Solution Synthesis and Characterization of Indium−Zinc Formate Precursors for Transparent Conducting Oxides

Highly transparent and conductive Al-doped ZnO nanoparticulate thin films using direct write processing

Solution processable Al-doped ZnO (AZO) thin films are attractive candidates for low cost transparent electrodes. We demonstrate here an optimized nanoparticulate ink for the fabrication of AZO thin films using scalable, low-cost direct write processing (ultrasonic spray deposition) in air at atmospheric pressure. The thin films were made via thermal processing of as-deposited films. AZO films deposited using the proposed nanoparticulate ink with further reducing in vacuum and rf plasma of forming gas exhibited optical transparency greater than 95% across the visible spectrum, and electrical resistivity of 0.5 Ω cm and it drops down to 7.0 × 10(-2) Ω cm after illuminating with UV light, which is comparable to commercially available tin doped indium oxide colloidal coatings. Various structural analyses were performed to investigate the influence of ink chemistry, deposition parameters, and annealing temperatures on the structural, optical, and electrical characteristics of the spray deposited AZO thin films. Optical micrographs confirmed the presence of surface defects and cracks using the AZO NPs ink without any additives. After adding N-(2-Aminoethyl)-3-aminopropylmethyldimethoxy silane to the ink, AZO films exhibited an optical transparency which was virtually identical to that of the plain glass substrate.

Solution processing of transparent conductors: from flask to film

This critical review focuses on the solution deposition of transparent conductors with a particular focus on transparent conducting oxide (TCO) thin-films. TCOs play a critical role in many current and emerging opto-electronic devices due to their unique combination of electronic conductivity and transparency in the visible region of the spectrum. Atmospheric-pressure solution processing is an attractive alternative to conventional vacuum-based deposition methods due to its ease of fabrication, scalability, and potential to lower device manufacturing costs. An introduction into the applications of and material criteria for TCOs will be presented first, followed by a discussion of solution routes to these systems. Recent studies in the field will be reviewed according to their materials system. Finally, the challenges and opportunities for further enabling research will be discussed in terms of emerging oxide systems and non-oxide based transparent conductors (341 references).