Green and Facile Synthesis of Water-Soluble Cu–In–S/ZnS Core/Shell Quantum Dots

Ultrafast Electron Transfer from CuInS2 Quantum Dots to a Molecular Catalyst for Hydrogen Production: Challenging Diffusion Limitations

Systems integrating quantum dots with molecular catalysts are attracting ever more attention, primarily owing to their tunability and notable photocatalytic activity in the context of the hydrogen evolution reaction (HER) and CO2 reduction reaction (CO2RR). CuInS2 (CIS) quantum dots (QDs) are effective photoreductants, having relatively high-energy conduction bands, but their electronic structure and defect states often lead to poor performance, prompting many researchers to employ them with a core-shell structure. Molecular cobalt HER catalysts, on the other hand, often suffer from poor stability. Here, we have combined CIS QDs, surface-passivated with l-cysteine and iodide from a water-based synthesis, with two tetraazamacrocyclic cobalt complexes to realize systems which demonstrate high turnover numbers for the HER (up to >8000 per catalyst), using ascorbate as the sacrificial electron donor at pH = 4.5. Photoluminescence intensity and lifetime quenching data indicated a large degree of binding of the catalysts to the QDs, even with only ca. 1 μM each of QDs and catalysts, linked to an entirely static quenching mechanism. The data was fitted with a Poissonian distribution of catalyst molecules over the QDs, from which the concentration of QDs could be evaluated. No important difference in either quenching or photocatalysis was observed between catalysts with and without the carboxylate as a potential anchoring group. Femtosecond transient absorption spectroscopy confirmed ultrafast interfacial electron transfer from the QDs and the formation of the singly reduced catalyst (CoII state) for both complexes, with an average electron transfer rate constant of ≈ (10 ps)-1. These favorable results confirm that the core tetraazamacrocyclic cobalt complex is remarkably stable under photocatalytic conditions and that CIS QDs without inorganic shell structures for passivation can act as effective photosensitizers, while their smaller size makes them suitable for application in the sensitization of, inter alia, mesoporous electrodes.

Chiroptically Active Multi-Modal Calcium Carbonate-Based Nanocomposites

The development of multimodal nano- and micro-structures has become an increasingly popular area of research in recent years. In particular, the combination of two or more desirable properties within a single structure opens multiple opportunities from biomedicine, sensing, and catalysis, to a variety of optical applications. Here, for the first time, we report the synthesis and characterization of multimodal chiroptically active CaCO3 nanocomposites. These composites have been prepared by a modified microemulsion method in the presence of an amino acid (cysteine). Following this, additional modalities have been introduced by loading the composites with luminescent nanoparticles or doping with Eu3+ ions. The luminescent composites have been produced by the incorporation of CuInZnS/ZnS or CdSe@ZnS/ZnS core/shell quantum dots, or via doping with trivalent europium. In this manner, we have produced chiroptically active composites with orange, green, and red luminescence. Overall, this work demonstrates the unique advantage and potential of our approach and new class of chiroptically active CaCO3 nanocomposites, which display tunable functionality to specific requirements via the incorporation of desired ions, nanoparticles, and chirality of the structure.

Synthesis and hybridization of CuInS2 nanocrystals for emerging applications

Copper indium sulfide (CuInS2) is a ternary A(I)B(III)X(VI)2-type semiconductor featuring a direct bandgap with a high absorption coefficient. In attempts to explore their practical applications, nanoscale CuInS2 has been synthesized with crystal sizes down to the quantum confinement regime. The merits of CuInS2 nanocrystals (NCs) include wide emission tunability, a large Stokes shift, long decay time, and eco-friendliness, making them promising candidates in photoelectronics and photovoltaics. Over the past two decades, advances in wet-chemistry synthesis have achieved rational control over cation-anion reactivity during the preparation of colloidal CuInS2 NCs and post-synthesis cation exchange. The precise nano-synthesis coupled with a series of hybridization strategies has given birth to a library of CuInS2 NCs with highly customizable photophysical properties. This review article focuses on the recent development of CuInS2 NCs enabled by advanced synthetic and hybridization techniques. We show that the state-of-the-art CuInS2 NCs play significant roles in optoelectronic and biomedical applications.

ZnS QDs Stabilized Concurrently with Glutathione and L-cysteine for Highly Sensitive Determining Adriamycin Based on the Fluorescence Enhancement Mechanism

In this work, a facile and fast aqueous-phase synthetic method is proposed to prepare water-soluble ZnS quantum dots stabilized simultaneously with glutathione and L-cysteine (ZnS QDs-GSH/L-Cys). As-synthesized ZnS QDs-GSH/L-Cys were monodispersed spherical nanocrystals with a mean diameter of 5.0 ± 0.7 nm. Besides, the obtained ZnS QDs-GSH/L-Cys emitted more intensive blue fluorescence and exhibited an improved stability in aqueous solution compared with ZnS quantum dots merely stabilized with GSH (ZnS QDs-GSH). Interestingly, Adriamycin, a representative anticancer drug, was added into the solution of ZnS QDs-GSH/L-Cys, the blue fluorescence of ZnS QDs-GSH/L-Cys was greatly enhanced instead of being quenched, which indicated that ZnS QDs-GSH/L-Cys can be used as an enhanced-fluorescence nanoprobe for determining Adriamycin. The observed fluorescent enhancement could be attributed to the blocking of photoinduced electron transfer (PET) in ZnS QDs-GSH/L-Cys due to the electrostatic interaction between the -COO- groups on the surface of quantum dots and the -NH3+ groups in Adriamycin, followed by the coordination interaction among ZnS QDs-GSH/L-Cys and Adriamycin. The fluorescence intensity of ZnS QDs-GSH/L-Cys presented a good linear response with the concentration of Adriamycin ranging from 2.0 to 20 µg•mL-1. The proposed fluorescent nanoprobe exhibited an excellent sensitivity with the LOD of 0.1 µg•mL-1 and a good accuracy for detecting Adriamycin.

Single-Particle Dynamics of ZnS Shelling Induced Replenishment of Carrier Diffusion for Individual Emission Centers in CuInS2 Quantum Dots

Insights into blinking and photoactivation of aqueous copper indium sulfide (CIS) quantum dots have been obtained using fluorescence correlation spectroscopy (FCS) and fluorescence lifetime correlation spectroscopy (FLCS). An unusual excitation wavelength-dependence of photoactivation/photocorrosion is manifested in an increase in the initial correlation amplitude G(0) for λ_ex = 532 nm, but a decrease for λ_ex = 405 nm. This has been rationalized in terms of different contributions from surface-assisted recombination in the two cases. Blinking times obtained from the autocorrelation functions (ACFs) of the 100-200 ns lifetime component (core Cu-mediated recombination) are almost unaffected by shelling, but those from the ACF for the 10-30 ns lifetime (surface states) increase significantly. Absence of cross-correlation between the two recombinative states of bare CIS QDs and the emergence of an anticorrelation with the introduction of the ZnS shell are observed, indicating the diffusive nature of the two states for CIS-ZnS. The diffusion is inhibited in bare CIS QDs due to the preponderance of surface states.

Realization of a Model-Free Pathway for Quantum Dot-Protein Interaction Beyond Classical Protein Corona or Protein Complex

Although in recent times nanoparticles (NPs) are being used in various biological applications, their mechanism of binding interactions still remains hazy. Usually, the binding mechanism is perceived to be mediated through either the protein corona (PC) or protein complex (PCx). Herein, we report that the nanoparticle (NP)-protein interaction can also proceed via a different pathway without forming the commonly observed PC or PCx. In the present study, the NP-protein interaction between less-toxic zinc-silver-indium-sulfide (ZAIS) quantum dots (QDs) and bovine serum albumin (BSA) was investigated by employing spectroscopic and microscopic techniques. Although the analyses of data obtained from fluorescence and thermodynamic studies do indicate the binding between QDs and BSA, they do not provide clear experimental evidence in favor of PC or PCx. Quite interestingly, high-resolution transmission electron microscopy (HRTEM) studies have shown the formation of a new type of species where BSA protein molecules are adsorbed onto some portion of a QD surface rather than the entire surface. To the best of our knowledge, we believe that this is the first direct experimental evidence in favor of a model-free pathway for NP-protein interaction events. Thus, the outcome of the present study, through experimental evidence, clearly suggests that NP-protein interaction can proceed by following a pathway that is different from classical PC and PCx.

High Photoluminescence Polyindole/CuInS Quantum Dots for Pb Ions Sensor

Polyindole is considered an excellent conducting polymer with interested properties for different applications. A novel polyindole (PIn)/CuInS (CIS)/ZnS quantum dots (QDs) nanocomposite was synthesized via in situ polymerization of PIn in presence of CIS/ZnS QDs. By investigating the effect of CIS/ZnS QDs on optical properties of PIn, it was found that the optical band gaps of PIn, CIS/ZnS QDs, and PIn/CIS/ZnS QDs nanocomposite were 3.24 eV, 4.68 eV and 3.44 eV, respectively. From the luminance spectra, it was observed that emission peaks of PIn at 442 and 468 nm are independent of the excitation wavelength with the highest intensity at excitation wavelength of 380 nm. However, the luminance spectrum of PIn/CIS/ZnS QDs nanocomposite exhibited a quenching peak for CIS/ZnS QDs while the intensity of PIn peak was enhanced. High resolution of transmission electron microscope image of CIS/ZnS QDs revealed nanocrystals with a size of 3–4.5 nm and lattice space of 0.2 nm. PIn/CIS/ZnS QDs nanocomposite as the fluorescent probe was employed for sensing different concentrations of Pb2+ from 5 to 50 ppb. The reaction between PIn/CIS/ZnS QDs and Pb2+ was slightly quenched and fixed after 90 min. The emission peak was reduced gradually with increasing concentration of lead via photo-induced electron transfer or ion exchange mechanism. The value of correlation coefficient (R2) was 0.99, the sensitivity was 0.0041 ppb−1 and limit of detection value was 4.48 ppb.

Robust direct Z-scheme exciton transfer dynamics by architecting 3D BiOI MF-supported non-stoichiometric Cu0.75In0.25S NC nanocomposite for co-catalyst-free photocatalytic hydrogen evolution

Designing promising photocatalytic systems with wide photon absorption and better exciton separation ability is a cutting-edge technology for enhanced solar-light-driven hydrogen production. In this context, non-stoichiometric Cu0.75In0.25S nanocrystals (CIS NCs) coupled with three-dimensional (3D) BiOI micro-flowers (BOI MFs) were synthesized through an ultra-sonication strategy forming a CIS-BOI heterojunction, which was well supported by XRD, photocurrent, XPS and Mott-Schottky analyses. Further, the co-catalyst-free CIS-BOI binary hybrid shows improved hydrogen evolution, i.e., 588.72 μmol h-1, which is 3.2 times greater than the pristine CIS NC (183.97 μmol h-1). Additionally, the binary composite confers an apparent conversion efficiency (ACE) of 9.44% (8.90 × 1016 number of H2 molecule per sec), which is extensively attributed to the robust charge carrier separation and transfer efficiency via the direct Z-scheme mechanism (proved through superoxide and H2 evolution activity). Moreover, the broad photon absorption range and productive exciton separation over the CIS-BOI composite are substantially justified by UV-Vis DRS, PL, EIS and photocurrent measurements.

A review on I–III–VI ternary quantum dots for fluorescence detection of heavy metals ions in water: optical properties, synthesis and application

Ternary I–III–VI quantum dots used in the fluorescence detection of heavy metals ions in water.

Origin of photoluminescence of water-soluble CuInS2 quantum dots prepared via a hydrothermal method

This study was performed to investigate the origin of the photoluminescence (PL) properties of hydrothermally-synthesized water-soluble CuInS₂ (CIS) quantum dots (QDs). The corresponding PL decay profiles, time-resolved PL spectra, and excitation intensity dependence of the PL spectra were evaluated. The decay profiles exhibited a strong dependence on the detection energy, and the peak of the time-resolved PL spectra shifted to lower energies with increasing time. With increasing excitation light intensity, the PL peak shifted to the high-energy side. These experimental results were consistent with the characteristics of donor–acceptor pair emission. The PL properties of Cu-doped and non-doped CdSe QDs, which show Cu-related and defect-related PL emission, respectively, were compared. Based on these results, it was concluded that donor–acceptor pair emission is the underlying mechanism of the PL of the hydrothermally-synthesized water-soluble CIS QDs.

The donor–acceptor pair emission is the underlying mechanism of the PL of the hydrothermally-synthesized water-soluble CIS QDs.

Preparation of a Water-Soluble ZnX Cd1-X S Quantum Dot Photocatalyst at Room Temperature Assisted by 3-Mercaptopropionic Acid

An effective path to synthesize Zn_x Cd_1-x S quantum dots (ZCS QDs) in aqueous phase at room temperature has remained relatively unexplored. Here, we developed a room-temperature, aqueous-phase approach to ZCS QDs, using 3-mercaptopropionic acid (MPA) to adjust the pH of the reaction precursor solution to regulate the competition between sulfur source and hydroxyl group, and realize the large-scale preparation of water-soluble ZCS QDs photocatalyst at room temperature. Without recombination with other materials, and only by regulating the ratio of pH, excess sulfur sources and Zn/Cd, the photocatalytic degradation of rhodamine B (RhB) can reach 98% within 1 min, showing high photocatalytic activity. ZCS QDs show high stability and recoverability, and are expected to be able to deal with organic pollutants on a large scale. This study provides a new idea for the preparation of other QDs at room temperature.

Low-Triggering-Potential Electrochemiluminescence from Surface-Confined CuInS2@ZnS Nanocrystals and their Biosensing Applications

Electrochemiluminescence (ECL) of low triggering potential is strongly anticipated for ECL assays with less inherent electrochemical interference and improved long-term stability of the working electrode. Herein, effects of the thiol capping agents and the states of luminophores, i.e., the thiol-capped CuInS₂@ZnS nanocrystals (CuInS₂@ZnS-Thiol), on the ECL triggering potential of CuInS₂@ZnS-Thiol/N₂H₄·H₂O were explored on the Au working electrode. The thiol capping agent of glutathione (GSH) not only enabled CuInS₂@ZnS-Thiol/N₂H₄·H₂O with the stronger oxidative-reduction ECL than other thiol capping agents but also demonstrated the largest shift for the ECL triggering potential of CuInS₂@ZnS-Thiol/N₂H₄·H₂O upon changing the luminophores from the monodispersed state to the surface-confined state. CuInS₂@ZnS-GSH/N₂H₄·H₂O exhibited an efficient oxidative-reduction ECL around 0.78 V (vs Ag/AgCl) with CuInS₂@ZnS-GSH of the monodispersed state. Upon employing CuInS₂@ZnS-GSH as the ECL tag and immobilizing them onto the Au working electrode, the oxidative-reduction ECL of CuInS₂@ZnS-GSH/N₂H₄·H₂O was lowered to 0.32 V (vs Ag/AgCl), which was about 0.88 V lower than that of traditional Ru(bpy)₃²⁺/TPrA (typically ∼1.2 V, vs Ag/AgCl). The ECL of the CuInS₂@ZnS-GSH/N₂H₄·H₂O system with the luminophore of both monodispersed and surface-confined states was spectrally identical to each other, indicating that this surface-confining strategy exhibited negligible effect on the excited state for the ECL of CuInS₂@ZnS-GSH. A surface-confined ECL sensor around 0.32 V was fabricated with CuInS₂@ZnS-GSH as a luminophore, which could sensitively and selectively determine the K-RAS gene from 1 to 500 pM with a limit of detection at 0.5 pmol L^-1 (S/N = 3).

Luminescent copper indium sulfide (CIS) quantum dots for bioimaging applications

Copper indium sulfide (CIS) quantum dots are ideal for bioimaging applications, by being characterized by high molar absorption coefficients throughout the entire visible spectrum, high photoluminescence quantum yield, high tolerance to the presence of lattice defects, emission tunability from the red to the near-infrared spectral region by changing their dimensions and composition, and long lifetimes (hundreds of nanoseconds) enabling time-gated detection to increase signal-to-noise ratio. The present review collects: (i) the most common procedures used to synthesize stable CIS QDs and the possible strategies to enhance their colloidal stability in aqueous environment, a property needed for bioimaging applications; (ii) their photophysical properties and parameters that affect the energy and brightness of their photoluminescence; (iii) toxicity and bioimaging applications of CIS QDs, including tumor targeting, time-gated detection and multimodal imaging, as well as theranostics. Future perspectives are analyzed in view of advantages and potential limitations of CIS QDs compared to most traditional QDs.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Hydrazine Hydrate and Dissolved Oxygen-Triggered Near-Infrared Chemiluminescence from CuInS2@ZnS Nanocrystals for Bioassays

The overwhelming majority of commercially available chemiluminescence (CL) assays are conducted in the eye-visible region. Herein, a near-infrared (NIR) aqueous CL strategy was proposed with CuInS₂@ZnS nanocrystals (CIS@ZnS NCs) as emitters. Hydrazine hydrate (N₂H₄·H₂O) could inject electrons into the conduction band of the CIS@ZnS NCs and simultaneously transformed to the intermediate radical N₂H₃^•. N₂H₃^• reduced dissolved oxygen (O₂) to O₂^-•, while the O₂^-• could inject holes into the valence band of the CIS@ZnS NCs. The recombination of electrons and holes at Cu⁺ defects in CIS@ZnS NCs eventually yielded efficient NIR CL at around 824.1 nm, which is the longest waveband for NCs CL to the best of our knowledge. The NIR CL could be conveniently performed in the neutral aqueous medium (pH 7.0) with a quantum yield of 0.0155 Einstein/mol and was successfully employed for constructing a signal-off CL biosensor with ascorbic acid as the analyte as well as a signal-on CL biosensor for determining ascorbate oxidase, which indicates that this NIR CL system has a promising potential for bioassays in diverse ways.

Nanocomposite of CuInS/ZnS and Nitrogen-Doped Graphene Quantum Dots for Cholesterol Sensing

In this paper, nitrogen graphene quantum dots (N-GQDs) and copper indium sulfide/zinc sulfide (CIS/ZnS) QDs were synthesized via facile hydrothermal and aqueous solution routes, respectively. Herein, a fluorescent nanocomposite has been synthesized between N-GQDs and CIS/ZnS QDs in an aqueous phase. This nanocomposite was characterized by photoluminescence, Raman, and ultraviolet-visible (UV-vis) spectroscopies, high-resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD). This fluorescent nanocomposite was developed as a highly sensitive, selective nonenzymatic cholesterol optical biosensor in 0.312-5 mM cholesterol. HRTEM micrographs confirmed the preparation of CIS/ZnS QDs and N-GQDs with average diameters of 3 and 5 nm, respectively. The as-prepared NG/CIS/ZnS QD nanocomposite had a high sensitivity for cholesterol with a wide linear range of concentration of 0.312-5 mM with an excellent correlation coefficient (R 2) of 0.9688 and limit of detection (LOD) of 0.222 mM.

Controlled synthesis of luminescent CIZS/ZnS/ZnS core/shell/shell nanoheterostructures

We report a systematic investigation of the influence of reaction temperatures and times on the morphologies and optical properties of resulting CIZS/ZnS/ZnS quantum nanoheterostructures with “giant” ZnS shell (size >10 nm).

Recent research on the luminous mechanism, synthetic strategies, and applications of CuInS2 quantum dots

We discuss the synthesis and luminescence mechanisms of CuInS₂ QDs, the strategies to improve their luminous performance and their potential application in light-emitting devices, solar energy conversion, and the biomedical field.

Design and fabrication of CuInS2/ZnS-based QLED for automotive lighting systems

This work reports the design, manufacturing and numerical simulation approach of a 6-pixel (4.5 mm2/pixel) electroluminescent quantum dot light emitting device (QLED) based on CuInS2/ZnS quantum dots as an active layer. The QLED device was fabricated using a conventional multi-layer thin film deposition. In addition, the electrical I-V curves were measured for each pixel independently, observing how the fabrication process and layer thickness have an influence in the shape of the plot. This experimental device, enabled us to create a computational model for the QLED based on the Transfer Hamiltonian approach to calculate the current density J (mA cm-2), the band diagram of the system, and the accumulated charge distribution. Besides, it is worth highlighting that the simulator allows the possibility to study the influence of different parameters of the QLED structure like the junction capacitance between the distinct multilayer set. Specifically, we found that the Anode-HIL interface capacitance has a greater influence in the I-V curve. This junction capacitance plays an important role in the current density increase and the QLED turn-on value when a forward voltage is applied to the device. The simulation enabled that influence could be controlled by the selection of the optimal thickness and transport layers during the experimental fabrication process. This work is remarkable since it achieves to fit simulation and experiment results in an accurate way for electroluminescent QLED devices; particularly the simulation of the device current, which is critical when designing the automotive electronics to control these new nanotechnology lighting devices in the future.

The Photoluminescence and Biocompatibility of CuInS2-Based Ternary Quantum Dots and Their Biological Applications

Semiconductor quantum dots (QDs) have become a unique class of materials with great potential for applications in biomedical and optoelectronic devices. However, conventional QDs contains toxic heavy metals such as Pb, Cd and Hg. Hence, it is imperative to find an alternative material with similar optical properties and low cytotoxicity. Among these materials, CuInS2 (CIS) QDs have attracted a lot of interest due to their direct band gap in the infrared region, large optical absorption coefficient and low toxic composition. These factors make them a good material for biomedical application. This review starts with the origin and photophysical characteristics of CIS QDs. This is followed by various synthetic strategies, including synthesis in organic and aqueous solvents, and the tuning of their optical properties. Lastly, their significance in various biological applications is presented with their prospects in clinical applications.

Green Synthesis of Sodium Alginate Capped -CuInS2 Quantum Dots with Improved Fluorescence Properties

CuInS₂ (CIS) quantum dots (QDs) are known to be ideal fluorophores based on their low toxicity and tunable emission. However, due to low quantum yield (QY) and photostability, the surface is usually passivated by a higher bandgap shell (e.g. ZnS). This always resulted in a blue-shifted emission position which is not usually favourable for biological imaging. To address this problem, we herein report the passivation of green synthesized near infra-red emitting glutathione (GSH) capped CuInS₂ QDs using different concentration of sodium alginate (SA) at different temperatures. The as-synthesized QDs are small (~ 3.2 nm), highly crystalline and emitted in the near infra-red region. The optical results showed a 36% increase in photostability and a 2-fold increase in quantum yield at ratio 1:8 (SA: CIS) which is suitable for prolonged biological imaging applications. Transmission electron microscope and X-ray diffraction (XRD) analyses showed that the materials are highly crystalline without any change in shape and size after passivation with the biopolymer. Graphical Abstract.

Sodium alginate passivated CuInS2/ZnS QDs encapsulated in the mesoporous channels of amine modified SBA 15 with excellent photostability and biocompatibility

We herein report the synthesis of CuInS₂/ZnS (CIS/ZnS) quantum dots (QDs) via a greener method followed by sodium alginate (SA) passivation and encapsulation into mesoporous channels of amine modified silica (SBA15-NH₂) for improved photostability and biocompatibility. The as-synthesized CIS/ZnS QDs exhibited near infrared emission even after SA passivation and silica encapsulation. Transmission electron microscopy (TEM) and Small angle X-ray diffraction (XRD) revealed the mesoporous nature of the SBA-15 remained stable after loading with the SA-CIS/ZnS QDs. The effective encapsulation of SA-CIS/ZnS QDs inside the pores of SBA15-NH₂ matrix was confirmed by Brunauer-Emmett-Teller (BET) pore volume analysis while the interaction between the QDs and SBA15-NH₂ was confirmed using Fourier transform infrared (FTIR) spectroscopy. The photostability of the QDs was greatly enhanced after these modifications. The resultant SA-CIS/ZnS-SBA15-NH₂ (QDs-silica) composite possessed remarkable biocompatibility towards lung cancer (A549) and kidney (HEK 293) cell lines making it a versatile material for theranostic applications.

Machado W, Wegner KD, Gontijo LAP, Bettini J, Schiavon MA, Reiss P, Aldakov D. Hydrothermal Synthesis of Aqueous-Soluble Copper Indium Sulfide Nanocrystals and Their Use in Quantum Dot Sensitized Solar Cells

A facile hydrothermal method to synthesize water-soluble copper indium sulfide (CIS) nanocrystals (NCs) at 150 °C is presented. The obtained samples exhibited three distinct photoluminescence peaks in the red, green and blue spectral regions, corresponding to three size fractions, which could be separated by means of size-selective precipitation. While the red and green emitting fractions consist of 4.5 and 2.5 nm CIS NCs, the blue fraction was identified as in situ formed carbon nanodots showing excitation wavelength dependent emission. When used as light absorbers in quantum dot sensitized solar cells, the individual green and red fractions yielded power conversion efficiencies of 2.9% and 2.6%, respectively. With the unfractionated samples, the efficiency values approaching 5% were obtained. This improvement was mainly due to a significantly enhanced photocurrent arising from complementary panchromatic absorption.

Flexible translucent chitosan-glycerin/QD nanocomposite glue for anti-counterfeiting films with strong adhesion and stability

With the rapid development of commodity circulation, more attention has been paid to the anticounterfeiting technology of commodities, including stability, universality and ease of distinguishing. The authors report the use of gelatin-chitosan-glycerin/QD nanocomposite-functionalized glue for luminescent anti-counterfeiting labels. As the blend and plasticizer, the addition of chitosan and glycerin effectively improved the flexibility and formability of the gelatin-chitosan-glycerin/QD composite films, which show excellent mechanical properties, including high transparency, luminescence and flexibility, and they are easy to prepare on a large scale, providing certain reference values for new anticounterfeiting technology applying a variety of morphologies.

CuZn2InTe4 quantum dots-a novel nanostructure employing a green synthesis route

We report the synthesis and characterisation of novel CuZn₂InTe₄ quantum dots (QDs) suitable for various optoelectronic applications. The nanostructures grown are technologically important due to their Cd and Pb-free composition. The synthesis was maintained “green” by using a phosphine free organometallic procedure utilizing octadecene as the coordinating solvent. The structural properties of the nanocrystals (NCs) were analyzed using high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and X-ray diffraction (XRD). The composition was verified using X-ray photoelectron spectroscopy (XPS), inductive coupled plasma-optical emission spectroscopy (ICP-OES) and energy dispersive X-ray spectroscopy (EDX). The optical studies were performed using UV-VIS-NIR spectroscopy and photoluminescence (PL) spectroscopy and the band gap value obtained was verified using cyclic voltammetry (CV). The nanostructures grown were spherical with a size of about 5 nm possessing appreciable monodispersity.

On the synthesis of novel Cd and Pb free quaternary QDs using green synthesis.

Cu–Cd–Zn–S/ZnS core/shell quantum dot/polyvinyl alcohol flexible films for white light-emitting diodes

We present a facile route for the synthesis of water-soluble Cu–Cd–Zn–S/ZnS core/shell quantum dots (QDs) by simple pH regulation. The PL spectra of Cu–Cd–Zn–S/ZnS core/shell quantum dots can cover the whole visible light region in the case of only two ratios of Cu/Cd/Zn. The emission wavelength of Cu–Cd–Zn–S/ZnS QDs can be conveniently tuned from 474 to 515 and 548 to 629 nm by adjusting the pH value when the ratios of Cu/Cd/Zn are fixed at 1 : 5 : 80 and 1 : 5 : 10, respectively. It is worth noting that under the condition of a constant Cu/Cd/Zn ratio, the UV-vis absorption spectra do not change with the fluorescence spectra, indicating that the band gap of QDs remains unchanged during the change of pH value. The photoluminescence (PL) quantum yield of the as-prepared QDs with yellow emission is up to 76%. The QDs also show excellent chemical stability after the deposition of the ZnS shell. Luminescent and flexible films are fabricated by combining Cu–Cd–Zn–S QDs with polyvinyl alcohol (PVA). The QD/PVA flexible hybrid films are successfully applied on top of a conventional blue InGaN chip for remote-type warm-white LEDs. As-fabricated warm-white LEDs exhibit a higher color rendering index (CRI) of about 89.2 and a correlated color temperature (CCT) of 4308 K.

We present a facile route for the synthesis of water-soluble Cu–Cd–Zn–S/ZnS core/shell quantum dots (QDs) by simple pH regulation.

Promising Mercaptobenzoic Acid-Bridged Charge Transfer for Electrochemiluminescence from CuInS2@ZnS Nanocrystals via Internal Cu+/Cu2+ Couple Cycling

Screening novel electrochemiluminescence (ECL) systems with less inherent interference is strongly anticipated for ECL evolution. Herein, near-infrared ECL (∼730 nm) with an ultralow triggering potential of 0.45 V (vs Ag/AgCl) is achieved under physiological conditions with 4-mercaptobenzoic acid (MBA) and citrate capped CuInS₂@ZnS (CIS@ZnS) nanocrystals (NCs), which is promising for less autofluorescence and electrochemical interference. Cu⁺ species within the CIS@ZnS NCs can be electrochemically oxidized at 0.45 V to form internal Cu²⁺ defects, while the capping agent MBA can bridge a direct charge transfer between the oxidized NCs and the traditional coreactant tripropylamine (TPrA) for weak ECL at 0.45 V. When hydrazine hydrate is adopted as coreactant, CIS@ZnS NCs/hydrazine hydrate exhibits 8k-fold enhanced oxidative-reduction ECL via the internal Cu⁺/Cu²⁺ couple cycling at 0.45 V in comparison to CIS@ZnS NCs/TPrA. This work opens a way to enhance the radiative charge transfer of NCs.

Facile, large scale synthesis of water soluble AgInSe2/ZnSe quantum dots and its cell viability assessment on different cell lines

I-III-VI chalcopyrite ternary quantum dots have emerged as a good alternative over the conventional II-VI and IV-VI chalcogenide binary QDs that usually consist of heavy metals such as Cd and Pb which has limited their bioapplications. Among the chalcopyrite QDs, AgInSe₂ QDs has been the least developed due to the imbalanced cation reactivity, unwanted impurities, broad size distribution and resultant large particle sizes. In addition, the cell viability of these QDs still needs to be investigated on different cell lines both normal and cancerous ones. Herein, large-scale synthesis of water-soluble thioglycolic acid (TGA) capped and gelatin-stabilized AgInSe₂ (AISe) core and AgInSe₂/ZnSe (AISe/ZnSe) core/shell QDs in the absence of an inert atmosphere and their cell viability against different cell lines are reported. The optical and structural characteristics of the as-synthesized QDs were investigated by UV-visible (vis) absorption, photoluminescence (PL) and Fourier-transmission infrared (FTIR) spectroscopies, dynamic light scattering (DLS), X-ray diffraction (XRD), and high-resolution transmission electron microscope (HRTEM) techniques. Growth of ZnSe shell on the core AISe resulted in the blue shifting of the emission maximum position with the increased PL intensity. The QDs are small and spherical in shape with an average particle diameter of 2.8 nm and 3.2 nm for AISe and AISe/ZnSe QDs respectively. The in vitro cell viability assay revealed that the as-synthesized AISe/ZnSe QDs are not toxic towards cancerous (HeLa -cervical cancer and A549-lung cancer) and normal (BHK21 -Kidney) cell lines.

Semiconductor nanocrystal-polymer hybrid nanomaterials and their application in molecular imprinting

Quantum dots (QDs) are attractive semiconductor fluorescent nanomaterials with remarkable optical and electrical properties. The broad absorption spectra and high stability of QD transducers are advantageous for sensing and bioimaging. Molecular imprinting is a technique for manufacturing synthetic polymeric materials with a high recognition ability towards a target analyte. The high selectivity of the molecularly imprinted polymers (MIPs) is a result of the fabrication process based on the template-tailored polymerization of functional monomers. The three-dimensional cavities formed in the polymer network can serve as the recognition elements of sensors because of their specificity and stability. Appending specific molecularly imprinted layers to QDs is a promising strategy to enhance the stability, sensitivity, and selective fluorescence response of the resulting sensors. By merging the benefits of MIPs and QDs, inventive optical sensors are constructed. In this review, the recent synthetic strategies used for the fabrication of QD nanocrystals emphasizing various approaches to effective functionalization in aqueous environments are discussed followed by a detailed presentation of current advances in QD conjugated MIPs (MIP-QDs). Frontiers in manufacturing of specific imprinted layers of these nanomaterials are presented and factors affecting the specific behaviour of an MIP shell are identified. Finally, current limitations of MIP-QDs are defined and prospects are outlined to amplify the capability of MIP-QDs in future sensing.

Biocompatible off-stoichiometric copper indium sulfide quantum dots with tunable near-infrared emission via aqueous based synthesis

Off-stoichiometry effects on the near-infrared emission of the aqueous based biocompatible copper indium sulfide quantum dots are revealed.

A heavy metal-free CuInS2 quantum dot sensitized NiO photocathode with a Re molecular catalyst for photoelectrochemical CO2 reduction

Heavy metal-free CuInS₂ QDs as a photosensitizer and a Re molecular catalyst have been successfully employed to co-sensitize a NiO photocathode for CO₂ reduction into CO.

A glassware-free combinatorial synthesis of green quantum dots using bubble wrap

Here, we describe the use of commercially-available bubble wrap as the basis for the simple, cheap combinatorial exploration of the synthesis of brightly emitting core/shell quantum dots.

In this communication, we highlight the use of bubble wrap in the simple parallel synthesis of CuInS₂-based quantum dots with different optical properties, based on varying precursors concentrations.

Luminescent, low-toxic and stable gradient-alloyed Fe:ZnSe(S)@ZnSe(S) core:shell quantum dots as a sensitive fluorescent sensor for lead ions

In this paper, an aqueous-based approach is introduced for facile, fast, and green synthesis of gradient-alloyed Fe-doped ZnSe(S)@ZnSe(S) core:shell quantum dots (QDs) with intense and stable emission. Co-utilization of co-nucleation and growth doping strategies, along with systematic optimization of emission intensity, provide a well-controllable/general method to achieve internally doped QDs (d-dots) with intense emission. Results indicate that the alloyed ZnSe(S)@ZnSe(S) core:shell QDs have a gradient structure that consists of a Se-rich core and a S-rich shell. This gradient structure cannot only passivate the core d-dots by means of the wider band gap S-rich shell, but also minimizes the lattice mismatch between alloyed core-shell structures. Using this novel strategy and utilizing the wider band gap S-rich shell can obviously increase the cyan emission intensity and also drastically improve the emission stability against chemical and optical corrosion. Furthermore, the cytotoxicity experiments indicate that the obtained d-dots are nontoxic nanomaterials, and thus they can be considered as a promising alternative to conventional Cd-based QDs for fluorescent probes in biological fields. Finally, it is demonstrated that the present low-toxicity and gradient-alloyed core:shell d-dots can be used as sensitive chemical detectors for Pb²⁺ ions with excellent selectivity, small detection limit, and rapid response time.

Colloidal Phase-Change Materials: Synthesis of Monodisperse GeTe Nanoparticles and Quantification of Their Size-Dependent Crystallization

Phase-change memory materials refer to a class of materials that can exist in amorphous and crystalline phases with distinctly different electrical or optical properties, as well as exhibit outstanding crystallization kinetics and optimal phase transition temperatures. This paper focuses on the potential of colloids as phase-change memory materials. We report a novel synthesis for amorphous GeTe nanoparticles based on an amide-promoted approach that enables accurate size control of GeTe nanoparticles between 4 and 9 nm, narrow size distributions down to 9-10%, and synthesis upscaling to reach multigram chemical yields per batch. We then quantify the crystallization phase transition for GeTe nanoparticles, employing high-temperature X-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. We show that GeTe nanoparticles crystallize at higher temperatures than the bulk GeTe material and that crystallization temperature increases with decreasing size. We can explain this size-dependence using the entropy of crystallization model and classical nucleation theory. The size-dependences quantified here highlight possible benefits of nanoparticles for phase-change memory applications.

Promising Anodic Electrochemiluminescence of Nontoxic Core/Shell CuInS2/ZnS Nanocrystals in Aqueous Medium and Its Biosensing Potential

Copper indium sulfide (CuInS₂, CIS) nanocrystals (NCs) are a promising solution to the toxic issue of Cd- and Pb-based NCs. Herein, electrochemiluminescence (ECL) of CIS NCs in aqueous medium is investigated for the first time with l-glutathione and sodium citrate-stabilized water-soluble CIS/ZnS NCs as model. The CIS/ZnS NCs can be oxidized to hole-injected states via electrochemically injecting holes into valence band at 0.55 and 0.94 V (vs Ag/AgCl), respectively. The hole-injected state around 0.94 V can bring out efficient oxidative-reduction ECL with a similar color to Ru(bpy)₃²⁺ in the presence of tri- n-propylamine (TPrA) and enable CIS/ZnS NCs promising ECL tags with l-glutathione as linker for labeling. The ECL of CIS/ZnS NCs/TPrA can be utilized to determine vascular endothelial growth factor (VEGF) from 0.10 to 1000 pM with the limit of detection at 0.050 pM (S/N = 3). Although the hole-injected state around 0.55 V is generated ahead of oxidation of TPrA and fails to bring out coreactant ECL, annihilation ECL proves that both hole-injected states generated, at 0.55 and 0.94 V, can be involved in electrochemical redox-induced radiative charge transfer by directly stepping CIS/ZnS NCs from electron-injecting potential to hole-injecting potential. CIS/ZnS NCs are promising nontoxic electrochemiluminophores with lowered ECL triggering potential around 0.55 V for less electrochemical interference upon the development of coreactant.

Nonstoichiometric Cux Iny S Quantum Dots for Efficient Photocatalytic Hydrogen Evolution

Unlike their bulk counterpart, Cu_x In_y S quantum dots (QDs) prepared by an aqueous synthetic approach, show promising activity for photocatalytic hydrogen evolution, which is competitive with the state-of-the-art Cd chalcogen QDs. Moreover, the as-prepared Cu_x In_y S QDs with In-rich composition show much better efficiency than the stoichiometric ones (Cu/In=1:1).

Enzymatic biomineralization of biocompatible CuInS2, (CuInZn)S2 and CuInS2/ZnS core/shell nanocrystals for bioimaging

This work demonstrates a bioenabled fully aqueous phase and room temperature route to the synthesis of CuInS₂/ZnS core/shell quantum confined nanocrystals conjugated to IgG antibodies and used for fluorescent tagging of THP-1 leukemia cells. This elegant, straightforward and green approach avoids the use of solvents, high temperatures and the necessity to phase transfer the nanocrystals prior to application. Non-toxic CuInS₂, (CuInZn)S₂, and CuInS₂/ZnS core/shell quantum confined nanocrystals are synthesized via a biomineralization process based on a single recombinant cystathionine γ-lyase (CSE) enzyme. First, soluble In-S complexes are formed from indium acetate and H₂S generated by CSE, which are then stabilized by l-cysteine in solution. The subsequent addition of copper, or both copper and zinc, precursors then results in the immediate formation of CuInS₂ or (CuInZn)S₂ quantum dots. Shell growth is realized through subsequent introduction of Zn acetate to the preformed core nanocrystals. The size and optical properties of the nanocrystals are tuned by adjusting the indium precursor concentration and initial incubation period. CuInS₂/ZnS core/shell particles are conjugated to IgG antibodies using EDC/NHS cross-linkers and then applied in the bioimaging of THP-1 cells. Cytotoxicity tests confirm that CuInS₂/ZnS core/shell quantum dots do not cause cell death during bioimaging. Thus, this biomineralization enabled approach provides a facile, low temperature route for the fully aqueous synthesis of non-toxic CuInS₂/ZnS quantum dots, which are ideal for use in bioimaging applications.

Shining a light on transition metal chalcogenides for sustainable photovoltaics

Transition metal chalcogenides are an important family of materials that have received significant interest in recent years as they have the potential for diverse applications ranging from use in electronics to industrial lubricants. One of their most exciting properties is the ability to generate electricity from incident light. In this perspective we will summarise and highlight the key results and challenges in this area and explain how transition metal chalcogenides are a good choice for future sustainable photovoltaics.