Ligands for Dinitrogen Fixation at Schrock-Type Catalysts

Reduction of N2 to NH3 catalyzed by a Keggin-type polyoxometalate-supported dual-atom catalyst

In the present paper, a polyoxometalate-supported dual-atom catalyst has been designed for the nitrogen reduction reaction based on our density functional theory calculations.

A radical mechanism for C–H bond cross-coupling and N2 activation catalysed by β-diketiminate iron complexes

Density functional theory calculations and electronic structure analyses reveal a radical mechanism with spin-crossovers for C–H bond cross-coupling and N2 activation catalysed by β-diketiminate iron complexes.

Reduction of highly bulky triphenolamine molybdenum nitrido and chloride complexes

Transition metal nitrides are key intermediates in the catalytic reduction of dinitrogen to ammonia. To date, transition metal nitride complexes with the triphenolamine (TPA) ligand have not been reported and the system with the ligand has been much less studied for ammonia formation compared with other systems. Herein, we report a series of molybdenum complexes supported by a sterically demanding TPA ligand, including a nitrido complex NMo(TPA). We achieved the stoichiometric conversion of the nitride moiety into ammonia under ambient conditions by adding proton and electron sources to NMo(TPA). However, the catalytic turnover for N₂ reduction to ammonia was not observed in the triphenolamine ligand system unlike the Schrock system-triamidoamine ligand. Density functional theory calculation revealed that the molybdenum center favors binding NH₃ over N₂ by 16.9 kcal mol^-1 and the structural lability of the trigonal bipyramidal (TBP) molybdenum complex seems to prevent catalytic turnover. Our systematic study showed that the electronegativity and bond length of ancillary ligands determine the preference between N₂ and NH₃, suggesting a systematic design strategy for improvement.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Catalytic N2-to-NH3 (or -N2H4) Conversion by Well-Defined Molecular Coordination Complexes

Nitrogen fixation, the six-electron/six-proton reduction of N₂, to give NH₃, is one of the most challenging and important chemical transformations. Notwithstanding the barriers associated with this reaction, significant progress has been made in developing molecular complexes that reduce N₂ into its bioavailable form, NH₃. This progress is driven by the dual aims of better understanding biological nitrogenases and improving upon industrial nitrogen fixation. In this review, we highlight both mechanistic understanding of nitrogen fixation that has been developed, as well as advances in yields, efficiencies, and rates that make molecular alternatives to nitrogen fixation increasingly appealing. We begin with a historical discussion of N₂ functionalization chemistry that traverses a timeline of events leading up to the discovery of the first bona fide molecular catalyst system and follow with a comprehensive overview of d-block compounds that have been targeted as catalysts up to and including 2019. We end with a summary of lessons learned from this significant research effort and last offer a discussion of key remaining challenges in the field.

Catalytic NH3 Synthesis using N2 /H2 at Molecular Transition Metal Complexes: Concepts for Lead Structure Determination using Computational Chemistry

While industrial NH₃ synthesis based on the Haber-Bosch-process was invented more than a century ago, there is still no molecular catalyst available which reduces N₂ in the reaction system N₂ /H₂ to NH₃ . As the many efforts of experimentally working research groups to develop a molecular catalyst for NH₃ synthesis from N₂ /H₂ have led to a variety of stoichiometric reductions it seems justified to undertake the attempt of systematizing the various approaches of how the N₂ molecule might be reduced to NH₃ with H₂ at a transition metal complex. In this contribution therefore a variety of intuition-based concepts are presented with the intention to show how the problem can be approached. While no claim for completeness is made, these concepts intend to generate a working plan for future research. Beyond this, it is suggested that these concepts should be evaluated with regard to experimental feasibility by checking barrier heights of single reaction steps and also by computation of whole catalytic cycles employing density functional theory (DFT) calculations. This serves as a tool which extends the empirically driven search process and expands it by computed insights which can be used to rationalize the various challenges which must be met.

Systematic Error Estimation for Chemical Reaction Energies

For a theoretical understanding of the reactivity of complex chemical systems, accurate relative energies between intermediates and transition states are required. Despite its popularity, density functional theory (DFT) often fails to provide sufficiently accurate data, especially for molecules containing transition metals. Due to the huge number of intermediates that need to be studied for all but the simplest chemical processes, DFT is, to date, the only method that is computationally feasible. Here, we present a Bayesian framework for DFT that allows for error estimation of calculated properties. Since the optimal choice of parameters in present-day density functionals is strongly system dependent, we advocate for a system-focused reparameterization. While, at first sight, this approach conflicts with the first-principles character of DFT that should make it, in principle, system independent, we deliberately introduce system dependence to be able to assign a stochastically meaningful error to the system-dependent parametrization, which makes it nonarbitrary. By reparameterizing a functional that was derived on a sound physical basis to a chemical system of interest, we obtain a functional that yields reliable confidence intervals for reaction energies. We demonstrate our approach on the example of catalytic nitrogen fixation.

Interplay between Theory and Experiment for Ammonia Synthesis Catalyzed by Transition Metal Complexes

Nitrogen fixation is an essential chemical process both biologically and industrially. Since the discovery of the first transition-metal-dinitrogen complex in 1965, a great deal of effort has been devoted to the development of artificial nitrogen fixation systems that work under mild reaction conditions. However, the transformation of chemically inert dinitrogen using homogeneous catalysts is still challenging because of the difficulty in breaking the strong triple bond of dinitrogen, and a very limited number of transition metal complexes have exhibited the catalytic activity for the direct transformation of dinitrogen into ammonia with low turnover numbers. To develop more effective nitrogen fixation systems, it is necessary to retrieve as much information as possible from the limited successful examples. Computational chemistry will provide valuable insights in the understanding of the reaction mechanisms involving unstable intermediates that are hard to isolate or characterize. We have been applying it for clarifying detailed mechanisms of dinitrogen activation and functionalization by transition metal complexes as well as for designing new catalysts for more effective nitrogen fixation. This Account summarizes recent progress in the elucidation of catalytic mechanisms of nitrogen fixation by using mono- and dinuclear molybdenum complexes, as well as cubane-type metal-sulfido clusters from a theoretical point of view. First, we briefly introduce experimental and theoretical contributions to the elucidation of the reaction mechanism of nitrogen fixation catalyzed by a mononuclear Mo-triamidoamine complex. Special attention is paid to our recent studies on Mo-catalyzed nitrogen fixation using dinitrogen-bridged dimolybdenum complexes. A possible catalytic mechanism is proposed based on theoretical and experimental investigations. The catalytic mechanism involves the formation of a monuclear molybdenum-nitride (Mo≡N) intermediate, as well as the regeneration of a dimolybdenum intermediate with the Mo-N≡N-Mo moiety. Comparison of the reactivity of di- and monomolybdenum complexes suggests that the dimolybdenum structure is essential for the catalytic activity. Synergy between the two Mo cores connected with a bridging N2 ligand is observed in the protonation of coordinated N2. Intermetallic electron transfer through the bridging N2 ligand reductively activates the coordinated N2 to be protonated. On the basis of the proposed catalytic mechanism, we used DFT calculations for rational design of dimolybdenum complexes serving as more effective catalysts for nitrogen fixation. Newly prepared dimolybdenum complexes with modified PNP-type pincer ligands exhibit greater catalytic activity than the original one.

Cyclometalated titanium and zirconium complexes stabilised by a new silylmethylene-linked tetradentate triamidophosphine

The silylmethylene-linked triamidophosphine P(CH2SiMe2NHPh)3 was isolated in form of its tri-lithium salt Li3[P(CH2SiMe2NPh)3]·2.5Et2O (1·2.5Et2O) and employed for the synthesis of titanium and zirconium complexes. Starting from 1·2.5Et2O, the chlorido complexes [κ(4)-N,N,N,P-PN3]MCl (4-M, M = Ti, Zr) were prepared and examined with respect to alkylation. Upon reaction of 4-Ti with (trimethylsilyl)methyl lithium, intra-ligand cyclometalation at one of the ortho-N-phenyl positions was observed and the resulting thermally stable titanazetidine [κ(5)-N,N,N,P,C-N2P(NC)]Ti (5-Ti) isolated. Similarly, the related zirconazetidine [κ(5)-N,N,N,P,C-N2P(NC)]Zr(THF) (5-Zr) was isolated upon reaction of 4-Zr with Bn2Mg(THF)2. Using LiCH2PMe2 as alkyl transfer reagent, both complexes 4-M were converted to the corresponding phosphametallacyclopropanes [κ(4)-N,N,N,P-PN3]M(κ(2)-C,P-CH2PMe2) (7-M, M = Ti, Zr). Upon gentle heating, complexes 7-M were cleanly converted to the cyclometalated species 5-M and trimethylphosphine. These results are discussed in the context of related amidophosphine and triamidoamine complexes.

NH3 Synthesis in the N2/H2 Reaction System using Cooperative Molecular Tungsten/Rhodium Catalysis in Ionic Hydrogenation: A DFT Study

The ionic hydrogenation of N2 with H2 to give NH3 is investigated by means of density functional theory (DFT) computations using a cooperatively acting catalyst system. In this system, N2 binds to a neutral tungsten pincer complex of the type [(PNP)W(N2)3] (PNP=pincer ligand) and is reduced to NH3. The protons and hydride centers necessary for the reduction are delivered by heterolytic cleavage of H2 between the N2-tungsten complex and the cationic rhodium complex [Cp*Rh{2-(2-pyridyl)phenyl}(CH3 CN)](+). Successive transfer of protons and hydrides to the bound N2, as well as all Nx Hy units that occur during the reaction, enable the computation of closed catalytic cycles in the gas and in the solvent phase. By optimizing the pincer ligands of the tungsten complex, energy spans as low as 39.3 kcal mol(-1) could be obtained, which is unprecedented in molecular catalysis for the N2/H2 reaction system.

Structural analysis of the coordination of dinitrogen to transition metal complexes

Transition-metal complexes show a wide variety of coordination modes for the nitrogen molecule. A structural database study has been undertaken for dinitrogen complexes, and geometrical parameters around the L(n)M-N2 unit are retrieved from the Cambridge Structural Database. These data were classified in families of compounds, according to metal properties, to determine the degree of lengthening for the dinitrogen bonding. The importance of the nature of the metal center, such as coordination number and electronic configuration, is reported. Our study reveals poor activation by coordination of dinitrogen in mononuclear complexes, always having end-on coordination. However, partial weakening of nitrogen-nitrogen bonding is found for end-on binuclear complexes, whereas side-on complexes can be completely activated.

On the electronic structure and photochemistry of coordinatively unsaturated complexes: the case of nickel bis-dinitrogen, Ni(N2 )2

The electronic ground and excited states of the coordinatively unsaturated complex Ni(η(1) -N2 )2 , isolated in an Ar matrix, are analyzed in detail by vibrational and electronic absorption and emission spectroscopies allied with quantum chemical calculations. The bond force constants are determined from a normal coordinate analysis and compared with those of the isoelectronic carbonyl complex. The consequences for the bond properties are discussed, and the trend in the force constants is compared with the standard formation enthalpies. The linear complex Ni(η(1) -N2 )2 with two terminal dinitrogen ligands can be photoisomerized to two isomeric, metastable forms Ni(η(1) -N2 )(η(2) -N2 ) and Ni(η(2) -N2 )2 , with one and two side-on coordinated dinitrogen ligands, respectively.

A tripodal benzylene-linked trisamidophosphine ligand scaffold: synthesis and coordination chemistry with group(IV) metals

A new tripodal trisamidophosphine ligand (1) based on the trisbenzylphosphine backbone has been synthesized in three steps starting from NaPH2 and phthaloyl-protected 2-aminobenzyl bromide. At elevated temperatures, 1 reacts directly with M(NMe2)4 (M = Zr, Hf) to afford the dimethylamido complexes [PN3]M(NMe2) (M = Zr, Hf) (2), which are easily converted into the corresponding triflates [PN3]MOTf (M = Zr, Hf) (3) via reaction with triethylsilyl trifluoromethanesulfonate. The related titanium chloro complex [PN3]TiCl (4-Ti) is obtained from 1 and Bn3TiCl via protonolysis. Triple deprotonation of 1 with n-butyllithium affords the tris-lithium salt Li3[PN3] (1-Li), which serves as a common starting material for the preparation of all the group(IV) chlorides [PN3]MCl (M = Ti, Zr, Hf) (4). Upon treatment of 4-Ti with Bn2Mg(thf)2, formation of a benzyltitanium species is observed, which is converted cleanly into a ligand-CH-activated species (5-Ti).

Studying chemical reactivity in a virtual environment

Chemical reactivity of a set of reactants is determined by its potential (electronic) energy (hyper)surface. The high dimensionality of this surface renders it difficult to efficiently explore reactivity in a large reactive system. Exhaustive sampling techniques and search algorithms are not straightforward to employ as it is not clear which explored path will eventually produce the minimum energy path of a reaction passing through a transition structure. Here, the chemist's intuition would be of invaluable help, but it cannot be easily exploited because (1) no intuitive and direct tool for the scientist to manipulate molecular structures is currently available and because (2) quantum chemical calculations are inherently expensive in terms of computational effort. In this work, we elaborate on how the chemist can be reintroduced into the exploratory process within a virtual environment that provides immediate feedback and intuitive tools to manipulate a reactive system. We work out in detail how this immersion should take place. We provide an analysis of modern semi-empirical methods which already today are candidates for the interactive study of chemical reactivity. Implications of manual structure manipulations for their physical meaning and chemical relevance are carefully analysed in order to provide sound theoretical foundations for the interpretation of the interactive reactivity exploration.

Theoretical studies of homogeneous catalysts mimicking nitrogenase

The conversion of molecular nitrogen to ammonia is a key biological and chemical process and represents one of the most challenging topics in chemistry and biology. In Nature the Mo-containing nitrogenase enzymes perform nitrogen 'fixation' via an iron molybdenum cofactor (FeMo-co) under ambient conditions. In contrast, industrially, the Haber-Bosch process reduces molecular nitrogen and hydrogen to ammonia with a heterogeneous iron catalyst under drastic conditions of temperature and pressure. This process accounts for the production of millions of tons of nitrogen compounds used for agricultural and industrial purposes, but the high temperature and pressure required result in a large energy loss, leading to several economic and environmental issues. During the last 40 years many attempts have been made to synthesize simple homogeneous catalysts that can activate dinitrogen under the same mild conditions of the nitrogenase enzymes. Several compounds, almost all containing transition metals, have been shown to bind and activate N₂ to various degrees. However, to date Mo(N₂)(HIPTN)₃N with (HIPTN)₃N= hexaisopropyl-terphenyl-triamidoamine is the only compound performing this process catalytically. In this review we describe how Density Functional Theory calculations have been of help in elucidating the reaction mechanisms of the inorganic compounds that activate or fix N₂. These studies provided important insights that rationalize and complement the experimental findings about the reaction mechanisms of known catalysts, predicting the reactivity of new potential catalysts and helping in tailoring new efficient catalytic compounds.