Tuning the Electronic and Steric Parameters of a Redox-Active Tris(amido) Ligand

Elucidating the Impact of Rare Earth or Transition Metal Identity on the Physical and Electronic Structural Properties of a Series of Redox-Active Tris(amido) Complexes

The use of redox-active ligands with the f-block elements has been employed to promote unique chemical transformations and explore their unique emergent electronic properties for a myriad of applications. In this study, we report eight new tris(amido) metal complexes: 1-Ln (Ln = Tb3+, Dy3+, Ho3+, Er3+, Tm3+, and Yb3+), 1-La, and 1-Ti (an early transition metal analogue). The one-electron oxidation of the tris(amido) ligand was conducted to generate semi-iminato complexes 2-Ln, 2-La, and 2-Ti, and these complexes were studied using EPR. Tris(amido) complexes 1-Ln, 1-La, and 1-Ti were fully characterized using a range of spectroscopic (NMR and UV-vis/NIR) and physical techniques (X-ray diffraction and cyclic voltammetry, with the exception of 1-La). Computational methods were employed to further elucidate the electronic structures of these complexes. Lastly, complexes 1-Ln, 1-La, and 1-Ti were probed as catalysts for alkyl-alkyl cross-coupling, and the initial rate of the reaction was measured to explore the influence of the metal ion.

Modulation of the Bonding between Copper and a Redox-Active Ligand by Hydrogen Bonds and Its Effect on Electronic Coupling and Spin States

The exchange coupling of electron spins can strongly influence the properties of chemical species. The regulation of this type of electronic coupling has been explored within complexes that have multiple metal ions but to a lesser extent in complexes that pair a redox-active ligand with a single metal ion. To bridge this gap, we investigated the interplay among the structural and magnetic properties of mononuclear Cu complexes and exchange coupling between a Cu center and a redox-active ligand over three oxidation states. The computational analysis of the structural properties established a relationship between the complexes' magnetic properties and a bonding interaction involving a dx2-y2 orbital of the Cu ion and π orbital of the redox-active ligand that are close in energy. The additional bonding interaction affects the geometry around the Cu center and was found to be influenced by intramolecular H-bonds introduced by the external ligands. The ability to synthetically tune the d-π interactions using H-bonds illustrates a new type of control over the structural and magnetic properties of metal complexes.

Multielectron Redox Afforded by a Pincer Ligand Promoting Kumada Cross-Coupling Reactions

The redox-active nature of a pincer has been exploited to conduct C-C cross-coupling reactions under mild conditions. A nickel complex with a NNN pincer was dimeric in the solid state, and the structure displayed a Ni2 N2 diamond core. In the dimeric structure, both ligand backbones house an electron, in the iminosemiquinonate form, to keep the metal's oxidation state at +2. In the presence of an aryl Grignard reagent, only 3 mol % loading the nickel complex generates a Kumada cross-coupled product in good yield from a wide variety of aryl-X (X= I, Br, Cl) substrates. That the ligand-based radical remains responsible for promoting such a coupling reaction following a radical pathway is suggested by TEMPO quenching. Furthermore, a radical-clock experiment along with tracing product distribution unambiguously supported the radical's involvement through the catalytic cycle. A series of thorough mechanistic probation, including computational DFT analysis, disclosed the cooperative action of both redox-active pincer ligand and the metal centre to drive the reaction.

Unexplored Facet of Pincer Ligands: Super-Reductant Behavior Applied to Transition-Metal-Free Catalysis

Pincer ligands are well-established supporting ancillaries to afford robust coordination to metals across the periodic table. Despite their widespread use in developing homogeneous catalysts, the redox noninnocence of the ligand backbone is less utilized in steering catalytic transformations. This report showcases a trianionic, symmetric NNN-pincer to drive C-C cross-coupling reactions and heterocycle formation via C-H functionalization, without any coordination to transition metals. The starting substrates are aryl chlorides that can tease the limit of a catalyst's ability to promote a reductive cleavage at a much demanding potential of -2.90 V vs SCE. The reducing power of the simple trianionic ligand backbone has been tremendously amplified by shining visible light on it. The catalyst's success relies on its easy access to the one-electron oxidized iminosemiquinonate form that has been thoroughly characterized by X-band electron paramagnetic resonance spectroscopy through spectroelectrochemical experiments. The moderately long-lived excited-state lifetime (10.2 ns) and such a super-reductive ability dependent on the one-electron redox shuttle between the bisamido and iminosemiquinonato forms make this catalysis effective.

Dioxygen Splitting by a Tantalum(V) Complex Ligated by a Rigid, Redox Non-Innocent Pincer Ligand

The reaction of TaMe₃ Cl₂ with the rigid acridane-derived trisamine H₃ NNN yields the tantalum(V) complex [TaCl₂ (NNN^cat )]. Subsequent reaction with dioxygen results in the full four-electron reduction of O₂ yielding the oxido-bridged bimetallic complex [{TaCl₂ (NNN^sq )}₂ O]. This dinuclear complex features an open-shell ground state due to partial ligand oxidation and was comprehensively characterized by single crystal X-ray diffraction, LIFDI mass spectrometry, NMR, EPR, IR and UV/VIS/NIR spectroscopy. The mechanism of O₂ activation was investigated by DFT calculations revealing initial binding of O₂ to the tantalum(V) center followed by complete O₂ scission to produce a terminal oxido-complex.

Metal-ligand cooperative approaches in homogeneous catalysis using transition metal complex catalysts of redox noninnocent ligands

Catalysis offers a straightforward route to prepare various value-added molecules starting from readily available raw materials. The catalytic reactions mostly involve multi-electron transformations. Hence, compared to the inexpensive and readily available 3d-metals, the 4d and 5d-transition metals get an extra advantage for performing multi-electron catalytic reactions as the heavier transition metals prefer two-electron redox events. However, for sustainable development, these expensive and scarce heavy metal-based catalysts need to be replaced by inexpensive, environmentally benign, and economically affordable 3d-metal catalysts. In this regard, a metal-ligand cooperative approach involving transition metal complexes of redox noninnocent ligands offers an attractive alternative. The synergistic participation of redox-active ligands during electron transfer events allows multi-electron transformations using 3d-metal catalysts and allows interesting chemical transformations using 4d and 5d-metals as well. Herein we summarize an up-to-date literature report on the metal-ligand cooperative approaches using transition metal complexes of redox noninnocent ligands as catalysts for a few selected types of catalytic reactions.

CO2 Cleavage Reaction Driven by Alkylidyne Complexes of Group 6 Metals and Uranium: A Density Functional Theory Study on Energetics, Reaction Mechanism, and Structural/Bonding Properties

Designing novel catalysts is essential for the efficient conversion of metal alkylidyne into metal oxo ketene complexes in the presence of CO₂, which to some extent resolves the environmental concerns of the ever-increasing carbon emission. In this regard, a series of metal alkylidyne complexes, [b-ONO]M≡CCH₃(THF)₂ ([b-ONO] = {(C₆H₄[C(CF₃)₂O])₂N}^3-; M = Cr, Mo, W, and U), have been comprehensively studied by relativistic density functional theory calculations. The calculated thermodynamics and kinetics unravel that the tungsten complex is capable of catalyzing the CO₂ cleavage reaction, agreeing with the experimental findings for its analogue. Interestingly, the uranium complex shows superior catalytic performance because of the associated considerably lower energy barrier and larger reaction rate constant. The M≡C moiety in the complexes turns out to be the active site for the [2 + 2] cyclic addition. In contrast, complexes of Cr and Mo could not offer good catalytic performance. Along the reaction coordinate, the M-C (M = Cr, Mo, W, and U) bond regularly transforms from triple to double to single bonds; concomitantly, the newly formed M-O in the product is identified to have a triple-bond character. The catalytic reactions have been extensively explained and addressed by geometric/electronic structures and bonding analyses.

Mononuclear and Dinuclear Copper Complexes of Tridentate Redox-active Ligands with Tunable H-bonding Donors: Structure, Spectroscopy and H+ /e- Reactivity

In this research article, we describe the synthesis and characterization of mononuclear and dinuclear Cu complexes bound by a family of tridentate redox-active ligands with tunable H-bonding donors. The mononuclear Cu-anion complexes were oxidized to the corresponding "high-valent" intermediates by oxidation of the redox-active ligand. These species were capable of oxidizing phenols with weak O-H bonds via H-atom abstraction. Thermodynamic analysis of the H-atom abstractions, which included reduction potential measurements, pK_a determination and kinetic studies, revealed that modification of the anion coordinated to the Cu and changes in the H-bonding donor did not lead to major differences in the reactivity of the "high-valent" CuY complexes (Y: hydroxide, phenolate and acetate), which indicated that the tridentate ligand scaffold acts as the H⁺ and e^- acceptor.

Structure, Spectroscopy, and Reactivity of a Mononuclear Copper Hydroxide Complex in Three Molecular Oxidation States

Structural, spectroscopic, and reactivity studies are presented for an electron transfer series of copper hydroxide complexes supported by a tridentate redox-active ligand. Single crystal X-ray crystallography shows that the mononuclear [CuOH]¹⁺ core is stabilized via intramolecular H-bonds between the H-donors of the ligand and the hydroxide anion when the ligand is in its trianionic form. This complex undergoes two reversible oxidation processes that produce two metastable "high-valent" CuOH species, which can be generated by addition of stoichiometric amounts of 1e^- oxidants. These CuOH species are characterized by an array of spectroscopic techniques including UV-vis absorption, electron paramagnetic resonance (EPR), and X-ray absorption spectroscopies (XAS), which together indicate that all redox couples are ligand-localized. The reactivity of the complexes in their higher oxidation states toward substrates with modest O-H bond dissociation energies (e.g., 4-substitued-2,6-di-tert-butylphenols) indicates that these complexes act as 2H⁺/2e^- oxidants, differing from the 1H⁺/1e^- reactivity of well-studied [CuOH]²⁺ systems.

Heterobimetallic scandium–group 10 metal complexes with LM → Sc (LM = Ni, Pd, Pt) dative bonds

Heterobimetallic scandium–group 10 metal complexes featuring notable LM → Sc (LM = Ni, Pd, Pt) dative bonding interactions.

Radical-Type Reactivity and Catalysis by Single-Electron Transfer to or from Redox-Active Ligands

Controlled ligand-based redox-activity and chemical non-innocence are rapidly gaining importance for selective (catalytic) processes. This Concept aims to provide an overview of the progress regarding ligand-to-substrate single-electron transfer as a relatively new mode of operation to exploit ligand-centered reactivity and catalysis based thereon.

A new bis-phenolate mesoionic carbene ligand for early transition metal chemistry

A new chelating mesoionic carbene ligand, derived from 1,2,3-triazoles, with two redox-active tert-butyl-phenolate linkers has been synthesized and explored towards its reactivity and electrochemical properties in early transition metal chemistry.

Mononuclear complexes of a tridentate redox-active ligand with sulfonamido groups: structure, properties, and reactivity

The design of molecular complexes of earth-abundant first-row transition metals that can catalyze multi-electron C-H bond activation processes is of interest for achieving efficient, low-cost syntheses of target molecules. To overcome the propensity of these metals to perform single-electron processes, redox-active ligands have been utilized to provide additional electron equivalents. Herein, we report the synthesis of a novel redox active ligand, [ibaps]3-, which binds to transition metals such as FeII and CoII in a meridional fashion through the three anionic nitrogen atoms and provides additional coordination sites for other ligands. In this study, the neutral bidentate ligand 2,2'-bipyridine (bpy) was used to complete the coordination spheres of the metal ions and form NEt4[MII(ibaps)bpy] (M = Fe (1) or Co (1-Co)) salts. The FeII salt exhibited rich electrochemical properties and could be chemically oxidized by 1 and 2 equiv. of ferrocenium to form singly and doubly oxidized species, respectively. The reactivity of 1 towards intramolecular C-H bond amination of aryl azides at benzylic and aliphatic carbon centers was explored, and moderate to good yields of the resulting indoline products were obtained.

Synthesis and Characterization of Neutral Ligand α-Diimine Complexes of Aluminum with Tunable Redox Energetics

The synthesis and full characterization of a series of neutral ligand α-diimine complexes of aluminum are reported. The compounds [Al(L_Ar)₂Cl₂)][AlCl₄] [L_Ar = N, N'-bis(4-R-C₆H₄)-2,3-dimethyl-1,4-diazabutadiene] are structurally analogous, as determined by multinuclear NMR spectroscopy and solid-state X-ray diffraction, across a range of electron-donating [R = Me (2), ^tBu (3), OMe (4), and NMe₂ (5)] and electron-withdrawing [R = Cl (6), CF₃ (7), and NO₂ (8)] substituents in the aryl side arm of the ligand. UV-vis absorption spectroscopy and electrochemistry were used to access the optical and electrochemical properties, respectively, of the complexes. Both sets of properties are shown to be dependent on the R substituent. Density functional theory calculations performed on the [Al(L_Ph)₂Cl₂)][AlCl₄] complex (1) indicate primarily ligand-based frontier orbitals and were used to help support our discussion of both the spectral and electrochemical data. We also report the reaction of the L_Ph ligand with both AlBr₃ and AlI₃ and demonstrate a different reactivity profile for the heavier halide relative to the lighter members of the group.

Tuning the redox profiles of polyoxovanadate-alkoxide clusters via heterometal installation: toward designer redox Reagents

Herein, we describe a rational synthetic approach for tuning the electrochemical profiles of a series of Lindqvist polyoxovanadate-alkoxide clusters through heterometal functionalization. Synthetic procedures for group(IV) functionalization of the mixed-valent POV-alkoxide cluster, [V₆O₇(OCH₃)₁₂], are established, resulting in the heterometallic species, [NBu₄][V₅O₆(OCH₃)₁₂MOCH₃] (M = Ti, Zr, Hf). We demonstrate that these d⁰, heterometallic dopants anodically shift the potential of the electrochemical processes associated with the cluster, making the molecule more resistant to oxidation. Conversely, incorporation of electron rich heterometals yields a more readily oxidized molecule, with redox processes shifted cathodically. The predictable tuning and remarkable electrochemical profiles of this family of heterometal-functionalized polyoxometalates highlights their potential use as designer redox agents.

Redox-active diaminoazobenzene complexes of rhodium(iii): synthesis, structure and spectroscopic characterization

Coordination diversity of an aromatic diamine with Rh(iii) is presented together with the elucidation of the molecular and electronic structures, electron transfer, and electronic transitions.

Stable coordination complexes of α-diimines with Nb(v) and Ta(v) halides

Uncommon coordination compounds of high valent transition metal halides with N-aryl α-diimines have been obtained, without the need for reducing agents to quench the activation power of the metal centre.

Redox Noninnocent Azo-Aromatic Pincers and Their Iron Complexes. Isolation, Characterization, and Catalytic Alcohol Oxidation

The new redox-noninnocent azoaromatic pincers 2-(arylazo)-1,10-phenanthroline (L¹) and 2,9-bis(phenyldiazo)-1,10-phenanthroline (L²) are reported. The ligand L¹ is a tridentate pincer having NNN donor atoms, whereas L² is tetradentate having two azo-N donors and two N-donor atoms from the 1,10-phenanthroline moiety. Reaction of FeCl₂ with L¹ or L² produced the pentacoordinated mixed-ligand Fe(II) complexes FeL¹Cl₂ (1) and FeL²Cl₂ (2), respectively. Homoleptic octahedral Fe(II) complexes, mer-[Fe(L¹)₂](ClO₄)₂ [3](ClO₄)₂ and mer-[Fe(L²)₂](ClO₄)₂ [4](ClO₄)₂, have been synthesized from the reaction of hydrated Fe(ClO₄)₂ and L¹ or L². The ligand L², although having four donor sites available for coordination, binds the iron center in a tridentate fashion with one uncoordinated pendant azo function. Molecular and electronic structures of the isolated complexes have been scrutinized thoroughly by various spectroscopic techniques, single-crystal X-ray crystallography, and density functional theory. Beyond mere characterization, complexes 1 and 2 were successfully used as catalysts for the aerobic oxidation of primary and secondary benzylic alcohols. A wide variety of substituted benzyl alcohols were found to be converted to the corresponding carbonyl compounds in high yields, catalyzed by complex 1. Several control reactions were carried out to understand the mechanism of this alcohol oxidation reactions.

Exploiting Pincer Ligands to Perturb the Geometry at Boron

Boranes are ubiquitous in synthesis and materials but advancements in their development have been primarily restricted to the geometric energetic minima, trigonal planar complexes. This report discloses a class of boranes with expanded bond angles achieved by taking advantage of the structural rigidity of tridentate pincer ligands. The bonding of these novel boranes is investigated by X-ray crystallography and computationally.

Structural and Electronic Noninnocence of α-Diimine Ligands on Niobium for Reductive C-Cl Bond Activation and Catalytic Radical Addition Reactions

A d⁰ niobium(V) complex, NbCl₃(α-diimine) (1a), supported by a dianionic redox-active N,N'-bis(2,6-diisopropylphenyl)-1,4-diaza-2,3-dimethyl-1,3-butadiene (α-diimine) ligand (ene-diamido ligand) served as a catalyst for radical addition reactions of CCl₄ to α-olefins and cyclic alkenes, selectively affording 1:1 radical addition products in a regioselective manner. During the catalytic reaction, the α-diimine ligand smoothly released and stored an electron to control the oxidation state of the niobium center by changing between an η⁴-(σ²,π) coordination mode with a folded MN₂C₂ metallacycle and a κ²-(N,N') coordination mode with a planar MN₂C₂ metallacycle. Kinetic studies of the catalytic reaction elucidated the reaction order in the catalytic cycle: the radical addition reaction rate obeyed first-order kinetics that were dependent on the concentrations of the catalyst, styrene, and CCl₄, while a saturation effect was observed at a high CCl₄ concentration. In the presence of excess amounts of styrene, styrene coordinated in an η²-olefinic manner to the niobium center to decrease the reaction rate. No observation of oligomers or polymers of styrene and high stereoselectivity for the radical addition reaction of CCl₄ to cyclopentene suggested that the C-C bond formation proceeded inside the coordination sphere of niobium, which was in good accordance with the negative entropy value of the radical addition reaction. Furthermore, reaction of 1a with (bromomethyl)cyclopropane confirmed that both the C-Br bond activation and formation proceeded on the α-diimine-coordinated niobium center during transformation of the cyclopropylmethyl radical to a homoallyl radical. With regard to the reaction mechanism, we detected and isolated NbCl₄(α-diimine) (6a) as a transient one-electron oxidized species of 1a during reductive cleavage of the C-X bonds; in addition, the monoanionic α-diimine ligand of 6a adopted a monoanionic canonical form with selective one-electron oxidation of the dianionic ene-diamido form of the ligand in 1a.

Redox non-innocence permits catalytic nitrene carbonylation by (dadi)Ti[double bond, length as m-dash]NAd (Ad = adamantyl)

Application of the diamide, diimine {-CH[double bond, length as m-dash]N(1,2-C6H4)N(2,6-iPr2-C6H3)}2 m ((dadi) m ) ligand to titanium provided adducts (dadi)TiL x (1-L x ; L x = THF, PMe2Ph, (CNMe)2), which possess the redox formulation [(dadi)4-]Ti(iv)L x , and 22 πe- (4n + 2). Related complexes containing titanium-ligand multiple bonds, (dadi)Ti[double bond, length as m-dash]X (2 [double bond, length as m-dash]X; X = O, NAd), exhibit a different dadi redox state, [(dadi)2-]Ti(iv)X, consistent with 20 πe- (4n). The Redox Non-Innocence (RNI) displayed by dadi m impedes binding by CO, and permits catalytic conversion of AdN3 + CO to AdNCO + N2. Kinetics measurements support carbonylation of 2 [double bond, length as m-dash]NAd as the rate determining step. Structural and computational evidence for the observed RNI is provided.

Control of Ligand pKa Values Tunes the Electrocatalytic Dihydrogen Evolution Mechanism in a Redox-Active Aluminum(III) Complex

Redox-active ligands bring electron- and proton-transfer reactions to main-group coordination chemistry. In this Forum Article, we demonstrate how ligand pK_a values can be used in the design of a reaction mechanism for a ligand-based electron- and proton-transfer pathway, where the ligand retains a negative charge and enables dihydrogen evolution. A bis(pyrazolyl)pyridine ligand, ^iPrPz₂P, reacts with 2 equiv of AlCl₃ to afford [(^iPrPz₂P)AlCl₂(THF)][AlCl₄] (1). A reaction involving two-electron reduction and single-ligand protonation of 1 affords [(^iPrHPz₂P^-)AlCl₂] (2), where each of the electron- and proton-transfer events is ligand-centered. Protonation of 2 would formally close a catalytic cycle for dihydrogen production. At -1.26 V versus SCE, in a 0.3 M Bu₄NPF₆/tetrahydrofuran solution with salicylic acid or (HNEt₃)⁺ as the source of H⁺, 1 produced dihydrogen electrocatalytically, according to cyclic voltammetry and controlled potential electrolysis experiments. The mechanism for the reaction is most likely two electron-transfer steps followed by two chemical steps based on the available reactivity information. A comparison of this work with our previously reported aluminum complexes of the phenyl-substituted bis(imino)pyridine system (^PhI₂P) reveals that the pK_a values of the N-donor atoms in ^iPrPz₂P are lower, which facilitates reduction before ligand protonation. In contrast, the ^PhI₂P ligand complexes of aluminum are protonated twice before reduction liberates dihydrogen.

Mn(iv) and Mn(v)-radical species supported by the redox non-innocent bis(2-amino-3,5-di-tert-butylphenyl)amine pincer ligand

The electron-rich pincer ligand 1 has been synthesized and chelated to manganese. The octahedral Mn(iv) bis(diiminosemiquinonate) and Mn(v) (diiminobenzoquinone) (diiminosemiquinonate) radicals were structurally characterized.

Advances in Synthetic Applications of Hypervalent Iodine Compounds

The preparation, structure, and chemistry of hypervalent iodine compounds are reviewed with emphasis on their synthetic application. Compounds of iodine possess reactivity similar to that of transition metals, but have the advantage of environmental sustainability and efficient utilization of natural resources. These compounds are widely used in organic synthesis as selective oxidants and environmentally friendly reagents. Synthetic uses of hypervalent iodine reagents in halogenation reactions, various oxidations, rearrangements, aminations, C-C bond-forming reactions, and transition metal-catalyzed reactions are summarized and discussed. Recent discovery of hypervalent catalytic systems and recyclable reagents, and the development of new enantioselective reactions using chiral hypervalent iodine compounds represent a particularly important achievement in the field of hypervalent iodine chemistry. One of the goals of this Review is to attract the attention of the scientific community as to the benefits of using hypervalent iodine compounds as an environmentally sustainable alternative to heavy metals.

Synthesis and Characterization of Paramagnetic Tungsten Imido Complexes Bearing α-Diimine Ligands

Tungsten imido complexes bearing a redox-active ligand, such as N,N'-bis(2,6-diisopropylphenyl)-1,4-diaza-2,3-dimethyl-1,3-butadiene (L1), N,N'-bis(2,6-diisopropylphenyl)-1,4-diaza-1,3-butadiene (L2), and 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (L3), were prepared by salt-free reduction of W(═NC6H3-2,6-(i)Pr2)Cl4 (1) using 1-methyl-3,6-bis(trimethylsilyl)-1,4-cyclohexadiene (MBTCD) followed by addition of the corresponding redox-active ligands. In the initial stage, reaction of W(═NC6H3-2,6-(i)Pr2)Cl4 with MBTCD afforded a tetranuclear W(V) imido cluster, [W(═NC6H3-2,6-(i)Pr2)Cl3]4 (2), which served as a unique precursor for introducing redox-active ligands to the tungsten center to give the corresponding mononuclear complexes with a general formula of W(═NC6H3-2,6-(i)Pr2)Cl3(L) (3, L = L1; 4, L = L2; and 6, L = L3). X-ray analyses of complexes 3 and 6 revealed a neutral coordination mode of L1 and L3 to the tungsten in solid state, while the electron paramagnetic resonance (EPR) spectra of 3 and 4 clarified that a radical was predominantly located on the tungsten center supported by neutral L1 or L2, and the EPR spectra of complex 6 indicated that a radical was delocalized over both the tungsten center and the monoanionic redox-active ligand L3.

RhCl(PPh3)3-mediated C–H oxyfunctionalization of pyrrolido-functionalized bisazoaromatic pincers: a combined experimental and theoretical scrutiny of redox-active and spectroscopic properties

Non-trivial coordination mode of symmetrical NNN ligands with Rh(iii) leads to redox-active NNO-scaffolds via C(sp²)–H oxyfunctionalization at rt, opening an opportunity to juxtapose different redox-active domains.

Synthesis and reactivity of Li and TaMe3 complexes supported by N,N′-bis(2,6-diisopropylphenyl)-o-phenylenediamido ligands

Redox-active diamido ligands sponsor heterodinuclear TaLi complexes and a TaMe₃ species which undergoes photoreduction to yield a Ta(iv) dimer.