Unexpected electronic process of H2 activation by a new nickel borane complex: comparison with the usual homolytic and heterolytic activations

Dihydrogen Cleavage by a Zinc-Zinc Bond of a Heteroleptic Dizinc(I) Cation

Oxidative addition of dihydrogen across a metal-metal bond to form reactive metal hydrides in homogeneous catalysis is known for transition metals but not for zinc(I)-zinc(I) bond as found in Carmona's eponymous dizinconene [Zn2Cp*2] (Cp* = η5-C5Me5). Dihydrogen reacted with the heteroleptic zinc(I)-zinc(I) bonded cation [(L2)Zn-ZnCp*][BAr4F] (L2 = TMEDA, N,N,N',N'-tetramethylethylenediamine, TEEDA, N,N,N',N'-tetraethylethylenediamine; ArF = 3,5-(CF3)2C6H3) under 2 bar at 80 °C to give the zinc(II) hydride cation [(L2)ZnH(thf)][BAr4F] along with zinc metal and Cp*H derived from the intermediate [Cp*ZnH]. DFT calculations show that the cleavage of dihydrogen occurs through a highly unsymmetrical transition state. Mechanistic studies agree with a heterolytic cleavage of dihydrogen as a result of the cationic charge and unsymmetrical ligand coordination. To explore the existence of zinc(I) hydride, thermally unstable hydridotriphenylborate complexes of zinc(I) [(L2)Zn(HBPh3)-ZnCp*] (L2 = TMEDA, TEEDA; TMPDA, N,N,N',N'-tetramethyl-1,3-propylenediamine) have been prepared by salt metathesis and were shown to undergo fast exchange with both BPh3 and [HBPh3]-.

Tridentate NacNac Tames T-Shaped Nickel(I) Radical

The reaction of a nickel(II) chloride complex containing a tridentate β-diketiminato ligand with a picolyl group [2,6-iPr2 -C6 H3 NC(Me)CHC(Me)NH(CH2 py)]Ni(II)Cl (1)] with KSi(SiMe3 )3 conveniently afforded a nickel(I) radical with a T-shaped geometry (2). The compound's metalloradical nature was confirmed through electron paramagnetic resonance (EPR) studies and its reaction with TEMPO, resulting in the formation of a highly unusual three-membered nickeloxaziridine complex (3). When reacted with disulfide and diselenide, the S-S and Se-Se bonds were cleaved, and a coupled product was formed through carbon atom of the pyridine-imine group. The nickel(I) radical activates dihydrogen at room temperature and atmospheric pressure to give the monomeric nickel hydride.

Photochemical H2 activation by an Zn-Fe heterometallic: a mechanistic investigation

Addition of H2 to a Zn-Fe complex was observed to occur under photochemical conditions (390 or 428 nm LED) and leads to the formation of a heterometallic dihydride complex. The reaction does not occur under thermal conditions and DFT calculations suggest this is an endergonic, light driven process. Through a combined experimental and computational approach, the plausible mechanisms for H2 activation were investigated. Inhibition experiments, double-label cross-over experiments, radical trapping experiments, EPR spectroscopy and DFT calculations were used to gain insight into this system. The combined data are consistent with two plausible mechanisms, the first involving ligand dissociation followed by oxidative addition of H2 at the Fe centre, the second involving homolytic fragmentation of the Zn-Fe heterometallic and formation of radical intermediates.

Feature Analysis in High-Dimensional Data: Structure-Activity Relationships of Lewis Acid-Transition-Metal Complex-Catalyzed H2 Activation

Lewis acid-transition metal (LA-TM) catalysts have been proven to have an advantage in catalyzing hydrogen activation. Herein, a high-dimensional structure-activity relationship study is performed for LA-TM-catalyzed hydrogen activation by density functional theory calculations. The DPB-Ni complex is taken as the representative catalyst, and the explored Lewis acid sites and transition-metal centers include B, Al, Ga and Ni, Pd, Pt, respectively. Totally, four general hydrogen activation mechanisms are systematically studied among the nine catalytic systems. The Ga-Ni system undergoes the lowest free energy of activation (11.0 kcal/mol), which is considered to be the optimal combination of the Lewis acid site and transition-metal center. Furthermore, more than 100 parameters are used to analyze the structure-activity relationship, including the physical structure, the bond order, the atom charge, and many other properties. Key parameters of important structures are dug out to show a high correlation with the activity of the LA-TM systems, including the M-H₂ distance, the H-H bond length, the second-order perturbation stabilization energy of M-H₂, the bond order of the LA-TM, and so on. The multivariable analysis indicates that the feature related to the basic elemental properties and the global feature codetermine the activity of the catalyst. In the LA-TM system, the combination of Ip_LA/Ip_TM (Ip, the first ionization energy, the feature related to basic elemental properties) and the chemical hardness (the global feature) can better explain the activity of the catalyst. The Ip_LA/Ip_TM reflects the difficulty of breaking the LA-TM bond, affecting the reaction site of activating hydrogen. The hardness reflects the stability and reactivity of LA-TM-RC complexes. The above two features with the addition of the LA-TM bond length (the local feature) can better reflect the activity of the LA-TM system-catalyzed H₂ activation. The feature combinations and the method of multidimensional data analysis should be informative guidance for the rational design of efficient LA-TM catalysts for H₂ activation.

Reversible Dihydrogen Activation and Catalytic H/D Exchange with Group 10 Heterometallic Complexes

Reaction of a hexagonal planar palladium complex featuring a [PdMg₃ H₃ ] core with H₂ is reversible and leads to the formation of a new [PdMg₂ H₄ ] tetrahydride species alongside an equivalent of a magnesium hydride co-product [MgH]. While the reversibility of this process prevented isolation of [PdMg₂ H₄ ], analogous [PtMg₂ H₄ ] and [PtZn₂ H₄ ] complexes could be isolated and characterised through independent syntheses. Computational analysis (DFT, AIM, NCIPlot) of the bonding in a series of heterometallic tetrahydride compounds (Ni-Pt; Mg and Zn) suggests that these complexes are best described as square planar with marginal metal-metal interactions; the strength of which increases slightly as group 10 is descended and increases from Mg to Zn. DFT calculations support a mechanism for H₂ activation involving a ligand-assisted oxidative addition to Pd. These findings were exploited to develop a catalytic protocol for H/D exchange into magnesium hydride and zinc hydride bonds.

Understanding, Modulating, and Leveraging Transannular M → Z Interactions

Density functional theory calculations have been performed on metallatranes featuring a group 13 elements at the bridgehead position to understand the factors that influence the nature of the M···Z (M = Fe, Co, Ni; Z = Al, Ga, In) interaction present in these complexes and the resultant reactivity at the metal center. The strength of the M···Z interaction increases with the increase in the size and polarizability of the bridgehead group 13 elements. The calculated reaction free energies (ΔG° values) for binding of different Lewis bases to the metallatranes are found to be significantly more exergonic for the larger In(III) ions. Quantum theory of atoms in molecules calculations reveal the covalent nature of the M···Z interactions, while the EDA-NOCV analysis indicates the strong binding ability of these metallatranes not only to different σ-donor and π-acceptor ligands but also to relatively inert species, such as N₂.

Rational design of the nickel-borane complex for efficient hydrogenation of styrene

The Ni-B complex 1^BCF with a facilely accessible monophosphine (P^t Bu₃ ) unit was theoretically designed, which was found to be more active than that with an ambiphilic ligand for hydrogenation of styrene. Substituting P^t Bu₃ with a stronger electron donating ligand N-heterocyclic carbene largely improves the activity of the Ni-B complex.

Splitting of multiple hydrogen molecules by bioinspired diniobium metal complexes: a DFT study

Splitting of molecular hydrogen (H₂) into bridging and terminal hydrides is a common step in transition metal chemistry. Herein, we propose a novel organometallic platform for cleavage of multiple H₂ molecules, which combines metal centers capable of stabilizing multiple oxidation states, and ligands bearing positioned pendant basic groups. Using quantum chemical modeling, we show that low-valent, early transition metal diniobium(ii) complexes with diphosphine ligands featuring pendant amines can favorably uptake up to 8 hydrogen atoms, and that the energetics are favored by the formation of intramolecular dihydrogen bonds. This result suggests new possible strategies for the development of hydrogen scavenger molecules that are able to perform reversible splitting of multiple H₂ molecules.

Ambiphilic boryl groups in a neutral Ni(ii) complex: a new activation mode of H2

The concept of metal-ligand cooperation opens new avenues for the design of catalytic systems that may offer alternative reactivity patterns to the existing ones. Investigations of this concept with ligands bearing a boron center in their skeleton established mechanistic pathways for the activation of small molecules in which the boron atom usually performs as an electrophile. Here, we show how this electrophilic behavior can be modified by the ligand trans to the boron center, evincing its ambiphilic nature. Treatment of diphosphinoboryl (PBP) nickel-methyl complex 1 with bis(catecholato)diboron (B2Cat2) allows for the synthesis of nickel(ii) bis-boryl complex 3 that promotes the clean and reversible heterolytic cleavage of dihydrogen leading to the formation of dihydroborate nickel complex 4. Density functional theory analysis of this reaction revealed that the heterolytic activation of H2 is facilitated by the cooperation of both boryl moieties and the metal atom in a concerted mechanism that involves a Ni(ii)/Ni(0)/Ni(ii) process. Contrary to 1, the boron atom from the PBP ligand in 3 behaves as a nucleophile, accepting a formally protic hydrogen, whereas the catecholboryl moiety acts as an electrophile, receiving the attack from the hydride-like fragment. This manifests the dramatic change in the electronic properties of a ligand by tuning the substituent trans to it and constitutes an unprecedented cooperative mechanism that involves two boryl ligands in the same molecule operating differently, one as a Lewis acid and the other one as a Lewis base, in cooperation with the metal. In addition, reactivity towards different nucleophiles such as amines or ammonia confirmed the electrophilic nature of the Bcat moiety, allowing the formation of aminoboranes.

Catalysis using transition metal complexes featuring main group metal and metalloid compounds as supporting ligands

Recent development in catalytic application of transition metal complexes having an M-E bond (E = main group metal or metalloid element), which is stabilized by a multidentate ligand, is summarized. Main group metal and metalloid supporting ligands furnish unusual electronic and steric environments and molecular functions to transition metals, which are not easily available with standard organic supporting ligands such as phosphines and amines. These characteristics often realize remarkable catalytic activity, unique product selectivity, and new molecular transformations. This perspective demonstrates the promising utility of main group metal and metalloid compounds as a new class of supporting ligands for transition metal catalysts in synthetic chemistry.

Theoretical studies on the N–X (X = Cl, O) bond activation mechanism in catalytic C–H amination

A favorable S_N2-type N–Cl bond cleavage mechanism are proposed for Rh-catalysed C–H amination, which also works for N–O bond cleavage in Rh, Ru, and Pd analogous systems. These results could provide new understanding of C–H amination.

Lewis Acid Transition-Metal-Catalyzed Hydrogen Activation: Structures, Mechanisms, and Reactivities

As a new type of bifunctional catalyst, the Lewis acid transition-metal (LA-TM) catalysts have been widely applied for hydrogen activation. This study presents a mechanistic framework to understand the LA-TM-catalyzed H₂ activation through DFT studies. The mer(trans)-homolytic cleavage, the fac(cis)-homolytic cleavage, the synergetic heterolytic cleavage, and the dissociative heterolytic cleavage should be taken as general mechanisms for the field of LA-TM catalysis. Four typical LA-TM catalysts, the Z-type κ⁴ -L₃ B-Rh complex tri(azaindolyl)borane-Rh, the X-type κ³ -L₂ B-Co complex bis-phosphino-boryl (PBP)-Co, the η² -BC-type κ³ -L₂ B-Pd complex diphosphine-borane (DPB)-Pd, and the Z-type κ² -LB-Pt complex (boryl)iminomethane (BIM)-Pt are selected as representative models to systematically illustrate their mechanistic features and explore the influencing factors on mechanistic variations. Our results indicate that the tri(azaindolyl)borane-Rh catalyst favors the synergetic heterolytic mechanism; the PBP-Co catalyst prefers the mer(trans)-homolytic mechanism; the DPB-Pd catalyst operates through the fac(cis)-homolytic mechanism, whereas the BIM-Pt catalyst tends to undergo the dissociative heterolytic mechanism. The mechanistic variations are determined by the coordination geometry, the LA-TM bonding nature, the electronic structure of the TM center, and the flexibility or steric effect of the LA ligands. The presented mechanistic framework should provide helpful guidelines for LA-TM catalyst design and reaction developments.

Hydrogenation and N-alkylation of anilines and imines via transfer hydrogenation with homogeneous nickel compounds

The nickel-catalyzed N-alkylation of a variety of arylamines via transfer hydrogenation in the absence of pressurized hydrogen and basic or acidic additives was achieved in a tandem reaction.

Well-Defined Heterobimetallic Reactivity at Unsupported Ruthenium-Indium Bonds

The hydride complex [Ru(IPr)₂ (CO)H][BAr^F₄ ], 1, reacts with InMe₃ with loss of CH₄ to form [Ru(IPr)₂ (CO)(InMe)(Me)][BAr^F₄ ], 4, featuring an unsupported Ru-In bond with unsaturated Ru and In centres. 4 reacts with H₂ to give [Ru(IPr)₂ (CO)(η² -H₂ )(InMe)(H)][BAr^F₄ ], 5, while CO induces formation of the indyl complex [Ru(IPr)₂ (CO)₃ (InMe₂ )][BAr^F₄ ], 7. These observations highlight the ability of Me to shuttle between Ru and In centres and are supported by DFT calculations on the mechanism of formation of 4 and its reactions with H₂ and CO. An analysis of Ru-In bonding in these species is also presented. Reaction of 1 with GaMe₃ also involves CH₄ loss but, in contrast to its In congener, sees IPr transfer from Ru to Ga to give a gallyl complex featuring an η⁶ interaction of one aryl substituent with Ru.

Functional group migrations between boron and metal centres within transition metal-borane and -boryl complexes and cleavage of H-H, E-H and E-E' bonds

This feature article examines some of the recent advances in the chemistry of Z-type transition metal-borane and X-type transition metal-boryl complexes. It focuses on the employment of these boron-based functionalities acting as stores and transfer agents for functional groups such as hydrides, alkyl groups and aryl groups which can either be abstracted or delivered to the metal centre. The review also explores the rather novel reactivity involving the cleavage of H-H, E-H and E-E' bonds (where E and E' are a range of groups) across the transition metal-boron bond in such complexes. It explores the early examples of the addition of H-H across transition metal-borane bonds and describes the new transformation in the context of other known modes of hydrogen activation including classic oxidative addition and heterolytic cleavage at transition metal centres as well as Frustrated Lewis Pair chemistry. Similar reactivity involving transition metal-boryl complexes are also described particularly those which undergo both boryl-to-borane and borane-to-borohydride transformations. The delivery of hydride to the metal centre in combination with the potential to regenerate the borohydride functional group via a recharging process is explored in the context of providing a new strategy for catalysis. Finally, a light-hearted look at the analogy of the 'stinging processes' involving Trofimenko type ligands is taken one step further to determine whether it is indeed in the nature of scorpionate ligands to repeatedly 'sting' just as the real life scorpions do.

Elucidating metal hydride reactivity using late transition metal boryl and borane hydrides: 2c–2e terminal hydride, 3c–2e bridging hydride, and 3c–4e bridging hydride

A general trend for the hydrogenation reactivity of metal hydride(s): 3c–4e bridging hydride > 2c–2e terminal hydride > 3c–2e bridging hydride.

Mo-Mo Quintuple Bond is Highly Reactive in H-H, C-H, and O-H σ-Bond Cleavages Because of the Polarized Electronic Structure in Transition State

The recently reported high reactivity of the Mo-Mo quintuple bond of Mo₂(N^∧N)₂ (1) {N^∧N = μ-κ²-CH[N(2,6-iPr₂C₆H₃)]₂} in the H-H σ-bond cleavage was investigated. DFT calculations disclosed that the H-H σ-bond cleavage by 1 occurs with nearly no barrier to afford the cis-dihydride species followed by cis-trans isomerization to form the trans-dihydride product, which is consistent with the experimental result. The O-H and C-H bond cleavages by 1 were computationally predicted to occur with moderate (ΔG°^⧧ = 9.0 kcal/mol) and acceptable activation energies (ΔG°^⧧ = 22.5 kcal/mol), respectively, suggesting that the Mo-Mo quintuple bond can be applied to various σ-bond cleavages. In these σ-bond cleavage reactions, the charge-transfer (CT_Mo→XH) from the Mo-Mo quintuple bond to the X-H (X = H, C, or O) bond and that (CT_XH→Mo) from the X-H bond to the Mo-Mo bond play crucial roles. Though the HOMO (dδ-MO) of 1 is at lower energy and the LUMO + 2 (dδ*-MO) of 1 is at higher energy than those of RhCl(PMe₃)₂ (LUMO and LUMO + 1 of 1 are not frontier MO), the H-H σ-bond cleavage by 1 more easily occurs than that by the Rh complex. Hence, the frontier MO energies are not the reason for the high reactivity of 1. The high reactivity of 1 arises from the polarization of dδ-type MOs of the Mo-Mo quintuple bond in the transition state. Such a polarized electronic structure enhances the bonding overlap between the dδ-MO of the Mo-Mo bond and the σ*-antibonding MO of the X-H bond to facilitate the CT_Mo→XH and reduce the exchange repulsion between the Mo-Mo bond and the X-H bond. This polarized electronic structure of the transition state is similar to that of a frustrated Lewis pair. The easy polarization of the dδ-type MOs is one of the advantages of the metal-metal multiple bond, because such polarization is impossible in the mononuclear metal complex.

Fluorescent Chemosensors for Selective and Sensitive Detection of Phosmet/Chlorpyrifos with Octahedral Ni(2+) Complexes

The hexadentate ligands H2L1-L3 with mixed S, N, O donor sites and possessing substituents having either "no" or electron-releasing/withdrawing nature at terminal ends are synthesized. The ligands H2L1-L3 were tested for binding with library of metal ions, wherein maximum efficiency was observed with Ni(2+), and it motivated us to prepare the Ni(2+) complexes. The ligand H2L1 underwent deprotonation and formed binuclear complex when interacted with Ni(2+) as evident from its crystal structure. The H2L2 and H2L3 having electron-withdrawing/electron releasing groups, respectively, were also deprotonated; however, they afforded mononuclear complexes with Ni(2+) ion. This signifies the importance of steric parameters instead of electronic factors in these particular cases. Impressed by differential behavior of complexes of H2L1 and H2L2/H2L3 with Ni(2+) and their photophysical and electrochemical properties, all the metal complexes were studied for their chemosensing ability. Nowadays with increased use of organophosphate, there is alarming increase of these agents in the environment, and thus we require efficient technique to estimate the level of these agents with high sensitivity and selectivity in aqueous medium. The Ni(2+) complexes with hydrophobic nature were suspended into aqueous medium for testing them as sensor for organophosphate. The (L1)2.(Ni(2+))2 could sense phosmet with detection limit of 44 nM, whereas L2.Ni(2+) and L3.Ni(2+) exhibited the detection limits of 62 and 71 nM, respectively, for chlorpyrifos.

Complexes of ambiphilic ligands: reactivity and catalytic applications

This review focuses on the way Lewis acids of ambiphilic ligands influence the reactivity of transition metal complexes and on the new perspectives this opens in catalysis.

Activation of Strong Boron-Fluorine and Silicon-Fluorine σ-Bonds: Theoretical Understanding and Prediction

The oxidative addition of BF3 to a platinum(0) bis(phosphine) complex [Pt(PMe3)2] (1) was investigated by density functional calculations. Both the cis and trans pathways for the oxidative addition of BF3 to 1 are endergonic (ΔG°=26.8 and 35.7 kcal mol(-1), respectively) and require large Gibbs activation energies (ΔG°(≠)=56.3 and 38.9 kcal mol(-1), respectively). A second borane plays crucial roles in accelerating the activation; the trans oxidative addition of BF3 to 1 in the presence of a second BF3 molecule occurs with ΔG°(≠) and ΔG° values of 10.1 and -4.7 kcal mol(-1), respectively. ΔG°(≠) becomes very small and ΔG° becomes negative. A charge transfer (CT), F→BF3, occurs from the dissociating fluoride to the second non-coordinated BF3. This CT interaction stabilizes both the transition state and the product. The B-F σ-bond cleavage of BF2Ar(F) (Ar(F)=3,5-bis(trifluoromethyl)phenyl) and the B-Cl σ-bond cleavage of BCl3 by 1 are accelerated by the participation of the second borane. The calculations predict that trans oxidative addition of SiF4 to 1 easily occurs in the presence of a second SiF4 molecule via the formation of a hypervalent Si species.

The use of localised orbitals for the bonding and mechanistic analysis of organometallic compounds

Through a series of examples we show how, upon orbital localisation, the outcome of an electronic structure calculation reveals features, such as bonding and oxidation states, which are controversial to grasp by alternative methods. The approach can also be applied to the analysis of reaction mechanisms. Because of the insight it provides in a limited execution time, we believe that this approach, known since the early developments of computational quantum chemistry, could find wider applications in the organometallic community than it actually has and facilitate communication between computational and experimental chemists.