Acid-Dependent Degradation of a [2Fe–2S] Cluster by Nitric Oxide

Electrically conductive [Fe4S4]-based organometallic polymers

Tailoring the molecular components of hybrid organic-inorganic materials enables precise control over their electronic properties. Designing electrically conductive coordination materials, e.g. metal-organic frameworks (MOFs), has relied on single-metal nodes because the metal-oxo clusters present in the vast majority of MOFs are not suitable for electrical conduction due to their localized electron orbitals. Therefore, the development of metal-cluster nodes with delocalized bonding would greatly expand the structural and electrochemical tunability of conductive materials. Whereas the cuboidal [Fe4S4] cluster is a ubiquitous cofactor for electron transport in biological systems, few electrically conductive artificial materials employ the [Fe4S4] cluster as a building unit due to the lack of suitable bridging linkers. In this work, we bridge the [Fe4S4] clusters with ditopic N-heterocyclic carbene (NHC) linkers through charge-delocalized Fe-C bonds that enhance electronic communication between the clusters. [Fe4S4Cl2(ditopic NHC)] exhibits a high electrical conductivity of 1 mS cm-1 at 25 °C, surpassing the conductivity of related but less covalent materials. These results highlight that synthetic control over individual bonds is critical to the design of long-range behavior in semiconductors.

The Elusive Mononitrosylated [Fe4 S4 ] Cluster in Three Redox States

Iron-sulfur clusters are well-established targets in biological nitric oxide (NO) chemistry, but the key intermediate in these processes-a mononitrosylated [Fe4 S4 ] cluster-has not been fully characterized in a protein or a synthetic model thereof. Here, we report the synthesis of a three-member redox series of isostructural mononitrosylated [Fe4 S4 ] clusters. Mononitrosylation was achieved by binding NO to a 3 : 1 site-differentiated [Fe4 S4 ]+ cluster; subsequent oxidation and reduction afforded the other members of the series. All three clusters feature a local high-spin Fe3+ center antiferromagnetically coupled to 3 [NO]- . The observation of an anionic NO ligand suggests that NO binding is accompanied by formal electron transfer from the cluster to NO. Preliminary reactivity studies with the monocationic cluster demonstrate that exposure to excess NO degrades the cluster, supporting the intermediacy of mononitrosylated intermediates in NO sensing/signaling.

The Biologically Relevant Coordination Chemistry of Iron and Nitric Oxide: Electronic Structure and Reactivity

Nitric oxide (NO) is an important signaling molecule that is involved in a wide range of physiological and pathological events in biology. Metal coordination chemistry, especially with iron, is at the heart of many biological transformations involving NO. A series of heme proteins, nitric oxide synthases (NOS), soluble guanylate cyclase (sGC), and nitrophorins, are responsible for the biosynthesis, sensing, and transport of NO. Alternatively, NO can be generated from nitrite by heme- and copper-containing nitrite reductases (NIRs). The NO-bearing small molecules such as nitrosothiols and dinitrosyl iron complexes (DNICs) can serve as an alternative vehicle for NO storage and transport. Once NO is formed, the rich reaction chemistry of NO leads to a wide variety of biological activities including reduction of NO by heme or non-heme iron-containing NO reductases and protein post-translational modifications by DNICs. Much of our understanding of the reactivity of metal sites in biology with NO and the mechanisms of these transformations has come from the elucidation of the geometric and electronic structures and chemical reactivity of synthetic model systems, in synergy with biochemical and biophysical studies on the relevant proteins themselves. This review focuses on recent advancements from studies on proteins and model complexes that not only have improved our understanding of the biological roles of NO but also have provided foundations for biomedical research and for bio-inspired catalyst design in energy science.

Generation of H2S from Thiol-Dependent NO Reactivity of Model [4Fe-4S] Cluster and Roussin's Black Anion

Iron-sulfur clusters (Fe-S) have been well established as a target for nitric oxide (NO) in biological systems. Complementary to protein-bound studies, synthetic models have provided a platform to study what iron nitrosylated products and byproducts are produced depending on a controlled reaction environment. We have previously shown a model [2Fe-2S] system that produced a dinitrosyl iron complex (DNIC) upon nitrosylation along with hydrogen sulfide (H₂S), another important gasotransmitter, in the presence of thiol, and hypothesized a similar reactivity pattern with [4Fe-4S] clusters which have largely produced inconsistent reaction products across biological and synthetic systems. Roussin's black anion (RBA), [Fe₄(μ₃-S)₃(NO)₇]^-, is a previously established reaction product from synthetic [4Fe-4S] clusters with NO. Here, we present a new reactivity for the nitrosylation of a synthetic [4Fe-4S] cluster in the presence of thiol and thiolate. [Et₄N]₂[Fe₄S₄(SPh)₄] (1) was nitrosylated in the presence of excess PhSH to generate H₂S and an "RBA-like" intermediate that when further reacted with [NEt₄][SPh] produced a {Fe(NO)₂}⁹ DNIC, [Et₄N][Fe(NO)₂(SPh)₂] (2). This "RBA-like" intermediate proved difficult to isolate but shares striking similarities to RBA in the presence of thiol based on IR υ_(NO) stretching frequencies. Surprisingly, the same reaction products were produced when the reaction started with RBA and thiol. Similar to 1/NO, RBA in the presence of thiol and thiolate generates stoichiometric amounts of DNIC while releasing its bridging sulfides as H₂S. These results suggest not only that RBA may not be the final product of [4Fe-4S] + NO but also that RBA has unprecedented reactivity with thiols and thiolates which may explain current challenges around identifying biological nitrosylated Fe-S clusters.

Iron(II/III) Halide Complexes Promote the Interconversion of Nitric Oxide and S-Nitrosothiols through Reversible Fe-S Interaction

Heme and non-heme iron in biology mediate the storage/release of NO^• from S-nitrosothiols as a means to control the biological concentration of NO^•. Despite their importance in many physiological processes, the mechanisms of N-S bond formation/cleavage at Fe centers have been controversial. Herein, we report the interconversion of NO^• and S-nitrosothiols mediated by Fe^II/Fe^III chloride complexes. The reaction of 2 equiv of S-nitrosothiol (Ph₃CSNO) with [Cl₆Fe^II₂]^2- results in facile release of NO^• and formation of iron(III) halothiolate. Detailed spectroscopic studies, including in situ UV-vis, IR, and Mössbauer spectroscopy, support the interaction of the S atom with the Fe^II center. This is in contrast to the proposed mechanism of NO^• release from the well-studied "red product" κ¹-N bound S-nitrosothiol Fe^II complex, [(CN)₅Fe(κ¹-N-RSNO)]^3-. Additionally, Fe^III chloride can mediate NO^• storage through the formation of S-nitrosothiols. Treatment of iron(III) halothiolate with 2 equiv of NO^• regenerates Ph₃CSNO with the Fe^II source trapped as the S = 3/2 {FeNO}⁷ species [Cl₃FeNO]^-, which is inert toward further coordination and activation of S-nitrosothiols. Our work demonstrates how labile iron can mediate the interconversion of NO^•/thiolate and S-nitrosothiol, which has important implications toward how Nature manages the biological concentration of free NO^•.

Kinetic studies on the reaction of NO with iron(ii) complexes using low temperature stopped-flow techniques

Low temperature stopped-flow techniques were used to investigate the reaction of three different iron(ii) complexes with nitrogen monoxide. The kinetic studies allowed calculation of the activation parameters from the corresponding Eyring plots for all three systems. The reaction of iron(ii) chloride with NO leading to the formation of MNIC (mononitrosyl-iron-complex) and DNIC (dinitrosyl-iron-complex) led to activation parameters of ΔH^‡ = 55.4 ± 0.4 kJ mol^-1 and ΔS^‡ = 13 ± 2 J K^-1 mol^-1 for MNIC and ΔH^‡ = 32 ± 6 kJ mol^-1 and ΔS^‡ = -193 ± 21 J K^-1 mol^-1 for DNIC. Formation of MNIC turned out to be much faster in comparison with DNIC. In contrast, activation parameters for the formation of monoculear [Fe(bztpen)(NO)](OTf)₂ (bztpen = N-benzyl-N,N',N'-tris(2-pyridylmethyl)-ethylenediamine) ΔH^‡ = 17.8 ± 0.8 kJ mol^-1 and ΔS^‡ = -181 ± 3 J K^-1 mol^-1 supported an associative mechanism. Interestingly, [Fe(bztpen)(CH₃CN)](OTf)₂ does not react with dioxygen at all. Furthermore, activation parameters of ΔH^‡ = 37.7 ± 0.7 kJ mol^-1 and ΔS^‡ = -66 ± 3 J K^-1 mol^-1 were obtained for the reaction of NO with the dinuclear iron(ii) H-HPTB complex (H-HPTB = N,N,N',N'-tetrakis(2-benzimidazolylmethyl)-2-hydroxy-1,3-diaminopropane), [Fe₂(H-HPTB)(Cl)₃]. The kinetic data allowed postulation of the mechanisms for all of these reactions.

Nitrogenase-mimic iron-containing chalcogels for photochemical reduction of dinitrogen to ammonia

A nitrogenase-inspired biomimetic chalcogel system comprising double-cubane [Mo2Fe6S8(SPh)3] and single-cubane (Fe4S4) biomimetic clusters demonstrates photocatalytic N2 fixation and conversion to NH3 in ambient temperature and pressure conditions. Replacing the Fe4S4 clusters in this system with other inert ions such as Sb(3+), Sn(4+), Zn(2+) also gave chalcogels that were photocatalytically active. Finally, molybdenum-free chalcogels containing only Fe4S4 clusters are also capable of accomplishing the N2 fixation reaction with even higher efficiency than their Mo2Fe6S8(SPh)3-containing counterparts. Our results suggest that redox-active iron-sulfide-containing materials can activate the N2 molecule upon visible light excitation, which can be reduced all of the way to NH3 using protons and sacrificial electrons in aqueous solution. Evidently, whereas the Mo2Fe6S8(SPh)3 is capable of N2 fixation, Mo itself is not necessary to carry out this process. The initial binding of N2 with chalcogels under illumination was observed with in situ diffuse-reflectance Fourier transform infrared spectroscopy (DRIFTS). (15)N2 isotope experiments confirm that the generated NH3 derives from N2 Density functional theory (DFT) electronic structure calculations suggest that the N2 binding is thermodynamically favorable only with the highly reduced active clusters. The results reported herein contribute to ongoing efforts of mimicking nitrogenase in fixing nitrogen and point to a promising path in developing catalysts for the reduction of N2 under ambient conditions.

Synthetic modeling chemistry of iron-sulfur clusters in nitric oxide signaling

Nitric oxide (NO) is an important signaling molecule that is involved in many physiological and pathological functions. Iron-sulfur proteins are one of the main reaction targets for NO, and the [Fe-S] clusters within these proteins are converted to various iron nitrosyl species upon reaction with NO, of which dinitrosyl iron complexes (DNICs) are the most prevalent. Much progress has been made in identifying the origin of cellular DNIC generation. However, it is not well-understood which other products besides DNICs may form during [Fe-S] cluster degradation nor what effects DNICs and other degradation products can have once they are generated in cells. Even more elusive is an understanding of the manner by which cells cope with unwanted [Fe-S] modifications by NO. This Account describes our synthetic modeling efforts to identify cluster degradation products derived from the [2Fe-2S]/NO reaction in order to establish their chemical reactivity and repair chemistry. Our intent is to use the chemical knowledge that we generate to provide insight into the unknown biological consequences of cluster modification. Our recent advances in three different areas are described. First, new reaction conditions that lead to the formation of previously unrecognized products during the reaction of [Fe-S] clusters with NO are identified. Hydrogen sulfide (H2S), a gaseous signaling molecule, can be generated from the reaction between [2Fe-2S] clusters and NO in the presence of acid or formal H• (e(-)/H(+)) donors. In the presence of acid, a mononitrosyl iron complex (MNIC) can be produced as the major iron-containing product. Second, cysteine analogues can efficiently convert MNICs back to [2Fe-2S] clusters without the need for any other reagents. This reaction is possible for cysteine analogues because of their ability to labilize NO from MNICs and their capacity to undergo C-S bond cleavage, providing the necessary sulfide for [2Fe-2S] cluster formation. Lastly, unique dioxygen reactivity of various types of DNICs has been established. N-bound neutral {Fe(NO)2}(10) DNICs react with O2 to generate low-temperature stable peroxynitrite (ONOO(-)) species, which then carry out nitration chemistry in the presence of phenolic substrates, relevant to tyrosine nitration chemistry. The reaction between S-bound anionic {Fe(NO)2}(9) DNICs and O2 results in the formation of Roussin's red esters (RREs) and thiol oxidation products, chemistry that may be important in biological cysteine oxidation. The N-bound cationic {Fe(NO)2}(9) DNICs can spontaneously release NO, and this property can be utilized in developing a new class of NO-donating agents with anti-inflammatory activity.

Mechanistic investigations reveal that dibromobimane extrudes sulfur from biological sulfhydryl sources other than hydrogen sulfide†Electronic supplementary information (ESI) available: Experimental details, pH stability data for BTE, NMR spectra. See DOI: 10.1039/c4sc01875cClick here for additional data file

Dibromobimane detects sulfide levels as low as 0.6 pM, but reacts in unexpected ways with thiols, as evidenced by mechanistic investigations.

Hydrogen sulfide (H₂S) has emerged as an important biological signaling molecule in the last decade. During the growth of this field, significant controversy has arisen centered on the physiological concentrations of H₂S. Recently, a monobromobimane (mBB) method has been developed for the quantification of different biologically-relevant sulfide pools. Based on the prevalence of the mBB method for sulfide quantification, we expand on this method to report the use of dibromobimane (dBB) for sulfide quantification. Reaction of H₂S with dBB results in formation of highly-fluorescent bimane thioether (BTE), which is readily quantifiable by HPLC. Additionally, the reaction of sulfide with dBB to form BTE is significantly faster than the reaction of sulfide with mBB to form sulfide dibimane. Using the dBB method, BTE levels as low as 0.6 pM can be detected. Upon use of the dBB method in wild-type and CSE^–/– mice, however, dBB reports significantly higher sulfide levels than those measured using mBB. Further investigation revealed that dBB is able to extract sulfur from other sulfhydryl sources including thiols. Based on mechanistic studies, we demonstrate that dBB extracts sulfur from thiols with α- or β-hydrogens, thus leading to higher BTE formation than from sulfide alone. Taken together, the dBB method is a highly sensitive method for H₂S but is not compatible for use in studies in which other thiols are present.

Proton-induced reactivity of NO⁻ from a {CoNO}⁸ complex

Research on the one-electron reduced analogue of NO, namely nitroxyl (HNO/NO(-)), has revealed distinguishing properties regarding its utility as a therapeutic. However, the fleeting nature of HNO requires the design of donor molecules. Metal nitrosyl (MNO) complexes could serve as potential HNO donors. The synthesis, spectroscopic/structural characterization, and HNO donor properties of a {CoNO}(8) complex in a pyrrole/imine ligand frame are reported. The {CoNO}(8) complex [Co(LN4(PhCl))(NO)] (1) does not react with established HNO targets such as Fe(III) hemes or Ph3P. However, in the presence of stoichiometric H(+) 1 behaves as an HNO donor. Complex 1 readily reacts with [Fe(TPP)Cl] or Ph3P to afford the {FeNO}(7) porphyrin or Ph3P═O/Ph3P═NH, respectively. In the absence of an HNO target, the {Co(NO)2}(10) dinitrosyl (3) is the end product. Complex 1 also reacts with O2 to yield the corresponding Co(III)-η(1)-ONO2 (2) nitrato analogue. This report is the first to suggest an HNO donor role for {CoNO}(8) with biotargets such as Fe(III)-porphyrins.