π-Conjugated trinuclear group-9 metalladithiolenes with a triphenylene backbone

Electronically-coupled redox centers in trimetallic cobalt complexes

Synthesis and isolation of molecular building blocks of metal-organic frameworks (MOFs) can provide unique opportunities for characterization that would otherwise be inaccessible due to the heterogeneous nature of MOFs. Herein, we report a series of trinuclear cobalt complexes incorporating dithiolene ligands, triphenylene-2,3,6,7,10,11-hexathiolate (THT) (13+), and benzene hexathiolate (BHT) (23+), with 1,1,1,-tris(diphenylphosphinomethyl)ethane (triphos) employed as the capping ligand. Single crystal X-ray analyses of 13+ and 23+ display three five-coordinate cobalt centers bound to the triphos and dithiolene ligands in a distorted square pyramidal geometry. Cyclic voltammetry studies of 13+ and 23+ reveal three redox features associated with the formation of mixed valence states due to the sequential reduction of the redox-active metal centers (Co^III/II). Using this electrochemical data, the comproportionality values were determined for 1 and 2 (log K_c = 1.4 and 1.5 for 1, and 4.7 and 5.8 for 2), suggesting strong resonance-stabilized coupling of the metal centers, with stronger electronic coupling observed for complex 2 compared to that for complex 1. Cyclic voltammetry studies were also performed in solvents of varying polarity, whereupon the difference in the standard potentials (ΔE_1/2) for 1 and 2 was found to shift as a function of the polarity of the solvent, indicating a negative correlation between the dielectric constant of the electrochemical medium and the stability of the mixed valence species. Spectroelectrochemical studies of in situ generated multi-valent (MV) states of complexes 1 and 2 display characteristic NIR intervalence charge transfer (IVCT) bands, and analysis of the IVCT transitions for complex 2 suggests a weakly coupled class II multi-valent species and relatively large electronic coupling factors (1700 cm^-1 for the first multi-valent state of 22+, and 1400 and 4000 cm^-1 for the second multi-valent state of 2+). Density functional theory (DFT) calculations indicate a significant deviation in relative energies of the frontier orbitals of complexes 13+, 23+, and 3+ that contrasts those calculated for the analogous trinuclear cobalt dithiolene complexes employing pentamethylcyclopentadienyl (Cp*) as the capping ligand (Co3Cp*3THT and Co3Cp*3BHT, respectively), and may be a result of the cationic nature of complexes 13+, 23+, and 3+.

Redox Ladder of Ni3 Complexes with Closed-Shell, Mono-, and Diradical Triphenylene Units: Molecular Models for Conductive 2D MOFs

We report the isolation and characterization of a series of trinickel complexes with 2,3,6,7,10,11-hexaoxytriphenylene (HOTP), [(Me₃ TPANi)₃ (HOTP)](BF₄ )_n (Me₃ TPA=N,N,N-tris[(6-methyl-2-pyridyl)methyl]amine) (n=2, 3, 4 for complexes 1, 2, 3). These complexes comprise a redox ladder whereby the HOTP core displays increasingly quinoidal character as its formal oxidation state changes from -4, to -3, and -2 in 1, 2, and 3, respectively. No formal oxidation state changes occur on Ni, allowing the isolation of singlet diradical, monoradical, and closed-shell configurations for HOTP in 1, 2, and 3, respectively, with a concomitant decrease in the spin coupling strength upon oxidation. Because the three complexes can be considered models of the smallest building blocks of 2D conductive metal-organic frameworks such as Ni₉ HOTP₄ , these results serve as possible inspiration for the construction of extended materials with targeted electric and magnetic properties.

Recent progress on pristine two-dimensional metal-organic frameworks as active components in supercapacitors

Two-dimensional (2D) metal-organic frameworks (MOFs) are a new generation of 2D materials that can provide uniform active sites and unique open channels as well as excellent catalytic abilities, interesting magnetic properties, and reasonable electrical conductivities. Thus, these MOFs are uniquely qualified for use in applications in energy-related fields or portable devices because they possess fast charge and discharge ability, high power density, and ultralong cycle life factors. There has been worldwide research interest in 2D conducting MOFs, and numerous techniques and strategies have been developed to synthesize these MOFs and their derivatives. Thus, this is the opportune time to review recent research progress on the development of 2D MOFs as electrodes in supercapacitors. This review covers synthetic design strategies, electrochemical performances, and working mechanisms. We will divide these 2D MOFs into two types on the basis of their conductive aspects: 2D conductive MOFs and 2D layered MOFs (including pillar-layered MOFs and 2D nanosheets). The challenges and perspectives of 2D MOFs are also provided.

Two-Dimensional Bis(dithiolene)iron(II) Self-Powered UV Photodetectors with Ultrahigh Air Stability

Organometallic two-dimensional (2D) nanosheets with tailorable components have recently fascinated the optoelectronic communities due to their solution-processable nature. However, the poor stability of organic molecules may hinder their practical application in photovoltaic devices. Instead of conventional organometallic 2D nanosheets with low weatherability, an air-stable π-conjugated 2D bis(dithiolene)iron(II) (FeBHT) coordination nanosheet (CONASH) is synthesized via bottom-up liquid/liquid interfacial polymerization using benzenehexathiol (BHT) and iron(II) ammonium sulfate [Fe(NH4)2(SO4)2] as precursors. The uncoordinated thiol groups in FeBHT are easily oxidized, but the Fe(NH4)2(SO4)2 dissociation rate is slow, which facilitates the protection of sulfur groups by iron(II) ions. The density functional theory calculates that the resultant FeBHT network gains the oxygen-repelling function for oxidation suppression. In air, the FeBHT CONASH exhibits self-powered photoresponses with short response times (<40 ms) and a spectral responsivity of 6.57 mA W-1, a specific detectivity of 3.13 × 1011 Jones and an external quantum efficiency of 2.23% under 365 nm illumination. Interestingly, the FeBHT self-powered photodetector reveals extremely high long-term air stability, maintaining over 94% of its initial photocurrent after aging for 60 days without encapsulation. These results open the prospect of using organometallic 2D materials in commercialized optoelectronic fields.

Metal–organic frameworks with different spatial dimensions for supercapacitors

Recent progress in MOF materials for SCs with different spatial dimensions, such as 2D MOFs, including conductive MOFs and nanosheets, and 3D MOFs, categorized as single metallic and multiple metallic MOFs, are reviewed.

Ultrafast Energy Transfer in Dinuclear Complexes with Bridging 1,10-Phenanthroline-5,6-Dithiolate

We report herein the preparation and characterization of dinuclear complexes with the bridging ligand 1,10-phenanthroline-5,6-dithiolate (phendt^2-) bearing Ru(bpy)₂ or Ir(ppy)₂ at the diimine moiety and Ni(dppe), Ni(dppf), CoCp, RhCp*, and Ru( p-Me-ⁱPr-benzene) at the dithiolate unit. In comparison with the mononuclear precursors used in the synthesis, all dinuclear complexes were characterized by absorption and photoluminescence spectroscopy as well as cyclic voltammetry. Because of the beneficial spectral and electrochemical properties of the Ir/Co complex for a light-driven charge separation, this complex was investigated in detail by time-resolved luminescence {nanosecond (ns)-resolution} and transient absorption spectroscopy {femtosecond (fs)-resolution}. All measurements supported by DFT calculations show that the observed effective luminescence quenching by the dithiolate coordinated metal is caused by an ultrafast singlet-singlet Dexter energy transfer.

Synthesis of a Thiol Building Block for the Crystallization of a Semiconducting Gyroidal Metal-sulfur Framework

We present a method for preparing thioester molecules as the masked form of the thiol linkers and their utilization for accessing a semiconducting and porous metal-dithiolene network in the highly ordered single crystalline state. Unlike the highly reactive free-standing thiols, which tend to decompose and complicate the crystallization of metal-thiolate open frameworks, the thioester reacts in situ to provide the thiol species, serving to mitigate the reaction between the mercaptan units and the metal centers, and to improve crystallization consequently. Specifically, the thioester was synthesized in a one-pot procedure: an aromatic bromide (hexabromotriphenylene) reacted with excess sodium thiomethoxide under vigorous conditions to first form the thioether intermediate product. The thioether was then demethylated by the excess thiomethoxide to provide the thiolate anion that was acylated to form the thioester product. The thioester was conveniently purified by standard column chromatography, and then used directly in the framework synthesis, wherein NaOH and ethylenediamine serve to revert in situ the thioester to the thiol linker for assembling the single-crystalline Pb(II)-dithiolene network. Compared with other methods for thiol synthesis (e.g., by cleaving alkyl thioether using sodium metal and liquid ammonia), the thioester synthesis here uses simple conditions and economical reagents. Moreover, the thioester product is stable and can be conveniently handled and stored. More importantly, in contrast to the generic difficulty in accessing crystalline metal-thiolate open frameworks, we demonstrate that using the thioester for in situ formation of the thiol linker greatly improves the crystallinity of the solid-state product. We intend to encourage broader research efforts on the technologically important metal-sulfur frameworks by disclosing the synthetic protocol for the thioester as well as the crystalline framework solid.

Graphene-like metal–organic frameworks: morphology control, optimization of thin film electrical conductivity and fast sensing applications

Platelets of the Cu₃hhtp₂-MOF are used for coatings and sensing.

Synthetic Two-Dimensional Materials: A New Paradigm of Membranes for Ultimate Separation

Microporous membranes act as selective barriers and play an important role in industrial gas separation and water purification. The permeability of such membranes is inversely proportional to their thickness. Synthetic two-dimensional materials (2DMs), with a thickness of one to a few atoms or monomer units are ideal candidates for developing separation membranes. Here, groundbreaking advances in the design, synthesis, processing, and application of 2DMs for gas and ion separations, as well as water desalination are presented. This report describes the syntheses, structures, and mechanical properties of 2DMs. The established methods for processing 2DMs into selective permeation membranes are also discussed and the separation mechanism and their performances addressed. Current challenges and emerging research directions, which need to be addressed for developing next-generation separation membranes, are summarized.

Coordination Programming of Two-Dimensional Metal Complex Frameworks

Since the discovery of graphene, two-dimensional materials with atomic thickness have attracted much attention because of their characteristic physical and chemical properties. Recently, coordination nanosheets (CONASHs) came into the world as new series of two-dimensional frameworks, which can show various functions based on metal complexes formed by numerous combinations of metal ions and ligands. This Feature Article provides an overview of recent progress in synthesizing CONASHs and in elucidating their intriguing electrical, sensing, and catalytic properties. We also review recent theoretical studies on the prediction of the unique electronic structures, magnetism, and catalytic ability of materials based on CONASHs. Future prospects for applying CONASHs to novel applications are also discussed.

Copper-incorporated mono- and di-TeRu5 metal carbonyl complexes: syntheses, structures, and an unusual skeletal arrangement

Two sandwich-type Cu3Cl- or Cu2{Te2Ru4(CO)10}-bridging di-TeRu5 clusters, [{TeRu5(CO)14}2Cu3Cl](2-) () and [{TeRu5(CO)14}2Cu2{Te2Ru4(CO)10}](4-) (), were obtained from the reaction of [TeRu5(CO)14](2-) with 1 equiv. of [Cu(MeCN)4][BF4] in CH2Cl2 or THF at 0 °C, respectively, depending on the solvents. The chloride-abstracted was structurally characterized to have two TeRu5 cores that were linked by a Cu3Cl moiety with two Cu-Cu bonds. If the reaction was carried out in a molar ratio of 1 : 2 at 0 or 30 °C in CH2Cl2, the structural isomers [TeRu5(μ-CO)2(CO)12(CuMeCN)2] () and [TeRu5(μ-CO)3(CO)11Cu2(MeCN)2] () were produced, respectively, as the major product. Cluster displayed a TeRu5 core with two adjacent Ru3 triangles each capped by a μ3-Cu(MeCN) fragment, while contained a TeRu5 core with one triangle Ru3 plane capped by a Cu2(MeCN)2 fragment with two Cu atoms covalently bonded. Upon heating, the isomerization of into proceeded to undergo an unusual skeletal arrangement of Cu(MeCN) and migration of CO, with the TeRu5 core remaining intact. An electrochemical study revealed that and each exhibited only one oxidation while cluster had two consecutive oxidations, suggesting significant electronic communication between the two TeRu5 metal cores in via the Cu3 moiety. This work describes the facile synthesis of a series of semiconducting Cux-bridging Te-Ru carbonyl clusters, in which the incorporation of the Cux fragments has significantly influenced their resulting structures, rearrangements, and electronic properties, which was further elucidated by DFT calculations.