⁵⁻and [Al(PO₄)₂]³⁻.

Fabrication of New Uranyl Phosphonates by Varying Quaternary Ammonium Cation: Synthesis, Structure, Luminescent Properties, and Single-Crystal to Single-Crystal Transformation

Four new uranyl triphosphonates, namely, [N(CH₄)₄][UO₂(H₃L)][H₂O] (1), [(UO₂)_1.5(H₃L)(H₂O)_1.5][H₂O] (2), [NBu₄][(UO₂)_3.5(H₂L)₂][(H₂O)_4.5] (3), and [(UO₂)_1.5(H₃L)(H₂O)_2.5][(H₂O)_2.5] (4), where H₆L = benzene-1,3,5-triyltris(methylene)triphosphonic acid, were obtained from a triphosphonate ligand in the presence of different quaternary ammonium cations. The structural characterization revealed that the introduction of quaternary ammonium cation had a major impact on the structure formation of uranyl phosphonates. Compound 1 possesses a three-dimensional anionic framework structure. Tetramethylammonium cations are accommodated in the channels, serving as counterions and structure directing agents. Compound 2 also displays a three-dimensional framework structure but is neutral, because the tetrapropylammonium cations are not involved in the crystal structure. Compound 3 has an intercalation structure; between the layers are the tetrabutylammonium cations, balancing the charge and strengthening the supramolecular structure with C-H···O interactions. No obvious uptake of N₂ and CO₂ could be observed for compound 2 due to the shrinkage of the framework and structural transformation. Compound 2 undergoes single-crystal to single-crystal transformation under vacuum, leading to the formation of compound 4, which possesses a two-dimensional layer structure. The photophysical properties of these compounds were also investigated.

First three-dimensional actinide polyrotaxane framework mediated by windmill-like six-connected oligomeric uranyl: dual roles of the pseudorotaxane precursor

The first 3D uranyl polyrotaxane framework with a pseudorotaxane guest trapped in an octahedral cavity was synthesized based on tetra-nuclear uranyl.

Multidimensional (0D to 3D) Alkaline-Earth Metal Diphosphonates: Synthesis, Structural Diversity, and Luminescence Properties

A series of new alkaline-earth metal diphosphonate frameworks were successfully synthesized under solvothermal reaction condition (160 °C, 3 d) using 1-hydroxyethylidene-1,1-diphosphonic acid (CH3C(OH)(H2PO3)2, hedpH4) as a diphosphonate building block and Mg(II), Ca(II), Sr(II), or Ba(II) ions as alkaline-earth metal ion centers in water, dimethylformamide, and/or EtOH media. These diphosphonate frameworks, (H2NMe2)4[Mg(hedpH2)3]·3H2O (1), (H2NMe2)2[Ca(hedpH2)2] (2), (H2NMe2)2[Sr3(hedpH2)4(H2O)2] (3), and [Ba3(hedpH2)3]·H2O (4) exhibited interesting structural topologies (zero-, one-, two-, and three-dimensional (0D, 1D, 2D, and 3D, respectively)), which are mainly depending on the metal ions and the solvents used in the synthesis. The single-crystal analysis of these newly synthesized compounds revealed that 1 was a 0D molecule, 2 has 1D chains, 3 was a 3D molecule, and 4 has 2D layers. All compounds were further characterized using thermogravimetric analysis, solid-state (31)P NMR, powder X-ray diffraction analysis, UV-vis spectra, and infrared spectroscopy. In addition, Eu(III)- and Tb(III)-doped compounds of 1-4, namely, (H2NMe2)4[Ln(x)Mg(1-x)(hedpH2)2(hedpH(2-x))]·3H2O (1Ln), (H2NMe2)2[Ln(x)Ca(1-x)(hedpH2)(hedpH(2-x))] (2Ln), (H2NMe2)2[Ln(x)Sr(3-x)(hedpH2)3(hedpH(2-x))(H2O)2] (3Ln), and [Ln(x)Ba(3-x)(hedpH2)2(hedpH(2-x))]·H2O (4Ln) (where Ln = Eu, Tb), were synthesized, and their photoluminescence properties were studied. The quantum yield of 1Eu-4Eu was measured with reference to commercial red phosphor, Y2O2S:Eu(3+) (YE), and the quantum yield of terbium-doped compounds 1Tb-4Tb was measured with reference to commercial green-emitting phosphor CeMgAl10O17:Tb(3+). Interestingly, the compound 2Eu showed very high quantum yield of 92.2%, which is better than that of the reference commercial red phosphor, YE (90.8%).

A family of 3D UO22+–5-X-1,3-dicarboxylate (X = –H, –NO2, –NH2, –OH) hybrid materials: structural relevance with variation of substituent groups and photochemical properties

A family of 3D uranyl hybrid materials based on 5-X-1,3-dicarboxylate have been synthesized, in which two types of 1D chains assembled by the same uranyl dimer motif [(UO₂)₂L₂] exist.

Syntheses, structures, luminescence and molecular recognition properties of four new cadmium carboxyphosphonates with 2D layered and 3D supramolecular structures

Four new cadmium carboxyphosphonates with 2D layered and 3D supramolecular structure have been hydrothermally synthesized. Their luminescence and molecular recognition properties have been studied.