Electrochemical and Spectroscopic Characterization of a Series of Mixed-Ligand Diruthenium Compounds

New insights into progressive ligand replacement from [Ru2Cl(O2CCH3)4]: synthetic strategies and variation in redox potentials and paramagnetic shifts

The complete series of [Ru₂Cl(Dp-FPhF)_x(O₂CCH₃)_4-x] (x = 1-4; Dp-FPhF^- = N,N'-bis(4-fluorophenyl)formamidinate) compounds, has been prepared and characterized by a multi-technique approach, including single crystal X-ray diffraction. A careful study of the different methodologies has allowed us to prepare four compounds with good yields and without an inert atmosphere or further purification. Specifically, [Ru₂Cl(Dp-FPhF)(O₂CCH₃)₃] (1) was obtained using an ultrasound-assisted (USS) method, while [Ru₂Cl(Dp-FPhF)₄] (4) was prepared by microwave assisted solvothermal synthesis (MWS). The intermediate substitution products cis-[Ru₂Cl(Dp-FPhF)₂(O₂CCH₃)₂] (2) and [Ru₂Cl(Dp-FPhF)₃(O₂CCH₃)] (3) have been prepared by conventional heating, controlling the molar ratio of the starting materials. ESI-MS and infrared spectroscopy were used to follow all the reactions and permitted a qualitative evaluation of the axial reactivity in this series. Magnetic and absorption measurements confirmed a high spin σ²π⁴δ²(π*δ*)³ electronic configuration in all cases. However, the effect of the gradual modification of the electronic density in the diruthenium core markedly affects other properties. The cyclic voltammograms of the compounds show a strong decrease in the one electron oxidation potential and an increase in the reduction potential in the series from 1 to 4. Furthermore, despite their paramagnetic nature, ¹H- and ¹⁹F-NMR spectra were recorded, and a correlation between the paramagnetic shift of the signals and the substitution degree of the diruthenium species was observed. These results provide a comprehensive guide to synthesise and understand the effects of equatorial ligand substitution on the properties of Ru₂⁵⁺ compounds.

Ultrasound-assisted synthesis of water-soluble monosubstituted diruthenium compounds

The elusive monosubstituted diruthenium complexes [Ru₂Cl(DAniF)(O₂CMe)₃] (1), [Ru₂Cl(DPhF)(O₂CMe)₃] (2), [Ru₂Cl(D-p-CNPhF)(O₂CMe)₃] (3), [Ru₂Cl(D-o-TolF)(O₂CMe)₃] (4), [Ru₂Cl(D-m-TolF)(O₂CMe)₃] (5), [Ru₂Cl(D-p-TolF)(O₂CMe)₃] (6) and [Ru₂Cl(p-TolA)(O₂CMe)₃] (7) have been synthesized using for the first time ultrasound-assisted synthesis to carry out a substitution reaction in metal-metal bonded dinuclear compounds (DAniF^- = N,N'-bis(4-anisyl)formamidinate; DPhF^- = N,N'-diphenylformamidinate; D-p-CNPhF^- = N,N'-bis(4-cyanophenyl)formamidinate; D-o/m/p-TolF^- = N,N'-bis(2/3/4-tolyl)formamidinate; p-TolA^- = N-4-tolylamidate). This is a simpler and greener method than the tedious procedures described in the literature, and it has permitted to obtain water-soluble complexes with good yields in a short period of time. A synthetic study has been implemented to find the best experimental conditions to prepare compounds 1-7. Two different types of ligands, formamidinate and amidate, have been used to check the generality of the method for the preparation of monosubstituted complexes. Five new compounds (2-6) have been obtained using a formamidinate ligand, the synthesis of the previously described compound 1 has been improved, and an unprecedented monoamidate complex has been achieved (7). The crystal structures of compounds 3 and 7 have been solved by single crystal X-ray diffraction. These compounds show the typical paddlewheel structure with three acetate ligands and one formamidinate (3) or amidate (7) bridging ligand at the equatorial positions. The axial positions are occupied by the chloride ligand giving rise to one-dimensional polymer structures that were previously unknown for monosubstituted compounds.

Structure and magnetic properties of a novel heteroheptanuclear metal string complex [Ni3Ru2Ni2(μ7-teptra)4(NCS)2](PF6)

We report the synthesis of a novel heteroheptanuclear metal string complex (HMSC) [Ni₃Ru₂Ni₂(μ₇-teptra)₄(NCS)₂](PF₆) 1 supported by tetra-pyridyl-tri-amine (H₃teptra) ligands. We employed X-ray diffraction and other spectroscopic techniques to characterize the complex. The observed remarkably short Ru-Ru distance of 2.2499(3) Å for 1 is indicative of a unique metal-metal interaction in the mixed-valence [Ru₂]⁵⁺ (S = 3/2) unit. The complex exhibits a relatively high magnetic moment value of 4.55 B.M. at 4 K, which increases rapidly to 6.00 B.M. at 30 K and remains at 6.11 B.M. from 50 to 300 K as shown by SQUID measurements, indicating a high spin (S≥ 3/2) system which is further supported by the analyses of EPR spectra at low temperatures. These magnetic behaviors can be ascribed to the result of spin-exchange interactions among multi-spin centers.

Synthesis, Structural and Physicochemical Properties of Water-Soluble Mixed-Ligand Diruthenium Complexes Containing Anilinopyridinate Bridging Ligands

A series of water-soluble Ru₂⁵⁺ complexes of the type Ru₂(O₂CCH₃)₃(L)Cl where L = 2,3,4,5,6-F₅ap, 2,4,6-F₃ap, 2-Fap, ap, 2-Meap, 2,6-Me₂ap, or 2,4,6-Me₃ap, where ap is the anilinopyridinate anion, have been characterized as to their structural and physicochemical properties in H₂O and DMSO. Five of the newly synthesized complexes were structurally characterized, and the Ru-Cl bond lengths range from 2.477 to 2.544 Å while the Ru-Ru bond lengths range from 2.2838 to 2.2935 Å. The UV-vis spectra of each compound are characterized by three absorption bands in both H₂O and DMSO, the intensity and position of which vary with both the type of bridging ligand and the solvent. The seven examined Ru₂⁵⁺ complexes exist as 1:1 electrolytes in water, and each undergoes a reversible one-electron reduction assigned to Ru₂⁵⁺/Ru₂⁴⁺ in both investigated solvents. A second irreversible reduction attributed to Ru₂⁴⁺/Ru₂³⁺ is also observed for each compound at more negative potentials in DMSO. A linear free energy relationship exists between the sum of the Hammett substituent constants (Σσ) on the ap-type bridging ligand and the wavenumber of an absorption band for the Ru₂⁵⁺ complexes. A linear relationship is also seen between Σσ and measured E_1/2 values for the Ru₂⁵⁺/Ru₂⁴⁺ process in water containing 0.1 M KCl, but little to no effect is seen between the specific bridging ligand and the structural features of the investigated compounds.

A Synthetic Oxygen Atom Transfer Photocycle from a Diruthenium Oxyanion Complex

Three new diruthenium oxyanion complexes have been prepared, crystallographically characterized, and screened for their potential to photochemically unmask a reactive Ru-Ru═O intermediate. The most promising candidate, Ru2(chp)4ONO2 (4, chp = 6-chloro-2-hydroxypyridinate), displays a set of signals centered around m/z = 733 amu in its MALDI-TOF mass spectrum, consistent with the formation of the [Ru2(chp)4O](+) ([6](+)) ion. These signals shift to 735 amu in 4*, which contains an (18)O-labeled nitrate. EPR spectroscopy and headspace GC-MS analysis indicate that NO2(•) is released upon photolysis of 4, also consistent with the formation of 6. Photolysis of 4 in CH2Cl2 at room temperature in the presence of excess PPh3 yields OPPh3 in 173% yield; control experiments implicate 6, NO2(•), and free NO3(-) as the active oxidants. Notably, Ru2(chp)4Cl (3) is recovered after photolysis. Since 3 is the direct precursor to 4, the results described herein constitute the first example of a synthetic cycle for oxygen atom transfer that makes use of light to generate a putative metal oxo intermediate.

Effect of axial ligands on the spectroscopic and electrochemical properties of diruthenium compounds

Three related diruthenium complexes containing four symmetrical anionic bridging ligands were synthesized and characterized as to their electrochemical and spectroscopic properties. The examined compounds are represented as Ru2(dpb)4Cl, Ru2(dpb)4(CO), and Ru2(dpb)4(NO) in the solid state, where dpb = diphenylbenzamidinate anion. Different forms of Ru2(dpb)4Cl are observed in solution depending on the utilized solvent and the counteranion added to solution. Each Ru2(5+) form of the compound undergoes multiple redox processes involving the dimetal unit. The reversibility as well as potentials of these diruthenium-centered electrode reactions depends upon the solvent and the bound axial ligand. The Ru2(5+/4+) and Ru2(5+/6+) processes of Ru2(dpb)4Cl were monitored by UV-vis spectroscopy in both CH2Cl2 and PhCN. A conversion of Ru2(dpb)4Cl to [Ru2(dpb)4(CO)](+) was also carried out by simply bubbling CO gas through a CH2Cl2 solution of Ru2(dpb)4Cl at room temperature. The chemically generated [Ru2(dpb)4(CO)](+) complex undergoes several electron transfer processes in CH2Cl2 containing 0.1 M TBAClO4 under a CO atmosphere, and the same reactions were seen for a chemically synthesized sample of Ru2(dpf)4(CO) in CH2Cl2, 0.1 M TBAClO4 under a N2 atmosphere, where dpf = N,N'-diphenylformamidinate anion. Ru2(dpb)4(NO) undergoes two successive one-electron reductions and a single one-electron oxidation, all of which involve the diruthenium unit. The CO and NO adducts of Ru2(dpb)4 were further characterized by FTIR spectroelectrochemistry, and the IR spectral data of these compounds are discussed in light of results for previously characterized Ru2(dpf)4(CO) and Ru2(dpf)4(NO) derivatives under similar solution conditions.

The first heteropentanuclear extended metal-atom chain: [Ni⁺-Ru₂⁵⁺-Ni²⁺-Ni²⁺ (tripyridyldiamido)₄(NCS)₂]

This study develops the first heteropentametal extended metal atom chain (EMAC) in which a string of nickel cores is incorporated with a diruthenium unit to tune the molecular properties. Spectroscopic, crystallographic, and magnetic characterizations show the formation of a fully delocalized Ru2(5+) unit. This [Ru2]-containing EMAC exhibits single-molecule conductance four-fold superior to that of the pentanickel complex and results in features of negative differential resistance (NDR), which are unobserved in analogues of pentanickel and pentaruthenium EMACs. A plausible mechanism for the NDR behavior is proposed for this diruthenium-modulated EMAC.

Synthesis, structure, and electrochemical characterization of a mixed-ligand diruthenium(III,II) complex with an unusual arrangement of the bridging ligands

A mixed-ligand metal-metal bonded diruthenium complex having the formula Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))Cl where ap is the anilinopyridinate anion was synthesized from the reaction of Ru(2)(O(2)CCH(3))(4)Cl and H(2,4,6-(CH(3))(3)ap), after which the isolated product was structurally, spectroscopically and electrochemically characterized. The crystal structure reveals an unusual arrangement of the bridging ligands around the dimetal unit where one ruthenium atom is coordinated to one anilino and two pyridyl nitrogen atoms while the other ruthenium atom is coordinated to one pyridyl and two anilino nitrogen atoms. To our knowledge, Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))Cl is the only example of a mixed-ligand diruthenium complex of the type [Ru(2)L(3)(O(2)CCH(3))](+), where L is an unsymmetrical anionic bridging ligand that has been structurally characterized with a "(2,1)" geometric conformation of the bridging ligands, all others being "(3,0)". The initial Ru(2)(5+) compound in CH(2)Cl(2) or CH(3)CN containing 0.1 M tetra-n-butylammonium perchlorate (TBAP) undergoes up to four one-electron redox processes involving the dimetal unit. The Ru(2)(5+/4+) and Ru(2)(5+/6+) processes were characterized under N(2) using thin-layer UV-visible spectroelectrochemistry and this data is compared to UV-visible spectral changes obtained during similar electrode reactions for related diruthenium compounds having the formula Ru(2)L(4)Cl or Ru(2)L(3)(O(2)CCH(3))Cl where L is an anionic bridging ligand. Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))Cl was also examined by UV-visible and FTIR spectroelectrochemistry under a CO atmosphere and two singly reduced Ru(2)(4+) species, [Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))(CO)Cl](-) and Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))(CO) were in situ generated for further characterization. The CO-bound complexes could be further reduced and exhibited additional reductions to their Ru(2)(3+) and Ru(2)(2+) oxidation states.

Chloro and azido diruthenium complexes bearing electron-rich N,N',N''-triphenylguanidinate ligands

The reaction of Ru(2)(OAc)(4)Cl with N,N',N''-triphenylguanidine (HTPG) produces one of two different compounds depending on the reaction conditions. In acetone in the presence of triethyl amine, the reaction produces tri-substituted Ru(2)(TPG)(3)(OAc)Cl, and in refluxing xylene, the tetra-substituted Ru(2)(TPG)(4)Cl is produced. Both of these new complexes can be cleanly converted into their corresponding azido analogues by reaction with sodium azide in methanol. The X-ray crystal structures of Ru(2)(TPG)(3)(OAc)Cl, Ru(2)(TPG)(3)(OAc)N(3), and Ru(2)(TPG)(4)Cl are presented, along with magnetic, electrochemical, and spectral measurements for each compound. Studies in solution show that, in contrast to Ru(2)(TPG)(3)(OAc)Cl, Ru(2)(TPG)(4)Cl is sterically hindered at the axial positions, and readily dissociates a chloride ion at high ionic strength. Equilibrium constants for chloride association and dissociation have been estimated. Mass spectrometric data suggest that the two azido complexes are precursors to new diruthenium nitrido species.