Photosystem II like water oxidation mechanism in a bioinspired tetranuclear manganese complex

Regeneration and Degradation in a Biomimetic Polyoxometalate Water Oxidation Catalyst

Complete understanding of catalytic cycles is required to advance the design of water oxidation catalysts, but it is difficult to attain, due to the complex factors governing their reactivity and stability. In this study, we investigate the regeneration and degradation pathways of the highly active biomimetic water oxidation catalyst [Mn3+ 2Mn4+ 2V4O17(OAc)3]3-, thereby completing its catalytic cycle. Beginning with the deactivated species [Mn3+ 4V4O17(OAc)2]4- left over after O2 evolution, we scrutinize a network of reaction intermediates belonging to two alternative water oxidation cycles. We find that catalyst regeneration to the activated species [Mn4+ 4V4O17(OAc)2(OH)(H2O)]- proceeds via oxidation of each Mn center, with one water ligand being bound during the first oxidation step and a second water ligand being bound and deprotonated during the final oxidation step. ΔΔG values for this last oxidation are consistent with previous experimental results, while regeneration within an alternative catalytic cycle was found to be thermodynamically unfavorable. Extensive in silico sampling of catalyst structures also revealed two degradation processes: cubane opening and ligand dissociation, both of which have low barriers at highly reduced states of the catalyst due to the presence of Jahn-Teller effects. These mechanistic insights are expected to spur the development of more efficient and stable Mn cubane water oxidation catalysts.

Theoretical Study on the Electro-Reduction of Carbon Dioxide to Methanol Catalyzed by Cobalt Phthalocyanine

Density functional theory (DFT) calculations have been conducted to investigate the mechanism of cobalt(II) tetraamino phthalocyanine (CoPc-NH₂) catalyzed electro-reduction of CO₂. Computational results show that the catalytically active species 1 (⁴[Co^II(H₄L)]⁰) is formed by a four-electron-four-proton reduction of the initial catalyst CoPc-NH₂. Complex 1 can attack CO₂ after a one-electron reduction to give a [Co^III-CO₂^2-]^- intermediate, followed by a protonation and a one-electron reduction to give intermediate [Co^II-COOH]^- (4). Complex 4 is then protonated on its hydroxyl group by a carbonic acid to generate the critical species 6 (Co^III-L^•--CO), which can release the carbon monoxide as an intermediate (and also as a product). In parallel, complex 6 can go through a successive four-electron-four-proton reduction to produce the targeted product methanol without forming formaldehyde as an intermediate product. The high-lying π orbital and the low-lying π* orbital of the phthalocyanine endow the redox noninnocent nature of the ligand, which could be a dianion, a radical monoanion, or a radical trianion during the catalysis. The calculated results for the hydrogen evolution reaction indicate a higher energy barrier than the carbon dioxide reduction. This is consistent with the product distribution in the experiments. Additionally, the amino group on the phthalocyanine ligand was found to have a minor effect on the barriers of critical steps, and this accounts for the experimentally observed similar activity for these two catalysts, namely, CoPc-NH₂ and CoPc.

Water Oxidation Catalyzed by a Bioinspired Tetranuclear Manganese Complex: Mechanistic Study and Prediction

Density functional theory calculations were utilized to elucidate the water oxidation mechanism catalyzed by polyanionic tetramanganese complex a [Mn^III ₃ Mn^IV O₃ (CH₃ COO)₃ (A-α-SiW₉ O₃₄ )]^6- . Theoretical results indicated that catalytic active species 1 (Mn₄ ^{III,III,IV,IV} ) was formed after O₂ formation in the first turnover. From 1, three sequential proton-coupled electron transfer (PCET) oxidations led to the Mn^IV -oxyl radical 4 (Mn₄ ^IV,IV,IV,IV -O⋅). Importantly, 4 had an unusual butterfly-shaped Mn₂ O₂ core for the two substrate-coordinated Mn sites, which facilitated O-O bond formation via direct coupling of the oxyl radical and the adjacent Mn^IV -coordinated hydroxide to produce the hydroperoxide intermediate Int1 (Mn₄ ^III,IV,IV,IV -OOH). This step had an overall energy barrier of 24.9 kcal mol^-1 . Subsequent PCET oxidation of Int1 to Int2 (Mn₄ ^III,IV,IV,IV -O₂ ⋅) enabled the O₂ release in a facile process. Furthermore, apart from the Si-centered complex, computational study suggested that tetramanganese polyoxometalates with Ge, P, and S could also catalyze the water oxidation process, where those bearing P and S likely present higher activities.

Surprisingly Low Reactivity of Layered Manganese Oxide toward Water Oxidation in Fe/Ni-Free Electrolyte under Alkaline Conditions

So far, many studies on the oxygen-evolution reaction (OER) by Mn oxides have been focused on activity; however, the identification of the best performing active site and corresponding catalytic cycles is also of critical importance. Herein, the real intrinsic activity of layered Mn oxide toward OER in Fe/Ni-free KOH is studied for the first time. At pH ≈ 14, the onset of OER for layered Mn oxide in the presence of Fe/Ni-free KOH happens at 1.72 V (vs reversible hydrogen electrode (RHE)). In the presence of Fe ions, a 190 mV decrease in the overpotential of OER was recorded for layered Mn oxide as well as a significant decrease (from 172.8 to 49 mV/decade) in the Tafel slope. Furthermore, we find that both Ni and Fe ions increase OER remarkably in the presence of layered Mn oxide, but that pure layered Mn oxide is not an efficient catalyst for OER without Ni and Fe under alkaline conditions. Thus, pure layered Mn oxide and electrolytes are critical factors in finding the real intrinsic activity of layered Mn oxide for OER. Our results call into question the high efficiency of layered Mn oxides toward OER under alkaline conditions and also elucidate the significant role of Ni and Fe impurities in the electrolyte in the presence of layered Mn oxide toward OER under alkaline conditions. Overall, a computational model supports the conclusions from the experimental structural and electrochemical characterizations. In particular, substitutional doping with Fe decreases the thermodynamic OER overpotential up to 310 mV. Besides, the thermodynamic OER onset potential calculated for the Fe-free structures is higher than 1.7 V (vs RHE) and, thus, not in the stability range of Mn oxides.

Soft x-ray signatures of ionic manganese-oxo systems, including a high-spin manganese(V) complex

Manganese-oxo species catalyze key reactions, including C–H bond activation or dioxygen formation in natural photosynthesis. To better understand relevant reaction intermediates, we characterize electronic states and geometric structures of [MnOn]+...

Flexibility Enhances Reactivity: Redox Isomerism and Jahn-Teller Effects in a Bioinspired Mn4O4 Cubane Water Oxidation Catalyst

Understanding how water oxidation to molecular oxygen proceeds in molecular metal-oxo catalysts is a challenging endeavor due to their structural complexity. In this report, we unravel the water oxidation mechanism of the highly active water oxidation catalyst [Mn4V4O17(OAc)3]3-, a polyoxometalate catalyst with a [Mn4O4]6+ cubane core reminiscent of the natural oxygen-evolving complex. Starting from the activated species [Mn4 4+V4O17(OAc)2(H2O)(OH)]1-, we scrutinized multiple pathways to find that water oxidation proceeds via a sequential proton-coupled electron transfer (PCET), O-O bond formation, another PCET, an intramolecular electron transfer, and another PCET resulting in O2 evolution, with a predicted thermodynamic overpotential of 0.71 V. An in-depth investigation of the O-O bond formation process revealed an essential interplay between redox isomerism and Jahn-Teller effects, responsible for enhancing reactivity in the catalytic cycle. This is achieved by redistributing electrons between metal centers and weakening relevant bonds through Jahn-Teller distortions, introducing flexibility to the otherwise rigid cubane core of the catalyst. These mechanistic insights are expected to advance the design of efficient bioinspired Mn cubane water-splitting catalysts.

Theoretical Insight into the Performance of MnII/III-Monosubstituted Heteropolytungstates as Water Oxidation Catalysts

The performance of Mn^II/III-monosubstituted heteropolytungstates [Mn^III(H₂O)GeW₁₁O₃₉]^5- ([GT-Mn^III-OH₂]^5-, where GT = GeW₁₁O₃₉) and [Mn^II(H₂O)GeW₁₁O₃₉]^6- ([GT-Mn^II-OH₂]^6-) as water oxidation catalysts at pH 9 was explored using density functional theory calculations. The counterion effect was fully considered, in which five and six Na⁺ ions were included in the calculations for water oxidation catalyzed by [GT-Mn^III-OH₂]^5- and [GT-Mn^II-OH₂]^6-, respectively. The process of water oxidation catalysis was divided into three elemental stages: (i) oxidative activation, (ii) O-O bond formation, and (iii) O₂ evolution. In the oxidative activation stage, two electrons and two protons are removed from [Na₅-GT-Mn^III-OH₂] and three electrons and two protons are removed from [Na₆-GT-Mn^II-OH₂]. Therefore, the Mn^IV-O^• species [Na₅-GT-Mn^IV-O^•] is obtained. Two mechanisms, (i) water nucleophilic attack and (ii) oxo-oxo coupling, were demonstrated to be competitive in O-O bond formation triggered from [Na₅-GT-Mn^IV-O^•]. In the last stage, the O₂ molecule could be readily evolved from the peroxo or dinuclear species and the catalyst returns to the ground state after the coordination of a water molecule(s).

Quantum Chemical Study of the Mechanism of Water Oxidation Catalyzed by a Heterotrinuclear Ru2 Mn Complex

The heterotrinuclear complex A {[Ru^II (H₂ O)(tpy)]₂ (μ-[Mn^II (H₂ O)₂ (bpp)₂ ])}⁴⁺ [tpy=2,2':6',2''-terpyridine, bpp=3,5-bis(2-pyridyl)pyrazolate] was found to catalyze water oxidation both electrochemically and photochemically with [Ru(bpy)₃ ]³⁺ (bpy=2,2'-bipyridine) as the photosensitizer and Na₂ S₂ O₈ as the electron acceptor in neutral phosphate buffer. The mechanism of water oxidation catalyzed by this unprecedented trinuclear complex was studied by density functional calculations. The calculations showed that a series of oxidation and deprotonation events take place from A, leading to the formation of complex 1 (formal oxidation state of Ru1^IV Mn^III Ru2^III ), which is the starting species for the catalytic cycle. Three sequential oxidations of 1 result in the generation of the catalytically competing species 4 (formal oxidation state of Ru1^IV Mn^V Ru2^IV ), which triggers the O-O bond formation. The direct coupling of two adjacent oxo ligands bound to Ru and Mn leads to the production of a superoxide intermediate Int1. This step was calculated to have a barrier of 7.2 kcal mol^-1 at the B3LYP*-D3 level. Subsequent O₂ release from Int1 turns out to be quite facile. Other possible pathways were found to be much less favorable, including water nucleophilic attack, the coupling of an oxo and a hydroxide, and the direct coupling pathway at a lower oxidation state (Ru^IV Mn^IV Ru^IV ).

Kinetics and mechanisms of catalytic water oxidation

The kinetics and mechanisms of thermal and photochemical oxidation of water with homogeneous and heterogeneous catalysts, including conversion from homogeneous to heterogeneous catalysts in the course of water oxidation, are discussed in this review article. Molecular and homogeneous catalysts have the advantage to clarify the catalytic mechanisms by detecting active intermediates in catalytic water oxidation. On the other hand, heterogeneous nanoparticle catalysts have advantages for practical applications due to high catalytic activity, robustness and easier separation of catalysts by filtration as compared with molecular homogeneous precursors. Ligand oxidation of homogeneous catalysts sometimes results in the dissociation of ligands to form nanoparticles, which act as much more efficient catalysts for water oxidation. Since it is quite difficult to identify active intermediates on the heterogeneous catalyst surface, the mechanism of water oxidation has hardly been clarified under heterogeneous catalytic conditions. This review focuses on the kinetics and mechanisms of catalytic water oxidation with homogeneous catalysts, which may be converted to heterogeneous nanoparticle catalysts depending on various reaction conditions.

Mechanism of Water Oxidation Catalyzed by a Mononuclear Iron Complex with a Square Polypyridine Ligand: A DFT Study

The mononuclear [Cl-Fe^III(dpa)-Cl]⁺ (1_Cl) complex containing a square planar tetradentate polypyridine ligand has been reported to catalyze water oxidation in pH = 1 aqueous medium with ceric ammonium nitrate (CAN) as a chemical oxidant. The reaction mechanism of the oxygen evolution driven by this catalyst was investigated by means of density functional calculations. The results showed that one chloride ligand of 1_Cl has to exchange with a water molecule to generate 1, [Cl-Fe^III(dpa)-OH₂]²⁺, as the starting species of the catalytic cycle. The initial one-electron oxidation of 1 is coupled with the release of two protons, generating [Cl-Fe^IV(dpa)═O]⁺ (2). Another one-electron transfer from 2 leads to the formation of an Fe^V═O complex [Cl-Fe^V(dpa)═O]²⁺ (3), which triggers the critical O-O bond formation. The electronic structure of 3 was found to be very similar to that of the high-valent heme-iron center of P450 enzymes, termed Compound I, in which a π-cation radical ligand is believed to support a formal iron(IV)-oxo core. More importantly, 3 and Compound I share the same tendency toward electrophilic reactions. Two competing pathways were suggested for the O-O bond formation based on the present calculations. One is the nitrate nucleophilic attack on the iron(V)-oxo moiety with a total barrier of 12.3 kcal mol^-1. In this case, nitrate functions as a co-catalyst for the dioxygen formation. The other is the water nucleophilic attack on iron(V)-oxo with a greater barrier of 16.5 kcal mol^-1. In addition, ligand degradation via methyl hydrogen abstraction was found to have a barrier similar to that of the O-O bond formation, while the aromatic carbon hydroxylation has a higher barrier.

Efficient molecular ruthenium catalysts containing anionic ligands for water oxidation

Two new mononuclear Ru complexes Ru^II(bipa)(pic)₃ (1; H₂bipa = 6-(1H-benzo[d]imidazol-2-yl)picolinic acid, pic = 4-picoline) and Ru^II(pbic)(pic)₃ (2; H₂pbic = 2-(pyridin-2-yl)-1H-benzo[d]imidazole-7-carboxylic acid, pic = 4-picoline) based on anionic ligands were successfully synthesized, and characterized using NMR spectroscopy, mass spectrometry, and X-ray crystallography. These catalysts showed high activities and stabilities in water oxidation in homogeneous systems with a high turnover number of 2100 and a turnover frequency of 0.21 s^-1 for complex 1. The O-O band formation mechanism involved water nucleophilic attack. An active catalytic intermediate, i.e., Ru^IV-OH, was detected using high-resolution mass spectrometry.

Using theoretical calculations to predict the redox potential of mononuclear manganese complexes

Prediction of redox potential allows chemists to rationally design metal complexes with a desired redox activity.

Heavy Metal-Free Tannin from Bark for Sustainable Energy Storage

A novel renewable cathode made from earth abundant, low-cost materials can contribute to the intermittent storage needs of renewable energy-based society. In this work, we report for the first-time tannin from Nature as a cathode material. Our approach exploits the charge storage mechanism of the redox active quinone moiety. Tannins extracted from tree bark using environmental friendly aqueous solvents have the highest phenol content (5.56 mol g^-1) among all the natural phenolic biopolymers, 5000 times higher than lignin. Tannins coupled with a conductive polymer polypyrrole acquire high specific capacitance values of 370 F g^-1 at 0.5 A g^-1 as well as excellent rate performance of 196 F g^-1 at 25 A g^-1. Additionally, we employed carbonized wood as an electrode substrate to produce a sustainable electrochemical device with dramatically improved performance compared to conventional devices. The high surface area provided by the well-aligned, cellular porosity of wood-derived substrate combined with the high mobility of ions and electrons in the carbonized cell walls and deposited tannin can achieve an areal capacitance of 4.6 F cm^-2 at 1 mA cm^-2, which is 1.5 times higher than activated wood carbon.

Quantum Chemical Modeling of Homogeneous Water Oxidation Catalysis

The design of efficient and robust water oxidation catalysts has proven challenging in the development of artificial photosynthetic systems for solar energy harnessing and storage. Tremendous progress has been made in the development of homogeneous transition-metal complexes capable of mediating water oxidation. To improve the efficiency of the catalyst and to design new catalysts, a detailed mechanistic understanding is necessary. Quantum chemical modeling calculations have been successfully used to complement the experimental techniques to suggest a catalytic mechanism and identify all stationary points, including transition states for both O-O bond formation and O₂ release. In this review, recent progress in the applications of quantum chemical methods for the modeling of homogeneous water oxidation catalysis, covering various transition metals, including manganese, iron, cobalt, nickel, copper, ruthenium, and iridium, is discussed.

Mechanism of Water Oxidation Catalyzed by a Mononuclear Manganese Complex

The design and synthesis of biomimetic Mn complexes to catalyze oxygen evolution is a very appealing goal because water oxidation in nature employs a Mn complex. Recently, the mononuclear Mn complex [LMn^II (H₂ O)₂ ]²⁺ [1, L=Py₂ N(tBu)₂ , Py=pyridyl] was reported to catalyze water oxidation electrochemically at an applied potential of 1.23 V at pH 12.2 in aqueous solution. Density functional calculations were performed to elucidate the mechanism of water oxidation promoted by this catalyst. The calculations showed that 1 can lose two protons and one electron readily to produce [LMn^III (OH)₂ ]⁺ (2), which then undergoes two sequential proton-coupled electron-transfer processes to afford [LMn^V OO]⁺ (4). The O-O bond formation can occur through direct coupling of the two oxido ligands or through nucleophilic attack of water. These two mechanisms have similar barriers of approximately 17 kcal mol^-1 . The further oxidation of 4 to generate [LMn^VI OO]²⁺ (5), which enables O-O bond formation, has a much higher barrier. In addition, ligand degradation by C-H activation has a similar barrier to that for the O-O bond formation, and this explains the relatively low turnover number of this catalyst.

Iron–manganese–titanium (1 : 1 : 2) oxide composite thin films for improved photocurrent efficiency

Fe₂MnTi₃O₁₀–MnTiO₃ composite thin films with a photocurrent density of 1.88 mA cm⁻² at 0.2 V have been deposited through AACVD.

Water oxidation mediated by ruthenium oxide nanoparticles supported on siliceous mesocellular foam

An efficient catalyst for chemical and photochemical water oxidation was developed by immobilization of RuO₂ nanoparticles on pyridine-functionalized mesoporous silica.

Chemical and Photochemical Water Oxidation Mediated by an Efficient Single-Site Ruthenium Catalyst

Water oxidation is a fundamental step in artificial photosynthesis for solar fuels production. In this study, we report a single-site Ru-based water oxidation catalyst, housing a dicarboxylate-benzimidazole ligand, that mediates both chemical and light-driven oxidation of water efficiently under neutral conditions. The importance of the incorporation of the negatively charged ligand framework is manifested in the low redox potentials of the developed complex, which allows water oxidation to be driven by the mild one-electron oxidant [Ru(bpy)3 ]3+ (bpy=2,2'-bipyridine). Furthermore, combined experimental and DFT studies provide insight into the mechanistic details of the catalytic cycle.

Manganese Compounds as Water-Oxidizing Catalysts: From the Natural Water-Oxidizing Complex to Nanosized Manganese Oxide Structures

All cyanobacteria, algae, and plants use a similar water-oxidizing catalyst for water oxidation. This catalyst is housed in Photosystem II, a membrane-protein complex that functions as a light-driven water oxidase in oxygenic photosynthesis. Water oxidation is also an important reaction in artificial photosynthesis because it has the potential to provide cheap electrons from water for hydrogen production or for the reduction of carbon dioxide on an industrial scale. The water-oxidizing complex of Photosystem II is a Mn-Ca cluster that oxidizes water with a low overpotential and high turnover frequency number of up to 25-90 molecules of O2 released per second. In this Review, we discuss the atomic structure of the Mn-Ca cluster of the Photosystem II water-oxidizing complex from the viewpoint that the underlying mechanism can be informative when designing artificial water-oxidizing catalysts. This is followed by consideration of functional Mn-based model complexes for water oxidation and the issue of Mn complexes decomposing to Mn oxide. We then provide a detailed assessment of the chemistry of Mn oxides by considering how their bulk and nanoscale properties contribute to their effectiveness as water-oxidizing catalysts.

A ruthenium water oxidation catalyst based on a carboxamide ligand

Herein is presented a single-site Ru complex bearing a carboxamide-based ligand that efficiently manages to carry out the four-electron oxidation of H₂O.

Fabrication of pristine Mn2O3and Ag–Mn2O3composite thin films by AACVD for photoelectrochemical water splitting

Pristine Mn₂O₃and Ag–Mn₂O₃nanocomposite thin films deposited by AACVD on FTO showed photocurrent densities of 1.8 and 3 mA cm⁻²respectively.

On the mechanism of water oxidation catalyzed by a dinuclear ruthenium complex: a quantum chemical study

The development of efficient and robust catalysts for water oxidation is an essential element in solar water splitting. In the present paper, the reaction mechanism for a dinuclear Ru water oxidation catalyst has been investigated in detail through quantum chemical calculations.

Molecular ruthenium water oxidation catalysts carrying non-innocent ligands: mechanistic insight through structure–activity relationships and quantum chemical calculations

Herein is highlighted how structure–activity relationships can be used to provide mechanistic insight into H₂O oxidation catalysis.

Water oxidation using earth-abundant transition metal catalysts: opportunities and challenges

Catalysts for the oxidation of water are a vital component of solar energy to fuel conversion technologies. This Perspective summarizes recent advances in the field of designing homogeneous water oxidation catalysts (WOCs) based on Mn, Fe, Co and Cu.

Water oxidation catalyzed by molecular di- and nonanuclear Fe complexes: importance of a proper ligand framework

The synthesis of two molecular iron complexes, a dinuclear iron(iii,iii) complex and a nonanuclear iron complex, and their use as water oxidation catalysts is described.

A Dinuclear Ruthenium-Based Water Oxidation Catalyst: Use of Non-Innocent Ligand Frameworks for Promoting Multi-Electron Reactions

Insight into how H2 O is oxidized to O2 is envisioned to facilitate the rational design of artificial water oxidation catalysts, which is a vital component in solar-to-fuel conversion schemes. Herein, we report on the mechanistic features associated with a dinuclear Ru-based water oxidation catalyst. The catalytic action of the designed Ru complex was studied by the combined use of high-resolution mass spectrometry, electrochemistry, and quantum chemical calculations. Based on the obtained results, it is suggested that the designed ligand scaffold in Ru complex 1 has a non-innocent behavior, in which metal-ligand cooperation is an important part during the four-electron oxidation of H2 O. This feature is vital for the observed catalytic efficiency and highlights that the preparation of catalysts housing non-innocent molecular frameworks could be a general strategy for accessing efficient catalysts for activation of H2 O.

Catalytic water oxidation by a molecular ruthenium complex: unexpected generation of a single-site water oxidation catalyst

The increasing energy demand calls for the development of sustainable energy conversion processes. Here, the splitting of H2O to O2 and H2, or related fuels, constitutes an excellent example of solar-to-fuel conversion schemes. The critical component in such schemes has proven to be the catalyst responsible for mediating the four-electron oxidation of H2O to O2. Herein, we report on the unexpected formation of a single-site Ru complex from a ligand envisioned to accommodate two metal centers. Surprising N-N bond cleavage of the designed dinuclear ligand during metal complexation resulted in a single-site Ru complex carrying a carboxylate-amide motif. This ligand lowered the redox potential of the Ru complex sufficiently to permit H2O oxidation to be carried out by the mild one-electron oxidant [Ru(bpy)3](3+) (bpy = 2,2'-bipyridine). The work thus highlights that strongly electron-donating ligands are important elements in the design of novel, efficient H2O oxidation catalysts.