1D polymeric platinum cyanoximate: a strategy toward luminescence in the near-infrared region beyond 1000 nm

Achiral Au(I) Cyclic Trinuclear Complexes with High-Efficiency Circularly Polarized Near-Infrared TADF

Realizing high photoluminescence quantum yield (PLQY) in the near-infrared (NIR) region is challenging and valuable for luminescent material, especially for thermally activated delay fluorescence (TADF) material. In this work, we report two achiral cyclic trinuclear Au(I) complexes, Au3 (4-Clpyrazolate)3 and Au3 (4-Brpyrazolate)3 (denoted as Cl-Au and Br-Au), obtained through the reaction of 4-chloro-1H-pyrazole and 4-bromo-1H-pyrazole with Au(I) salts, respectively. Both Cl-Au and Br-Au exhibit TADF with high PLQY (>70 %) in the NIR I (700-900 nm) (λmax = 720 nm) region, exceeding other NIR-TADF emitters in the solid state. Photophysical experiments and theoretical calculations confirmed the efficient NIR-TADF properties of Cl-Au and Br-Au were attributed to the small energy gap ΔE(S1-T2) (S = singlet, T = triplet) and the large spin-orbital coupling induced by ligand-to-metal-metal charge transfer of molecular aggregations. In addition, both complexes crystallize in the achiral Pna21 space group (mm2 point group) and are circularly polarized light (CPL) active with maxima luminescent dissymmetry factor |glum | of 3.4 × 10-3 (Cl-Au) and 2.7 × 10-3 (Br-Au) for their crystalline powder samples, respectively. By using Cl-Au as the emitting ink, 3D-printed luminescent logos are fabricated, which own anti-counterfeiting functions due to its CPL behavior dependent on the crystallinity.

Synthesis and Characterization of Pt(II) and Pd(II) Complexes with Planar Aromatic Oximes

A series of four Werner-type complexes of Pd(II) and Pt(II) with planar, isomeric conjugated aromatic naphtoquinone oximes were synthesized for the first time. These ligands were 1-oxime-2-naphtoquinone (HL1) and 2-oxime-1-napthoquinone (HL2). Compounds were characterized using thermal analysis, spectroscopic methods, and X-ray analysis. TG/DSC data were collected for pure starting organic ligands, their complexes, and indicated vigorous exothermic decomposition with at ~155 °C for starting HL and ~350 °C for transition metal complexes. Crystal structures for two Pt compounds with 2-oxime-1-quinone were determined and revealed the formation of the cis-geometry complexes and incorporation of molecules of stoichiometric solvents in the lattice: acetonitrile and nitrobenzene. Both solvents of crystallization displayed attractive interactions between their C-H groups and the oxygen atoms of the nitroso groups in complexes, leading to short distances in those fragments. Despite the presence of solvents of inclusion, the overall structure motifs in both compounds represent 1D columnar coordination polymer, in which the PtL2 units are held together via metallophilic interactions, thereby forming ‘Pt-wires’. The Hirshfield surface analysis was performed for both crystallographically characterized complexes. The results showed intermolecular π–π stacking and Pt–Pt interactions among the planar units of both complexes. In addition, the analysis also verified the presence of hydrogen bonding interactions between the platinum unit and solvent molecules. Solid bulk powdery samples of both PtL12 and PtL22 demonstrated pronounced photoluminescence in the near infrared region of spectrum at ~980 nm, being excited in the range of 750–800 nm. The NIR emission was observed only for Pt-complexes and not for pure starting organic ligands or Pd-complexes. Additionally, synthesized Pt-naphtoquinone oximes do not show luminescence in solutions, which suggests the importance of a 1D ‘metal wire’ structure for this process.

Hydrogen-bonding landscape of the carbamoylcyanonitrosomethanide anion in the crystal structure of its ammonium salt

The structure of the title salt, ammonium carbamoyl­cyano­nitro­somethanide, NH₄⁺·C₃H₂N₃O₂⁻, features the co-existence of different hydrogen-bonding patterns, which are specific to each of the three functional groups (nitroso, carbamoyl and cyano) of the methanide anion. The relatively simple scheme of these inter­actions allows the delineation of the supra­molecular synthons, which may be applicable to crystal engineering of hydrogen-bonded solids containing polyfunctional methanide anions.

The structure of the title salt, ammonium carbamoyl­cyano­nitro­somethanide, NH₄⁺·C₃H₂N₃O₂⁻, features the co-existence of different hydrogen-bonding patterns, which are specific to each of the three functional groups (nitroso, carbamoyl and cyano) of the methanide anion. The nitroso O-atoms accept as many as three N—H⋯O bonds from the ammonium cations [N⋯O = 2.688 (3)–3.000 (3) Å] to form chains of fused rhombs [(NH₄)(O)₂]. The most prominent bonds of the carbamoyl groups are mutual and they yield 2₁ helices [N⋯O = 2.903 (2) Å], whereas the cyano N-atoms accept hydrogen bonds from sterically less accessible carbamoyl H-atoms [N⋯N = 3.004 (3) Å]. Two weaker NH₄⁺⋯O=C bonds [N⋯O = 3.021 (2), 3.017 (2) Å] complete the hydrogen-bonded environment of the carbamoyl groups. A Hirshfeld surface analysis indicates that the most important inter­actions are overwhelmingly O⋯H/H⋯O and N⋯H/H⋯N, in total accounting for 64.1% of the contacts for the individual anions. The relatively simple scheme of these inter­actions allows the delineation of the supra­molecular synthons, which may be applicable to crystal engineering of hydrogen-bonded solids containing polyfunctional methanide anions.

Strategy for Achieving Long-Wavelength Near-Infrared Luminescence of Diimineplatinum(II) Complexes

Although many strategies have been used to help design effective near-infrared (NIR) luminescent materials, it is still a huge challenge to realize long-wavelength NIR luminescence of diimineplatinum(II) complexes in the solid state. Herein, we have successfully achieved long-wavelength NIR luminescence of a family of diimineplatinum(II) complexes based on a new strategy that combines a one-dimensional (1D) "Pt wire" structure with the electronic effect of the substituent. The structures of six solvated diimineplatinum(II) complexes based on 4,4-dichloro-2,2'-bipyridine or 4,4-dibromo-2,2'-bipyridine and 4-substituted phenylacetylene ligands have been determined, namely, 1·¹/₂toluene, 2·¹/₂THF, 3·¹/₈toluene, 4·¹/₂THF, 5·¹/₈CH₂Cl₂, and 6·¹/₄toluene. All of them crystallize in the monoclinic space group C2/c or C2/m and stack in the 1D "Pt wire" structure. In the solid state, six complexes exhibited unusual long-wavelength metal-metal-to-ligand charge-transfer luminescence that peaked at 984, 1044, 972, 990, 1022, and 935 nm, respectively. Interestingly, 2·¹/₂THF has the shortest Pt···Pt distance and the longest emission wavelength among the six complexes. As far as we know, the luminescence of 2·¹/₂THF at 1044 nm is the longest emission wavelength among known diimineplatinum(II) complexes. Systematic studies revealed that good molecular planarity, suitable substituent position, weak hydrogen-bond-forming ability of the substituents, appropriate molecular bending, and weakening of the interaction between solvated molecules and platinum molecules are conducive to the construction of a 1D "Pt wire" structure of the diimineplatinum(II) complex. Furthermore, the emission energy of the complex is mainly determined by the strength of the Pt-Pt interaction and electronic effect of the substituent.

Long-wavelength NIR luminescence of 2,2′-bipyridyl-Pt(ii) dimers achieved by enhanced Pt–Pt interaction

Benefiting from the very strong intermolecular Pt–Pt interaction, 2,2′-bipyridyl-Pt(ii) dimers have achieved long-wavelength near-infrared luminescence exceeding 1000 nm for the first time.

New in vitro highly cytotoxic platinum and palladium cyanoximates with minimal side effects in vivo

Several biologically active bivalent Pd and Pt complexes with two structurally similar cyanoxime ligands abbreviated as H(DECO): 2-oximino-2-cyano-N,N'-diethylacetamide, and H(PyrCO): 2-oximino-2-cyan-N-pyrrolidine acetamide were synthesized and characterized using spectroscopic methods, thermal analysis and X-ray crystallography. Structures revealed planar cis-geometry of studied complexes. Freshly obtained Pt(DECO)₂, Pd(DECO)₂, Pt(PyrCO)₂ and Pd(PyrCO)₂ complexes were used in for in vitro cytotoxicity assays using two different etiology human cancer cell lines HeLa and WiDr cells. Investigated compounds showed cytotoxicity levels at or above cisplatin. Pt(DECO)₂ was also tested in vivo in healthy C57BL/6 mice. The complex was administered at three different dosage (0, 7.5, 15 mg/kg, i.p. once/week), over a total period of 8 weeks. No changes were observed in the animal weight in the treated mice compared to the control dextrose-treated group. The levels of erythrocytes, leukocytes, and hemoglobin were within the normal level suggesting low myelotoxicity. Negligible cardiotoxicity was observed from the histological evaluation of the hearts from the treated animals. Results from the tail nerve conduction velocity (NCV) and nerve histomorphometry suggested no impact of Pt(DECO)₂ on peripheral nerves. The complex, however, induced certain hepatotoxicity and lead to the elevation of IL-6, a pro-inflammatory cytokine. Overall, Pt(DECO)2 showed minimal in vivo toxicity, thus presenting a promising candidate for future testing in animal models of cancer.

Versatile Pt(II) Pyrazolate Complexes: Emission Tuning via Interplay of Chelate Designs and Stacking Assemblies

Three homoleptic Pt(II) metal complexes [Pt(im^Pz)₂] (1), [Pt(imⁱz)₂] (2), and [Pt(im^Mz)₂] (3) were synthesized from the treatment of Pt(DMSO)₂Cl₂ and functional imidazolyl pyrazole in refluxing tetrahydrofuran (THF). Alternatively, the heteroleptic Pt(II) complexes [Pt(im^Pz)(fppz)] (4), [Pt(imⁱz)(fppz)] (5), and [Pt(im^Mz)(fppz)] (6) were obtained from the treatment of a common intermediate [Pt(fppzH)Cl₂] with a corresponding imidazolyl chelate. Pt(II) complexes 1, 2, and 5 were studied by single-crystal X-ray diffraction to reveal the corresponding packing arrangement in their crystal lattices, among which both homoleptic complexes 1 and 2 formed monomeric species, while heteroleptic 5 aligned as a dimer with a nonbonding Pt···Pt contact of 3.574 Å. Subsequent photophysical examinations showed that the homoleptic 1-3 and heteroleptic 4-6 exhibited the structured sky-blue ππ* emission and structureless light-green-emitting metal-metal-to-ligand charge transfer (MMLCT) emission in the solid state, respectively. A shortened Pt···Pt interaction of approximately 0.34-0.35 nm was confirmed in thin films of all heteroleptic Pt(II) complexes 4-6 by grazing-incidence X-ray diffraction (GIXD) analyses. Finally, Pt(II) complex 6 was employed as a dopant in the fabrication of organic light-emitting diode (OLED) devices with varied doping ratios, among which OLEDs with only 1 wt % 6 in the SimCP host exhibited a maximum external quantum efficiency (EQE) of 5.8% and CIE_x,y values of 0.20, 0.31. In contrast, OLEDs using a nondoped architecture (i.e., 100% of 6 in the emitting layer (EML)) achieved a maximum EQE of 26.8%, current efficiency (CE) of 91.7 cd A^-1, and power efficiency (PE) of 80.1 lm·W^-1 and CIE_x,y values of 0.41, 0.55, manifesting their versatility in various degrees of stacking assemblies and hence facile color-tuning capability on OLEDs.

Optical fluorescence imaging with shortwave infrared light emitter nanomaterials for in vivo cell tracking in regenerative medicine

In vivo tracking and monitoring of adoptive cell transfer has a distinct importance in cell‐based therapy. There are many imaging modalities for in vivo monitoring of biodistribution, viability and effectiveness of transferred cells. Some of these procedures are not applicable in the human body because of low sensitivity and high possibility of tissue damages. Shortwave infrared region (SWIR) imaging is a relatively new technique by which deep biological tissues can be potentially visualized with high resolution at cellular level. Indeed, scanning of the electromagnetic spectrum (beyond 1000 nm) of SWIR has a great potential to increase sensitivity and resolution of in vivo imaging for various human tissues. In this review, molecular imaging modalities used for monitoring of biodistribution and fate of administered cells with focusing on the application of non‐invasive optical imaging at shortwave infrared region are discussed in detail.

Nanomedicine-Assisted Combination Therapy of NSCLC: New Platinum-Based Anticancer Drug Synergizes the Therapeutic Efficacy of Ganetespib

Purpose: K-RAS is the most common mutated oncogene associated with Non-Small-Cell Lung Cancer (NSCLC). So far, there are no promising chemotherapies for the direct inhibition of K-RAS, and considered to be undruggable. In this work, we have introduced a new platinum-based cyanoximate complex, Pt(MCO)2, as an anti-cancer drug to enhance the therapeutic efficacy of Hsp90 inhibitor drug, ganetespib for the combination therapy of NSCLC. Methods: We have synthesized polyacrylic acid (PAA)-coated magnetic nanoparticles (MNPs) and used as drug delivery system. These MNPs were decorated with folic acid in order to target folate receptor-expressing NSCLC. The individual and combination of drugs as well as an optical dye DiI were co-encapsulated successfully inside the PAA-coating of MNPs to evaluate synergistic treatment option for NSCLC. The magnetic resonance (MR) and optical imaging modalities assisted for the monitoring drug loading and NSCLC treatment. Results: To evaluate the therapeutic efficacy of these customized MNPs, various cell-based assays including cell viability, apoptosis and necrosis, cell migration, comet and ROS experiments were performed. Results showed minimal toxicity for functional MNPs with no therapeutic drug and more than 60% cell death within 48 h of treatment, when single drug was encapsulated. Importantly, more than 90% cells were dead when both drugs were delivered. Overall, the results indicated that the Pt(MCO)2 drug enhances the therapeutic efficacy of ganetespib by more than 30% toxicity towards the targeted treatment of NSCLC, while showed minimal toxicity to the normal healthy tissues. Conclusion: We successfully developed new dual-modal magnetic nanomedicines for the rapid and controlled release of combination of drugs for the effective treatment of NSCLC. The MR and fluorescence modalities help monitoring the delivery of drugs, where the new platinum-based drug Pt(MCO)2 synergizes the therapeutic efficacy of ganetespib.

Chemistry and applications of cyanoximes and their metal complexes

During the past three decades, considerable research effort has been dedicated to a new class of organic ligands - cyanoximes - which have the general formula NC-C([double bond, length as m-dash]NOH)-R, where R is an electron-withdrawing group. The presence of the CN group makes cyanoximes ∼10 000 times more acidic and better ligands than other known conventional monoximes and dioximes. Also, in numerous cases, this group provides extra nitrogen donor atoms to support the formation of bridges between metal centres in the obtained coordination polymers. With 36 different R groups, the most abundant is the family of mono-cyanoximes, followed by 7 bis-cyanoximes which include aromatic and aliphatic spacers and, lately, tris-cyanoxime representing a 'tripod'. The total number of obtained and characterized compounds is 44. These simple, low molecular weight molecules represent a series of new excellent ampolydentate ligands - 'molecular Lego', or building blocks - for coordination and organometallic chemistry. Uncomplexed ligands, their alkali metal salts, and metal complexes show a large spectrum of biological activity, ranging from growth regulation in plants and antimicrobial activity, to significant in vitro and in vivo cytotoxicity against human cancers. Currently, there are more than three hundred cyanoxime-based complexes, synthesized and studied using a variety of different spectroscopic methods and X-ray analysis. In this review, the preparation and stereochemistry of cyanoxime ligands, their structures and properties, and the most interesting coordination compounds with a broad spectrum of practical applications are summarized.

2-(Hydroxyimino)aldehydes: Photo- and Physicochemical Properties of a Versatile Functional Group for Monomer Design

In the context of our research on stimuli-responsive polymers bearing the 2-(hydroxyimino)aldehyde (HIA) group, we have explored the photochemical behavior and physicochemical properties of a number of HIAs. Interpretation of the experimental data is supported by quantum mechanical calculations. HIAs are expected to undergo photoisomerization, chelate metal ions, yield hydrogen-bonded dimers or oligomers, exhibit relatively low pK_a s, and form >C=NO^. radicals through OH hydrogen abstraction or oxidation of the oximate ion. Besides the well-established E/Z oxime photoisomerism, we observed a Norrish-Yang cyclization resulting in cyclobutanol oximes, to our knowledge not previously described in the literature. The acidity, bond dissociation enthalpies, and electrochemical properties of the HIAs are compared with literature data of simple oximes. The results are discussed in relation to the many potential applications for HIAs, with emphasis on the synthesis of novel HIA-containing responsive polymers.

Shortwave infrared luminescent Pt-nanowires: a mechanistic study of emission in solution and in the solid state

Several complexes of "PtL2" composition containing two cyanoxime anions - 2-oximino-2-cyano-N-piperidineacetamide (PiPCO-) and 2-oximino-2-cyano-N-morpholylacetamide (MCO-) - have been obtained and characterized both in solution and in the solid state. Complexes exist as two distinct polymorphs: monomeric yellow complexes and dark-green [PtL2]n 1D polymers, while for the MCO- anion a red, solvent containing dimeric [Pt(MCO)2·DMSO]2 complex has also been isolated. The interconversion of polymorphs was investigated. The monomeric PtL2 units are arranged into anisotropic extended solid [PtL2]n polymers with the help of PtPt metallophilic interactions. Crystal structures of monomeric PtL2 (L = PiPCO-, MCO-) and red dimeric [Pt(MCO)2·DMSO]2 complexes were determined and revealed the cis-arrangement of cyanoxime anions. The Pt-Pt distance in the "head-to-tail" red dimer was found to be 3.133 Å. The structure of the polymeric [Pt(PiPCO)2]n compound was elucidated using the EXAFS method and evidenced the formation of Pt-wires with ∼3.15 Å intermetallic separation. The EPR spectra of both 1D polymers at variable temperatures indicate the absence of Pt(iii) species. Both pure dark-green [PtL2]n polymers showed a considerable room temperature electrical conductivity of 20-30 S cm-1, which evidences the formation of a mixed valence Pt(ii)/Pt(iv) system. We discovered that these 1D polymeric [PtL2]n complexes show an intense NIR fluorescence beyond 1000 nm, while yellow monomeric PtL2 complexes are not emissive at all. The room temperature excitation spectra of 1D polymeric [PtL2]n complexes demonstrated their strong emission beyond 1000 nm regardless of the used excitation wavelength between 350 and 800 nm, which is typical of systems with delocalized charge carriers. For the first time the formation of mixed valence "metal wires" held together by metallophilic interactions is directly linked both with an intense fluorescence in the NIR region of the spectrum and with the electrical conductivity. The effect of the concentration of [PtL2]n complexes dispersed in the dielectric salt matrix on the photoluminescence wavelength and intensity was investigated. Both polymers show a quantum yield that is remarkably high for this region of the spectrum, reaching ∼2%. Variable temperature emission of polymeric [PtL2]n in the -190-+60 °C range was studied as well.

A first study on copolymers of a methacrylate containing the 2-(hydroxyimino)aldehyde group and OEGMA. RAFT polymerization and assessment of thermal and photoresponsive polymer behavior

RAFT copolymerization of 4-[(hydroxyimino)aldehyde]butyl methacrylate with OEGMA₄₇₅ and first assessment of photoisomerization and thermal behavior of the copolymers in solution.

Penetration depth of photons in biological tissues from hyperspectral imaging in shortwave infrared in transmission and reflection geometries

Measurement of photon penetration in biological tissues is a central theme in optical imaging. A great number of endogenous tissue factors such as absorption, scattering, and anisotropy affect the path of photons in tissue, making it difficult to predict the penetration depth at different wavelengths. Traditional studies evaluating photon penetration at different wavelengths are focused on tissue spectroscopy that does not take into account the heterogeneity within the sample. This is especially critical in shortwave infrared where the individual vibration-based absorption properties of the tissue molecules are affected by nearby tissue components. We have explored the depth penetration in biological tissues from 900 to 1650 nm using Monte–Carlo simulation and a hyperspectral imaging system with Michelson spatial contrast as a metric of light penetration. Chromatic aberration-free hyperspectral images in transmission and reflection geometries were collected with a spectral resolution of 5.27 nm and a total acquisition time of 3 min. Relatively short recording time minimized artifacts from sample drying. Results from both transmission and reflection geometries consistently revealed that the highest spatial contrast in the wavelength range for deep tissue lies within 1300 to 1375 nm; however, in heavily pigmented tissue such as the liver, the range 1550 to 1600 nm is also prominent.

Nanothermometry: From Microscopy to Thermal Treatments

Measuring temperature in cells and tissues remotely, with sufficient sensitivity, and in real time presents a new paradigm in engineering, chemistry and biology. Traditional sensors, such as contact thermometers, thermocouples, and electrodes, are too large to measure the temperature with subcellular resolution and are too invasive to measure the temperature in deep tissue. The new challenge requires novel approaches in designing biocompatible temperature sensors-nanothermometers-and innovative techniques for their measurements. In the last two decades, a variety of nanothermometers whose response reflected the thermal environment within a physiological temperature range have been identified as potential sensors. This review covers the principles and aspects of nanothermometer design driven by two emerging areas: single-cell thermogenesis and image guided thermal treatments. The review highlights the current trends in nanothermometry illustrated with recent representative examples.