Counteranion and Solvent Assistance in Ruthenium-Mediated Alkyne to Vinylidene Isomerizations

Impact of counteranions on N-heterocyclic carbene gold(i)-catalyzed cyclization of propargylic amide

N-Heterocyclic carbene (NHC) Au(i)-catalyzed organic synthesis has recently been receiving increasing attention, especially with the activation of alkynes. In contrast, counteranions, being widely problematic in Au(i)-catalyzed transformations, are commonly considered as innocent partners and are not respectably included in a computational model. Herein, we report density functional theory (DFT) investigations of the Au(i)-catalyzed cyclization of propargylic amides to exploit the mechanistic effect of several counteranions to shed some light for further future developments. Among the counteranions used in this study, NTf₂ ^-, ClO₄ ^-, TsO^-, TFA^-, TfO^-, MsO^-, and SbF₆ ^-, both the cyclization and protodeauration step favor the 5-exo-dig product over the 6-endo-dig product when the alkyne moiety is terminated with hydrogen. These anions reveal a crucial influence on the energy profile through lowering the barriers of the reaction. Mechanistically, the results obtained from all counteranions show that the protodeauration is slower than the cyclization. By using an energetic span model, the results clearly indicate that the rate-determining state is the protodeauration step for all counteranions, and thus protodeauration is the turnover-limiting step. The turnover frequency (TOF) results for the formation of the 5-exo-dig product show cyclization reactivity in the order of MsO^- > TFA^- > ClO₄ ^- > NTf₂ ^- > TfO^- > TsO^- ≫ SbF₆ ^-, whereas an order of TFA^- > MsO^- > NTf₂ ^- > TfO^- ≈ ClO₄ ^- > SbF₆ ^- ⋙ TsO^- is calculated for the protodeauration, suggesting that SbF₆ ^- and TsO^- are disfavored due to their slow protodeauration. In this regard, and for the 6-endo-dig pathway, our conclusions demonstrate an order of TfO^- > TFA^- > MsO^- > NTf₂ ^- > ClO₄ ^- > TsO^- ⋙ SbF₆ ^- for the cyclization and TFA^- > TsO^- > MsO^- > TfO^- > NTf₂ ^- > ClO₄ ^- ⋙ SbF₆ ^- for the protodeauration, advocating that the anions SbF₆ ^-, NTf₂ ^- and ClO₄ ^- are unlikely partners for the 6-endo-dig pathway because of their slow protodeauration. Finally, the findings here advise that any engineering of the counteranion to increase the efficiency of catalytic system would be more effective on the protodeauration step rather than the cyclization step.

Chemoselective Ru-Catalyzed Oxidative Lactamization vs Hydroamination of Alkynylamines: Insights from Experimental and Density Functional Theory Studies

The Ru-catalyzed intramolecular oxidative amidation (lactamization) of aromatic alkynylamines with 4-picoline N-oxide as an external oxidant has been developed. This chemoselective process is very efficient to achieve medium-sized ε- and ζ-lactams (seven- and eight-membered rings) but not for the formation of common δ-lactams (six-membered rings). DFT studies unveiled the capital role of the chain length between the amine and the alkyne functionalities: the longer the connector, the more favored the lactamization process vs hydroamination.

Mechanistic Versatility at Ir(PSiP) Pincer Catalysts: Triflate Proton Shuttling from 2-Butyne to Diene and [3]Dendralene Motifs

The five-coordinate hydrido complex [IrH(OTf)(PSiP)] (1) catalytically transforms 2-butyne into a mixture of its isomer 1,3-butadiene, and [3]dendralene and linear hexatriene dimerization products: (E)-4-methyl-3-methylene-1,4-hexadiene and (3Z)-3,4-dimethyl-1,3,5-hexatriene, respectively. Under the conditions of the catalytic reaction, benzene, and 363 K, the hexatriene further undergoes thermal electrocyclization into 2,3-dimethyl-1,3-cyclohexadiene. The reactions between 1 and the alkyne substrate allow isolation or nuclear magnetic resonance (NMR) observation of catalyst resting states and possible reaction intermediates, including complexes with the former PSiP pincer ligands disassembled into PSi and PC chelates, and species coordinating allyl or carbene fragments en route to products. The density functional theory (DFT) calculations guided by these experimental observations disclose competing mechanisms for C–H bond elaboration that move H atoms either classically, as hydrides, or as protons transported by the triflate. This latter role of triflate, previously recognized only for more basic anions such as carboxylates, is discussed to result from combining the unfavorable charge separation in the nonpolar solvent and the low electronic demand from the metal to the anion at coordination positions trans to silicon. Triflate deprotonation of methyl groups is key to release highly coordinating diene products from stable allyl intermediates, thus enabling catalytic cycling.

A mechanistic study on the gold(i)-catalyzed cyclization of propargylic amide: revealing the impact of expanded-ring N-heterocyclic carbenes

Density functional theory (DFT) was applied to understand the mechanistic pathway of the gold(i)-catalyzed cyclization of propargylic amide, and to reveal the impact of expanded-ring N-heterocyclic carbenes.

Beyond Continuum Solvent Models in Computational Homogeneous Catalysis

In homogeneous catalysis solvent is an inherent part of the catalytic system. As such, it must be considered in the computational modeling. The most common approach to include solvent effects in quantum mechanical calculations is by means of continuum solvent models. When they are properly used, average solvent effects are efficiently captured, mainly those related with solvent polarity. However, neglecting atomistic description of solvent molecules has its limitations, and continuum solvent models all alone cannot be applied to whatever situation. In many cases, inclusion of explicit solvent molecules in the quantum mechanical description of the system is mandatory. The purpose of this article is to highlight through selected examples what are the reasons that urge to go beyond the continuum models to the employment of micro-solvated (cluster-continuum) of fully explicit solvent models, in this way setting the limits of continuum solvent models in computational homogeneous catalysis. These examples showcase that inclusion of solvent molecules in the calculation not only can improve the description of already known mechanisms but can yield new mechanistic views of a reaction. With the aim of systematizing the use of explicit solvent models, after discussing the success and limitations of continuum solvent models, issues related with solvent coordination and solvent dynamics, solvent effects in reactions involving small, charged species, as well as reactions in protic solvents and the role of solvent as reagent itself are successively considered.

DFT calculations bring insight to internal alkyne-to-vinylidene transformations at rhodium PNP- and PONOP-pincer complexes

Through DFT calculations, the equilibrium between Rh–alkyne and Rh–vinylidene species of PXNXP pincer ligated Rh cationic complexes is shown to be tuned by the P–Rh–P bite angle, which in turn is dictated by the nature of the X moiety of the pincer ligand.

1,2,3-Triazolium-Derived Mesoionic Carbene Ligands Bearing Chiral Sulfur-Based Moieties: Synthesis, Catalytic Properties, and Their Role in Chirality Transfer

1,2,3-Triazole-derived mesoionic carbenes (MICs) having a chiral sulfur functional group at the C5 position are easily available through a CuAAC between chiral alkynyl sulfoxides and different azides. The MICs form complexes with several metals (Au, Ag, Ir, Rh, and Ru) that are enantiomerically pure. Moreover, enantiomerically pure MIC sulfinilimines are obtained from the corresponding sulfoxide retaining the chirality. Through this article, the participation of sulfoxide moieties in different catalytic and chirality transfer processes, as well as in discovering mechanistically new processes will be shown. The role of the sulfur chiral moiety in catalytic cycloisomerization and cycloisomerization-dimerization processes using Au-MIC catalysts is dual. The sulfur functional group either stabilizes intermediates in the catalytic cycle, allowing for the reaction to occur or significantly increases the selectivity of the cyclization processes. 1,2,3-Triazole MICs having chiral sulfoxides at C5 are extremely efficient in preparing chiral at the metal complexes by C-H insertion processes. The chiral at the metal half-sandwich complexes, having the enantiopure sulfur chiral group unaltered, experiences different reactions with complete retention of the configuration. Finally, mechanistically new processes, like the desulfinilation of 1,2,3-triazolium salts in Ag-MIC complexes have been uncovered. These still-nascent classes of compounds will offer opportunities for the discovery of novel catalytic applications and to study new mechanistically sound processes.

Copper-Catalyzed Regioselective Synthesis of (E)-β-Fluorovinyl Sulfones

Organofluorine compounds are finding increasing application in a variety of fields such as pharmaceutical, agrochemical, and material sciences. However, given the scarcity of fluorine-containing natural products, advancement in this area depends almost entirely on the development of new synthetic methodologies. In this article, we present the synthesis of a series of previously undescribed (E)-β-fluorovinyl sulfones via a simple copper-catalyzed addition of hydrogen fluoride to alkynyl sulfone starting materials in varying yields and E/Z selectivities. The hydrogenation of these products was also explored and compared with the hydrogenation of the related Z isomers. These new products may find interesting applications, given the versatility of vinyl sulfones in chemical synthesis and the unique properties of vinyl fluorides in biological settings.

One catalyst, multiple processes: ligand effects on chemoselective control in Ru-catalyzed anti-Markovnikov reductive hydration of terminal alkynes

The ligand effect through kinetic and thermodynamic control on the chemoselectivity of one-catalyst multi-step catalysis.

Hydrogen and Dihydrogen Bonds in the Reactions of Metal Hydrides

The dihydrogen bond-an interaction between a transition-metal or main-group hydride (M-H) and a protic hydrogen moiety (H-X)-is arguably the most intriguing type of hydrogen bond. It was discovered in the mid-1990s and has been intensively explored since then. Herein, we collate up-to-date experimental and computational studies of the structural, energetic, and spectroscopic parameters and natures of dihydrogen-bonded complexes of the form M-H···H-X, as such species are now known for a wide variety of hydrido compounds. Being a weak interaction, dihydrogen bonding entails the lengthening of the participating bonds as well as their polarization (repolarization) as a result of electron density redistribution. Thus, the formation of a dihydrogen bond allows for the activation of both the MH and XH bonds in one step, facilitating proton transfer and preparing these bonds for further transformations. The implications of dihydrogen bonding in different stoichiometric and catalytic reactions, such as hydrogen exchange, alcoholysis and aminolysis, hydrogen evolution, hydrogenation, and dehydrogenation, are discussed.

Rapid Markovnikov addition of HCl to a pendant alkyne: evidence for a quinoidal cumulene

The reaction of the vinylidene cations trans-[Ru(CCH–C₆H₂-2,5-R₂-4-CCH)Cl(dppm)₂]⁺ (R = H, Me) with chloride results in Markovnikov addition of HCl to the terminal alkyne, suggesting the intermediacy of a quinoidal cumulene complex.